Hi Elmar,
On Sat, 7 Mar 2009, Elmar Stellnberger wrote:
dvbscan -adapter 0 -frontend 0 -demux 0 /usr/share/dvb/dvb-s/Astra-19.2E
Failed to set frontend
I have the same problem with that scan, please use the older one called
scan.
Are you running the szap below as root, but kaffeine as a normal user ?
If so, make sure that you are in the group video.
downloading channel.conf from Astra1
has not brought me force.
szap 3sat
reading channels from file '/home/elm/.szap/channels.conf'
zapping to 20 '3sat':
sat 0, frequency = 11954 MHz V, symbolrate 27500000, vpid = 0x00d2, apid
= 0x00dc sid = 0x0000
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal 0000 | snr 6b2b | ber 00000000 | unc fffffffe |
status 00 | signal 0000 | snr 7f02 | ber 00007e00 | unc fffffffe |
status 01 | signal aa7e | snr 3d47 | ber 0000ffe8 | unc fffffffe |
status 00 | signal 0000 | snr 7fc5 | ber 0000fff0 | unc fffffffe |
status 00 | signal 0000 | snr 2232 | ber 00006ef0 | unc fffffffe |
status 00 | signal 0000 | snr 1fdd | ber 00000058 | unc fffffffe |
status 00 | signal 0000 | snr 19b3 | ber 00000000 | unc fffffffe |
status 02 | signal 0000 | snr 192f | ber 00000000 | unc fffffffe |
status 00 | signal 0035 | snr 8469 | ber 00000000 | unc fffffffe |
This is the first proof that your device is present and the driver is
correctly loaded. Please check the output of the dmesg-program to check
for lines starting with b2c2-flexcop.
what should that output mean?
it means, it can't synchronize the channel on that frequency. This can
have a whole bunch of explaination - not necessarily only the driver.
why does szap not terminate?
It stays in the monitoring loop. Normal.
Patrick.
--
Mail: patrick.boettcher@xxxxxxx
WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
