Hi > > > Did you setup the /etc/rdsd.conf file correctly? > > > > > > Here is mine: > > > > > > $ cat /etc/rdsd.conf > > > [global] > > > unix-socket = "/var/tmp/rdsd.sock" > > > tcpip-port = 4321 > > > logfile = "/var/tmp/rdsd.log" > > > pidfile = "/var/tmp/rdsd.pid" > > > console-log = yes > > > file-log = yes > > > loglevel = 5 > > > > > > [source] > > > name = "Terratec PCI card" > > > path = "/dev/radio0" > > > type = "radiodev" > > > > I had tunerfreq = 102000 line. After removing this line rdsd started > > well. > > > > > After setting up this file I run 'rdsd'. > > > With rdsquery -f you can set the frequency in khz. > > > > When run rdsquery -f 102000 the programm was hold without any > > messages. I pressed Crt+C for exit. > > Try using v4l2-ctl -d /dev/radio0 -f 102 to set the frequency. That > may have been what I was actually using rather than rdsquery. This command works right. > > > > > Then run > > > > > > rdsquery -t \ > > > rxfre,rxsig,rflags,picode,ptype,pname,locdt,utcdt,rtxt,lrtxt,tmc,aflist > > > -c0 > > > > This command not work too, hold and sleep. > > If the frequency wasn't set, then that might explain it. Or perhaps > you should combine the -f with the -t flag? Out from rdsquery rxfre:102000 rxsig:32768 rflags:TP=0 TA=0 MUSIC=0 STEREO=0 AH=0 COMP=0 DPTY=0 AB=0 picode:20480 ptype:5 rflags:TP=0 TA=0 MUSIC=0 STEREO=0 AH=0 COMP=0 DPTY=0 AB=1 picode:20480 ptype:5 rtxt: io T 020 rflags:TP=0 TA=0 MUSIC=0 STEREO=0 AH=0 COMP=0 DPTY=0 AB=1 picode:20480 ptype:5 rtxt: io T 020 2004 rflags:TP=0 TA=0 MUSIC=0 STEREO=0 AH=0 COMP=0 DPTY=0 AB=1 picode:20480 ptype:5 rtxt: io T 020 2004 roni rflags:TP=0 TA=0 MUSIC=0 STEREO=0 AH=0 COMP=0 DPTY=0 AB=0 picode:20480 ptype:5 rflags:TP=0 TA=0 MUSIC=0 STEREO=0 AH=0 COMP=0 DPTY=0 AB=0 picode:20480 ptype:5 rflags:TP=0 TA=0 MUSIC=0 STEREO=0 AH=0 COMP=0 DPTY=0 AB=0 picode:20480 ptype:5 pname:STN + rxfre:102000 rxsig:32768 rflags:TP=0 TA=0 MUSIC=0 STEREO=0 AH=0 COMP=0 DPTY=0 AB=0 picode:20480 ptype:5 rtxt: Rad rflags:TP=0 TA=0 MUSIC=0 STEREO=0 AH=0 COMP=0 DPTY=0 AB=0 picode:20480 ptype:5 rtxt:TRDS Rad With my best regards, Dmitry. > You can also attempt to debug in the saa6588 to see whether it picks > up any packets. > > Regards, > > Hans > > > > > With my best regards, Dmitry. > > > > > and watch the rds data appear. > > > > > > Regards, > > > > > > Hans > > > > > > -- > > > Hans Verkuil - video4linux developer - sponsored by TANDBERG > > > > -- > Hans Verkuil - video4linux developer - sponsored by TANDBERG -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
