[PATCHv11 06/19] usb: otg: gpio_vbus: Start using struct usb_otg

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use struct usb_otg members with OTG specific functions instead
of usb_phy members.

Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Reviewed-by: Marek Vasut <marek.vasut@xxxxxxxxx>
Cc: Philipp Zabel <philipp.zabel@xxxxxxxxx>
---
 drivers/usb/otg/gpio_vbus.c |   61 +++++++++++++++++++++++++-----------------
 1 files changed, 36 insertions(+), 25 deletions(-)

diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c
index 4e1b138..3ece43a 100644
--- a/drivers/usb/otg/gpio_vbus.c
+++ b/drivers/usb/otg/gpio_vbus.c
@@ -32,7 +32,7 @@
  * Needs to be loaded before the UDC driver that will use it.
  */
 struct gpio_vbus_data {
-	struct usb_phy		otg;
+	struct usb_phy		phy;
 	struct device          *dev;
 	struct regulator       *vbus_draw;
 	int			vbus_draw_enabled;
@@ -98,7 +98,7 @@ static void gpio_vbus_work(struct work_struct *work)
 	struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data;
 	int gpio;
 
-	if (!gpio_vbus->otg.gadget)
+	if (!gpio_vbus->phy.otg->gadget)
 		return;
 
 	/* Peripheral controllers which manage the pullup themselves won't have
@@ -108,8 +108,8 @@ static void gpio_vbus_work(struct work_struct *work)
 	 */
 	gpio = pdata->gpio_pullup;
 	if (is_vbus_powered(pdata)) {
-		gpio_vbus->otg.state = OTG_STATE_B_PERIPHERAL;
-		usb_gadget_vbus_connect(gpio_vbus->otg.gadget);
+		gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL;
+		usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget);
 
 		/* drawing a "unit load" is *always* OK, except for OTG */
 		set_vbus_draw(gpio_vbus, 100);
@@ -124,8 +124,8 @@ static void gpio_vbus_work(struct work_struct *work)
 
 		set_vbus_draw(gpio_vbus, 0);
 
-		usb_gadget_vbus_disconnect(gpio_vbus->otg.gadget);
-		gpio_vbus->otg.state = OTG_STATE_B_IDLE;
+		usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget);
+		gpio_vbus->phy.state = OTG_STATE_B_IDLE;
 	}
 }
 
@@ -135,12 +135,13 @@ static irqreturn_t gpio_vbus_irq(int irq, void *data)
 	struct platform_device *pdev = data;
 	struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data;
 	struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
+	struct usb_otg *otg = gpio_vbus->phy.otg;
 
 	dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n",
 		is_vbus_powered(pdata) ? "supplied" : "inactive",
-		gpio_vbus->otg.gadget ? gpio_vbus->otg.gadget->name : "none");
+		otg->gadget ? otg->gadget->name : "none");
 
-	if (gpio_vbus->otg.gadget)
+	if (otg->gadget)
 		schedule_work(&gpio_vbus->work);
 
 	return IRQ_HANDLED;
@@ -149,15 +150,15 @@ static irqreturn_t gpio_vbus_irq(int irq, void *data)
 /* OTG transceiver interface */
 
 /* bind/unbind the peripheral controller */
-static int gpio_vbus_set_peripheral(struct usb_phy *otg,
-				struct usb_gadget *gadget)
+static int gpio_vbus_set_peripheral(struct usb_otg *otg,
+					struct usb_gadget *gadget)
 {
 	struct gpio_vbus_data *gpio_vbus;
 	struct gpio_vbus_mach_info *pdata;
 	struct platform_device *pdev;
 	int gpio, irq;
 
-	gpio_vbus = container_of(otg, struct gpio_vbus_data, otg);
+	gpio_vbus = container_of(otg->phy, struct gpio_vbus_data, phy);
 	pdev = to_platform_device(gpio_vbus->dev);
 	pdata = gpio_vbus->dev->platform_data;
 	irq = gpio_to_irq(pdata->gpio_vbus);
@@ -174,7 +175,7 @@ static int gpio_vbus_set_peripheral(struct usb_phy *otg,
 		set_vbus_draw(gpio_vbus, 0);
 
 		usb_gadget_vbus_disconnect(otg->gadget);
-		otg->state = OTG_STATE_UNDEFINED;
+		otg->phy->state = OTG_STATE_UNDEFINED;
 
 		otg->gadget = NULL;
 		return 0;
@@ -189,23 +190,23 @@ static int gpio_vbus_set_peripheral(struct usb_phy *otg,
 }
 
 /* effective for B devices, ignored for A-peripheral */
-static int gpio_vbus_set_power(struct usb_phy *otg, unsigned mA)
+static int gpio_vbus_set_power(struct usb_phy *phy, unsigned mA)
 {
 	struct gpio_vbus_data *gpio_vbus;
 
-	gpio_vbus = container_of(otg, struct gpio_vbus_data, otg);
+	gpio_vbus = container_of(phy, struct gpio_vbus_data, phy);
 
-	if (otg->state == OTG_STATE_B_PERIPHERAL)
+	if (phy->state == OTG_STATE_B_PERIPHERAL)
 		set_vbus_draw(gpio_vbus, mA);
 	return 0;
 }
 
 /* for non-OTG B devices: set/clear transceiver suspend mode */
-static int gpio_vbus_set_suspend(struct usb_phy *otg, int suspend)
+static int gpio_vbus_set_suspend(struct usb_phy *phy, int suspend)
 {
 	struct gpio_vbus_data *gpio_vbus;
 
-	gpio_vbus = container_of(otg, struct gpio_vbus_data, otg);
+	gpio_vbus = container_of(phy, struct gpio_vbus_data, phy);
 
 	/* draw max 0 mA from vbus in suspend mode; or the previously
 	 * recorded amount of current if not suspended
@@ -213,7 +214,7 @@ static int gpio_vbus_set_suspend(struct usb_phy *otg, int suspend)
 	 * NOTE: high powered configs (mA > 100) may draw up to 2.5 mA
 	 * if they're wake-enabled ... we don't handle that yet.
 	 */
-	return gpio_vbus_set_power(otg, suspend ? 0 : gpio_vbus->mA);
+	return gpio_vbus_set_power(phy, suspend ? 0 : gpio_vbus->mA);
 }
 
 /* platform driver interface */
@@ -233,13 +234,21 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
 	if (!gpio_vbus)
 		return -ENOMEM;
 
+	gpio_vbus->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
+	if (!gpio_vbus->phy.otg) {
+		kfree(gpio_vbus);
+		return -ENOMEM;
+	}
+
 	platform_set_drvdata(pdev, gpio_vbus);
 	gpio_vbus->dev = &pdev->dev;
-	gpio_vbus->otg.label = "gpio-vbus";
-	gpio_vbus->otg.state = OTG_STATE_UNDEFINED;
-	gpio_vbus->otg.set_peripheral = gpio_vbus_set_peripheral;
-	gpio_vbus->otg.set_power = gpio_vbus_set_power;
-	gpio_vbus->otg.set_suspend = gpio_vbus_set_suspend;
+	gpio_vbus->phy.label = "gpio-vbus";
+	gpio_vbus->phy.set_power = gpio_vbus_set_power;
+	gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend;
+	gpio_vbus->phy.state = OTG_STATE_UNDEFINED;
+
+	gpio_vbus->phy.otg->phy = &gpio_vbus->phy;
+	gpio_vbus->phy.otg->set_peripheral = gpio_vbus_set_peripheral;
 
 	err = gpio_request(gpio, "vbus_detect");
 	if (err) {
@@ -288,7 +297,7 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
 	}
 
 	/* only active when a gadget is registered */
-	err = otg_set_transceiver(&gpio_vbus->otg);
+	err = usb_set_transceiver(&gpio_vbus->phy);
 	if (err) {
 		dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
 			err);
@@ -304,6 +313,7 @@ err_irq:
 	gpio_free(pdata->gpio_vbus);
 err_gpio:
 	platform_set_drvdata(pdev, NULL);
+	kfree(gpio_vbus->phy.otg);
 	kfree(gpio_vbus);
 	return err;
 }
@@ -316,13 +326,14 @@ static int __exit gpio_vbus_remove(struct platform_device *pdev)
 
 	regulator_put(gpio_vbus->vbus_draw);
 
-	otg_set_transceiver(NULL);
+	usb_set_transceiver(NULL);
 
 	free_irq(gpio_to_irq(gpio), &pdev->dev);
 	if (gpio_is_valid(pdata->gpio_pullup))
 		gpio_free(pdata->gpio_pullup);
 	gpio_free(gpio);
 	platform_set_drvdata(pdev, NULL);
+	kfree(gpio_vbus->phy.otg);
 	kfree(gpio_vbus);
 
 	return 0;
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux