Linux USB Users

• Thread Index

• Re: [PATCH 03/15] pcmcia: move Vpp setup to struct pcmcia_device
  • From: "Gustavo F. Padovan" <padovan@xxxxxxxxxxxxxx>
• Re: [PATCH 07/15] pcmcia: move config_{base,index,regs} to struct pcmcia_device
  • From: "Gustavo F. Padovan" <padovan@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] usbutils fixes for USB 3.0 devices
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH 0/4] usbutils fixes for USB 3.0 devices
  • From: John Youn <John.Youn@xxxxxxxxxxxx>
• Re: [RFC] GADGET : allow to build multi udc
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: [RFC] GADGET : allow to build multi udc
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• [PATCH] g_file_storage: don't generate automatic serial string
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: power off devices at shutdown
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: suspend_delay implementation
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] GADGET : allow to build multi udc
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Resetting USB HC .. During kernel boot
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Crash on reducing the kernel mem.
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH 10/15] pcmcia: introduce autoconfiguration feature
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 07/15] pcmcia: move config_{base,index,regs} to struct pcmcia_device
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 12/15] pcmcia: remove the "Finally, report what we've done" message
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 11/15] pcmcia: use autoconfiguration feature for ioports and iomem
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 08/15] pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 03/15] pcmcia: move Vpp setup to struct pcmcia_device
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 06/15] pcmcia: simplify IntType
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 8/8 v2] usb : musb: Using runtime pm apis for musb.
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH] HID: add no-get quirk for eGalax touch controller
  • From: Jiri Kosina <jkosina@xxxxxxx>
• RE: [PATCH 6/8 v2] usb: musb: Offmode fix for idle path
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [ANN] HID dumping tool
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• Crash on reducing the kernel mem.
  • From: Prabhu Chawandi <prabhu.chavandi@xxxxxxxxx>
• Re: [RFC] GADGET : allow to build multi udc
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: Resetting USB HC .. During kernel boot
  • From: Prabhu Chawandi <prabhu.chavandi@xxxxxxxxx>
• Re: "bInterval" value for High Speed BULK out endpoint
  • From: Mohan V <mohanv@xxxxxx>
• Re: [PATCH] USB: ftdi_sio: Added custom PIDs for ChamSys products
  • From: Andreas Mohr <andi@xxxxxxxx>
• Re: [RFC] GADGET : allow to build multi udc
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] USB: usbtest - Add tests to ensure HCDs can accept byte aligned buffers.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [RFC] GADGET : allow to build multi udc
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: suspend_delay implementation
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• USB device can't remote wakeup Linux host
  • From: "ljma" <ljma@xxxxxxxxxxxxxxxx>
• Re: suspend_delay implementation
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH] USB: otg: twl4030: fix phy initialization
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: suspend_delay implementation
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 00/13] USB patches (take two)
  • From: Alan Cox <alan@xxxxxxxxxxxxxxx>
• suspend_delay implementation
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/8] : Hwmod api changes
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] HID: add no-get quirk for eGalax touch controller
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] GADGET : allow to build multi udc
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] USB: output an error message when the pipe type doesn't match the endpoint type
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [ANN] HID dumping tool
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] USB: otg: twl4030: fix phy initialization
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [RFC] GADGET : allow to build multi udc
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] USB: output an error message when the pipe type doesn't match the endpoint type
  • From: Simon Arlott <simon@xxxxxxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH] USB: otg: twl4030: fix phy initialization
  • From: tom.leiming@xxxxxxxxx
• Re: [PATCH v4 0/2] Get and Set Feature Reports on HIDRAW (USB and Bluetooth)
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: Resetting USB HC .. During kernel boot
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: output an error message when the pipe type doesn't match the endpoint type
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [RFC] GADGET : allow to build multi udc
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Resetting USB HC .. During kernel boot
  • From: Prabhu Chawandi <prabhu.chavandi@xxxxxxxxx>
• Re: [PATCH] USB: output an error message when the pipe type doesn't match the endpoint type
  • From: "Simon Arlott" <simon@xxxxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [PATCH] USB: ftdi_sio: Added custom PIDs for ChamSys products
  • From: Luke Lowrey <luke@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [PATCH v2] USB: cdc-acm: Fixing crash when ACM probing interfaces with no endpoint descriptors.
  • From: Toby Gray <toby.gray@xxxxxxxxxxx>
• Re: [PATCH] USB: usbtest - Add tests to ensure HCDs can accept byte aligned buffers.
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• Re: [PATCH] usb: power off devices at shutdown
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH/RFC] HID: rdesc parser: remove local item size limit
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [ANN] HID dumping tool
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• Re: [PATCH] USB: usbtest - Add tests to ensure HCDs can accept byte aligned buffers.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: endianess patch
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 0/4] usbutils fixes for USB 3.0 devices
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [ANN] HID dumping tool
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] fix building on non-Linux systems (e.g. BSD)
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usbutils.pc: use datarootdir
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Question about Protocol code in f_acm.c
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: Question about Protocol code in f_acm.c
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: [PATCHv8 03/13] USB: gadget: composite: Better string override handling
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: [PATCH] USB: usbtest - Add tests to ensure HCDs can accept byte aligned buffers.
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH v2 3/4] usbutils: Print MaxStreams and Mult for USB 3.0 devices.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] usbutils: Print MaxStreams and Mult for USB 3.0 devices.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Question about Protocol code in f_acm.c
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCHv8 03/13] USB: gadget: composite: Better string override handling
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCHv8 03/13] USB: gadget: composite: Better string override handling
  • From: Greg KH <greg@xxxxxxxxx>
• Question about Protocol code in f_acm.c
  • From: Praveena NADAHALLY <praveen.nadahally@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] usbutils: Print MaxStreams and Mult for USB 3.0 devices.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/4] usbutils: Fix Wireless USB descriptor fetching.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 4/4] usbutils: Print Binary Object Store descriptor.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 3/4] usbutils: Print MaxStreams and Mult for USB 3.0 devices.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 2/4] usbutils: Support USB 3.0 hub descriptor output.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 0/4] usbutils fixes for USB 3.0 devices
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• patch "USB Gadget: Verify VBUS current before setting the device self-powered bit" added to gregkh-2.6 tree
  • From: <gregkh@xxxxxxx>
• Re: USB: ehci: Support for Intel Moorestown MPH and OTG host
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 00/13] USB patches (take two)
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/5] USB: Add MSM USB Device Controller driver
  • From: Brian Swetland <swetland@xxxxxxxxxx>
• Re: [PATCH] USB: output an error message when the pipe type doesn't match the endpoint type
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• Re: [PATCH] USB: output an error message when the pipe type doesn't match the endpoint type
  • From: Simon Arlott <simon@xxxxxxxxxxx>
• Re: [PATCH] Adding second ACM channel support for various Nokia and one Samsung phones
  • From: Toby Gray <toby.gray@xxxxxxxxxxx>
• [PATCH 2/2] usb: serial: mos7840: Add USB IDs to support more B&B USB/RS485 converters.
  • From: Dave Ludlow <dave.ludlow@xxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] USB: Add MSM USB Device Controller driver
  • From: pkondeti@xxxxxxxxxxxxxx
• Re: [PATCH] Fixing crash when ACM probing interfaces with no endpoint descriptors.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Fixing crash when ACM probing interfaces with no endpoint descriptors.
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH] Fixing crash when ACM probing interfaces with no endpoint descriptors.
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH] Fixing crash when ACM probing interfaces with no endpoint descriptors.
  • From: Toby Gray <toby.gray@xxxxxxxxxxx>
• [PATCH] Fixing crash when ACM probing interfaces with no endpoint descriptors.
