Hi there! I'm running a VDR installation on an Asus EEE PC 701. This is what I get once (sometimes twice) a day: Feb 3 14:13:20 localhost vdr: [14791] changing pids of channel 1223 from 33+33=27:0;36=@106:0:0 to 33+33=27:0;36=@106:0:0 Feb 3 14:13:40 localhost vdr: [14791] changing pids of channel 119 from 255+255=27:0;259=deu@106:0:32 to 255+255=27:0;259=deu@106:0:32 Feb 3 14:13:40 localhost vdr: [14791] changing pids of channel 118 from 511+511=27:0;515=deu@106:0:33 to 511+511=27:0;515=deu@106:0:33 Feb 3 14:13:40 localhost vdr: [14791] changing pids of channel 120 from 767+767=27:0;771=deu@106:0:34 to 767+767=27:0;771=deu@106:0:34 Feb 3 14:13:40 localhost vdr: [14791] changing pids of channel 117 from 1023+1023=27:0;1027=deu@106:0:35 to 1023+1023=27:0;1027=deu@106:0:35 Feb 3 14:14:03 localhost vdr: [14791] changing pids of channel 131 from 1535+1535=2:1536=deu@3:0:32 to 1535+1535=2:1536=deu@3,1537=eng@3:0:32 Feb 3 14:14:23 localhost vdr: [14791] read incomplete section - len = 93, r = 555 Feb 3 14:14:32 localhost kernel: [232621.634959] ehci_hcd 0000:00:1d.7: fatal error Feb 3 14:14:32 localhost kernel: [232621.634981] ehci_hcd 0000:00:1d.7: fatal command 0010020 (park)=0 ithresh=1 Async period=1024 HALT Feb 3 14:14:32 localhost kernel: [232621.634996] ehci_hcd 0000:00:1d.7: fatal status b019 Async Recl Halt FATAL FLR INT Feb 3 14:14:32 localhost kernel: [232621.635003] ehci_hcd 0000:00:1d.7: reset command 0010022 (park)=0 ithresh=1 Async period=1024 Reset HALT Feb 3 14:14:32 localhost kernel: [232621.635003] ehci_hcd 0000:00:1d.7: HC died; cleaning up Feb 3 14:14:32 localhost kernel: [232621.641933] hub 1-0:1.0: state 0 ports 8 chg 0000 evt 0000 Feb 3 14:14:32 localhost kernel: [232621.641948] usb 1-3: USB disconnect, device number 2 Feb 3 14:14:32 localhost kernel: [232621.641956] usb 1-3: unregistering device Feb 3 14:14:32 localhost kernel: [232621.641964] usb 1-3: unregistering interface 1-3:1.0 Feb 3 14:14:32 localhost kernel: [232621.750055] sd 5:0:0:0: [sdc] Unhandled error code Feb 3 14:14:32 localhost kernel: [232621.750068] sd 5:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK Feb 3 14:14:32 localhost kernel: [232621.750084] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 53 58 f8 00 00 f0 00 Feb 3 14:14:32 localhost kernel: [232621.750115] end_request: I/O error, dev sdc, sector 5462264 The Netbook always runs with its power supply plugged in. Besides this error, the VDR runs fine. But it's not reliable. I have to reboot it daily. I also enabled "USB verbose debug messages" in the kernel but the messages above is all I got. The EEE PC has 3 USB connectors. It doesn't matter where I plug in the devices. I also tried new (better) USB cables. No change. Is there a way to find out why this happens? Christian # uname -a Linux localhost 3.2.0-gentoo-r1 #2 SMP Wed Jan 18 17:03:36 CET 2012 i686 Intel(R) Celeron(R) M processor 900MHz GenuineIntel GNU/Linux # lspci 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04) 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04) 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) 00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04) 00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04) 00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) 03:00.0 Ethernet controller: Attansic Technology Corp. L2 100 Mbit Ethernet Adapter (rev a0) # lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 9022:d660 TeVii Technology Ltd. DVB-S2 S660 Bus 001 Device 003: ID 04fc:0c15 Sunplus Technology Co., Ltd SPIF215A SATA bridge Bus 001 Device 004: ID 0951:1606 Kingston Technology Bus 001 Device 005: ID eb1a:2761 eMPIA Technology, Inc. EeePC 701 integrated Webcam -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
