John Robinson <john.robinson@xxxxxxxxxxxxxxxx> writes:
> On 22/04/2009 15:21, Andre Noll wrote:
>> On 13:41, John Robinson wrote:
>>>> Normal shutdown should put the raid in read-only mode as last step. At
>>>> least Debian does that. That way even a mounted raid will be clean
>>>> after reboot.
>>> Yes, I would have thought it should as well. But I've just looked
>>> at CentOS 5's /etc/rc.d/halt and as far as I can see it doesn't try
>>> to switch md devices to read-only.
>>
>> There's no need to do that in the shutdown script as the kernel will
>> switch all arrays to read-only mode on halt/reboot.
>>
>> Moreover, as raid arrays are automatically marked clean if no writes
>> are pending for some small time period, a simple "sync; sleep 1"
>> at the end of the shutdown script is usually enough to have a clean
>> array during the next boot.
>
> But that's still only "usually". Considering the enormous efforts
> taken to unmount filesystems (or remount them read-only) so they're
> certain to be clean at the next startup, it seems odd to settle for
> "usually"... and CentOS 5 doesn't even appear to do that.
>
> Goswin, please can you tell me what command Debian uses? I think I
> want to combine both of these into my systems' halt scripts.
>
> Cheers,
>
> John.
On halt I do see a message about the raid being switched to read-only
but I don't see any command that would do that. So I do believe this
is, as Andre says, the kernel switching the raid read-only before
halting.
Maybe your kernel is too old to have this feature?
MfG
Goswin
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