  • From: Toby Gray <toby.gray@xxxxxxxxxxx>
• Re: [PATCH] Adding second ACM channel support for various Nokia and one Samsung phones
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [PATCH] Adding second ACM channel support for various Nokia and one Samsung phones
  • From: Toby Gray <toby.gray@xxxxxxxxxxx>
• Re: [PATCH 1/5] USB: Add MSM USB Device Controller driver
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: "bInterval" value for High Speed BULK out endpoint
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] USB: Add MSM USB Device Controller driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH] USB:gadget:introduce isochronous source sink function driver(V1)
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: David Vrabel <david.vrabel@xxxxxxx>
• FTDI one-way device issue
  • From: Orjan Friberg <of@xxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• Re: [PATCH] HID: waltop: fixes and more models supported
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH] HID: waltop: fixes and more models supported
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH] HID: waltop: fixes and more models supported
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH] HID: waltop: fixes and more models supported
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• "bInterval" value for High Speed BULK out endpoint
  • From: Mohan V <mohanv@xxxxxx>
• Re: [PATCH] HID: waltop: fixes and more models supported
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 2/7] drivers/usb/gadget/amd5536udc.c: Remove double test
  • From: Thomas Dahlmann <dahlmann.thomas@xxxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: David Vrabel <david.vrabel@xxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: David Vrabel <david.vrabel@xxxxxxx>
• [PATCH 4/5] USB: msm72k_udc: Add Test Mode support
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• [PATCH 5/5] USB: msm72k_udc: Add charging notification support
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• [PATCH 3/5] USB: msm72k_udc: Add Remote wakeup support
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• [PATCH 2/5] USB: msm72k_udc: Add debugfs support
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• [PATCH 1/5] USB: Add MSM USB Device Controller driver
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• [PATCH 0/5] Add MSM USB Device Controller support
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Artem Makhutov <artem@xxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 17/74] ST SPEAr: Adding USB Host support
  • From: viresh kumar <viresh.kumar@xxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH] usb: serial: mos7840: Add USB ID to support the B&B Electronics USOPTL4-2P.
  • From: Dave Ludlow <dave.ludlow@xxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• [PATCH] Add pseudo modem without AT command capabilities
  • From: Philippe Corbes <philippe.corbes@xxxxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• RE: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH 8/8 v2] usb : musb: Using runtime pm apis for musb.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/8 v2] usb: musb: Offmode fix for idle path
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH] USB: output an error message when the pipe type doesn't match the endpoint type
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: output an error message when the pipe type doesn't match the endpoint type
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH] USB: output an error message when the pipe type doesn't match the endpoint type
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH] USB: output an error message when the pipe type doesn't match the endpoint type
  • From: "Simon Arlott" <simon@xxxxxxxxxxx>
• [PATCH 4/4 v6 RESEND] xHCI: PCI power management implementation
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 3/4 v6 RESEND] xHCI: bus power management implementation
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 1/4 v6 RESEND] xHCI: port power management implementation
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 2/4 v6 RESEND] xHCI: port remote wakeup implementation
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• RE: [PATCH 7/8 v2] OMAP: Hwmod api changes
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• RE: [PATCH 8/8 v2] usb : musb: Using runtime pm apis for musb.
