CAM support for Terratec Cinergy C PCI HD CI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,

I just bought a
http://www.terratec.net/en/products/Cinergy_C_PCI_HD_CI_1612.html
which reports as follows under Linux:

00:0f.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV
PCI Bridge Controller [Ver 1.0] (rev 01)
	Subsystem: TERRATEC Electronic GmbH Device 1178
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min, 63750ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at eb408000 (32-bit, prefetchable) [size=4K]
	Kernel driver in use: Mantis
	Kernel modules: mantis

[   16.741186] Mantis 0000:00:0f.0: PCI INT A -> Link[LNKB] -> GSI 5
(level, low) -> IRQ 5
[   16.741228] irq: 5, latency: 32
[   16.741230]  memory: 0xeb408000, mmio: 0xe0852000
[   16.741237] found a VP-2040 PCI DVB-C device on (00:0f.0),
[   16.741241]     Mantis Rev 1 [153b:1178], irq: 5, latency: 32
[   16.741247]     memory: 0xeb408000, mmio: 0xe0852000
[   16.744411]     MAC Address=[00:08:ca:1d:bc:ae]
[   16.744535] mantis_alloc_buffers (0): DMA=0x1eab0000 cpu=0xdeab0000
size=65536
[   16.744551] mantis_alloc_buffers (0): RISC=0x1eb86000
cpu=0xdeb86000 size=1000
[   16.744559] DVB: registering new adapter (Mantis dvb adapter)
[   17.264189] mantis_frontend_init (0): Probing for CU1216 (DVB-C)
[   17.267687] TDA10023: i2c-addr = 0x0c, id = 0x7d
[   17.267695] mantis_frontend_init (0): found Philips CU1216 DVB-C
frontend (TDA10023) @ 0x0c
[   17.267702] mantis_frontend_init (0): Mantis DVB-C Philips CU1216
frontend attach success
[   17.267712] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
[   17.268183] mantis_ca_init (0): Registering EN50221 device
[   17.319032] mantis_ca_init (0): Registered EN50221 device
[   17.319055] mantis_hif_init (0): Adapter(0) Initializing Mantis
Host Interface

I could not find any posts indicating that CAM support for this card
has been implemented yet and a `gnutv -cammenu` just hangs forever.
The CAM is a Conax 4.00e, btw.

I'm wondering if there is someone working on implementing this and if
I could help somehow by donating such a card to a developer? Would
that help? Please let me know.

Thanks,
    Marc
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux