[Prev Page][Next Page]
- Re: [PATCH] LED control
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxx>
- [PATCH] Siano: SDIO interface driver - remove two redundant lines
- From: Uri Shkolnik <urishk@xxxxxxxxx>
- Re: [PATCH] LED control
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- Re: [PATCH] Fix notify callback prototype
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- [PATCH] Fix notify callback prototype
- From: Jean Delvare <khali@xxxxxxxxxxxx>
- [build failure] Re: [GIT PATCHES for 2.6.29-rc8] V4L/DVB fixes
- From: Ingo Molnar <mingo@xxxxxxx>
- Re: [GIT PATCHES for 2.6.29-rc8] V4L/DVB fixes
- From: Ingo Molnar <mingo@xxxxxxx>
- Re: Pinnacle PCTV Hybrid Pro Card (310c)... once again...
- From: Mateusz Jędrasik <m.jedrasik@xxxxxxxxx>
- Re: Pinnacle PCTV Hybrid Pro Card (310c)... once again...
- From: Ionic <ionic@xxxxxxxx>
- Re: Pinnacle PCTV Hybrid Pro Card (310c)... once again...
- From: Markus Rechberger <mrechberger@xxxxxxxxx>
- Re: Pinnacle PCTV Hybrid Pro Card (310c)... once again...
- From: Mihai Moldovan <ionic@xxxxxxxx>
- Re: Pinnacle PCTV Hybrid Pro Card (310c)... once again...
- From: Markus Rechberger <mrechberger@xxxxxxxxx>
- Pinnacle PCTV Hybrid Pro Card (310c)... once again...
- From: Mihai Moldovan <ionic@xxxxxxxx>
- Re: [RFC 6/7] ARM: DaVinci: DM646x Video: Add VPIF driver
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH] Update remaining references to old video4linux list
- From: Jean Delvare <khali@xxxxxxxxxxxx>
- Re: [RFC 7/7] ARM: DaVinci: DM646x Video: Add DM646x display driver
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH] Update remaining references to old video4linux list
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- [PATCH] Update remaining references to old video4linux list
- From: Jean Delvare <khali@xxxxxxxxxxxx>
- [PULL] http://linuxtv.org/hg/~awalls/v4l-dvb
- From: Andy Walls <awalls@xxxxxxxxx>
- Re: [PATCH] LED control
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- [cron job] v4l-dvb daily build 2.6.22 and up: WARNINGS, 2.6.16-2.6.21: ERRORS
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- [PATCH] MAINTAINERS: Drop references to deprecated video4linux list
- From: Jean Delvare <khali@xxxxxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- [PATCH] add new frequency table for Strasbourg, France
- From: Benjamin Zores <benjamin.zores@xxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Mike Isely <isely@xxxxxxxxx>
- Re: [PATCH 1/1] siano: add high level SDIO interface driver for SMS based cards
- From: Alexey Klimov <klimov.linux@xxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Mike Isely <isely@xxxxxxxxx>
- Re: [PATCH 1/1] siano: add high level SDIO interface driver for SMS based cards
- From: Patrick Boettcher <patrick.boettcher@xxxxxxx>
- [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [RFC 2/7] ARM: DaVinci: DM646x Video: ADV7343 video encoder driver
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH] LED control
- From: Andy Walls <awalls@xxxxxxxxx>
- Re: Fw: [PATCH 1/1 re-submit 1] sdio: add low level i/o functions for workarounds
- From: Uri Shkolnik <urishk@xxxxxxxxx>
- Re: [PATCH] LED control
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- Re: [RFC 4/7] ARM: DaVinci: DM646x Video: Defintions for standards supported by display
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH 1/1] siano: add high level SDIO interface driver for SMS based cards
- From: Uri Shkolnik <urishk@xxxxxxxxx>
- Re: [RFC 3/7] ARM: DaVinci: DM646x Video: THS7303 video amplifier driver
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH] LED control
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- [PATCH] LED control
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- Re: [PATCH] dvb-api: update documentation, chapter1
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: OMAP3 ISP and camera drivers (update)
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [PATCH 1/1] siano: add high level SDIO interface driver for SMS based cards
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [PATCH 1/1] siano: add high level SDIO interface driver for SMS based cards
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [PATCH 1/1] siano: add high level SDIO interface driver for SMS based cards
- From: Patrick Boettcher <patrick.boettcher@xxxxxxx>
- Re: [PATCH 1/1] siano: add high level SDIO interface driver for SMS based cards
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Fw: [PATCH 1/1 re-submit 1] sdio: add low level i/o functions for workarounds
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [PATCH] Fix the issue with audio module & correction of Names
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Compro T750F - frontend initialization failing
- From: Andrew Reay <certain@xxxxxxxxxx>
- Re: The right way to interpret the content of SNR, signal strength and BER from HVR 4000 Lite
- From: Andy Walls <awalls@xxxxxxxxx>
- Re: cx231xx review of i2c handling
- From: Andy Walls <awalls@xxxxxxxxx>
- Re: The right way to interpret the content of SNR, signal strength and BER from HVR 4000 Lite
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: The right way to interpret the content of SNR, signal strength and BER from HVR 4000 Lite
- From: Andy Walls <awalls@xxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: The right way to interpret the content of SNR, signal strength and BER from HVR 4000 Lite
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- [PATCH v2 2/4] pxa_camera: remove YUV planar formats hole
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH v2 3/4] pxa_camera: Redesign DMA handling
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH v2 4/4] pxa_camera: Fix overrun condition on last buffer
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH v2 0/4] pxa_camera: DMA redesign
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH v2 1/4] pxa_camera: Enforce YUV422P frame sizes to be 16 multiples
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: The right way to interpret the content of SNR, signal strength and BER from HVR 4000 Lite
- From: Devin Heitmueller <devin.heitmueller@xxxxxxxxx>
- Re: The right way to interpret the content of SNR, signal strength and BER from HVR 4000 Lite
- From: VDR User <user.vdr@xxxxxxxxx>
- Re: The right way to interpret the content of SNR, signal strength and BER from HVR 4000 Lite
- From: Michael Krufky <mkrufky@xxxxxxxxxxx>
- Re: [linux-dvb] Question about if HVR1200 support 64Bit
- From: Michael Krufky <mkrufky@xxxxxxxxxxx>
- Re: The right way to interpret the content of SNR, signal strength and BER from HVR 4000 Lite
- From: Devin Heitmueller <devin.heitmueller@xxxxxxxxx>
- Re: The right way to interpret the content of SNR, signal strength and BER from HVR 4000 Lite
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- RE: [PATCH 5/5] LDP: Add support for built-in camera
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Brandon Philips <brandon@xxxxxxxx>
- [cron job] v4l-dvb daily build 2.6.22 and up: WARNINGS, 2.6.16-2.6.21: OK
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: [RFC 5/7] ARM: DaVinci: DM646x Video: Makefile and config files modifications for Display
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [REVIEW] Draft of V4L2 API and spec changes for V4L2_MPEG_STREAM_VBI_FMT_IVTV
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [REVIEW] Draft of V4L2 API and spec changes for V4L2_MPEG_STREAM_VBI_FMT_IVTV
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- [GIT PATCHES for 2.6.29-rc8] V4L/DVB fixes
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Brandon Philips <brandon@xxxxxxxx>
- [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [RFC 0/7] ARM: DaVinci: DM646x Video: DM646x display driver
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: The right way to interpret the content of SNR, signal strength and BER from HVR 4000 Lite
- From: Devin Heitmueller <devin.heitmueller@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: Devin Heitmueller <devin.heitmueller@xxxxxxxxx>
- [PULL] soc-camera: core, API and driver updates
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: frequency file for dvb-t/it-Verona-Sommacampagna
- From: Christoph Pfister <christophpfister@xxxxxxxxx>
- Re: Initial tuning file update for fi-*
- From: Christoph Pfister <christophpfister@xxxxxxxxx>
- Re: [PATCH] mt9t031 bugfix
- From: Guennadi Liakhovetski <lg@xxxxxxx>
- [pull] http://linuxtv.org/hg/~tap/v4l-dvb
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- [RFC 2/7] ARM: DaVinci: DM646x Video: ADV7343 video encoder driver
- [RFC 7/7] ARM: DaVinci: DM646x Video: Add DM646x display driver
- [RFC 6/7] ARM: DaVinci: DM646x Video: Add VPIF driver
- [RFC 5/7] ARM: DaVinci: DM646x Video: Makefile and config files modifications for Display
- [RFC 4/7] ARM: DaVinci: DM646x Video: Defintions for standards supported by display
- Re: Kconfig changes in /hg/v4l-dvb caused dvb_usb_cxusb to stop building (fwd)
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- [RFC 3/7] ARM: DaVinci: DM646x Video: THS7303 video amplifier driver
- [RFC 1/7] ARM: DaVinci: DM646x Video: Platform and board specific setup
- About multifrontend - initalisation of dvb_frontend.id value
- From: Matthias Schwarzott <zzam@xxxxxxxxxx>
- [cron job] v4l-dvb daily build 2.6.22 and up: WARNINGS, 2.6.16-2.6.21: OK
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- [RFC 0/7] ARM: DaVinci: DM646x Video: DM646x display driver
- [RFC 1/7] ARM: DaVinci: DM646x Video: Platform and board specific setup
- [RFC 0/7] ARM: DaVinci: DM646x Video: DM646x display driver
- Re: Improve DKMS build of v4l-dvb?
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- getting started
- From: Rolf Schumacher <mailinglist@xxxxxxxxx>
- Re: Kconfig changes in /hg/v4l-dvb caused dvb_usb_cxusb to stop building (fwd)
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: [PATCH] mt9t031 bugfix
- From: Philippe Rétornaz <philippe.retornaz@xxxxxxx>
- Re: [PATCH] cx88: Add IR support to pcHDTV HD3000 & HD5500
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: identifying camera sensor
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: The right way to interpret the content of SNR, signal strength and BER from HVR 4000 Lite
- From: Ang Way Chuang <wcang@xxxxxxxx>
- Re: [stable] Fwd: [PATCH] 2.6.27.y: fix NULL ptr deref in cx23885 video_open
- From: Greg KH <greg@xxxxxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] Add cx231xx USB driver
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
- Re: [stable] Fwd: [PATCH] 2.6.27.y: fix NULL ptr deref in cx23885 video_open
- From: Jarod Wilson <jarod@xxxxxxxxxxxx>
- kernel oops in dvb_net
- From: Ang Way Chuang <wcang@xxxxxxxx>
- Re: [stable] Fwd: [PATCH] 2.6.27.y: fix NULL ptr deref in cx23885 video_open
- From: Greg KH <greg@xxxxxxxxx>
- Re: The right way to interpret the content of SNR, signal strength and BER from HVR 4000 Lite
- From: VDR User <user.vdr@xxxxxxxxx>
- The right way to interpret the content of SNR, signal strength and BER from HVR 4000 Lite
- From: Ang Way Chuang <wcang@xxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] Add cx231xx USB driver
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH 1/1] siano: add high level SDIO interface driver for SMS based cards
- From: Uri Shkolnik <urishk@xxxxxxxxx>
- getting started
- From: Rolf Schumacher <mailinglist@xxxxxxxxx>
- [PATCH] Add support for ProVideo PV-183 to bttv (take 2 - changed spaces to tabs)
- From: Alan McIvor <alan.mcivor@xxxxxxxxxxxx>
- Re: [PATCH] Add support for ProVideo PV-183 to bttv
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: Fwd: [stable] [PATCH] 2.6.27.y: fix NULL ptr deref in cx23885 video_open
- From: Andy Walls <awalls@xxxxxxxxx>
- Re: disable v4l2-ctl logging --log-status in /var/log/messages
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: disable v4l2-ctl logging --log-status in /var/log/messages
- From: Andy Walls <awalls@xxxxxxxxx>
- cx231xx review of i2c handling
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: Fwd: [stable] [PATCH] 2.6.27.y: fix NULL ptr deref in cx23885 video_open
- From: Michael Krufky <mkrufky@xxxxxxxxxxx>
- Re: Fwd: [stable] [PATCH] 2.6.27.y: fix NULL ptr deref in cx23885 video_open
- From: Andy Walls <awalls@xxxxxxxxx>
- [PATCH] Add support for ProVideo PV-183 to bttv
- From: Alan McIvor <alan.mcivor@xxxxxxxxxxxx>
- [Fwd: Re: [linux-dvb] getting started]
- From: Rolf Schumacher <mailinglist@xxxxxxxxx>
- Re: [linux-dvb] getting started
- From: Rolf Schumacher <mailinglist@xxxxxxxxx>
- Re: [PATCH 1/1] siano: add high level SDIO interface driver for SMS based cards
- From: Alexey Klimov <klimov.linux@xxxxxxxxx>
- [linux-dvb] getting started
- From: Rolf Schumacher <mailinglist@xxxxxxxxx>
- Re: [PATCH 4/4] pxa_camera: Fix overrun condition on last buffer
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [linux-dvb] getting started
- From: Thomas Kaiser <v4l@xxxxxxxxxxxxxxx>
- Re: [linux-dvb] getting started
- From: Antti Palosaari <crope@xxxxxx>
- [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH 4/4] pxa_camera: Fix overrun condition on last buffer
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Fwd: [stable] [PATCH] 2.6.27.y: fix NULL ptr deref in cx23885 video_open
- From: Michael Krufky <mkrufky@xxxxxxxxxxx>
- Re: [PATCH 2/5] pcm990 baseboard: add camera bus width switch setting
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [cron job] v4l-dvb daily build 2.6.22 and up: ERRORS, 2.6.16-2.6.21: ERRORS
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: [PATCH 2/5] pcm990 baseboard: add camera bus width switch setting
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- [PULL] gspca
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- Re: [PATCH] mt9t031 bugfix
- From: Guennadi Liakhovetski <lg@xxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: Devin Heitmueller <devin.heitmueller@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [PATCH 1/1] siano: add high level SDIO interface driver for SMS based cards
- From: Uri Shkolnik <urishk@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: Devin Heitmueller <devin.heitmueller@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: [PATCH 0/5] V2: soc-camera: setting the buswidth of camera sensors
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/5] pcm990 baseboard: add camera bus width switch setting
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: Devin Heitmueller <devin.heitmueller@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: Devin Heitmueller <devin.heitmueller@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- [PATCH 1/1] siano: add high level SDIO interface driver for SMS based cards
- From: Uri Shkolnik <urishk@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: Michael Krufky <mkrufky@xxxxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: Michael Krufky <mkrufky@xxxxxxxxxxx>
- Re: [PATCH 0/5] V2: soc-camera: setting the buswidth of camera sensors
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: null pointer access in error path of lgdt3305 driver
