> since 3 days I have a Technisat Skystar HD 2 in my Computer (PCI-card) > > was my mail some days ago. My fault: I installed the multiproto-driver, > cause I read this: > > > Mantis/S2API driver > > > > This is the preferred driver. DVB-S2 support in the Linux kernel is provided by API version 5.0, also known as S2API (and not multiproto). This API was released in kernel version 2.6.28 please try http://mercurial.intuxication.org/hg/s2-liplianin s2api drivers > So I thought, I can only use this driver, if I use a kernel 2.6.28 which > I do not and so I installed the multiproto-driver with part-success. But > I read further and further and found out, that I was wrong. So yesterday > I installed the S2API-driver with some more success. Channel-switching > is very fast now and scan-s2 finds the hd-channels. I can even zap to a > hd-channel, but viewing is the problem: > > szap-output to a "normal" channel: > > szap-s2 -a 0 -H -r -S 0 -n 373 > zapping to 373 'NDR FS NDS;ARD': > delivery DVB-S, modulation QPSK > sat 0, frequency 12109 MHz H, symbolrate 27500000, coderate 3/4, rolloff > 0.35 > vpid 0x0a29, apid 0x0a2a, sid 0x0a2c > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > status 1f | signal 0% | snr 0% | ber 0 | unc -2 | FE_HAS_LOCK > status 1f | signal 0% | snr 0% | ber 0 | unc -2 | FE_HAS_LOCK > (and so on) > > mplayer-output for this channel: please try to use another demuxer with mplayer from svn mplayer -demuxer lavf > > VDecoder init failed :( > Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
