Re: Requesting replace mode for changing a disk

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



"Guy Watkins" <linux-raid@xxxxxxxxxxxxxxxx> writes:

> If the disk is suspect, I would expect read errors!
> If you have 1 bad block on the suspect disk, this process will fail.
> If the logic was built-in to md, then any read errors while replacing could
> be recovered from another disk or disks.

That is actualy a good point. I didn't even think of that.

It would require a true replace mode in all raid levels though and not
just internally starting a raid1.

MfG
        Goswin
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux