Linux RAID Storage Date Index

• Thread Index

• RE: [PATCH 2/5] imsm: prepare update for level migrations reshape
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• RE: [PATCH 1/5] FIX: set delta_disks to 0 for raid5->raid0 transition
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• Re: high throughput storage server?
  • From: hansbkk@xxxxxxxxx
• Re: Linux software RAID assistance
  • From: NeilBrown <neilb@xxxxxxx>
• Re: high throughput storage server?
  • From: Matt Garman <matthew.garman@xxxxxxxxx>
• Re: failed to write superblock errors, and more!
  • From: NeilBrown <neilb@xxxxxxx>
• failed to write superblock errors, and more!
  • From: Jon Nelson <jnelson-linux-raid@xxxxxxxxxxx>
• physical size of the device inconsistent with superblock, after RAID problems
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• Re: write-behind has no measurable effect?
  • From: Andras Korn <korn@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: mdadm: recovering from an aborted reshape op - boot messages
  • From: NeilBrown <neilb@xxxxxxx>
• Re: high throughput storage server?
  • From: Doug Dumitru <doug@xxxxxxxxxx>
• Re: mdadm: recovering from an aborted reshape op - boot messages
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• Re: mdadm: recovering from an aborted reshape op - boot messages
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 2/5] imsm: prepare update for level migrations reshape
  • From: NeilBrown <neilb@xxxxxxx>
• Re: write-behind has no measurable effect?
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: mdadm: recovering from an aborted reshape op - boot messages
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• Re: write-behind has no measurable effect?
  • From: Andras Korn <korn@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: RAID10 failure(s)
  • From: NeilBrown <neilb@xxxxxxx>
• Re: RAID10 failure(s)
  • From: Mark Keisler <grimm26@xxxxxxxxx>
• Re: RAID10 failure(s)
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] FIX: set delta_disks to 0 for raid5->raid0 transition
  • From: NeilBrown <neilb@xxxxxxx>
• Re: mdadm: can't removed failed/detached drives when using metadata 1.x
  • From: NeilBrown <neilb@xxxxxxx>
• high throughput storage server?
  • From: Matt Garman <matthew.garman@xxxxxxxxx>
• Re: Single-drive RAID0
  • From: NeilBrown <neilb@xxxxxxx>
• Re: mdadm: recovering from an aborted reshape op - boot messages
  • From: NeilBrown <neilb@xxxxxxx>
• Re: write-behind has no measurable effect?
  • From: NeilBrown <neilb@xxxxxxx>
• Re: RAID10 failure(s)
  • From: NeilBrown <neilb@xxxxxxx>
• Re: RAID10 failure(s)
  • From: Mark Keisler <grimm26@xxxxxxxxx>
• Re: write-behind has no measurable effect?
  • From: Andras Korn <korn@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: write-behind has no measurable effect?
  • From: Andras Korn <korn@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: write-behind has no measurable effect?
  • From: Doug Dumitru <doug@xxxxxxxxxx>
• Re: write-behind has no measurable effect?
  • From: NeilBrown <neilb@xxxxxxx>
• Re: RAID10 failure(s)
  • From: NeilBrown <neilb@xxxxxxx>
• mdadm: recovering from an aborted reshape op - boot messages
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• Re: [PATCH] fix: detect container early in Create
  • From: NeilBrown <neilb@xxxxxxx>
• Re: RAID10 failure(s)
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• write-behind has no measurable effect?
  • From: Andras Korn <korn@xxxxxxxxxxxxxxxxxxxxxxx>
• mdadm: recovering from an aborted reshape op - mdadm -Evv /dev/sd[abcde]2
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• mdadm: recovering from an aborted reshape op – mdadm -D /dev/md1
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• mdadm: recovering from an aborted reshape op - mdadm -Avv /dev/md1 /dev/sd[adbce]2
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• Re: RAID10 failure(s)
  • From: Mark Keisler <grimm26@xxxxxxxxx>
• RE: Single-drive RAID0
  • From: "Wojcik, Krzysztof" <krzysztof.wojcik@xxxxxxxxx>
• Re: mdXX: bitmap superblock UUID mismatch
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: mdXX: bitmap superblock UUID mismatch
  • From: Reynald Borer <reynald.borer@xxxxxxxxx>
• RAID10 failure(s)
  • From: Mark Keisler <grimm26@xxxxxxxxx>
• raid10 failure(s)
  • From: Mark Keisler <mark@xxxxxxxxxxx>
• RE: [PATCH] fix: detect container early in Create
  • From: "Labun, Marcin" <Marcin.Labun@xxxxxxxxx>
• [PATCH 5/5] imsm: Add chunk size to metadata update
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 4/5] imsm: process update for raid level migrations
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 3/5] imsm: prepare memory for level migration update
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 2/5] imsm: prepare update for level migrations reshape
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 1/5] FIX: set delta_disks to 0 for raid5->raid0 transition
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 0/5] Level and chunk size migrations for imsm
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: mdadm: can't removed failed/detached drives when using metadata 1.x
  • From: Rémi Rérolle <rrerolle@xxxxxxxxx>
• [PATCH] dmaengine: add slave-dma maintainer
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• RE: [PATCH] fix: detect container early in Create
  • From: "Czarnowska, Anna" <anna.czarnowska@xxxxxxxxx>
• Re: mdadm: recovering from an aborted reshape op - to ensure at least one email gets through!
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• Re: mdadm: can't removed failed/detached drives when using metadata 1.x
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Single-drive RAID0
  • From: NeilBrown <neilb@xxxxxxx>
• Re: mdadm: recovering from an aborted reshape op - to ensure at least one email gets through!
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 0/4] Raid0 <-> Raid5 migrations (imsm)
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 0/4] Prepare mdadm for migrations (external meta)
  • From: NeilBrown <neilb@xxxxxxx>
• Re: mdadm: recovering from an aborted reshape op - to ensure at least one email gets through!
  • From: NeilBrown <neilb@xxxxxxx>
• mdadm: recovering from an aborted reshape op: selected log entries
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• mdadm: recovering from an aborted reshape op: mdstat
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• mdadm: recovering from an aborted reshape op: mdadm -E -v -s
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• mdadm: recovering from an aborted reshape op: mdadm -detail
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• mdadm: recovering from an aborted reshape op: mdadm -A -v --scan
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• mdadm: recovering from an aborted reshape op - to ensure at least one email gets through!
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• Re: [PATCH] md: Detect raid1->raid0 takeover when comparing raid_disks
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] fix: detect container early in Create
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 1/2] fix: imsm: size must be in K for rounding to chunk
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 1/4] imsm: FIX: add raid5 to raid0 case to analyse_change()
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] md: Remove risk of overflow via sprintf) by using snprintf() in md_check_recovery()
  • From: Bodo Eggert <arcoristkaputtundbrauchtdiesentext.7eggert@xxxxxxxxxxxxxx>
• Re: [PATCH] md: Remove risk of overflow via sprintf) by using snprintf() in md_check_recovery()
  • From: Jesper Juhl <jj@xxxxxxxxxxxxx>
• Re: Q re sync_completed
  • From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
• Re: Q re sync_completed
  • From: NeilBrown <neilb@xxxxxxx>
• Q re sync_completed
  • From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
• Re: Raid 5 rebuild with only 2 spare devices
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: Raid 5 rebuild with only 2 spare devices
  • From: Thomas Heilberg <theilberg42@xxxxxxxxx>
• Re: [PATCH] md: Remove risk of overflow via sprintf) by using snprintf() in md_check_recovery()
  • From: "Daniel K." <dk@xxxxx>
• Re: [PATCH] md: Remove risk of overflow via sprintf) by using snprintf() in md_check_recovery()
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: [PATCH] md: Remove risk of overflow via sprintf) by using snprintf() in md_check_recovery()
  • From: "Daniel K." <dk@xxxxx>
• Re: RAID6 array won't start
  • From: Christian <cjs703@xxxxxxxxx>
• Re: RAID6 array won't start
  • From: NeilBrown <neilb@xxxxxxx>
• Re: RAID6 array won't start
  • From: Christian <cjs703@xxxxxxxxx>
• Re: RAID6 array won't start
  • From: NeilBrown <neilb@xxxxxxx>
• Re: md raid5 blocked in get_active_stripe after disk failure
  • From: David Flynn <davidf@xxxxxxxxxxxx>
• Re: RAID6 array won't start
  • From: Christian <cjs703@xxxxxxxxx>
• Re: RAID6 array won't start
  • From: Christian <cjs703@xxxxxxxxx>
• Re: RAID6 array won't start
  • From: Christian <cjs703@xxxxxxxxx>
• Re: RAID6 array won't start
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH] md: Remove risk of overflow via sprintf) by using snprintf() in md_check_recovery()
  • From: Jesper Juhl <jj@xxxxxxxxxxxxx>
• Re: RAID6 array won't start
  • From: Christian <cjs703@xxxxxxxxx>
• Re: RAID6 array won't start
  • From: NeilBrown <neilb@xxxxxxx>
• RAID6 array won't start
  • From: Christian <cjs703@xxxxxxxxx>
• Re: raid related kernel hang in 2.6.36
  • From: Iordan Iordanov <iordan@xxxxxxxxxxxxxxx>
• [PATCH 4/4] FIX: Target disk number depends on source raid level
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 1/4] imsm: prepare update for level migrations reshape
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 3/4] imsm: process update for raid level migrations
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 2/4] imsm: prepare memory for level migration update
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 0/4] Raid0 <-> Raid5 migrations (imsm)
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: Raid 5 rebuild with only 2 spare devices
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: Raid 5 rebuild with only 2 spare devices
  • From: Thomas Heilberg <theilberg42@xxxxxxxxx>
• Re: Raid 5 rebuild with only 2 spare devices
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: Linux software RAID assistance
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Raid 5 rebuild with only 2 spare devices
  • From: Thomas Heilberg <theilberg42@xxxxxxxxx>
• Re: raid related kernel hang in 2.6.36
  • From: Iordan Iordanov <iordan@xxxxxxxxxxxxxxx>
• Linux software RAID assistance
  • From: Simon McNair <simonmcnair@xxxxxxxxx>
• mdadm: can't removed failed/detached drives when using metadata 1.x
  • From: Rémi Rérolle <rrerolle@xxxxxxxxx>
• [PATCH 4/4] FIX: Add raid5 to raid0 case to analyse_change()
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 2/4] FIX: Get spares from external metadata
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 3/4] imsm: FIX: Add spare disks information to array description
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 1/4] FIX: delta_disk can have UnSet value
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 0/4] Prepare mdadm for migrations (external meta)
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH] md: Detect raid1->raid0 takeover when comparing raid_disks
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH] fix: detect container early in Create
  • From: "Czarnowska, Anna" <anna.czarnowska@xxxxxxxxx>
• Re: raid1 with rotating offsite disks for backup
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• [PATCH 2/2] fix: imsm: assemble doesn't restart recovery
  • From: "Czarnowska, Anna" <anna.czarnowska@xxxxxxxxx>
• [PATCH 1/2] fix: imsm: size must be in K for rounding to chunk
  • From: "Czarnowska, Anna" <anna.czarnowska@xxxxxxxxx>
• RE: Temporarily Disable Array
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: raid1 with rotating offsite disks for backup
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: raid1 with rotating offsite disks for backup
  • From: hansbkk@xxxxxxxxx
• Re: SSD - TRIM command
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: SSD - TRIM command
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: SSD - TRIM command
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: SSD - TRIM command
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: SSD - TRIM command
  • From: Doug Dumitru <doug@xxxxxxxxxx>
• Re: SSD - TRIM command
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: Temporarily Disable Array
  • From: hansbkk@xxxxxxxxx
• Re: SSD - TRIM command
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: [PATCH] Re: User space RAID-6 access
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: SSD - TRIM command