- From: David Ellingsworth <david@xxxxxxxxxxxxxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] Add cx231xx USB driver
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
- [PULL] Rhttp://linuxtv.org/hg/~mkrufky/lgdt3305 ( was - e: null pointer access in error path of lgdt3305 driver )
- From: Michael Krufky <mkrufky@xxxxxxxxxxx>
- Re: [PATCH 2/5] pcm990 baseboard: add camera bus width switch setting
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- [PATCH 1/1] sdio: add cards ids for sms (Siano Mobile Silicon) MDTV receivers
- From: Uri Shkolnik <urishk@xxxxxxxxx>
- [PATCH 1/1 re-submit 1] sdio: add low level i/o functions for workarounds
- From: Uri Shkolnik <urishk@xxxxxxxxx>
- Re: [PATCH 1/1] sdio: add low level i/o functions for workarounds
- From: Uri Shkolnik <urishk@xxxxxxxxx>
- [PATCH 1/1] sdio: add low level i/o functions for workarounds
- From: Uri Shkolnik <urishk@xxxxxxxxx>
- [PATCH 5/5] soc-camera: remove now unused gpio member of struct soc_camera_link
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 4/5] mt9v022: allow setting of bus width from board code
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/5] mt9m001: allow setting of bus width from board code
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/5] soc-camera: add board hook to specify the buswidth for camera sensors
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/5] pcm990 baseboard: add camera bus width switch setting
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 0/5] V2: soc-camera: setting the buswidth of camera sensors
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] Add cx231xx USB driver
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- null pointer access in error path of lgdt3305 driver
- From: Matthias Schwarzott <zzam@xxxxxxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] Add cx231xx USB driver
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] Fix I2C bridge error in zl10353
- From: Antti Palosaari <crope@xxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] Fix I2C bridge error in zl10353
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- [cron job] v4l-dvb daily build 2.6.22 and up: ERRORS, 2.6.16-2.6.21: ERRORS
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: disable v4l2-ctl logging --log-status in /var/log/messages
- From: Gregor Fuis <gujs.lists@xxxxxxxxx>
- Re: [PATCH 2/4] pcm990 baseboard: add camera bus width switch setting
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 4/4] mt9v022: allow setting of bus width from board code
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: EC168 support?!
- From: bloehei <bloehei@xxxxxxxx>
- Re: disable v4l2-ctl logging --log-status in /var/log/messages
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: [PATCH 2/4] pcm990 baseboard: add camera bus width switch setting
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- disable v4l2-ctl logging --log-status in /var/log/messages
- From: Gregor Fuis <gujs.lists@xxxxxxxxx>
- Re: [PATCH 3/4] mt9m001: allow setting of bus width from board code
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: SDIO stack patch
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [PATCH 2/4] pcm990 baseboard: add camera bus width switch setting
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- SDIO stack patch
- From: Uri Shkolnik <urishk@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [PATCH 2/4] pcm990 baseboard: add camera bus width switch setting
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [PATCH 2/4] pcm990 baseboard: add camera bus width switch setting
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/4] pcm990 baseboard: add camera bus width switch setting
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [PATCH 1/4] soc-camera: add board hook to specify the buswidth for camera sensors
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] Add cx231xx USB driver
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Call for Participation: VRST 2009
- From: Christian Sandor <chris.sandor@xxxxxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] Fix I2C bridge error in zl10353
- From: Dmitri Belimov <d.belimov@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~mkrufky/sms1xxx-gpio
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~mkrufky/sms1xxx-gpio
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: Devin Heitmueller <devin.heitmueller@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dougsland/v4l-dvb
- From: hermann pitton <hermann-pitton@xxxxxxxx>
- Re: [PATCH] ov772x: Add extra setting method
- From: morimoto.kuninori@xxxxxxxxxxx
- Re: [PULL] http://linuxtv.org/hg/~mkrufky/sms1xxx-gpio
- From: Michael Krufky <mkrufky@xxxxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~mkrufky/sms1xxx-gpio
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Brandon Philips <brandon@xxxxxxxx>
- [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH 2/4] pxa_camera: Redesign DMA handling
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH 2/4] pxa_camera: Redesign DMA handling
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: Devin Heitmueller <devin.heitmueller@xxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/4] pxa_camera: Redesign DMA handling
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: Andy Walls <awalls@xxxxxxxxx>
- [REVIEW] Draft of V4L2 API and spec changes for V4L2_MPEG_STREAM_VBI_FMT_IVTV
- From: Andy Walls <awalls@xxxxxxxxx>
- [cron job] v4l-dvb daily build 2.6.22 and up: ERRORS, 2.6.16-2.6.21: ERRORS
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: Topro 6800 driver
- From: Thomas Kaiser <v4l@xxxxxxxxxxxxxxx>
- Re: [PATCH 4/4] pxa_camera: Fix overrun condition on last buffer
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: linux-next: Tree for March 11 (staging/multimedia)
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: linux-next: Tree for March 11 (staging/multimedia)
- From: Greg KH <gregkh@xxxxxxx>
- Re: [PATCH 2/4] pxa_camera: Redesign DMA handling
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: linux-next: Tree for March 11 (staging/multimedia)
- From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
- Re: linux-next: Tree for March 11 (staging/multimedia)
- From: Greg KH <gregkh@xxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dougsland/v4l-dvb
- From: Devin Heitmueller <devin.heitmueller@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dougsland/v4l-dvb
- From: Douglas Schilling Landgraf <dougsland@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dougsland/v4l-dvb
- From: Douglas Schilling Landgraf <dougsland@xxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Brandon Philips <brandon@xxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~mkrufky/sms1xxx-gpio
- From: Uri Shkolnik <urishk@xxxxxxxxx>
- Re: linux-next: Tree for March 11 (staging/multimedia)
- From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~mkrufky/sms1xxx-gpio
- From: Uri Shkolnik <urishk@xxxxxxxxx>
- Re: OMAP3 ISP and camera drivers (update)
- From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PULL] http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2
- From: Devin Heitmueller <devin.heitmueller@xxxxxxxxx>
- Re: Topro 6800 driver
- From: Anders Blomdell <anders.blomdell@xxxxxxxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~mkrufky/sms1xxx-gpio
- From: Devin Heitmueller <devin.heitmueller@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~mkrufky/sms1xxx-gpio
- From: Michael Krufky <mkrufky@xxxxxxxxxxx>
- Re: Improve DKMS build of v4l-dvb?
- From: Alain Kalker <miki@xxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~mkrufky/sms1xxx-gpio
- From: Uri Shkolnik <urishk@xxxxxxxxx>
- Re: Improve DKMS build of v4l-dvb?
- From: Devin Heitmueller <devin.heitmueller@xxxxxxxxx>
- Re: [hg:v4l-dvb] cx88: Prevent general protection fault on rmmod
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
- Re: EC168 support?!
- From: Antti Palosaari <crope@xxxxxx>
- [PATCH] omap24xxcam: Fix use count handling if sensor enable fails in open()
- From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] pxa_camera: Redesign DMA handling
- From: robert.jarzmik@xxxxxxx
- Re: EC168 support?!
- From: bloehei <bloehei@xxxxxxxx>
- Re: [PATCH] libv4lconvert support for SQ905C decompression (revised)
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~mkrufky/sms1xxx-gpio
- From: Michael Krufky <mkrufky@xxxxxxxxxxx>
- Re: [PATCH] pxa_camera: Redesign DMA handling
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: Improve DKMS build of v4l-dvb?
- From: Alain Kalker <miki@xxxxxx>
- Re: Improve DKMS build of v4l-dvb?
- From: Alain Kalker <miki@xxxxxx>
- Re: Improve DKMS build of v4l-dvb?
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [PATCH] ov772x: Add extra setting method
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: Improve DKMS build of v4l-dvb?
- From: Alain Kalker <miki@xxxxxx>
- Re: EC168 support?!
- From: Antti Palosaari <crope@xxxxxx>
- EC168 support?!
- From: bloehei <bloehei@xxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: [PATCH 4/4] mt9v022: allow setting of bus width from board code
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 4/4] mt9v022: allow setting of bus width from board code
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~mkrufky/sms1xxx-gpio
- From: Uri Shkolnik <urishk@xxxxxxxxx>
- [PATCH 4/4] mt9v022: allow setting of bus width from board code
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 0/4] soc-camera: setting the buswidth of camera sensors
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/4] mt9m001: allow setting of bus width from board code
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/4] pcm990 baseboard: add camera bus width switch setting
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/4] soc-camera: add board hook to specify the buswidth for camera sensors
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: atmel v4l2 soc driver
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- atmel v4l2 soc driver
- From: Sedji Gaouaou <sedji.gaouaou@xxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Alexey Klimov <klimov.linux@xxxxxxxxx>
- Re: [hg:v4l-dvb] cx88: Prevent general protection fault on rmmod
- From: Jean Delvare <khali@xxxxxxxxxxxx>
- demux device not gettting registered:(
- From: Lakshmi Vallathol <laks.810@xxxxxxxxx>
- frequency file for dvb-t/it-Verona-Sommacampagna
- From: Stefano Danzi <s.danzi@xxxxxxxx>
- Re: [RFC] API changes for V4L2_MPEG_SLICED_VBI_FMT_IVTV definitions (Re: [PULL] http://linuxtv.org/hg/~awalls/cx18)
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- [PULL] http://linuxtv.org/hg/~mkrufky/lgdt3305
- From: Michael Krufky <mkrufky@xxxxxxxxxxx>
- [pull] http://linuxtv.org/hg/~tap/v4l-dvb-zoran
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] Fix I2C bridge error in zl10353
- From: Dmitri Belimov <d.belimov@xxxxxxxxx>
- A question about documentation.
- From: kilgota@xxxxxxxxxxxxxxxxxxxxxx
- Re: [RFC] API changes for V4L2_MPEG_SLICED_VBI_FMT_IVTV definitions (Re: [PULL] http://linuxtv.org/hg/~awalls/cx18)
- From: Andy Walls <awalls@xxxxxxxxx>
- [cron job] v4l-dvb daily build 2.6.22 and up: ERRORS, 2.6.16-2.6.21: ERRORS
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- [PULL] http://linuxtv.org/hg/~mkrufky/lgdt3305
- From: Michael Krufky <mkrufky@xxxxxxxxxxx>
- [Patch] Add support for Terratec Cinergy HT PCI MKII
- From: Stephan Wienczny <Stephan@xxxxxxxxxxx>
- Re: [PATCH 2/4] pxa_camera: Redesign DMA handling
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] v4l2-ioctl: get rid of video_decoder.h
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- How to utilize DVB Network API
- From: Bob Ingraham <bobi@xxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-notify
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Brandon Philips <brandon@xxxxxxxx>
- [cron job] v4l-dvb daily build 2.6.22 and up: ERRORS, 2.6.16-2.6.21: ERRORS
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: V4L2 spec
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: [PATCH 1/4] pxa_camera: Remove YUV planar formats hole
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: V4L2 spec
- From: wk <handygewinnspiel@xxxxxx>
- Re: [PATCH 21/31] video: Auto-load videodev module when device opened.
- From: Matthias Schwarzott <zzam@xxxxxxxxxx>
- [PATCH] flexcop-pci: Print a message in case the new stream watchdog detects a problem
- From: Matthias Schwarzott <zzam@xxxxxxxxxx>
- Re: V4L2 spec
- From: wk <handygewinnspiel@xxxxxx>
- [PATCH 21/31] video: Auto-load videodev module when device opened.
- From: Scott James Remnant <scott@xxxxxxxxxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] Fix I2C bridge error in zl10353
- From: Antti Palosaari <crope@xxxxxx>
- Re: [linux-dvb] Not able to view HD-TV via Technisat Skystar HD 2
- From: Hartmut <spieluhr@xxxxxxxxxx>
- Re: [linux-dvb] Not able to view HD-TV via Technisat Skystar HD 2
- From: Goga777 <goga777@xxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] v4l2-ioctl: get rid of video_decoder.h
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: [REVIEW PATCH 11/14] OMAP34XXCAM: Add driver
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] Fix I2C bridge error in zl10353
- From: Antti Palosaari <crope@xxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] Fix I2C bridge error in zl10353
- From: Dmitri Belimov <d.belimov@xxxxxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] v4l2-ioctl: get rid of video_decoder.h
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] Fix I2C bridge error in zl10353
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [REVIEW PATCH 11/14] OMAP34XXCAM: Add driver
- From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Twinhan DVB-T card does not tune with 2.6.29
- From: Ralf Gerbig <rge@xxxxxxxxxxx>
- Re: Initial tuning file update for fi-*
- From: Antti Palosaari <crope@xxxxxx>
- Re: [PATCH] DVB-USB: correct the comment about KEY_SLEEP
- From: Antti Palosaari <crope@xxxxxx>
- Re: [PATCH 2/4] pxa_camera: Redesign DMA handling
- From: robert.jarzmik@xxxxxxx
- Re: [linuxtv-commits] [hg:v4l-dvb] Fix I2C bridge error in zl10353
- From: Antti Palosaari <crope@xxxxxx>
- Re: OMAP3 ISP and camera drivers (update)
- From: "Dongsoo, Nathaniel Kim" <dongsoo.kim@xxxxxxxxx>
- Re: [PATCH 2/4] pxa_camera: Redesign DMA handling
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] v4l2-ioctl: get rid of video_decoder.h
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: [PATCH 2/4] pxa_camera: Redesign DMA handling
- From: robert.jarzmik@xxxxxxx
- Re: OMAP3 ISP and camera drivers (update)
- From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- RE: [PATCH 5/5] LDP: Add support for built-in camera
- From: "stanley.miao" <stanley.miao@xxxxxxxxxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] v4l2-ioctl: get rid of video_decoder.h
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
- Re: Compro VideoMate U90
- From: scott <scottlegs@xxxxxxxxx>
- Re: [patch] radio-rtrack2: fix double mutex_unlock
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: [patch review] radio-terratec: remove unused delay.h
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- [patch] radio-rtrack2: fix double mutex_unlock
- From: Alexey Klimov <klimov.linux@xxxxxxxxx>
- [patch review] radio-terratec: remove unused delay.h
- From: Alexey Klimov <klimov.linux@xxxxxxxxx>
- RE: [PATCH 3/5] OV3640: Add driver
- From: "Menon, Nishanth" <nm@xxxxxx>
- Re: saa7134 and RDS
- From: Dmitri Belimov <d.belimov@xxxxxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] v4l2-ioctl: get rid of video_decoder.h
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH 3/5] OV3640: Add driver
- From: "Tuukka.O Toivonen" <tuukka.o.toivonen@xxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: saa7134 and RDS
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: V4L2 spec
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Compro VideoMate U90
- From: scott <scottlegs@xxxxxxxxx>
- [PULL] http://linuxtv.org/hg/~mkrufky/dibcom
- From: Michael Krufky <mkrufky@xxxxxxxxxxx>
- Re: saa7134 and RDS
- From: Dmitri Belimov <d.belimov@xxxxxxxxx>
- Re: [RFC] API changes for V4L2_MPEG_SLICED_VBI_FMT_IVTV definitions (Re: [PULL] http://linuxtv.org/hg/~awalls/cx18)
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-notify
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: V4L2 spec
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: V4L2 spec
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: V4L2 spec
- From: Andy Walls <awalls@xxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: V4L2 spec
- From: Andy Walls <awalls@xxxxxxxxx>
- Re: Improve DKMS build of v4l-dvb?
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: About the radio-si470x driver for I2C interface
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- [PATCH] pwc : fix LED and power setup for first open
- From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
- Re: [PATCH 2/4] pxa_camera: Redesign DMA handling
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: V4L2 spec
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: V4L2 spec
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: V4L2 spec
- From: Devin Heitmueller <devin.heitmueller@xxxxxxxxx>
- Re: V4L2 spec
- From: wk <handygewinnspiel@xxxxxx>
- Re: [RFC] API changes for V4L2_MPEG_SLICED_VBI_FMT_IVTV definitions (Re: [PULL] http://linuxtv.org/hg/~awalls/cx18)
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- RE: [PATCH 3/5] OV3640: Add driver
- From: "Menon, Nishanth" <nm@xxxxxx>
- RE: [PATCH 4/5] OMAP3430SDP: Add support for Camera Kit v3
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- Re: [RFC] API changes for V4L2_MPEG_SLICED_VBI_FMT_IVTV definitions (Re: [PULL] http://linuxtv.org/hg/~awalls/cx18)
- From: Andy Walls <awalls@xxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Andy Walls <awalls@xxxxxxxxx>
- RE: [PATCH 3/5] OV3640: Add driver
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- RE: [PATCH 3/5] OV3640: Add driver
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- Re: Kworld atsc 110 nxt2004 init
- From: Jonathan Isom <jeisom@xxxxxxxxx>
- Re: [PATCH 2/4] pxa_camera: Redesign DMA handling
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: Topro 6800 driver
- From: Thomas Kaiser <v4l@xxxxxxxxxxxxxxx>
- Mail list, Is WIKI up to date?
- From: Thomas Kaiser <v4l@xxxxxxxxxxxxxxx>
- Re: Topro 6800 driver
- From: Anders Blomdell <anders.blomdell@xxxxxxxxxxxxxx>
- RE: [PATCH 5/5] LDP: Add support for built-in camera
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- Re: Topro 6800 driver
- From: Thomas Kaiser <v4l@xxxxxxxxxxxxxxx>
- Re: V4L2 spec
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH 4/4] pxa_camera: Fix overrun condition on last buffer
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [cron job] v4l-dvb daily build 2.6.22 and up: ERRORS, 2.6.16-2.6.21: ERRORS
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: [PATCH 1/4] pxa_camera: Remove YUV planar formats hole
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- RE: OMAP3 ISP and camera drivers (update)
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~mkrufky/sms1xxx-gpio
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-radio
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- RE: [PATCH 1/5] MT9P012: Add driver
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- Re: saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
- From: Henrik Beckman <henrik.list@xxxxxxxxx>
- Improve DKMS build of v4l-dvb?
- From: Alain Kalker <miki@xxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dougsland/v4l-dvb
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: Problem with changeset 10837: causes "make all" not to build many modules
- From: Alain Kalker <miki@xxxxxx>
- Re: [PATCH 4/4] pxa_camera: Fix overrun condition on last buffer
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [PATCH 2/4] pxa_camera: Redesign DMA handling
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: V4L2 spec
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: OMAP3 ISP and camera drivers (update)
- From: "Dongsoo, Nathaniel Kim" <dongsoo.kim@xxxxxxxxx>
- Re: Kconfig changes in /hg/v4l-dvb caused dvb_usb_cxusb to stop building (fwd)
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [PATCH 1/4] pxa_camera: Remove YUV planar formats hole
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
- From: Henrik Beckman <henrik.list@xxxxxxxxx>
- Re: OMAP3 ISP and camera drivers (update)
- From: Arun KS <getarunks@xxxxxxxxx>
- Re: lifeview NOT LV3H not working
- From: vic <vic@xxxxxxxxxxxxxxxxx>
- Re: Is there any reference for v4l2-subdev?
- From: "Dongsoo, Nathaniel Kim" <dongsoo.kim@xxxxxxxxx>
- Re: video4linux-list@xxxxxxxxxx
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-notify
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: Is there any reference for v4l2-subdev?
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [RFC] API changes for V4L2_MPEG_SLICED_VBI_FMT_IVTV definitions (Re: [PULL] http://linuxtv.org/hg/~awalls/cx18)
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: TT 3650
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- Re: Kconfig changes in /hg/v4l-dvb caused dvb_usb_cxusb to stop building
- From: VDR User <user.vdr@xxxxxxxxx>
- Re: [RFC] API changes for V4L2_MPEG_SLICED_VBI_FMT_IVTV definitions (Re: [PULL] http://linuxtv.org/hg/~awalls/cx18)
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: Problem with changeset 10837: causes "make all" not to build many modules
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~mkrufky/sms1xxx-gpio
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: Problem with changeset 10837: causes "make all" not to build many modules
- From: Alain Kalker <miki@xxxxxx>
- Is there any reference for v4l2-subdev?
- From: Dongsoo Nathaniel Kim <dongsoo.kim@xxxxxxxxx>
- Re: Lifeview FlyDVB Hybrid PCI (LR-306N): doesn't work anymore
- From: hermann pitton <hermann-pitton@xxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-notify
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: Kconfig changes in /hg/v4l-dvb caused dvb_usb_cxusb to stop building
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: Kconfig changes in /hg/v4l-dvb caused dvb_usb_cxusb to stop building
- From: VDR User <user.vdr@xxxxxxxxx>
- Re: OMAP3 ISP and camera drivers (update)
- From: "DongSoo(Nathaniel) Kim" <dongsoo.kim@xxxxxxxxx>
- Lifeview FlyDVB Hybrid PCI (LR-306N): doesn't work anymore
- From: Mario Chisari <mc-v4l@xxxxxxxxxxx>
- [Q]: about max symbol rate for DVB-S2
- From: Manu <eallaud@xxxxxxxxx>
- Lifeview FlyDVB Hybrid PCI (LR-306N): doesn't work anymore
- From: Mario Chisari <mc-v4l@xxxxxxxxxxx>
- [PULL] http://linuxtv.org/hg/~mkrufky/saa7134
- From: Michael Krufky <mkrufky@xxxxxxxxxxx>
- Re: [linux-dvb] frequency file update for dvb-t/ch-Citycable
- From: Christoph Pfister <christophpfister@xxxxxxxxx>
- Re: DVB-T MUX Frequency list for my city (it-Verona-Zevio)
- From: Christoph Pfister <christophpfister@xxxxxxxxx>
- [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-notify
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: get_dvb_firmware after first review
- From: Matthias Schwarzott <zzam@xxxxxxxxxx>
- [cron job] v4l-dvb daily build 2.6.22 and up: ERRORS, 2.6.16-2.6.21: ERRORS
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- get_dvb_firmware after first review
- Re: Kconfig changes in /hg/v4l-dvb caused dvb_usb_cxusb to stop building
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: Kconfig changes in /hg/v4l-dvb caused dvb_usb_cxusb to stop building
- From: VDR User <user.vdr@xxxxxxxxx>
- [PATCH] for the file libv4lconvert/mr97310a.c
- From: kilgota@xxxxxxxxxxxxxxxxxxxxxx
- Re: Kconfig changes in /hg/v4l-dvb caused dvb_usb_cxusb to stop building
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: Problem with changeset 10837: causes "make all" not to build many modules
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: TT 3650
- From: "Andreas Kurz" <kurz.andi@xxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~mkrufky/sms1xxx-gpio
- From: Michael Krufky <mkrufky@xxxxxxxxxxx>
- Re: Technisat Skystar 2 on Suse Linux 11.1, kernel 2.6.27.19-3.2-default
- From: Elmar Stellnberger <estellnb@xxxxxxxx>
- Re: Technisat Skystar 2 on Suse Linux 11.1, kernel 2.6.27.19-3.2-default
- From: Elmar Stellnberger <estellnb@xxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-wf
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Kconfig changes in /hg/v4l-dvb caused dvb_usb_cxusb to stop building
- From: Peter Baartz <baartzy@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~mkrufky/sms1xxx-gpio
- From: Uri Shkolnik <urishk@xxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Brandon Philips <brandon@xxxxxxxx>
- Re: Technisat Skystar 2 on Suse Linux 11.1, kernel 2.6.27.19-3.2-default
- From: Patrick Boettcher <patrick.boettcher@xxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dougsland/v4l-dvb
- From: hermann pitton <hermann-pitton@xxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dougsland/v4l-dvb
- From: Douglas Schilling Landgraf <dougsland@xxxxxxxxx>
- Re: [PATCH] zoran: Drop the lock_norm module parameter
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dougsland/v4l-dvb
- From: Devin Heitmueller <devin.heitmueller@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dougsland/v4l-dvb
- From: hermann pitton <hermann-pitton@xxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dougsland/v4l-dvb
- From: hermann pitton <hermann-pitton@xxxxxxxx>
- Re: [PATCH] pxa_camera: Redesign DMA handling
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dougsland/v4l-dvb
- From: Andy Walls <awalls@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dougsland/v4l-dvb
- From: Andy Walls <awalls@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~dougsland/v4l-dvb
- From: Devin Heitmueller <devin.heitmueller@xxxxxxxxx>
- Re: [PATCH] pxa_camera: Redesign DMA handling
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- [PULL] http://linuxtv.org/hg/~dougsland/v4l-dvb
- From: Douglas Schilling Landgraf <dougsland@xxxxxxxxx>
- Re: Technisat Skystar 2 on Suse Linux 11.1, kernel 2.6.27.19-3.2-default
- From: Elmar Stellnberger <estellnb@xxxxxxxx>
- Re: Results of the 'dropping support for kernels <2.6.22' poll
- From: Adam Baker <linux@xxxxxxxxxxxxxxxx>
- [PATCH] Conceptronic CTVFMI2 PCI Id
- From: Robert Millan <rmh@xxxxxxxxxxx>
- Re: Technisat Skystar 2 on Suse Linux 11.1, kernel 2.6.27.19-3.2-default
- From: Elmar Stellnberger <estellnb@xxxxxxxx>
- No success with Technisat Skystar HD2 PCI
- From: Bogdan Timofte <bogdan@xxxxxxxx>
- Re: Technisat Skystar 2 on Suse Linux 11.1, kernel 2.6.27.19-3.2-default
- From: Elmar Stellnberger <estellnb@xxxxxxxx>
- [cron job] v4l-dvb daily build 2.6.22 and up: ERRORS, 2.6.16-2.6.21: ERRORS
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: Technisat Skystar 2 on Suse Linux 11.1, kernel 2.6.27.19-3.2-default
- From: Patrick Boettcher <patrick.boettcher@xxxxxxx>
- Technisat Skystar 2 on Suse Linux 11.1, kernel 2.6.27.19-3.2-default
- From: Elmar Stellnberger <estellnb@xxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] for the file gspca/mr97310a.c (Resubmit)
- From: kilgota@xxxxxxxxxxxxxxxxxxxxxx
- Problem with changeset 10837: causes "make all" not to build many modules
- From: Alain Kalker <miki@xxxxxx>
- Re: [PATCH 4/5] OMAP3430SDP: Add support for Camera Kit v3
- From: Alexey Klimov <klimov.linux@xxxxxxxxx>
- Re: [PATCH 1/9] omap3isp: Add ISP main driver and register definitions
- From: Alexey Klimov <klimov.linux@xxxxxxxxx>
- [Q] bulk parameter settings
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [PATCH 9/9] omap34xxcam: Add camera driver
- From: Alexey Klimov <klimov.linux@xxxxxxxxx>
- [PATCH] saa6588: Prevent general protection fault on rmmod
- From: Jean Delvare <khali@xxxxxxxxxxxx>
- [PATCH] ir-kbd-i2c: Prevent general protection fault on rmmod
- From: Jean Delvare <khali@xxxxxxxxxxxx>
- [PATCH] em28xx: Prevent general protection fault on rmmod
- From: Jean Delvare <khali@xxxxxxxxxxxx>
- [PATCH] cx88: Prevent general protection fault on rmmod
- From: Jean Delvare <khali@xxxxxxxxxxxx>
- Re: [PULL] http://udev.netup.ru/hg/v4l-dvb-netup
- From: "Igor M. Liplianin" <liplianin@xxxxx>
- [PATCH] zoran: Don't frighten users with failed buffer allocation
- From: Jean Delvare <khali@xxxxxxxxxxxx>
- [PATCH] zoran: Drop the lock_norm module parameter
- From: Jean Delvare <khali@xxxxxxxxxxxx>
- Re: saa7134 and RDS
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: RFCv2: Finalizing the RDS interface
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: saa7134 and RDS
- From: Dmitri Belimov <d.belimov@xxxxxxxxx>
- Re: saa7134 and RDS
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [RFC] API changes for V4L2_MPEG_SLICED_VBI_FMT_IVTV definitions (Re: [PULL] http://linuxtv.org/hg/~awalls/cx18)
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Brandon Philips <brandon@xxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Greg KH <gregkh@xxxxxxx>
- Re: RFCv2: Finalizing the RDS interface
- From: "Hans J. Koch" <hjk@xxxxxxxxxxxxx>
- Re: saa7134 and RDS
- From: "Hans J. Koch" <hjk@xxxxxxxxxxxxx>
- Re: saa7134 and RDS
- From: "Hans J. Koch" <hjk@xxxxxxxxxxxxx>
- Re: Results of the 'dropping support for kernels <2.6.22' poll
- From: hermann pitton <hermann-pitton@xxxxxxxx>
- [RFC] API changes for V4L2_MPEG_SLICED_VBI_FMT_IVTV definitions (Re: [PULL] http://linuxtv.org/hg/~awalls/cx18)
- From: Andy Walls <awalls@xxxxxxxxx>
- Re: Results of the 'dropping support for kernels <2.6.22' poll
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [PULL] http://udev.netup.ru/hg/v4l-dvb-netup
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: [PATCH -next] dvb/frontends: fix duplicate 'debug' symbol
- From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
- Re: Results of the 'dropping support for kernels <2.6.22' poll
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: [PATCH -next] dvb/frontends: fix duplicate 'debug' symbol
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- [PULL] http://udev.netup.ru/hg/v4l-dvb-netup
- From: "Igor M. Liplianin" <liplianin@xxxxx>
- [PULL] http://udev.netup.ru/hg/v4l-dvb-netup
- From: "Igor M. Liplianin" <liplianin@xxxxxx>
- Re: [PATCH 1/4] pxa_camera: Remove YUV planar formats hole
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: [PATCH 1/4] pxa_camera: Remove YUV planar formats hole
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH 1/4] pxa_camera: Remove YUV planar formats hole
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- CAM support for Terratec Cinergy C PCI HD CI
- From: Marc Schmitt <marc.schmitt@xxxxxxxxx>
- Re: [Fwd: Re: Topro 6800 driver]
- From: Thomas Kaiser <v4l@xxxxxxxxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- [Fwd: Re: Topro 6800 driver]
- From: Thomas Kaiser <v4l@xxxxxxxxxxxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- [PATCH -next] dvb/frontends: fix duplicate 'debug' symbol
- From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
- Re: [PATCH] for the file gspca/mr97310a.c (revisions)
- From: kilgota@xxxxxxxxxxxxxxxxxxxxxx
- pxa_camera and test bed
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Not able to view HD-TV via Technisat Skystar HD 2
- From: Hartmut <spieluhr@xxxxxxxxxx>
- S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Brandon Philips <brandon@xxxxxxxx>
- Re: [PATCH 1/4] pxa_camera: Remove YUV planar formats hole
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- [cron job] ERRORS: armv5 armv5-ixp armv5-omap2 i686 m32r mips powerpc64 x86_64 v4l-dvb build
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: V4L2 spec
- From: wk <handygewinnspiel@xxxxxx>
- Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-hm12
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-hm12
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: TT S2-3200 and CAMs
- From: Lou Otway <lotway@xxxxxxxxxxxxx>
- Problems with Hauppauge CX88 based DVB-T cards
- From: Lou Otway <lotway@xxxxxxxxxxxxx>
- OMAP3 ISP and camera drivers (update)
- From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-vino
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~awalls/cx18
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- V4L2 spec
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH 1/4] pxa_camera: Remove YUV planar formats hole
- From: robert.jarzmik@xxxxxxx
- [PULL] http://linuxtv.org/hg/~mkrufky/sms1xxx-gpio
- From: Michael Krufky <mkrufky@xxxxxxxxxxx>
- Re: [linuxtv-commits] [hg:v4l-dvb] Kconfig: replace DVB_FE_CUSTOMIZE to DVB_FE_CUSTOMISE
- From: Andreas Oberritter <obi@xxxxxxxxxxx>
- Re: [PATCH 3/9] omap3isp: Add userspace header
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- RFCv2: Finalizing the RDS interface
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Lifeview FlyDVB Hybrid PCI (LR-306N): doesn't work anymore
- From: Mario Chisari <mc-v4l@xxxxxxxxxxx>
- Re: About the radio-si470x driver for I2C interface
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: [PATCH 1/4] pxa_camera: Remove YUV planar formats hole
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- [PATCH] mt9t031 bugfix
- From: Philippe Rétornaz <philippe.retornaz@xxxxxxx>
- Re: [PATCH 1/4] pxa_camera: Remove YUV planar formats hole
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: [PATCH 1/4] pxa_camera: Remove YUV planar formats hole
- From: robert.jarzmik@xxxxxxx
- Re: [PATCH] for the file gspca/mr97310a.c
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH] for the file gspca/mr97310a.c
- From: kilgota@xxxxxxxxxxxxxxxxxxxxxx
- RE: Embedded Linux Conference
- From: "Hadli, Manjunath" <mrh@xxxxxx>
- Re: [PATCH] for the file gspca/mr97310a.c
- From: Kyle Guinn <elyk03@xxxxxxxxx>
- Re: Embedded Linux Conference
- From: "DongSoo(Nathaniel) Kim" <dongsoo.kim@xxxxxxxxx>
- [PULL] http://linuxtv.org/hg/~awalls/v4l-dvb
- From: Andy Walls <awalls@xxxxxxxxx>
- Re: [PULL] http://linuxtv.org/hg/~awalls/cx18
- From: Andy Walls <awalls@xxxxxxxxx>
- Re: [PATCH] cx88: Add IR support to pcHDTV HD3000 & HD5500
- From: "Erik S. Beiser" <erikb@xxxxxx>
- About the radio-si470x driver for I2C interface
- From: Joonyoung Shim <dofmind@xxxxxxxxx>
- [PATCH] for the file gspca/mr97310a.c
- From: kilgota@xxxxxxxxxxxxxxxxxxxxxx
- Re: [PATCH 4/5] OMAP3430SDP: Add support for Camera Kit v3
- From: "DongSoo(Nathaniel) Kim" <dongsoo.kim@xxxxxxxxx>
- Fw: oops in pwc_reset_buffers
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- Re: RFC on proposed patches to mr97310a.c for gspca and v4l
- From: kilgota@xxxxxxxxxxxxxxxxxxxxxx
- Re: RFC on proposed patches to mr97310a.c for gspca and v4l
- From: Kyle Guinn <elyk03@xxxxxxxxx>
- Re: [linux-dvb] (no subject) - in fact Amiga OS4 and v4l-dvb
- From: hermann pitton <hermann-pitton@xxxxxxxx>
- RE: [PATCH 4/5] OMAP3430SDP: Add support for Camera Kit v3
- From: "Curran, Dominic" <dcurran@xxxxxx>
