Re: Can't resolve mismatch_count > 0 for a raid 1 array

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Steven Ellis <steven@xxxxxxxxxxxxxxx> writes:

> I've resolved most of my raid issues by re-housing the affected system
> and replacing the motherboard, but across the 3 boards I've tried I
> always have an issue with my /dev/md1 array producing mismatch_count
> of 128 or 256.
>
> System is running Centos 5.2 with a Xen Dom0 kernel
>
> This md1 volume is a pair of 40GB HDs raid1 on an IDE controller which
> I them have a bunch of LVM's that are my Xen guests.
>
> Is there any chance that these mismatch_count values are due to swap
> partitions for the Xen guests?
>
> Steve

Have you repaired the raid or do you just check and check and check?

MfG
        Goswin
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux