Re: Linux tries to bring up raid before the disks are finished initializing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Mike,

I found you discussion regarding a problem you had with a PMP with an Adaptec 1430SA configuration with several SATA disks connected though 3 x SII3726 port multiplier

Could you please confirm this Adpatec card support properly PMP, because Adpatec support tech. say this card is not tested: "The 1430SA is a SATA 2 controller and has not been tested with expanders."

I am currently facing disk detection problem with the AMD700 SATA chip (cold book will either not detect any disk, or some of them, but warm reboot detects them all) that's why I envisage this Adpatec controller alternative.

It seems the SB700 series chip has a known problem with PMP (see http://en.wikipedia.org/wiki/AMD_700_chipset_series#Southbridges). Kernel I use is 2.6.32 (RHEL6).

Many thanks

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux