Linux RAID Storage Date Index

• Thread Index

• Re: Problem with auto-assembling raid1 on system start
  • From: Tobias Gunkel <tobias.gunkel@xxxxxxxxx>
• Re: Problem with auto-assembling raid1 on system start
  • From: CoolCold <coolthecold@xxxxxxxxx>
• Problem with auto-assembling raid1 on system start
  • From: Tobias Gunkel <tobias.gunkel@xxxxxxxxx>
• Re: Hot spare rebuild did not start.
  • From: "NeilBrown" <neilb@xxxxxxx>
• Hot spare rebuild did not start.
  • From: "Simon Jackson" <sjackson@xxxxxxxxxxx>
• RE: RAID 1 resync with both members good.
  • From: "Simon Jackson" <sjackson@xxxxxxxxxxx>
• Re: RAID 1 resync with both members good.
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: mdadm issue adding components to an array (avail_size / array_size issue).
  • From: "NeilBrown" <neilb@xxxxxxx>
• Re: RAID 1 resync with both members good.
  • From: "NeilBrown" <neilb@xxxxxxx>
• Re: Incorrect in-kernel bitmap on raid10
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Re: RAID 1 resync with both members good.
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Re: RAID 1 resync with both members good.
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: [PATCH] md: Track raid5/6 statistics
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: mdadm issue adding components to an array (avail_size / array_size issue).
  • From: Benjamin ESTRABAUD <be@xxxxxxxxxx>
• mdadm issue adding components to an array (avail_size / array_size issue).
  • From: Benjamin ESTRABAUD <be@xxxxxxxxxx>
• RAID 1 resync with both members good.
  • From: "Simon Jackson" <sjackson@xxxxxxxxxxx>
• [PULL REQUEST] md updates for 2.6.30
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [md PATCH 6/7] md: remove ability to explicit set an inactive array to 'clean'.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH] md: Track raid5/6 statistics
  • From: Jody McIntyre <scjody@xxxxxxx>
• Re: [md PATCH 6/7] md: remove ability to explicit set an inactive array to 'clean'.
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Michal Soltys <soltys@xxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Rudy Zijlstra <rudy@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Query regarding stripe management in linux md-raid
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: [md PATCH 6/7] md: remove ability to explicit set an inactive array to 'clean'.
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: 32bit variables on >2T arrays
  • From: "NeilBrown" <neilb@xxxxxxx>
• [md PATCH 7/7] md: remove rd%d links immediately after stopping an array.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 6/7] md: remove ability to explicit set an inactive array to 'clean'.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 5/7] md: constify VFTs
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 4/7] md: tidy up status_resync to handle large arrays.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 3/7] md: fix some (more) errors with bitmaps on devices larger than 2TB.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 2/7] md/raid10: don't clear bitmap during recovery if array will still be degraded.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 1/7] md: fix loading of out-of-date bitmap.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 0/7] more md patches heading for 2.6.20
  • From: NeilBrown <neilb@xxxxxxx>
• RE: md extension to support booting from raid whole disks.
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• Re: Configure speed of checkarray in mdadm?
  • From: Thomas Backlund <tmb@xxxxxxxxxxxx>
• RE: md extension to support booting from raid whole disks.
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Configure speed of checkarray in mdadm?
  • From: David Vuorio <vuorio@xxxxxx>
• Re: 32bit variables on >2T arrays
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• 32bit variables on >2T arrays
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• raid0 hashing funtion
  • From: Raz <raziebe@xxxxxxxxx>
• Re: Incorrect in-kernel bitmap on raid10
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• BUG?: MD UUIDs changed?
  • From: Peter Mairhofer <63832452@xxxxxxx>
• Re: BUG: Bad page state in process md1_resync pfn:50ab4
  • From: "NeilBrown" <neilb@xxxxxxx>
• Re: BUG: Bad page state in process md1_resync pfn:50ab4
  • From: Anssi Kolehmainen <anssi@xxxxxxxxxx>
• BUG: Bad page state in process md1_resync pfn:50ab4
  • From: Anssi Kolehmainen <anssi@xxxxxxxxxx>
• RE: md extension to support booting from raid whole disks.
  • From: "NeilBrown" <neilb@xxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: md extension to support booting from raid whole disks.
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: Incorrect in-kernel bitmap on raid10
  • From: "NeilBrown" <neilb@xxxxxxx>
• Subject: [002/002 ] raid0 reshape. mdadm
  • From: raz ben yehuda <raziebe@xxxxxxx>
• Subject: [001/002 ] raid0 reshape
  • From: raz ben yehuda <raziebe@xxxxxxx>
• Re: Incorrect in-kernel bitmap on raid10
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Michał Przyłuski <mikylie@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: Query regarding stripe management in linux md-raid
  • From: Kunal Kushwaha <kunal.kushwaha@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Rudy Zijlstra <rudy@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Query regarding stripe management in linux md-raid
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Incorrect in-kernel bitmap on raid10
  • From: "NeilBrown" <neilb@xxxxxxx>
• Re: md extension to support booting from raid whole disks, raid6, grub2, lvm2
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Incorrect in-kernel bitmap on raid10
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Re: Spares Missing event in case of spare group?
  • From: Jan Ceuleers <jan.ceuleers@xxxxxxxxxxxx>
• Re: Incorrect in-kernel bitmap on raid10
  • From: Neil Brown <neilb@xxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: RAID halting
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Gabor Gombas <gombasg@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks, raid6, grub2, lvm2
  • From: Michael Ole Olsen <gnu@xxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: RAID halting
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Query regarding stripe management in linux md-raid
  • From: Kunal Kushwaha <kunal.kushwaha@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Gabor Gombas <gombasg@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Gabor Gombas <gombasg@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• Re: [rfc] Proof-of-concept: refactoring raid6 recovery for the async case
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: array_state_store: 'inactive' versus 'clean' race
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: array_state_store: 'inactive' versus 'clean' race
  • From: Neil Brown <neilb@xxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• [rfc] Proof-of-concept: refactoring raid6 recovery for the async case
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Query regarding stripe management in linux md-raid
  • From: Neil Brown <neilb@xxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• RE: RAID halting
  • From: <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: array_state_store: 'inactive' versus 'clean' race
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Incorrect in-kernel bitmap on raid10
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Query regarding stripe management in linux md-raid
  • From: Kunal Kushwaha <kunal.kushwaha@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: array_state_store: 'inactive' versus 'clean' race
  • From: Neil Brown <neilb@xxxxxxx>
• array_state_store: 'inactive' versus 'clean' race
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: md extension to support booting from raid whole disks.
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Michal Soltys <soltys@xxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• Re: Performance of a software raid 5
  • From: Johannes Segitz <johannes.segitz@xxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• Re: RAID halting
  • From: Michał Przyłuski <mikylie@xxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: RAID halting
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: RAID halting
  • From: CoolCold <coolthecold@xxxxxxxxx>
• Re: RAID halting
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: RAID halting
  • From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: RAID halting
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• RE: RAID halting
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• RAID5 assembles with wrong array size
  • From: Joel Means <means.joel@xxxxxxxxx>
• Re: Performance of a software raid 5
  • From: Johannes Segitz <johannes.segitz@xxxxxxxxx>
• md extension to support booting from raid whole disks.
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: RAID halting
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Using linux software raid (mdadm) in a shared-disk cluster.
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Poor write performance with write-intent bitmap?
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• mdadm: Raid level 10 not permitted with --build ?
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• Re: Using linux software raid (mdadm) in a shared-disk cluster.
  • From: John Hughes <john@xxxxxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: Poor write performance with write-intent bitmap?
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: Poor write performance with write-intent bitmap?
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• Re: Performance of a software raid 5
  • From: Corey Hickey <bugfood-ml@xxxxxxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: Incorrect in-kernel bitmap on raid10
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• RE: what superblock to use
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Poor write performance with write-intent bitmap?
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: Poor write performance with write-intent bitmap?
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Poor write performance with write-intent bitmap?
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Performance of a software raid 5
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Poor write performance with write-intent bitmap?
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Performance of a software raid 5
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Using linux software raid (mdadm) in a shared-disk cluster.
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Performance of a software raid 5
  • From: Corey Hickey <bugfood-ml@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: what superblock to use
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Poor write performance with write-intent bitmap?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: what superblock to use
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Performance of a software raid 5
  • From: Johannes Segitz <johannes.segitz@xxxxxxxxx>
• Re: Poor write performance with write-intent bitmap?
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Michal Soltys <soltys@xxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Gabor Gombas <gombasg@xxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: md: constify VFTs
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Poor write performance with write-intent bitmap?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Performance of a software raid 5
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH] mdadm: allow build to use --size
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Poor write performance with write-intent bitmap?
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: Performance of a software raid 5
  • From: Johannes Segitz <johannes.segitz@xxxxxxxxx>
• Re: Poor write performance with write-intent bitmap?
  • From: "NeilBrown" <neilb@xxxxxxx>
• Re: Performance of a software raid 5
  • From: "NeilBrown" <neilb@xxxxxxx>
• Re: Performance of a software raid 5
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: Performance of a software raid 5
  • From: Johannes Segitz <johannes.segitz@xxxxxxxxx>
• Re: Performance of a software raid 5
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Poor write performance with write-intent bitmap?
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: Performance of a software raid 5
  • From: Johannes Segitz <johannes.segitz@xxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• Re: Performance of a software raid 5
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: what superblock to use
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• RE: [Patch] mdadm ignoring homehost?
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: what superblock to use
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: Spares Missing event in case of spare group?
  • From: Jan Ceuleers <jan.ceuleers@xxxxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: RAID without superblock
  • From: Christopher Chen <muffaleta@xxxxxxxxx>
• Re: RAID without superblock
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Performance of a software raid 5
  • From: Johannes Segitz <johannes.segitz@xxxxxxxxx>
• Re: what superblock to use
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Re: what superblock to use
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: what superblock to use
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• what superblock to use
  • From: Farkas Levente <lfarkas@xxxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Race condition in write_sb_page?
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• [PULL REQUEST] a few more md patches for 2.6.30
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Neil Brown <neilb@xxxxxxx>
• mdadm "--examine" & "--detail" report different metadata version info for same array
  • From: PGNet <pgnet.trash+raid@xxxxxxxxx>
• Re: RAID without superblock
  • From: Tapani Tarvainen <raid@xxxxxxxxxxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Race condition in write_sb_page? (was: Re: Incorrect in-kernel bitmap on raid10)
  • From: "NeilBrown" <neilb@xxxxxxx>
• Race condition in write_sb_page? (was: Re: Incorrect in-kernel bitmap on raid10)
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Re: RAID without superblock
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: Incorrect in-kernel bitmap on raid10
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Incorrect in-kernel bitmap on raid10
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Re: RAID without superblock
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: RAID without superblock
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: RAID without superblock
  • From: "NeilBrown" <neilb@xxxxxxx>
• Re: Spares Missing event in case of spare group?
  • From: "NeilBrown" <neilb@xxxxxxx>
• Spares Missing event in case of spare group?
  • From: Jan Ceuleers <jan.ceuleers@xxxxxxxxxxxx>
• RAID without superblock
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Incorrect in-kernel bitmap on raid10
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: "NeilBrown" <neilb@xxxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: RAID 10 array won't assemble ... spare ... metadata - Correction Disappointing Report Back
  • From: Dave Fisher <davef@xxxxxxxxxxxxxxxx>
• Re: RAID 10 array won't assemble ... spare ... metadata - Disappointing Report Back
  • From: Dave Fisher <davef@xxxxxxxxxxxxxxxx>
• Incorrect in-kernel bitmap on raid10
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Jon Nelson <jnelson-linux-raid@xxxxxxxxxxx>
• Re: RAID 10 array won't assemble, all devices marked spare, confusing mdadm metadata
  • From: Dave Fisher <davef@xxxxxxxxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: Jesper Juhl <jj@xxxxxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• [patch] md.c release locks on error
  • From: Dan Carpenter <error27@xxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: Prakash Punnoor <prakash@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: prefered way to update mdadm/mdadm.conf
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Proposal: make RAID6 code optional
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Proposal: make RAID6 code optional
  • From: Prakash Punnoor <prakash@xxxxxxxxxx>
• Re: prefered way to update mdadm/mdadm.conf
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID 10 array won't assemble, all devices marked spare, confusing mdadm metadata
  • From: Neil Brown <neilb@xxxxxxx>
• Re: prefered way to update mdadm/mdadm.conf
  • From: Federico <undicizeri@xxxxxxxxx>
• prefered way to update mdadm/mdadm.conf
  • From: "Timothy D. Lenz" <tlenz@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• RAID 10 array won't assemble, all devices marked spare, confusing mdadm metadata
  • From: Dave Fisher <davef@xxxxxxxxxxxxxxxx>
• Re: [dm-devel] [PATCHES] new barriers - 2
  • From: Ric Wheeler <rwheeler@xxxxxxxxxx>
• Re: Strange md(_resync?) related paging errors on 2.6.29
  • From: "NeilBrown" <neilb@xxxxxxx>
• Re: Strange md(_resync?) related paging errors on 2.6.29
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Re: Strange md(_resync?) related paging errors on 2.6.29
  • From: "NeilBrown" <neilb@xxxxxxx>
• Re: Converting system to raid
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Strange md(_resync?) related paging errors on 2.6.29
  • From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Gabor Gombas <gombasg@xxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Neil Brown <neilb@xxxxxxx>
• [md PATCH 4/4] md: update sync_completed and reshape_position even more often.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 3/4] md: improve usefulness and accuracy of sysfs file md/sync_completed.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 2/4] md: allow setting newly added device to 'in_sync' via sysfs.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 1/4] md: tiny md.h cleanups
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 0/4] A few more MD patches for 2.6.30
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Converting system to raid
  • From: "Timothy D. Lenz" <tlenz@xxxxxxxxxx>
• Re: [mdadm git pull] Intel metadata updates and some general fixes
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 1/6] Handle possible bio_alloc failure in md
  • From: Nikanth Karthikesan <knikanth@xxxxxxx>
• Re: Converting system to raid
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Using linux software raid (mdadm) in a shared-disk cluster.
  • From: John Hughes <john@xxxxxxxxx>
• Re: [mdadm git pull] Intel metadata updates and some general fixes
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [Patch] mdadm: move mdadm.map file into /dev/md
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Converting system to raid
  • From: "Timothy D. Lenz" <tlenz@xxxxxxxxxx>
• Re: Converting system to raid
  • From: Jeff Garzik <jeff@xxxxxxxxxx>
• Re: Converting system to raid
  • From: jim owens <jowens@xxxxxx>
• Re: Converting system to raid
  • From: Jeff Garzik <jeff@xxxxxxxxxx>
• Re: Converting system to raid
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• [mdadm git pull] Intel metadata updates and some general fixes
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: Converting system to raid
  • From: "Timothy D. Lenz" <tlenz@xxxxxxxxxx>
• Re: Converting system to raid
  • From: "Timothy D. Lenz" <tlenz@xxxxxxxxxx>
• Re: Converting system to raid
  • From: jim owens <jowens@xxxxxx>
• Re: Converting system to raid
  • From: Jeff Garzik <jeff@xxxxxxxxxx>
• Re: Converting system to raid
  • From: jim owens <jowens@xxxxxx>
• Re: Converting system to raid
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: Converting system to raid
  • From: CoolCold <coolthecold@xxxxxxxxx>
• Re: Any benefity to write intent bitmaps on Raid1
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: RAID halting
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: RAID-6 horizontal grow
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: RAID-6 horizontal grow
  • From: "NeilBrown" <neilb@xxxxxxx>
• Re: Converting system to raid
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Any benefity to write intent bitmaps on Raid1
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: RAID-6 horizontal grow
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: Converting system to raid
  • From: Jan Ceuleers <jan.ceuleers@xxxxxxxxxxxx>
• Re: Any benefity to write intent bitmaps on Raid1
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Converting system to raid
  • From: "Timothy D. Lenz" <tlenz@xxxxxxxxxx>
• Re: Converting system to raid
  • From: Jon Lewis <jlewis@xxxxxxxxx>
• Re: Any benefity to write intent bitmaps on Raid1
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Mirroring Entire Drives Partition Type Clarification
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: RAID-6 horizontal grow
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: RAID-6 horizontal grow
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• RAID-6 horizontal grow
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: Converting system to raid
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: Converting system to raid
  • From: "Timothy D. Lenz" <tlenz@xxxxxxxxxx>
• Mirroring Entire Drives Partition Type Clarification
  • From: Jared Raddigan <jraddigan@xxxxxxx>
• Re: Converting system to raid
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: Converting system to raid
  • From: "Timothy D. Lenz" <tlenz@xxxxxxxxxx>
• Re: Converting system to raid
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: Converting system to raid
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: Converting system to raid
  • From: "Timothy D. Lenz" <tlenz@xxxxxxxxxx>
• Re: Converting system to raid
  • From: "Timothy D. Lenz" <tlenz@xxxxxxxxxx>
• Re: RAID halting
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Recreate raid 10 array
  • From: LCID Fire <lcid-fire@xxxxxxx>
• Re: Converting system to raid
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: RAID halting
  • From: jim owens <jowens@xxxxxx>
• RAID 10 Disk remove failing.
  • From: Benjamin ESTRABAUD <be@xxxxxxxxxx>
• Re: Recreate raid 10 array
  • From: LCID Fire <lcid-fire@xxxxxxx>
• Re: Converting system to raid
  • From: CoolCold <coolthecold@xxxxxxxxx>
• Re: mdadm udev rules change
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Thoughts on using SSD
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Any benefity to write intent bitmaps on Raid1
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Converting system to raid
  • From: KwangErn Liew <admin@xxxxxxxxx>
• Re: Any benefity to write intent bitmaps on Raid1
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID halting
  • From: David Greaves <david@xxxxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: Recreate raid 10 array
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Converting system to raid
  • From: "Timothy D. Lenz" <tlenz@xxxxxxxxxx>
• Re: Any benefity to write intent bitmaps on Raid1
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Recreate raid 10 array
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Thoughts on using SSD
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: [Patch] mdadm: move mdadm.map file into /dev/md
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• Re: [Patch] mdadm: move mdadm.map file into /dev/md
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• Re: mdadm udev rules change
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• Re: Recreate raid 10 array
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• RE: RAID halting
  • From: "David Lethe" <david@xxxxxxxxxxxx>
• Re: Any benefity to write intent bitmaps on Raid1
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Any benefity to write intent bitmaps on Raid1
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 in strange state
  • From: Neil Brown <neilb@xxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: Any benefity to write intent bitmaps on Raid1
  • From: Bryan Mesich <bryan.mesich@xxxxxxxx>
• Any benefity to write intent bitmaps on Raid1
  • From: "Steven Ellis" <steven@xxxxxxxxxxxxxxx>
• Re: Can't resolve mismatch_count > 0 for a raid 1 array
  • From: "Steven Ellis" <steven@xxxxxxxxxxxxxxx>
• Re: Can't resolve mismatch_count > 0 for a raid 1 array
  • From: "Steven Ellis" <steven@xxxxxxxxxxxxxxx>
• Re: RAID5 in strange state
  • From: David Rees <drees76@xxxxxxxxx>
• Re: RAID5 in strange state
  • From: Frank Baumgart <frank.baumgart@xxxxxxx>
• Re: Recreate raid 10 array
  • From: LCID Fire <lcid-fire@xxxxxxx>
• Re: Recreate raid 10 array
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Can't resolve mismatch_count > 0 for a raid 1 array
  • From: Iustin Pop <iusty@xxxxxxxxx>
• Re: RAID5 in strange state
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Recreate raid 10 array
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: Can't resolve mismatch_count > 0 for a raid 1 array
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Can't resolve mismatch_count > 0 for a raid 1 array
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Recreate raid 10 array
  • From: Bill Davidsen <davidsen@xxxxxxx>
• RAID5 in strange state
  • From: Frank Baumgart <frank.baumgart@xxxxxxx>
• Re: RAID halting
  • From: Corey Hickey <bugfood-ml@xxxxxxxxxx>
• Re: RAID halting
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: RAID halting
  • From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
• RE: RAID halting
  • From: "David Lethe" <david@xxxxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Can't resolve mismatch_count > 0 for a raid 1 array
  • From: Steven Ellis <steven@xxxxxxxxxxxxxxx>
• Re: RAID halting
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: mdadm udev rules change
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [Patch] mdadm: fix compile warnings on ppc64
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH] md: tiny md.h cleanups
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [Patch] mdadm: move mdadm.map file into /dev/md
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [Patch] mdadm: move mdadm.map file into /dev/md
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [Patch] mdadm: move mdadm.map file into /dev/md
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: [Patch] mdadm: move mdadm.map file into /dev/md
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• Re: [Patch] mdadm: move mdadm.map file into /dev/md
  • From: "NeilBrown" <neilb@xxxxxxx>
• Re: [Patch] mdadm: move mdadm.map file into /dev/md
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: "David Lethe" <david@xxxxxxxxxxxx>
• Re: RAID halting
  • From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• [PATCH] md: tiny md.h cleanups
  • From: Christoph Hellwig <hch@xxxxxx>
• Followup: how to restore a raid5 with 1 disk destroyed and 1 kicked out?
  • From: "Jörg Habenicht" <j.habenicht@xxxxxx>
• how to restore a raid5 with 1 disk destroyed and 1 kicked out?
  • From: "Jörg Habenicht" <j.habenicht@xxxxxx>
• Re: [Patch] mdadm: move mdadm.map file into /dev/md
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• Re: [Patch] mdadm: move mdadm.map file into /dev/md
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Recreate raid 10 array
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: [Patch] mdadm: move mdadm.map file into /dev/md
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: RAID halting
  • From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
• Re: RAID halting
  • From: jim owens <jowens@xxxxxx>
• Recreate raid 10 array
  • From: LCID Fire <lcid-fire@xxxxxxx>
• Re: [Patch] mdadm: move mdadm.map file into /dev/md
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: harmful parallel AoE check/resync
  • From: Chris Webb <chris@xxxxxxxxxxxx>
• [Patch] mdadm: fix compile warnings on ppc64
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• mdadm udev rules change
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• [Patch] mdadm: move mdadm.map file into /dev/md
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• Re: [Patch] mdadm ignoring homehost?
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• harmful parallel AoE check/resync
  • From: Ferenc Wagner <wferi@xxxxxxx>
• Re: RAID halting
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• PULL-REQUEST bug fix for md/raid1
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Kernel bug?
  • From: Neil Brown <neilb@xxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: RAID halting
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: pg_mh@xxxxxxxxxx (Peter Grandi)
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: progress, but... - re. fixing LVM/md snafu
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: rebuilding raided root partition
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
• Re: RAID halting
  • From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: RAID halting
  • From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
• Re: RAID halting
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: RAID halting
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• progress, but... - re. fixing LVM/md snafu
  • From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxxxxxxxxxx>
• RE: RAID halting
  • From: "David Lethe" <david@xxxxxxxxxxxx>
• FW: RAID halting
  • From: "David Lethe" <david@xxxxxxxxxxxx>
• Re: RAID halting
  • From: Drew <drew.kay@xxxxxxxxx>
• Re: rebuilding raided root partition
  • From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re:
  • From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
• RE: RAID halting
  • From: "Lelsie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Lelsie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: RAID halting
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• RE:
  • From: "Lelsie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: RAID halting
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: rebuilding raided root partition
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• RE: RAID halting
  • From: "Lelsie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE:
  • From: "David Lethe" <david@xxxxxxxxxxxx>
• RE: RAID halting
  • From: "Lelsie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE:
  • From: "Lelsie Rhorer" <lrhorer@xxxxxxxxxxx>
• rebuilding raided root partition
  • From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: RAID halting
  • From: Roger Heflin <rogerheflin@xxxxxxxxx>
• Re: RAID halting
  • From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
• Re:
  • From: Roger Heflin <rogerheflin@xxxxxxxxx>
• Re:
  • From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
• RE:
  • From: "Lelsie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Lelsie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: Kernel bug?
  • From: "NeilBrown" <neilb@xxxxxxx>
• RE: RAID halting
  • From: "Lelsie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Lelsie Rhorer" <lrhorer@xxxxxxxxxxx>
• Kernel bug?
  • From: Gabriele Tozzi <gabriele@xxxxxxxx>
• RE: RAID halting
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Lelsie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: RAID halting
  • From: Roger Heflin <rogerheflin@xxxxxxxxx>
• RE: RAID halting
  • From: "Lelsie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Lelsie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: raid6 slow
  • From: "Lelsie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID halting
  • From: "Lelsie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: Thoughts on using SSD
  • From: Lars Marowsky-Bree <lmb@xxxxxxx>
• Re: RAID5 volumes suddenly lost superblock and show weird hexdump patterns
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Adding more drives/saturating the bandwidth
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: Adding more drives/saturating the bandwidth
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• RE: RAID halting
  • From: "Lelsie Rhorer" <lrhorer@xxxxxxxxxxx>
• Troubleshooting raid1 data corruption and mismatch_cnt
  • From: "Steven Ellis" <steven@xxxxxxxxxxxxxxx>
• PULL REQUEST: md patches for 2.6.30 merge window
  • From: Neil Brown <neilb@xxxxxxx>
• Re:
  • From: pg_lxra@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
• RAID5 volumes suddenly lost superblock and show weird hexdump patterns
  • From: estr4ng3d <e5tr4ng3d@xxxxxxxxx>
• Re:
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: chunk size
  • From: "NeilBrown" <neilb@xxxxxxx>
• chunk size
  • From: CoolCold <coolthecold@xxxxxxxxx>
• Re: your mail
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Strange filesystem slowness with 8TB RAID6
  • From: "NeilBrown" <neilb@xxxxxxx>
• RE:
  • From: "David Lethe" <david@xxxxxxxxxxxx>
• [no subject]
  • From: "Lelsie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: mdadm ignoring homehost?
  • From: Michal Soltys <soltys@xxxxxxxx>
• Re: mdadm ignoring homehost?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Why do I need 4 disks for a raid6?
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Why do I need 4 disks for a raid6?
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Adding more drives/saturating the bandwidth
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: Why do I need 4 disks for a raid6?
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Adding more drives/saturating the bandwidth
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Why do I need 4 disks for a raid6?
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: Adding more drives/saturating the bandwidth
  • From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
• Re: Why do I need 4 disks for a raid6?
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Why do I need 4 disks for a raid6?
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Adding more drives/saturating the bandwidth
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• RE: Adding more drives/saturating the bandwidth
  • From: "David Lethe" <david@xxxxxxxxxxxx>
• Re: mdadm ignoring homehost?
  • From: Jon Nelson <jnelson-linux-raid@xxxxxxxxxxx>
• Re: Adding more drives/saturating the bandwidth
  • From: Andrew Burgess <aab@xxxxxxxxxxx>
• Re: Adding more drives/saturating the bandwidth
  • From: Jon Hardcastle <jd_hardcastle@xxxxxxxxx>
• Re: Adding more drives/saturating the bandwidth
  • From: Jon Hardcastle <jd_hardcastle@xxxxxxxxx>
• Re: Adding more drives/saturating the bandwidth
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Adding more drives/saturating the bandwidth
  • From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
• Re: Adding more drives/saturating the bandwidth
  • From: Jon Hardcastle <jd_hardcastle@xxxxxxxxx>
• [md PATCH 14/14] md/raid5 revise rules for when to update metadata during reshape
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 13/14] md/raid5: minor code cleanups in make_request.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 12/14] md: remove CONFIG_MD_RAID_RESHAPE config option.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 11/14] md/raid5: be more careful about write ordering when reshaping.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 10/14] md: don't display meaningless values in sysfs files resync_start and sync_speed
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 09/14] md/raid5: allow layout and chunksize to be changed on active array.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 08/14] md/raid5: reshape using largest of old and new chunk size
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 07/14] md/raid5: prepare for allowing reshape to change layout
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 06/14] md/raid5: prepare for allowing reshape to change chunksize.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 05/14] md/raid5: clearly differentiate 'before' and 'after' stripes during reshape.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 04/14] Documentation/md.txt update
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 03/14] md: allow number of drives in raid5 to be reduced
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 02/14] md/raid5: change reshape-progress measurement to cope with reshaping backwards.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 01/14] md: add explicit method to signal the end of a reshape.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 00/14] Final set of patches head for 2.6.30
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Adding more drives/saturating the bandwidth
  • From: Nagilum <nagilum@xxxxxxxxxxx>
• Re: Adding more drives/saturating the bandwidth
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• RE: [PATCH 09/13] iop-adma: P+Q self test
  • From: "Sosnowski, Maciej" <maciej.sosnowski@xxxxxxxxx>
• RE: [PATCH 07/13] async_tx: add support for asynchronous RAID6 recovery operations
  • From: "Sosnowski, Maciej" <maciej.sosnowski@xxxxxxxxx>
• RE: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: "Sosnowski, Maciej" <maciej.sosnowski@xxxxxxxxx>
• Re: [md PATCH 4/6] md/raid5: change reshape-progress measurement to cope with reshaping backwards.
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: [md PATCH 4/6] md/raid5: change reshape-progress measurement to cope with reshaping backwards.
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• raid5 degraded twice, what happened here?
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: 2.6.29 - raid10 issue - spares do not get synched automatically
  • From: "NeilBrown" <neilb@xxxxxxx>
• Re: 2.6.29 - raid10 issue - spares do not get synched automatically
  • From: Patrick Ringl <patrick.ringl@xxxxxx>
• Re: 2.6.29 - raid10 issue - spares do not get synched automatically
  • From: Patrick Ringl <patrick.ringl@xxxxxx>
• Re: RAID5 -> RAID6
  • From: Max Waterman <davidmaxwaterman@xxxxxxxxxxxxxx>
• Re: 2.6.29 - raid10 issue - spares do not get synched automatically
  • From: "NeilBrown" <neilb@xxxxxxx>
• Re: RAID5 -> RAID6
  • From: "NeilBrown" <neilb@xxxxxxx>
• RAID5 -> RAID6
  • From: Max Waterman <davidmaxwaterman@xxxxxxxxxxxxxx>
• 2.6.29 - raid10 issue - spares do not get synched automatically
  • From: Patrick Ringl <patrick.ringl@xxxxxx>
• Re: [md PATCH 4/6] md/raid5: change reshape-progress measurement to cope with reshaping backwards.
  • From: "NeilBrown" <neilb@xxxxxxx>
• Re: [md PATCH 6/6] Documentation/md.txt update
  • From: "NeilBrown" <neilb@xxxxxxx>
• Re: [md PATCH 5/6] md: allow number of drives in raid5 to be reduced
  • From: "NeilBrown" <neilb@xxxxxxx>
• Re: RAID5 reshape problems : SOLVED
  • From: "Stefan G. Weichinger" <lists@xxxxxxxx>
• Re: [md PATCH 6/6] Documentation/md.txt update
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: [md PATCH 5/6] md: allow number of drives in raid5 to be reduced
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: [md PATCH 4/6] md/raid5: change reshape-progress measurement to cope with reshaping backwards.
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: RAID1 write-behind not working?
  • From: David Rees <drees76@xxxxxxxxx>
• Re: Re-size RAID-10
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid0 zones
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Thoughts on using SSD
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Thoughts on using SSD
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID1 write-behind not working?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID1 write-behind not working?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Thoughts on using SSD
  • From: David Rees <drees76@xxxxxxxxx>
• Thoughts on using SSD
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Best way to re-format RAID1 disks
  • From: "David Lethe" <david@xxxxxxxxxxxx>
• Re: Best way to re-format RAID1 disks
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: RAID1 write-behind not working?
  • From: David Rees <drees76@xxxxxxxxx>
• raid0 zones
  • From: Raz <raziebe@xxxxxxxxx>
• Re: Best way to re-format RAID1 disks
  • From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
• Adding more drives/saturating the bandwidth
  • From: Jon Hardcastle <jd_hardcastle@xxxxxxxxx>
• Best way to re-format RAID1 disks
  • From: Federico <undicizeri@xxxxxxxxx>
• Re: [PATCH 02/13] async_tx: don't use src_list argument of async_xor() for dma addresses
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: RAID5 reshape problems
  • From: "Stefan G. Weichinger" <lists@xxxxxxxx>
• Re: Re-size RAID-10
  • From: Raz <raziebe@xxxxxxxxx>
• Re: Re-size RAID-10
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: Re-size RAID-10
  • From: Raz <raziebe@xxxxxxxxx>
• Re: RAID5 reshape problems
  • From: "Stefan G. Weichinger" <lists@xxxxxxxx>
• RAID1 write-behind not working?
  • From: David Rees <drees76@xxxxxxxxx>
• Re: RAID5 reshape problems
  • From: "Stefan G. Weichinger" <lists@xxxxxxxx>
• Re: Re-size RAID-10
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 reshape problems
  • From: Neil Brown <neilb@xxxxxxx>
• Re-size RAID-10
  • From: "Daniel L. Miller" <dmiller@xxxxxxxxx>
• Re: RAID5 reshape problems
  • From: "Stefan G. Weichinger" <lists@xxxxxxxx>
• RAID5 reshape problems
  • From: "Stefan G. Weichinger" <lists@xxxxxxxx>
• Re: [PATCH 02/13] async_tx: don't use src_list argument of async_xor() for dma addresses
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: Question on RAID 10 setup
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Question on RAID 10 setup
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Question on RAID 10 setup
  • From: Keld Jørn Simonsen <keld@xxxxxxxx>
• Re: Question on RAID 10 setup
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Question on RAID 10 setup
  • From: Dylan Distasio <interzone@xxxxxxxxx>
• Re: How to configure 36 disks ?
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Why do I need 4 disks for a raid6?
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• mdadm ignoring homehost?
  • From: Jon Nelson <jnelson-linux-raid@xxxxxxxxxxx>
• raid0 reshape
  • From: Raz <raziebe@xxxxxxxxx>
• [md PATCH 6/6] Documentation/md.txt update
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 5/6] md: allow number of drives in raid5 to be reduced
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 4/6] md/raid5: change reshape-progress measurement to cope with reshaping backwards.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 3/6] md: add explicit method to signal the end of a reshape.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 2/6] md/raid5: enhance raid5_size to work correctly with negative delta_disks
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 1/6] md/raid5: drop qd_idx from r6_state
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 0/6] Reduce the number of devices in RAID4/5/6
  • From: NeilBrown <neilb@xxxxxxx>
• Questions about 1.X RAID metadata
  • From: Khelben Blackstaff <eye.of.the.8eholder@xxxxxxxxx>
• Re: raid 1 single drive failure. rebuilt with replacement drive. missing 20G of data
  • From: Nifty Fedora Mitch <niftyfedora@xxxxxxxxxxxx>
• Re: Why do I need 4 disks for a raid6?
  • From: Nifty Fedora Mitch <niftyfedora@xxxxxxxxxxxx>
• Re: How to configure 36 disks ?
  • From: Mikael Abrahamsson <swmike@xxxxxxxxx>
• Re: How to configure 36 disks ?
  • From: Richard Scobie <richard@xxxxxxxxxxx>
• Re: How to configure 36 disks ?
  • From: Raz <raziebe@xxxxxxxxx>
• Re: How to configure 36 disks ?
  • From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
• Re: How to configure 36 disks ?
  • From: Raz <raziebe@xxxxxxxxx>
• Re: How to configure 36 disks ?
  • From: Christopher Smith <x@xxxxxxxx>
• Re: How to configure 36 disks ?
  • From: Raz <raziebe@xxxxxxxxx>
• Re: How to configure 36 disks ?
  • From: Mark Lord <liml@xxxxxx>
• Re: How to configure 36 disks ?
  • From: Jon Hardcastle <jd_hardcastle@xxxxxxxxx>
• Re: How to configure 36 disks ?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: How to configure 36 disks ?
  • From: Emmanuel Florac <eflorac@xxxxxxxxxxxxxx>
• How to configure 36 disks ?
  • From: Raz <raziebe@xxxxxxxxx>
• Re: [PATCH 07/13] async_tx: add support for asynchronous RAID6 recovery operations
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: raid 1 single drive failure. rebuilt with replacement drive. missing 20G of data
  • From: Neil Brown <neilb@xxxxxxx>
• Bad news after raid-5 recovery
  • From: Erik Boettcher <tehfoo@xxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH 01/13] md/raid6: move raid6 data processing to raid6_pq.ko
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: Raid 5 Recovery
  • From: Erik Boettcher <tehfoo@xxxxxxxxx>
• Re: Raid 5 Recovery
  • From: Erik Boettcher <tehfoo@xxxxxxxxx>
• Re: Raid 5 Recovery
  • From: Max Amanshauser <linux-raid@xxxxxxxxxxxxxxxxx>
• Re: Raid 5 Recovery
  • From: Erik Boettcher <tehfoo@xxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: "H. Peter Anvin" <h.peter.anvin@xxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: What hardware for RAID5? (PCIe controller or fast onboard)
  • From: Ryan Wagoner <rswagoner@xxxxxxxxx>
• Re: Why do I need 4 disks for a raid6?