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• [PATCH 3/3 v2 RESEND] usbcore: use kernel assigned address for devices under xHCI
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 2/3 v2 RESEND] xHCI: change xhci_reset_device() to allocate new device
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 1/3 v2 RESEND] xHCI: Add pointer to udev in struct xhci_virt_device
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [BUG] 2.6.31.2 io_ti
  • From: Chris Beauchamp <chris@xxxxxxxxxxxxx>
• Re: [PATCH] Add pseudo modem without AT command capabilities
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH] USB: output an error message when the pipe type doesn't match the endpoint type
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• RE: [PATCH 6/8 v2] usb: musb: Offmode fix for idle path
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• RE: [PATCH 0/8 v2]usb: musb: hwmod and runtime pm support for musb
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• RE: [PATCH 0/8 v2]usb: musb: hwmod and runtime pm support for musb
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [RFC/PATCH] USB:gadget:introduce isochronous source sink function driver(V1)
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: gs_start_io() and gs_close()
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Regarding USB-Serial Device driver
  • From: Greg KH <gregkh@xxxxxxx>
• Re: gs_start_io() and gs_close()
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: gs_start_io() and gs_close()
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: gs_start_io() and gs_close()
  • From: Jim Sung <jsung@xxxxxxxxxxxxxx>
• Re: gs_start_io() and gs_close()
  • From: Jim Sung <jsung@xxxxxxxxxxxxxx>
• Re: [PATCH] Add pseudo modem without AT command capabilities
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] USB: output an error message when the pipe type doesn't match the endpoint type
  • From: Simon Arlott <simon@xxxxxxxxxxx>
• Re: cxacru usb_bulk_msg() firmware upload 36x slower with OHCI vs. UHCI
  • From: Simon Arlott <simon@xxxxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] Add pseudo modem without AT command capabilities
  • From: Philippe Corbes <philippe.corbes@xxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] USB: imx21-hcd - indicate DMA alignement requirement.
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• [PATCH 1/2] USB: Allow HCDs to specifiy their DMA alignment requirements
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• [PATCH 0/2] Support HCDs with DMA alignment requirements
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• [PATCH] USB: usbtest - Add tests to ensure HCDs can accept byte aligned buffers.
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [RFC/PATCH] USB:gadget:introduce isochronous source sink function driver(V1)
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] usb: power off devices at shutdown
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH] USB:gadget:introduce isochronous source sink function driver(V1)
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: musb: fix kernel panic if using out ep with FIFO_TXRX style(v1)
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/2] USB: musb: fix kernel panic if using out ep with FIFO_TXRX style(v1)
  • From: Greg KH <greg@xxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] s3c2410_udc: Add handling for S3C244X dual-packet mode
  • From: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 17/74] ST SPEAr: Adding USB Host support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usbhid: Add quirk for eGalax touch controler.
  • From: Jiri Kosina <jkosina@xxxxxxx>
• [PATCH 17/74] ST SPEAr: Adding USB Host support
  • From: Viresh KUMAR <viresh.kumar@xxxxxx>
• [PATCH] usbhid: Add quirk for eGalax touch controler.
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• RE: [PATCH 3/3 v2] usbcore: use kernel assigned address for devices under xHCI
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• [PATCH 4/4] HID: waltop: comment on tablet modes
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• [PATCH 2/4] HID: waltop: add Media Tablet 14.1 inch support
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• [PATCH 3/4] HID: waltop: fix Media Tablet 10.6 inch zooming
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• [PATCH 1/4] HID: waltop: fix Media Tablet 10.6 inch scrolling
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• [PATCH] HID: waltop: fixes and more models supported
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• Re: [PATCH 2/2] USB: musb: support ISO high bandwidth for gadget mode(v1)
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/2] USB: musb: fix kernel panic if using out ep with FIFO_TXRX style(v1)
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: FTDI_SIO Version 1.5.0/1.6.0
  • From: Stephan Zeisberg <zeisberg@xxxxxxxxxxxxxxx>
• Re: FTDI_SIO Version 1.5.0/1.6.0
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: FTDI_SIO Version 1.5.0/1.6.0
  • From: Dave Mielke <dave@xxxxxxxxx>
• [PATCH] cp210x usb driver: add USB_DEVICE for Pirelli DP-L10 mobile.
  • From: ael <law_ence.dev@xxxxxxxxxxxx>
• Re: FTDI_SIO Version 1.5.0/1.6.0
  • From: Stephan <zeisberg@xxxxxxxxxxxxxxx>
• Re: cp210x driver patch. Support for Pirelli DP-L10 mobile: additional USB_DEVICE
  • From: Greg KH <greg@xxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Hans Petter Selasky <hselasky@xxxxxxx>
• Re: option_instat_callback: error -71
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: FTDI_SIO Version 1.5.0/1.6.0
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH] USB: core: update comment to match current function name
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• cp210x driver patch. Support for Pirelli DP-L10 mobile: additional USB_DEVICE
  • From: ael <law_ence.dev@xxxxxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Hans Petter Selasky <hselasky@xxxxxxx>
• Re: option_instat_callback: error -71
  • From: Artem Makhutov <artem@xxxxxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 2/7] drivers/usb/gadget/amd5536udc.c: Remove double test
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 2/7] drivers/usb/gadget: Remove double test
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 2/7] drivers/usb/gadget: Remove double test
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 2/7] drivers/usb/gadget: Remove double test
  • From: Julia Lawall <julia@xxxxxxx>
• Re: Problem with SB700 and usb-serial
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 2/7] drivers/usb/gadget: Remove double test
  • From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/7] drivers/usb/gadget: Remove double test
  • From: Julia Lawall <julia@xxxxxxx>
• Re: [PATCH 2/7] drivers/usb/gadget: Remove double test
  • From: Julia Lawall <julia@xxxxxxx>
• Re: [PATCH 2/7] drivers/usb/gadget/amd5536udc.c: Remove double test
  • From: Julia Lawall <julia@xxxxxxx>
• Re: [PATCH 2/7] drivers/usb/gadget: Remove double test
  • From: Dan Carpenter <error27@xxxxxxxxx>
• Re: [PATCH 2/7] drivers/usb/gadget: Remove double test
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Artem Makhutov <artem@xxxxxxxxxxxx>
• [PATCH 2/7] drivers/usb/gadget: Remove double test
  • From: Julia Lawall <julia@xxxxxxx>
• Re: option_instat_callback: error -71
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] fix hwa-hc / hwa-rc binary module dependencies
  • From: Christopher Friedt <chrisfriedt@xxxxxxxxx>
• Re: Problem with SB700 and usb-serial
  • From: Richard Ash <richard@xxxxxxxxxxxxxxxx>
• [PATCH] usb: allow drivers to use allocated bandwidth until unbound
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxxx>
• Re: [PATCH] USB: musb: move musb debugfs entry under usb debugfs root dir
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/2] USB: musb-gadget: fix bulk IN infinite hangs in double buffer case
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Artem Makhutov <artem@xxxxxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Artem Makhutov <artem@xxxxxxxxxxxx>
• Re: [PATCH 3/3 v2] usbcore: use kernel assigned address for devices under xHCI
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: musb-gadget: fix bulk IN infinite hangs in double buffer case
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Artem Makhutov <artem@xxxxxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Artem Makhutov <artem@xxxxxxxxxxxx>
• [PATCH] usb: power off devices at shutdown
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH] usb: power off devices at shutdown
  • From: Mohammed Amine IL Idrissi <ilidrissiamine@xxxxxxxxx>
• Re: [PATCH] usb: power off devices at shutdown
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: power off devices at shutdown
  • From: Mohammed Amine IL Idrissi <ilidrissiamine@xxxxxxxxx>
• Re: [SUGGESTION] Add generic modem without AT command capabilities
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] USB: musb: move musb debugfs entry under usb debugfs root dir
  • From: Greg KH <greg@xxxxxxxxx>
• RE: [PATCH] USB: musb: move musb debugfs entry under usb debugfs root dir
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: /sys/.../power/autosuspend format
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH] usb: power off devices at shutdown
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] USB: musb: move musb debugfs entry under usb debugfs root dir
  • From: tom.leiming@xxxxxxxxx
• Re: option_instat_callback: error -71
  • From: Greg KH <greg@xxxxxxxxx>
• /sys/.../power/autosuspend format
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: musb-gadget: enable autoclear for OUT transfer in both DMA 0 and DMA 1
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• RE: [PATCH 1/2] USB: musb-gadget: enable autoclear for OUT transfer in both DMA 0 and DMA 1
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: [PATCH 1/2] USB: musb-gadget: fix bulk IN infinite hangs in double buffer case
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH 1/2] USB: musb-gadget: fix bulk IN infinite hangs in double buffer case
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• RE: [PATCH 2/2] USB: musb-gadget: fix DMA length for OUT transfer
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH 2/2] USB: musb-gadget: fix DMA length for OUT transfer
  • From: tom.leiming@xxxxxxxxx
• [PATCH 1/2] USB: musb-gadget: enable autoclear for OUT transfer in both DMA 0 and DMA 1
  • From: tom.leiming@xxxxxxxxx
• Re: [PATCH] usb: power off devices at shutdown
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: musb-gadget: fix OUT transfer in double buffer case
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• RE: [PATCH 2/2] USB: musb-gadget: fix OUT transfer in double buffer case
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: [PATCH 1/2] USB: musb-gadget: fix bulk IN infinite hangs in double buffer case
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH 2/2] USB: musb-gadget: fix OUT transfer in double buffer case
  • From: tom.leiming@xxxxxxxxx
• [PATCH 1/2] USB: musb-gadget: fix bulk IN infinite hangs in double buffer case
  • From: tom.leiming@xxxxxxxxx
• Re: Problem with SB700 and usb-serial
  • From: wfp5p@xxxxxxxxxxxxxxxxxxxxxxxxx (Bill Pemberton)
• Re: [PATCH] usb: power off devices at shutdown
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [PATCH] cp210x: Add B&G H3000 link cable ID
  • From: Jason Detring <jason.detring@xxxxxxxxxx>
• cp210x: Add B&G H3000 link cable ID
  • From: Jason Detring <jason.detring@xxxxxxxxxx>
• Re: Problem with SB700 and usb-serial
  • From: wfp5p@xxxxxxxxxxxxxxxxxxxxxxxxx (Bill Pemberton)
• Re: Problem with SB700 and usb-serial
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Problem with SB700 and usb-serial
  • From: wfp5p@xxxxxxxxxxxxxxxxxxxxxxxxx (Bill Pemberton)
• Re: Problem with SB700 and usb-serial
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: gs_start_io() and gs_close()
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Problem with SB700 and usb-serial
  • From: wfp5p@xxxxxxxxxxxxxxxxxxxxxxxxx (Bill Pemberton)
• Re: option_instat_callback: error -71
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: power off devices at shutdown
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: power off devices at shutdown
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] usb: power off devices at shutdown
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH] usb: power off devices at shutdown
  • From: Mohammed Amine IL Idrissi <ilidrissiamine@xxxxxxxxx>
• Re: [PATCH] usb: power off devices at shutdown
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Artem Makhutov <artem@xxxxxxxxxxxx>
• Re: EHCI periodic processing
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Dave Mielke <dave@xxxxxxxxx>
• [PATCH] usb: power off devices at shutdown
  • From: Mohammed Amine IL Idrissi <ilidrissiamine@xxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Artem Makhutov <artem@xxxxxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Artem Makhutov <artem@xxxxxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Josua Dietze <digidietze@xxxxxxxxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Artem Makhutov <artem@xxxxxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: option_instat_callback: error -71
  • From: Artem Makhutov <artem@xxxxxxxxxxxx>
• [SUGGESTION] Add generic modem without AT command capabilities
  • From: Philippe Corbes <philippe.corbes@xxxxxxxxx>
• Re: option_instat_callback: error -71
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: EHCI periodic processing
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• option_instat_callback: error -71
  • From: Artem Makhutov <artem@xxxxxxxxxxxx>
• Re: gs_start_io() and gs_close()
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: Question about OTG 2.0 support
  • From: Praveena Nadahally <praveen.nadahally@xxxxxxxxxxxxxx>
• Re: OTG test status
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• OTG test status
  • From: David Brownell <david-b@xxxxxxxxxxx>
• gs_start_io() and gs_close()
  • From: Jim Sung <jsung@xxxxxxxxxxxxxx>
