"Leslie Rhorer" <lrhorer@xxxxxxxxxxx> writes:
>> This is one of many things proposed occasionally here, no real
>> objection, sometimes loud support, but no one actually *does* the code.
>
> At the risk of being a metoo, I would really love this feature.
>
>> You have described the problem exactly, and the solution is still to do
>> it manually. But you don't need to fail the drive long term, if you can
>> stop the array for a few moments. You stop the array, remove the suspect
>> drive,
>
> Um, how, exactly? That is to say, after stopping the array, how does one
> remove the drive? From the next step in your suggestion, it doesn't seem
> tome you are talking about physically removing the drive, so how does one
> remove a drive from a stopped array for this purpose? I didn't think that
> either
>
> mdadm -r <drive> <array>
> or
>
> mdadm -f <drive> <array>
>
> could be used on a stopped array. Am I mistaken?
>
>> create a raid1 of the suspect drive marked write-mostly and the
>> new spare,
>
> But doesn't creating the array with the drive wipe the contents? If so, it
> doesn't seem to me this provides much redundancy.
>
>> then add the raid1 in place of the suspect drive.
>
> Before starting the array? If so, how? Or should one do an assemble
> including the newly minted RAID1? I thought mdadm would take the newly
> added drive to be blank, even if it isn't.
>
>> For any
>> chunks present on the new drive the reads will go there, reducing
>
> Huh? Are you saying any read which finds one chunk missing will
> automatically write back the missing data (doing a spot rebuild), or
> something else?
>
>> access, while data is copied from the old to the new in resync, and
>
> See my query above. It seems to me you are saying the RAID1 can be created
> without wiping the drive.
>
>> writes still go to the old suspect drive so if the new drive fails you
>> are no worse off.
>
> I think I would expect the old drive to be more likely to fail than the new.
>
>> When the raid1 is clean you stop the main array and
>> back the suspect drive out.
>
> OK, basically the same question. How does one disassemble the RAID1 array
> without wiping the data on the new drive?
I think he ment this:
mdadm --stop /dev/md0
mdadm --build /dev/md9 --chunk=64k --level=1 --raid-devices=2 /dev/suspect /dev/new
mdadm --assemble /dev/md0 /dev/md9 /dev/other ...
MfG
Goswin
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
