From: Felipe Balbi <balbi@xxxxxx>
The way our code was written, we should never have
a DWC3_EP_PENDING_REQUEST flag set out of a Data Phase
and the code in __dwc3_gadget_ep0_queue() did not
reflect that situation properly.
Tidy up that case to avoid any possible mistakes
when starting requests for IRQs which are long
gone.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
drivers/usb/dwc3/ep0.c | 14 ++++----------
1 files changed, 4 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 2f51de5..74a3828 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -149,20 +149,14 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
direction = !!(dep->flags & DWC3_EP0_DIR_IN);
- if (dwc->ep0state == EP0_STATUS_PHASE) {
- type = dwc->three_stage_setup
- ? DWC3_TRBCTL_CONTROL_STATUS3
- : DWC3_TRBCTL_CONTROL_STATUS2;
- } else if (dwc->ep0state == EP0_DATA_PHASE) {
- type = DWC3_TRBCTL_CONTROL_DATA;
- } else {
- /* should never happen */
- WARN_ON(1);
+ if (dwc->ep0state != EP0_DATA_PHASE) {
+ dev_WARN(dwc->dev, "Unexpected pending request\n");
return 0;
}
ret = dwc3_ep0_start_trans(dwc, direction,
- req->request.dma, req->request.length, type);
+ req->request.dma, req->request.length,
+ DWC3_TRBCTL_CONTROL_DATA);
dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
DWC3_EP0_DIR_IN);
} else if (dwc->delayed_status) {
--
1.7.8.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