- Re: Results of the 'dropping support for kernels <2.6.22' poll
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [PATCH 1/4] pxa_camera: Remove YUV planar formats hole
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [PATCH 4/5] OMAP3430SDP: Add support for Camera Kit v3
- From: Alexey Klimov <klimov.linux@xxxxxxxxx>
- Re: Results of the 'dropping support for kernels <2.6.22' poll
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [REVIEW PATCH 11/14] OMAP34XXCAM: Add driver
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH 1/4] pxa_camera: Remove YUV planar formats hole
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Is v4l2 loopback needed in kernel? Invitation for code review
- Re: [PATCH 1/4] pxa_camera: Remove YUV planar formats hole
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: Results of the 'dropping support for kernels <2.6.22' poll
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: RFC on proposed patches to mr97310a.c for gspca and v4l
- From: Thomas Kaiser <v4l@xxxxxxxxxxxxxxx>
- Re: [PATCH] Fix race in infrared polling on rmmod
- From: Jean Delvare <khali@xxxxxxxxxxxx>
- Re: RFC on proposed patches to mr97310a.c for gspca and v4l
- From: kilgota@xxxxxxxxxxxxxxxxxxxxxx
- Re: RFC on proposed patches to mr97310a.c for gspca and v4l
- From: kilgota@xxxxxxxxxxxxxxxxxxxxxx
- Re: Hauppauge NOVA-T 500 falls over after warm reboot
- From: Eduard Huguet <eduardhc@xxxxxxxxx>
- Re: RFC on proposed patches to mr97310a.c for gspca and v4l
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
- From: Henrik Beckman <henrik.list@xxxxxxxxx>
- Re: Results of the 'dropping support for kernels <2.6.22' poll
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: RFC on proposed patches to mr97310a.c for gspca and v4l
- From: kilgota@xxxxxxxxxxxxxxxxxxxxxx
- Re: RFC on proposed patches to mr97310a.c for gspca and v4l
- From: Thomas Kaiser <v4l@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] pxa_camera: Remove YUV planar formats hole
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: Results of the 'dropping support for kernels <2.6.22' poll
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: [REVIEW PATCH 11/14] OMAP34XXCAM: Add driver
- From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: Hauppauge NOVA-T 500 falls over after warm reboot
- From: utar <utar101@xxxxxxxxx>
- [PATCH 4/4] pxa_camera: Fix overrun condition on last buffer
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH 3/4] pxa_camera: Coding style sweeping
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH 2/4] pxa_camera: Redesign DMA handling
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH 1/4] pxa_camera: Remove YUV planar formats hole
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH 0/4] pxa_camera: Redesign DMA handling
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: RFC on proposed patches to mr97310a.c for gspca and v4l
- From: kilgota@xxxxxxxxxxxxxxxxxxxxxx
- Re: RFC on proposed patches to mr97310a.c for gspca and v4l
- From: Thomas Kaiser <v4l@xxxxxxxxxxxxxxx>
- [cron job] ERRORS: armv5 armv5-ixp armv5-omap2 i686 m32r mips powerpc64 x86_64 v4l-dvb build
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: RFC on proposed patches to mr97310a.c for gspca and v4l
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: RFC on proposed patches to mr97310a.c for gspca and v4l
- From: kilgota@xxxxxxxxxxxxxxxxxxxxxx
- Re: Results of the 'dropping support for kernels <2.6.22' poll
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [PATCH] firedtv: fix printk format mismatch
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
- Re: RFC on proposed patches to mr97310a.c for gspca and v4l
- From: kilgota@xxxxxxxxxxxxxxxxxxxxxx
- [PATCH] firedtv: fix printk format mismatch
- From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
- Symbol rate limit for TT 3200
- From: Manu <eallaud@xxxxxxxxx>
- Symbol rate limit for TT 3200
- From: Manu <eallaud@xxxxxxxxx>
- Re: [PATCH] Fix race in infrared polling on rmmod
- From: Devin Heitmueller <devin.heitmueller@xxxxxxxxx>
- Embedded Linux Conference
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- RE: [PATCH 4/5] OMAP3430SDP: Add support for Camera Kit v3
- From: "Curran, Dominic" <dcurran@xxxxxx>
- Re: saa7134 and RDS
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- scan file for au-SunshineCoast
- From: Christoph Pfister <christophpfister@xxxxxxxxx>
- [PATCH] omap34xxcam: Don't use dev_err before we have a video device
- From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 9/9] omap34xxcam: Add camera driver
- From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] cx88: Prevent general protection fault on rmmod
- From: Jean Delvare <khali@xxxxxxxxxxxx>
- Re: RFC on proposed patches to mr97310a.c for gspca and v4l
- From: Thomas Kaiser <v4l@xxxxxxxxxxxxxxx>
- Re: saa7134 and RDS
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: saa7134 and RDS
- From: Dmitri Belimov <d.belimov@xxxxxxxxx>
- Re: [PATCH 1/9] omap3isp: Add ISP main driver and register definitions
- From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [linux-dvb] ERROR: Module dvb_usb_aaa_dvbusb_demo is in use
- From: Patrick Boettcher <patrick.boettcher@xxxxxxx>
- [PULL] http://linuxtv.org/hg/~tap/v4l-dvb
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: [PATCH] cx88: Prevent general protection fault on rmmod
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- [PATCH] Fix race in infrared polling on rmmod
- From: Jean Delvare <khali@xxxxxxxxxxxx>
- [PATCH] cx88: Prevent general protection fault on rmmod
- From: Jean Delvare <khali@xxxxxxxxxxxx>
- Re: identifying camera sensor
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: identifying camera sensor
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: identifying camera sensor
- From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
- Re: identifying camera sensor
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: identifying camera sensor
- From: "Tuukka.O Toivonen" <tuukka.o.toivonen@xxxxxxxxx>
- Re: [REVIEW PATCH 11/14] OMAP34XXCAM: Add driver
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [RFC 0/9] OMAP3 ISP and camera drivers
- From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: RFC on proposed patches to mr97310a.c for gspca and v4l
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: RFC on proposed patches to mr97310a.c for gspca and v4l
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
[Index of Archives]
[Gstreamer Embedded]
[Linux USB Development]
[Video for Linux]
[Linux SCSI]
[Yosemite News]