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: SSD - TRIM command
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: SSD - TRIM command
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: SSD - TRIM command
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: SSD - TRIM command
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: SSD - TRIM command
  • From: "Eric D. Mudama" <edmudama@xxxxxxxxxxxxxxxx>
• Re: SSD - TRIM command
  • From: "Scott E. Armitage" <launchpad@xxxxxxxxxxxxxxxxxxx>
• Re: SSD - TRIM command
  • From: "Eric D. Mudama" <edmudama@xxxxxxxxxxxxxxxx>
• [PATCH] imsm: Test for raid1 -> raid0 takeover added
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• Re: SSD - TRIM command
  • From: Chris Worley <worleys@xxxxxxxxx>
• Re: SSD - TRIM command
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: SSD - TRIM command
  • From: Chris Worley <worleys@xxxxxxxxx>
• Re: SSD - TRIM command
  • From: "Scott E. Armitage" <launchpad@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/4] imsm: Add information about failed disk to '-E' option
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 3/4] FIX: array after migration should be unfrozen
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 2/4] imsm: Use single migration type for all migrations
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 1/4] imsm: FIX: add raid5 to raid0 case to analyse_change()
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: SSD - TRIM command
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• RE: Single-drive RAID0
  • From: "Wojcik, Krzysztof" <krzysztof.wojcik@xxxxxxxxx>
• Re: [systemd-devel] systemd kills mdmon if it was started manually by user
  • From: Lennart Poettering <lennart@xxxxxxxxxxxxxx>
• Re: SSD - TRIM command
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: [PATCH] UT FIX: Pass all UT in suit 13
  • From: NeilBrown <neilb@xxxxxxx>
• Re: SSD - TRIM command
  • From: "Eric D. Mudama" <edmudama@xxxxxxxxxxxxxxxx>
• [PATCH] UT FIX: Pass all UT in suit 13
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: SSD - TRIM command
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• RE: [PATCH 0/6] Reshape fixes (expansion)
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• Re: [PATCH 0/6] Reshape fixes (expansion)
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Single-drive RAID0
  • From: NeilBrown <neilb@xxxxxxx>
• Re: SSD - TRIM command
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: SSD - TRIM command
  • From: maurice <mhilarius@xxxxxxxxx>
• Re: SSD - TRIM command
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: SSD - TRIM command
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: SSD - TRIM command
  • From: maurice <mhilarius@xxxxxxxxx>
• Re: [systemd-devel] systemd kills mdmon if it was started manually by user
  • From: Lennart Poettering <lennart@xxxxxxxxxxxxxx>
• Single-drive RAID0
  • From: "Wojcik, Krzysztof" <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 6/6] FIX: md runs recovery instead reshape for growing single disk raid0 array
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 5/6] FIX: Container can be left frozen
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 4/6] FIX: compare blocks on all data disks
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 3/6] FIX: Compare the same units
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 2/6] UT FIX: imsm container can have different blocks number
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 1/6] imsm: FIX: Wrong output string format
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 0/6] Reshape fixes (expansion)
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: [systemd-devel] systemd kills mdmon if it was started manually by user
  • From: Andrey Borzenkov <arvidjaar@xxxxxxx>
• Re: [systemd-devel] systemd kills mdmon if it was started manually by user
  • From: Lennart Poettering <lennart@xxxxxxxxxxxxxx>
• Re: [systemd-devel] systemd kills mdmon if it was started manually by user
  • From: Andrey Borzenkov <arvidjaar@xxxxxxx>
• Re: [systemd-devel] systemd kills mdmon if it was started manually by user
  • From: Lennart Poettering <lennart@xxxxxxxxxxxxxx>
• Re: raid1 with rotating offsite disks for backup
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: raid1 with rotating offsite disks for backup
  • From: NeilBrown <neilb@xxxxxxx>
• Re: raid1 with rotating offsite disks for backup
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• RE: raid1 with rotating offsite disks for backup
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• [PULL REQUEST] md updates for 2.6.38
  • From: NeilBrown <neilb@xxxxxxx>
• Re: raid1 with rotating offsite disks for backup
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: raid1 with rotating offsite disks for backup
  • From: Martin Cracauer <cracauer@xxxxxxxx>
• Re: raid1 with rotating offsite disks for backup
  • From: NeilBrown <neilb@xxxxxxx>
• Re: raid1 with rotating offsite disks for backup
  • From: Jeff Klingner <klingner@xxxxxxxxxxxx>
• Re: raid1 with rotating offsite disks for backup
  • From: NeilBrown <neilb@xxxxxxx>
• Re: raid1 with rotating offsite disks for backup
  • From: Jeff Klingner <klingner@xxxxxxxxxxxx>
• Re: [PATCH 0/2] FIX: Process hangs at wait_barrier
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] Spare migration tests updated
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] fix: array is reassembled inactive if stopped during resync
  • From: NeilBrown <neilb@xxxxxxx>
• Re: After 0->10 takeover process hangs at "wait_barrier"
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Periodic RebuildStarted event
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: Periodic RebuildStarted event
  • From: NeilBrown <neilb@xxxxxxx>
• Re: raid1 with rotating offsite disks for backup
  • From: NeilBrown <neilb@xxxxxxx>
• RE: Temporarily Disable Array
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: Periodic RebuildStarted event
  • From: Martin Cracauer <cracauer@xxxxxxxx>
• raid1 with rotating offsite disks for backup
  • From: Jeff Klingner <klingner@xxxxxxxxxxxx>
• Re: Periodic RebuildStarted event
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Periodic RebuildStarted event
  • From: Martin Cracauer <cracauer@xxxxxxxx>
• Re: [PATCH] md_make_request: don't touch the bio after calling make_request
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] Re: User space RAID-6 access
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH] Re: User space RAID-6 access
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• SSD - TRIM command
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• [PATCH] md_make_request: don't touch the bio after calling make_request
  • From: Chris Mason <chris.mason@xxxxxxxxxx>
• Re: RAID 5 parity layout left-symmetric vs right symmetric vs other choices
  • From: Beolach <beolach@xxxxxxxxx>
• Re: Mixing 512 bytes and 4K sector harddrives in a raid1?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: Mixing 512 bytes and 4K sector harddrives in a raid1?
  • From: Henrik Olsson <henrik@xxxxxxxx>
• Re: Mixing 512 bytes and 4K sector harddrives in a raid1?
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• [PATCH] Spare migration tests updated
  • From: "Czarnowska, Anna" <anna.czarnowska@xxxxxxxxx>
• Mixing 512 bytes and 4K sector harddrives in a raid1?
  • From: Henrik Olsson <henrik@xxxxxxxx>
• Re: raid1 sector size
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: raid1 sector size
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: raid1 sector size
  • From: Jérôme Poulin <jeromepoulin@xxxxxxxxx>
• Re: raid1 sector size
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• raid1 sector size
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Drew <drew.kay@xxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Drew <drew.kay@xxxxxxxxx>
• raid1 new read_balance
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• some read balance function for raid1
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: User space RAID-6 access
  • From: NeilBrown <neilb@xxxxxxx>
• Re: User space RAID-6 access
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• sector size
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: compile (newbie)
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: compile (newbie)
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: compile (newbie)
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: raid1 new read balance, first test, some doubt, can anyone help?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: compile (newbie)
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: raid1 new read balance, first test, some doubt, can anyone help?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: raid1 new read balance, first test, some doubt, can anyone help?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: compile (newbie)
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• SNIA DDF standard and Linux MD
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: raid1 new read balance, first test, some doubt, can anyone help?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: compile (newbie)
  • From: NeilBrown <neilb@xxxxxxx>
• raid1 new read balance, first test, some doubt, can anyone help?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Temporarily Disable Array
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• compile (newbie)
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• source code raid1.c
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: Reshaping RAID-0?
  • From: "Patrick J. LoPresti" <lopresti@xxxxxxxxx>
• Re: Reshaping RAID-0?
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Reshaping RAID-0?
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Reshaping RAID-0?
  • From: "Patrick J. LoPresti" <lopresti@xxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• [OT] Re: What's the typical RAID10 setup?
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• Re: [systemd-devel] systemd kills mdmon if it was started manually by user
  • From: Andrey Borzenkov <arvidjaar@xxxxxxx>
• Re: mdadm: ADD_NEW_DISK failed: Invalid argument
  • From: Jon Forrest <jlforrest@xxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• [PATCH 2/2] FIX: md: Prevent barrier become negative
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 1/2] FIX: md: process hangs at wait_barrier after 0->10 takeover
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 0/2] FIX: Process hangs at wait_barrier
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: hansbkk@xxxxxxxxx
• Re: What's the typical RAID10 setup?
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: Inconsistent UUIDs between mkconf vs blkid
  • From: hansbkk@xxxxxxxxx
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: hansbkk@xxxxxxxxx
• Re: What's the typical RAID10 setup?
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Inconsistent UUIDs between mkconf vs blkid
  • From: hansbkk@xxxxxxxxx
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Inconsistent UUIDs between mkconf vs blkid
  • From: hansbkk@xxxxxxxxx
• Re: What's the typical RAID10 setup?
  • From: hansbkk@xxxxxxxxx
• Re: mdadm: ADD_NEW_DISK failed: Invalid argument
  • From: NeilBrown <neilb@xxxxxxx>
• Re: mdadm: ADD_NEW_DISK failed: Invalid argument
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• mdadm: ADD_NEW_DISK failed: Invalid argument
  • From: Jon Forrest <jlforrest@xxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• RE: After 0->10 takeover process hangs at "wait_barrier"
  • From: "Wojcik, Krzysztof" <krzysztof.wojcik@xxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: raid1 - optimization
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: raid1 - optimization
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: raid1 - optimization
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• raid1 - optimization
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• [PATCH] fix: array is reassembled inactive if stopped during resync
  • From: "Czarnowska, Anna" <anna.czarnowska@xxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: [PATCH 6/8] FIX: Do not set array size after reshape in mdadm
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 3/8] imsm: FIX: Size is already set in metadata
  • From: NeilBrown <neilb@xxxxxxx>
• RE: [PATCH 6/8] FIX: Do not set array size after reshape in mdadm
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• RE: [PATCH 2/8] imsm: FIX: array size is wrong
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• RE: [PATCH 3/8] imsm: FIX: Size is already set in metadata
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• RE: [PATCH] imsm: FIX: crash during getting map
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: After 0->10 takeover process hangs at "wait_barrier"
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] imsm: FIX: size have to be calculated based on first map
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 0/8] Set of fixes for expansion
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 6/8] FIX: Do not set array size after reshape in mdadm
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 3/8] imsm: FIX: Size is already set in metadata
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 2/8] imsm: FIX: array size is wrong
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] imsm: FIX: crash during getting map
  • From: NeilBrown <neilb@xxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Drew <drew.kay@xxxxxxxxx>
• RE: Kernel 2.6.32-5-amd64 fails to boot.
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• RAID 5 parity layout left-symmetric vs right symmetric vs other choices
  • From: Budai Laszlo <laszlo.budai@xxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: RAID 5 - One drive dropped while replacing another
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• Re: RAID 5 - One drive dropped while replacing another
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• RE: Software RAID and Fakeraid
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID 5 - One drive dropped while replacing another
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• RE: Kernel 2.6.32-5-amd64 fails to boot.
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: Help - New Read algorithm
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: RAID 5 - One drive dropped while replacing another
  • From: hansbkk@xxxxxxxxx
• Help - New Read algorithm
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• RE: Bootable Raid-1
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: Bootable Raid-1
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID 5 - One drive dropped while replacing another
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: Kernel 2.6.32-5-amd64 fails to boot.
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: RAID 5 - One drive dropped while replacing another
  • From: hansbkk@xxxxxxxxx
• Re: RAID 5 - One drive dropped while replacing another
  • From: hansbkk@xxxxxxxxx
• Re: RAID 5 - One drive dropped while replacing another
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: Bootable Raid-1
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: Software RAID and Fakeraid
  • From: hansbkk@xxxxxxxxx
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: Bootable Raid-1
  • From: hansbkk@xxxxxxxxx
• Re: Software RAID and Fakeraid
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• Re: RAID 5 - One drive dropped while replacing another
  • From: hansbkk@xxxxxxxxx
• Re: RAID 5 - One drive dropped while replacing another
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: RAID 5 - One drive dropped while replacing another
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: RAID 5 - One drive dropped while replacing another
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: RAID 5 - One drive dropped while replacing another
  • From: hansbkk@xxxxxxxxx
• After 0->10 takeover process hangs at "wait_barrier"
  • From: "Wojcik, Krzysztof" <krzysztof.wojcik@xxxxxxxxx>
• Re: Kernel 2.6.32-5-amd64 fails to boot.
  • From: CoolCold <coolthecold@xxxxxxxxx>
• RE: Kernel 2.6.32-5-amd64 fails to boot.
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• RE: Kernel 2.6.32-5-amd64 fails to boot.
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: RAID 5 - One drive dropped while replacing another
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: Kernel 2.6.32-5-amd64 fails to boot.
  • From: Rudy Zijlstra <rudy@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Software RAID and Fakeraid
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [BUG 2.6.32] md/raid1: barrier disabling does not work correctly in all cases
  • From: Paul Clements <paul.clements@xxxxxxxxxxx>
• Re: [BUG 2.6.32] md/raid1: barrier disabling does not work correctly in all cases
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Software RAID and Fakeraid
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• RE: [PATCH] md: do not write resync checkpoint, if max_sector has been reached.
  • From: "Hawrylewicz Czarnowski, Przemyslaw" <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
• Re: RAID 5 - One drive dropped while replacing another
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• RAID 5 - One drive dropped while replacing another
  • From: Bryan Wintermute <bryanwintermute@xxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: Kernel 2.6.32-5-amd64 fails to boot.
  • From: Rudy Zijlstra <rudy@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• RE: Bootable Raid-1
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: Kernel 2.6.32-5-amd64 fails to boot.
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Bootable Raid-1
  • From: Naira Kaieski <naira@xxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: Kernel 2.6.32-5-amd64 fails to boot.
  • From: Rudy Zijlstra <rudy@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: User space RAID-6 access
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• RE: Kernel 2.6.32-5-amd64 fails to boot.
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: nbd / hot plug
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: [BUG 2.6.32] md/raid1: barrier disabling does not work correctly in all cases
  • From: Paul Clements <paul.clements@xxxxxxxxxxx>
• RE: Bootable Raid-1
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Kernel 2.6.32-5-amd64 fails to boot.
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Bootable Raid-1
  • From: Naira Kaieski <naira@xxxxxxxxx>
• Re: User space RAID-6 access
  • From: NeilBrown <neilb@xxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: User space RAID-6 access
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: nbd / hot plug
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Re: User space RAID-6 access
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: Software RAID and Fakeraid
  • From: lsorense@xxxxxxxxxxxxxxxxxxx (Lennart Sorensen)
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: Performance question, RAID5
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• [PATCH] imsm: FIX: size have to be calculated based on first map
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• RE: RAID HDDs spin up sequence
  • From: <brian.foster@xxxxxxx>
• Re: Performance question, RAID5
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• [PATCH 8/8] imsm: move common code for array size calculation to function
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 7/8] imsm: FIX: Debug strings cleanup
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 6/8] FIX: Do not set array size after reshape in mdadm
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 5/8] imsm: fix: imsm_num_data_members() can return error
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 4/8] imsm: FIX: put expansion finalization in to one place
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 0/8] Set of fixes for expansion
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 3/8] imsm: FIX: Size is already set in metadata
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 2/8] imsm: FIX: array size is wrong
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 1/8] FIX: Last checkpoint is not set
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: Performance question, RAID5
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Jon Nelson <jnelson-linux-raid@xxxxxxxxxxx>
• Re: documentation
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: Performance question, RAID5
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: Software RAID and Fakeraid
  • From: Michal Suchanek <hramrach@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: documentation
  • From: hansbkk@xxxxxxxxx
• Re: What's the typical RAID10 setup?
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: hansbkk@xxxxxxxxx
• [PATCH] imsm: FIX: crash during getting map
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Subject: ANNOUNCE: mdadm 3.2 - A tool for managing Soft RAID under Linux (DEVEL ONLY)
  • From: NeilBrown <neilb@xxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• Re: Software RAID and Fakeraid
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• Re: [PATCH] md: do not write resync checkpoint, if max_sector has been reached.
  • From: NeilBrown <neilb@xxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] patches addresses problem with memory corruption
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 1/2] Monitor: do not move partitions to external container
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] imsm: FIX: map coping causes mdmon crash
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 0/2] patches addresses problem with memory corruption
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] imsm: FIX: mdmon crash during 2 raid0 arrays expansion
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 2/2] imsm: Update metadata for second array
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 1/2] imsm:FIX: change arrays reshape order
  • From: NeilBrown <neilb@xxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: NeilBrown <neilb@xxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: NeilBrown <neilb@xxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Denis <denismpa@xxxxxxxxx>
• Re: documentation
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: Software RAID and Fakeraid
  • From: lsorense@xxxxxxxxxxxxxxxxxxx (Lennart Sorensen)
• Re: What's the typical RAID10 setup?
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Jon Nelson <jnelson-linux-raid@xxxxxxxxxxx>
• Re: documentation
  • From: NeilBrown <neilb@xxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: documentation
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: Performance question, RAID5
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: Performance question, RAID5
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• documentation
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Jon Nelson <jnelson-linux-raid@xxxxxxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: RAID HDDs spin up sequence
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: User space RAID-6 access
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Performance question, RAID5
  • From: NeilBrown <neilb@xxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• User space RAID-6 access
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• RAID HDDs spin up sequence
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: Software RAID and Fakeraid
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• RE: [PATCH] md: do not write resync checkpoint, if max_sector has been reached.
  • From: "Hawrylewicz Czarnowski, Przemyslaw" <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
• Re: Performance question, RAID5
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Denis <denismpa@xxxxxxxxx>
• Re: raid over ethernet
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: Software RAID and Fakeraid
  • From: lsorense@xxxxxxxxxxxxxxxxxxx (Lennart Sorensen)
• Re: What's the typical RAID10 setup?
  • From: Denis <denismpa@xxxxxxxxx>
• Re: Software RAID and Fakeraid
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• [PATCH 2/2] Assemble: allow to assemble container with uuid=0:0:0:0
  • From: "Czarnowska, Anna" <anna.czarnowska@xxxxxxxxx>
• [PATCH 1/2] Monitor: do not move partitions to external container
  • From: "Czarnowska, Anna" <anna.czarnowska@xxxxxxxxx>
• Re: raid over ethernet
  • From: Alexander Schreiber <als@xxxxxxxxxxxxxxx>
• [PATCH] imsm: FIX: map coping causes mdmon crash
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• RE: [PATCH 0/2] patches addresses problem with memory corruption
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• [PATCH 2/2] imsm: FIX: sizeof_imsm_dev() can return too small value
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 0/2] patches addresses problem with memory corruption
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 1/2] imsm: FIX: mdmon crash during 2 raid0 arrays expansion
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: raid over ethernet
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: Performance question, RAID5
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: raid over ethernet
  • From: Alexander Schreiber <als@xxxxxxxxxxxxxxx>
• Re: Performance question, RAID5
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• [PATCH] imsm: FIX: mdmon crash during 2 raid0 arrays expansion
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: CoolCold <coolthecold@xxxxxxxxx>
• [PATCH] imsm:FIX: change arrays reshape order (v2)
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: What's the typical RAID10 setup?
  • From: Robin Hill <robin@xxxxxxxxxxxxxxx>
• RE: [PATCH 1/2] imsm:FIX: change arrays reshape order
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• What's the typical RAID10 setup?
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: Performance question, RAID5
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• RE: [PATCH 1/2] imsm:FIX: change arrays reshape order
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• RE: [PATCH 2/2] imsm: Update metadata for second array
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• Re: [PATCH 2/2] imsm: Update metadata for second array
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 1/2] imsm:FIX: change arrays reshape order
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 2/2] imsm: Update metadata for second array
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 1/2] imsm:FIX: change arrays reshape order
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: Performance question, RAID5
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• RE: [PATCH] imsm: Update metadata for second array
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• Re: raid over ethernet
  • From: Denis <denismpa@xxxxxxxxx>
• Re: [PATCH] imsm: Update metadata for second array
  • From: NeilBrown <neilb@xxxxxxx>
• RE: [PATCH] imsm: Update metadata for second array
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• Re: [PATCH 0/2] Release 3.2 summary
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Performance question, RAID5
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: Performance question, RAID5
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] md: do not write resync checkpoint, if max_sector has been reached.
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] Man pages update for policy framework
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 2/2] 11spare-migration: pass conditions for tests 9 and 12 should be reversed
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 1/2] env-11spare-migration: imsm requires IMSM_NO_PLATFORM set with loop devices
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 0/1] unblock the creation of an external metadata RAID if native one exists
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [native] Bug report -cannot create a native raid on devel-3.2
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] imsm: FIX: not all disks are released in free_imsm_disks()
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] imsm: Update metadata for second array
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 0/2] Release 3.2 summary
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Performance question, RAID5
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• nbd / hot plug
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: Performance question, RAID5
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Performance question, RAID5
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: Performance question, RAID5
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: Performance question, RAID5
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: Performance question, RAID5
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Performance question, RAID5
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: Performance question, RAID5
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: Performance question, RAID5
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: Performance question, RAID5
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: Performance question, RAID5
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: Performance question, RAID5
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: Performance question, RAID5
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: Performance question, RAID5
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: raid over ethernet
  • From: Alexander Schreiber <als@xxxxxxxxxxxxxxx>
• Re: Performance question, RAID5
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: Performance question, RAID5
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: Performance question, RAID5
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: Performance question, RAID5
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Performance question, RAID5
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: Performance question, RAID5
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: Performance question, RAID5
  • From: CoolCold <coolthecold@xxxxxxxxx>
• Re: raid over ethernet
  • From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
• Re: raid over ethernet
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Performance question, RAID5
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Performance question, RAID5
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: raid over ethernet
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: raid over ethernet
  • From: Alexander Schreiber <als@xxxxxxxxxxxxxxx>
• Re: raid over ethernet
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• RE: [PATCH 0/2] Release 3.2 summary
  • From: "Wojcik, Krzysztof" <krzysztof.wojcik@xxxxxxxxx>
• Re: raid over ethernet
  • From: Spelic <spelic@xxxxxxxxxxxxx>
• raid over ethernet
  • From: Denis <denismpa@xxxxxxxxx>
• Re: raid over ethernet
  • From: Alexander Schreiber <als@xxxxxxxxxxxxxxx>
• Re: raid over ethernet
  • From: Alexander Schreiber <als@xxxxxxxxxxxxxxx>
• Re: raid over ethernet
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: Growing a single disk into a 2 disk raid0
  • From: NeilBrown <neilb@xxxxxxx>
• Re: raid over ethernet
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: raid over ethernet
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: raid over ethernet
  • From: Mikael Abrahamsson <swmike@xxxxxxxxx>
• Re: raid over ethernet
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: raid over ethernet
  • From: Jérôme Poulin <jeromepoulin@xxxxxxxxx>
• Re: partitions
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: partitions
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• Re: partitions
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• raid over ethernet
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: Growing a single disk into a 2 disk raid0
  • From: Hank Barta <hbarta@xxxxxxxxx>
• Re: partitions
  • From: Hank Barta <hbarta@xxxxxxxxx>
• Re: partitions
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: partitions
  • From: Doug Dumitru <doug@xxxxxxxxxx>
• Re: partitions
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• partitions
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: sub-array kicked out of raid6 on each reboot.
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: sub-array kicked out of raid6 on each reboot.
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: sub-array kicked out of raid6 on each reboot.
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• sub-array kicked out of raid6 on each reboot.
  • From: Janek Kozicki <janek_listy@xxxxx>
• Re: Growing a single disk into a 2 disk raid0
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• Re: Growing a single disk into a 2 disk raid0
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• Re: Growing a single disk into a 2 disk raid0
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: Growing a single disk into a 2 disk raid0
  • From: Berkey B Walker <berk@xxxxxxxxx>
• [PATCH] Man pages update for policy framework
  • From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
• Growing a single disk into a 2 disk raid0
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• [PATCH 2/2] 11spare-migration: pass conditions for tests 9 and 12 should be reversed
  • From: "Labun, Marcin" <Marcin.Labun@xxxxxxxxx>
• [PATCH 1/2] env-11spare-migration: imsm requires IMSM_NO_PLATFORM set with loop devices
  • From: "Labun, Marcin" <Marcin.Labun@xxxxxxxxx>
• RE: [PATCH 0/1] unblock the creation of an external metadata RAID if native one exists
  • From: "Labun, Marcin" <Marcin.Labun@xxxxxxxxx>
• [native] Bug report -cannot create a native raid on devel-3.2
  • From: "Labun, Marcin" <Marcin.Labun@xxxxxxxxx>
• [PATCH] imsm: FIX: not all disks are released in free_imsm_disks()
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxxxxxx>
• [PATCH] imsm: Update metadata for second array
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• RE: [PATCH 4/7] FIX: Array after takeover has to be frozen
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• RE: [PATCH 1/7] imsm: Update metadata for second array
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• Re: Help - raid not assembling right on boot (was: Resizing a RAID1)
  • From: Hank Barta <hbarta@xxxxxxxxx>
• Re: [PATCH 0/1] unblock the creation of an external metadata RAID if native one exists
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 0/2] Release 3.2 summary
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH] FIX: delta_disk can have UnSet value
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 7/7] FIX: start_reshape status should be checked
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 4/7] FIX: Array after takeover has to be frozen
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 3/7] imsm: FIX: do not allow for container operation for the same disks number
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 1/7] imsm: Update metadata for second array
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Help - raid not assembling right on boot (was: Resizing a RAID1)
  • From: Jérôme Poulin <jeromepoulin@xxxxxxxxx>
• Re: mdXX: bitmap superblock UUID mismatch
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Help - raid not assembling right on boot (was: Resizing a RAID1)
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH] md: do not write resync checkpoint, if max_sector has been reached.
  • From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
• [PATCH 2/2] FIX: Meet SET_ARRAY_INFO ioctl requirements
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 1/2] FIX: Remove disks in mdmon for external metadata
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 0/2] Release 3.2 summary
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• Re: Help - raid not assembling right on boot (was: Resizing a RAID1)
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• [PATCH] WORKAROUND: mdadm hangs during reshape (PART #2)
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH] md/raid5: FIX: reshape on degraded devices has wrong configuration
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: Help - raid not assembling right on boot (was: Resizing a RAID1)
  • From: Hank Barta <hbarta@xxxxxxxxx>
• Re: Help - raid not assembling right on boot (was: Resizing a RAID1)
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Help - raid not assembling right on boot (was: Resizing a RAID1)
  • From: Hank Barta <hbarta@xxxxxxxxx>
• Re: Help - raid not assembling right on boot (was: Resizing a RAID1)
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• [PATCH] FIX: delta_disk can have UnSet value
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• RE: [PATCH 2/4] imsm: FIX: spare cannot be added
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• RE: [PATCH 3/4] FIX: monitor doesn't handshake with md
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• RE: [PATCH] FIX: reshape_active flag is always set for external metadata
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• Help - raid not assembling right on boot (was: Resizing a RAID1)
  • From: Hank Barta <hbarta@xxxxxxxxx>
• Re: [PATCH 1/4] Add raid10 -> raid0 takeover support
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH] Dynamic hot-plug udev rules for policies
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 4/5] FIX: Validate input in ping_monitor function
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 3/5] Mistake in raid1->raid5 migration
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 2/5] Add raid1->raid0 takeover support
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 1/5] FIX: Unfreeze array if reshape_array wasn't succeded
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH] FIX: reshape_active flag is always set for external metadata
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 4/4] WORKAROUND: mdadm hangs during reshape
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 3/4] FIX: monitor doesn't handshake with md
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 2/4] imsm: FIX: spare cannot be added
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH] fix extended partition detection
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid1 mirror optimizations
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• mdXX: bitmap superblock UUID mismatch
  • From: Reynald Borer <reynald.borer@xxxxxxxxx>
• RE: [PATCH 0/5] Intel SAS controller support for IMSM
  • From: "Jiang, Dave" <dave.jiang@xxxxxxxxx>
• Re: raid1 mirror optimizations
  • From: Oliver Brakmann <obrakmann@xxxxxxx>
• Re: [PATCH 0/5] Intel SAS controller support for IMSM
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: raid1 mirror optimizations
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: raid1 mirror optimizations
  • From: Oliver Brakmann <obrakmann@xxxxxxx>
• [PATCH 7/7] FIX: start_reshape status should be checked
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 6/7] FIX: Container can be left frozen
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 5/7] imsm: FIX: spare cannot be added
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 4/7] FIX: Array after takeover has to be frozen
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 3/7] imsm: FIX: do not allow for container operation for the same disks number
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 2/7] FIX: monitor doesn't handshake with md
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 1/7] imsm: Update metadata for second array
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 0/7] Online Capacity Expansion (raid5/0, all arrays in container, rebased)
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: VFS: Cannot open root device "md1" or unknown-block(2,0)
  • From: Martin Mokrejs <mmokrejs@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH 6/6] FIX: Unblock disk in kernel only if it is blocked.
  • From: "Wojcik, Krzysztof" <krzysztof.wojcik@xxxxxxxxx>
• Re: raid1 mirror optimizations
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: [BUG 2.6.32] md/raid1: barrier disabling does not work correctly in all cases
  • From: Paul Clements <paul.clements@xxxxxxxxxxx>
• RE: [PATCH 4/6] FIX: Remove disks in mdmon for external metadata
  • From: "Wojcik, Krzysztof" <krzysztof.wojcik@xxxxxxxxx>
• RE: [PATCH 1/6] Limit no-restriping operations only for raid5
  • From: "Wojcik, Krzysztof" <krzysztof.wojcik@xxxxxxxxx>
• RE: [PATCH 1/4] Add raid10 -> raid0 takeover support
  • From: "Wojcik, Krzysztof" <krzysztof.wojcik@xxxxxxxxx>
• Re: raid1 mirror optimizations
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: Optimize RAID0 for max IOPS?
  • From: CoolCold <coolthecold@xxxxxxxxx>
• Re: Optimize RAID0 for max IOPS?
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: Optimize RAID0 for max IOPS?
  • From: Wolfgang Denk <wd@xxxxxxx>
• Re: Optimize RAID0 for max IOPS?
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Optimize RAID0 for max IOPS?
  • From: Wolfgang Denk <wd@xxxxxxx>
• Re: [PATCH 1/4] imsm: Update metadata for second array
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 0/5] Intel SAS controller support for IMSM
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 6/6] FIX: Unblock disk in kernel only if it is blocked.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 4/6] FIX: Remove disks in mdmon for external metadata
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 1/6] Limit no-restriping operations only for raid5
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 1/4] Add raid10 -> raid0 takeover support
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Optimize RAID0 for max IOPS?
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: Low cost PCI-E unRAID - Supermicro AOC-SASLP-MV8 Driver/LBA questions for HW owners/users
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• raid1 mirror optimizations
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: Optimize RAID0 for max IOPS?
  • From: Wolfgang Denk <wd@xxxxxxx>
• Re: Low cost PCI-E unRAID - Supermicro AOC-SASLP-MV8 Driver/LBA questions for HW owners/users
  • From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
• Re: Optimize RAID0 for max IOPS?
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH] Dynamic hot-plug udev rules for policies
  • From: "Labun, Marcin" <Marcin.Labun@xxxxxxxxx>
• Resizing a RAID1
  • From: Hank Barta <hbarta@xxxxxxxxx>
• [PATCH 1/1] unblock the creation of an external metadata RAID if native one exists
  • From: "Labun, Marcin" <Marcin.Labun@xxxxxxxxx>
• [PATCH 0/1] unblock the creation of an external metadata RAID if native one exists
  • From: "Labun, Marcin" <Marcin.Labun@xxxxxxxxx>
• Re: Help With RAID Configuration
  • From: Zdenek Kaspar <zkaspar82@xxxxxxxxx>
• Help With RAID Configuration
  • From: Carlos Mennens <carloswill@xxxxxxxxx>
• Re: Optimize RAID0 for max IOPS?
  • From: Emmanuel Florac <eflorac@xxxxxxxxxxxxxx>
• Re: Optimize RAID0 for max IOPS?
  • From: Wolfgang Denk <wd@xxxxxxx>
• Re: Optimize RAID0 for max IOPS?
  • From: Dave Chinner <david@xxxxxxxxxxxxx>
• Re: Optimize RAID0 for max IOPS?
  • From: Emmanuel Florac <eflorac@xxxxxxxxxxxxxx>
• RE: [PATCH] FIX: reshape_active flag is always set for external metadata
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• [PATCH] fix extended partition detection
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: Raid 5, 2 disk failed
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• Re: Raid 5, 2 disk failed
  • From: Neil Brown <neilb@xxxxxxx>
• RE: Low cost PCI-E unRAID - Supermicro AOC-SASLP-MV8 Driver/LBA questions for HW owners/users
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: Optimize RAID0 for max IOPS?
  • From: Dave Chinner <david@xxxxxxxxxxxxx>