On Tuesday 10 March 2009 03:49:57 Dmitri Belimov wrote: > Hi > > > On Saturday 07 March 2009 10:02:24 Dmitri Belimov wrote: > > > Hi > > > > > > I build rdsd. But can't start. See log: > > > > > > Fri Mar 6 03:44:20 2009 RDS handler initialized. > > > Fri Mar 6 03:44:20 2009 Added source definition: Beholder M6 Exra > > > Fri Mar 6 03:44:20 2009 RDS sources setup OK. > > > Fri Mar 6 03:44:20 2009 Unix domain socket created and listening. > > > Fri Mar 6 03:44:20 2009 TCP/IP socket created and listening. > > > Fri Mar 6 03:44:20 2009 Using V4L2 for Beholder M6 Exra > > > Fri Mar 6 03:44:20 2009 open_sources() failed. > > > Fri Mar 6 03:44:20 2009 rdsd terminating with error code 13 > > > > > > With my best regards, Dmitry. > > > > Did you setup the /etc/rdsd.conf file correctly? > > > > Here is mine: > > > > $ cat /etc/rdsd.conf > > [global] > > unix-socket = "/var/tmp/rdsd.sock" > > tcpip-port = 4321 > > logfile = "/var/tmp/rdsd.log" > > pidfile = "/var/tmp/rdsd.pid" > > console-log = yes > > file-log = yes > > loglevel = 5 > > > > [source] > > name = "Terratec PCI card" > > path = "/dev/radio0" > > type = "radiodev" > > I had tunerfreq = 102000 line. After removing this line rdsd started > well. > > > After setting up this file I run 'rdsd'. > > With rdsquery -f you can set the frequency in khz. > > When run rdsquery -f 102000 the programm was hold without any messages. > I pressed Crt+C for exit. Try using v4l2-ctl -d /dev/radio0 -f 102 to set the frequency. That may have been what I was actually using rather than rdsquery. > > > Then run > > > > rdsquery -t \ > > rxfre,rxsig,rflags,picode,ptype,pname,locdt,utcdt,rtxt,lrtxt,tmc,aflist > > -c0 > > This command not work too, hold and sleep. If the frequency wasn't set, then that might explain it. Or perhaps you should combine the -f with the -t flag? You can also attempt to debug in the saa6588 to see whether it picks up any packets. Regards, Hans > > With my best regards, Dmitry. > > > and watch the rds data appear. > > > > Regards, > > > > Hans > > > > -- > > Hans Verkuil - video4linux developer - sponsored by TANDBERG -- Hans Verkuil - video4linux developer - sponsored by TANDBERG -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