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: [PATCH] relax checks to support 3disk raid6 arrays
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: [PATCH] relax checks to support 3disk raid6 arrays
  • From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
• Re: [PATCH] relax checks to support 3disk raid6 arrays
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/13] Asynchronous raid6 acceleration (part 1 of 2)
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 09/13] iop-adma: P+Q self test
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH 09/13] iop-adma: P+Q self test
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH] md: raid5 run(): Fix max_degraded for raid level 4.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [ md/for-next git pull ] Support setting the array size from userspace
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Why do I need 4 disks for a raid6?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 02/13] async_tx: don't use src_list argument of async_xor() for dma addresses
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: [PATCH 01/13] md/raid6: move raid6 data processing to raid6_pq.ko
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH 00/13] Asynchronous raid6 acceleration (part 1 of 2)
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: "H. Peter Anvin" <h.peter.anvin@xxxxxxxxx>
• Re: [PATCH 00/13] Asynchronous raid6 acceleration (part 1 of 2)
  • From: Andi Kleen <andi@xxxxxxxxxxxxxx>
• Re: What hardware for RAID5? (PCIe controller or fast onboard)
  • From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
• [PATCH 11/13] dmatest: add xor test
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 13/13] dmatest: add pq support
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 12/13] dmatest: add dma interrupts and callbacks
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 10/13] dmaengine: allow dma support for async_tx to be toggled
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 07/13] async_tx: add support for asynchronous RAID6 recovery operations
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 09/13] iop-adma: P+Q self test
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 08/13] iop-adma: P+Q support for iop13xx adma engines
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 06/13] async_tx: add support for asynchronous GF multiplication
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 05/13] async_tx: add sum check flags
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 04/13] async_tx: kill needless module_{init|exit}
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 03/13] async_tx: provide __async_inline for HAS_DMA=n archs
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 02/13] async_tx: don't use src_list argument of async_xor() for dma addresses
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 01/13] md/raid6: move raid6 data processing to raid6_pq.ko
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 00/13] Asynchronous raid6 acceleration (part 1 of 2)
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: What hardware for RAID5? (PCIe controller or fast onboard)
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Why do I need 4 disks for a raid6?
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Why do I need 4 disks for a raid6?
  • From: david.geib@xxxxxxxxxxxxxxxxxxx
• What hardware for RAID5? (PCIe controller or fast onboard)
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: Why do I need 4 disks for a raid6?
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: Why do I need 4 disks for a raid6?
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• [PATCH] md: raid5 run(): Fix max_degraded for raid level 4.
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: Why do I need 4 disks for a raid6?
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: sync_action repair not reading all sectors?
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: Why do I need 4 disks for a raid6?
  • From: Andre Noll <maan@xxxxxxxxxxxxxxx>
• Re: Why do I need 4 disks for a raid6?
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: Why do I need 4 disks for a raid6?
  • From: david.geib@xxxxxxxxxxxxxxxxxxx
• [ md/for-next git pull ] Support setting the array size from userspace
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: sync_action repair not reading all sectors?
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Why do I need 4 disks for a raid6?
  • From: Goswin von Brederlow <goswin-v-b@xxxxxx>
• Re: sync_action repair not reading all sectors?
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: sync_action repair not reading all sectors?
  • From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
• RE: sync_action repair not reading all sectors?
  • From: "David Lethe" <david@xxxxxxxxxxxx>
• sync_action repair not reading all sectors?
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: Best Practices for a Virtualized Tira Misu md Setup
  • From: pg_mh@xxxxxxxxxx (Peter Grandi)
• Best Practices for a Virtualized Tira Misu md Setup
  • From: Christopher Chen <muffaleta@xxxxxxxxx>
• Re: rescue an alien md raid5
  • From: Harry Mangalam <harry.mangalam@xxxxxxx>
• Re: [PATCH] md: Track raid5/6 statistics
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: rescue an alien md raid5
  • From: Ryan Wagoner <rswagoner@xxxxxxxxx>
• Re: High IO Wait with RAID 1
  • From: David Rees <drees76@xxxxxxxxx>
• Re: High IO Wait with RAID 1
  • From: "David Lethe" <david@xxxxxxxxxxxx>
• Re: High IO Wait with RAID 1
  • From: David Rees <drees76@xxxxxxxxx>
• Re: High IO Wait with RAID 1
  • From: David Rees <drees76@xxxxxxxxx>
• Re: High IO Wait with RAID 1
  • From: Ryan Wagoner <rswagoner@xxxxxxxxx>
• Re: High IO Wait with RAID 1
  • From: Ryan Wagoner <rswagoner@xxxxxxxxx>
• Re: Reliability of bitmapped resync
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Raid6 write performance
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Disk characteristics for virtual machines
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: High IO Wait with RAID 1
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Question on Raid 5 array initial creation times
  • From: Bryce <bryce@xxxxxxxxxxxxxxxxxx>
• Re: High IO Wait with RAID 1
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Fwd: High IO Wait with RAID 1
  • From: Ryan Wagoner <rswagoner@xxxxxxxxx>