• Re: [PATCH 8/8 v2] usb : musb: Using runtime pm apis for musb.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/8 v2] usb: musb: Offmode fix for idle path
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/8 v2]usb: musb: hwmod and runtime pm support for musb
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/8 v2] OMAP: Hwmod api changes
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Dave Mielke <dave@xxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Greg KH <greg@xxxxxxxxx>
• RE: Windows fails to install FBSG based drive
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Dave Mielke <dave@xxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Dave Mielke <dave@xxxxxxxxx>
• RE: Windows fails to install FBSG based drive
  • From: "Murphy, Robert" <Robert.Murphy@xxxxxxxxxxx>
• RE: Windows fails to install FBSG based drive
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: Windows fails to install FBSG based drive
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: Windows fails to install FBSG based drive
  • From: "Murphy, Robert" <Robert.Murphy@xxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: EHCI periodic processing
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB keyboard losing keystrokes in 2.6.34.2+
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [Bugme-new] [Bug 16821] New: g_ether no carrier while it is
  • From: Brian Niebuhr <BNiebuhr@xxxxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Dave Mielke <dave@xxxxxxxxx>
• Re: Question about OTG 2.0 support
  • From: Greg KH <greg@xxxxxxxxx>
• Re: EHCI periodic processing
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V1] USB Gadget: Verify VBUS current before setting the device self-powered bit
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: hwa-hc needs a module reference for hwa-rc, simple and dirty repair included. [was: usb deferred probing]
  • From: David Vrabel <david.vrabel@xxxxxxx>
• Re: [PATCH] fix hwa-hc / hwa-rc binary module dependencies
  • From: David Vrabel <david.vrabel@xxxxxxx>
• Re: usb deferred probing
  • From: David Vrabel <david.vrabel@xxxxxxx>
• Question about OTG 2.0 support
  • From: Praveena NADAHALLY <praveen.nadahally@xxxxxxxxxxxxxx>
• Re: [patch] dbgp: cleanup: remove unneeded check
  • From: stephane duverger <stephane.duverger@xxxxxxxxx>
• [PATCH] fix hwa-hc / hwa-rc binary module dependencies
  • From: Christopher Friedt <chrisfriedt@xxxxxxxxx>
• Re: USB keyboard losing keystrokes in 2.6.34.2+
  • From: Chuck Ebbert <cebbert@xxxxxxxxxx>
• [PATCH V1] USB Gadget: Verify VBUS current before setting the device self-powered bit
  • From: Praveena Nadahally <praveen.nadahally@xxxxxxxxxxxxxx>
• Re: usb deferred probing
  • From: Christopher Friedt <chrisfriedt@xxxxxxxxx>
• hwa-hc needs a module reference for hwa-rc, simple and dirty repair included. [was: usb deferred probing]
  • From: Christopher Friedt <chrisfriedt@xxxxxxxxx>
• Re: USB keyboard losing keystrokes in 2.6.34.2+
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 1/1] usbhid: Set Report ID properly for Output reports on the Control endpoint.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• USB keyboard losing keystrokes in 2.6.34.2+
  • From: Chuck Ebbert <cebbert@xxxxxxxxxx>
• Re: FTDI_SIO version 1.5.0/1.6.0
  • From: Stephan <zeisberg@xxxxxxxxxxxxxxx>
• Re: EHCI periodic processing
  • From: Hans Petter Selasky <hselasky@xxxxxxx>
• Re: [ANN] HID dumping tool
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• Re: [Bugme-new] [Bug 16821] New: g_ether no carrier while it is
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH][RFC] xhci fixes
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• Re: [Bugme-new] [Bug 16821] New: g_ether no carrier while it is
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [Bugme-new] [Bug 16821] New: g_ether no carrier while it is
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: EHCI periodic processing
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: EHCI periodic processing
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [PATCH][RFC] xhci fixes
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: Windows fails to install FBSG based drive
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V4] usb: musb: host: Unmap the buffer for PIO data transfers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] usbhid: Set Report ID properly for Output reports on the Control endpoint.
  • From: Jiri Kosina <jkosina@xxxxxxx>
• RE: Windows fails to install FBSG based drive
  • From: "Murphy, Robert" <Robert.Murphy@xxxxxxxxxxx>
• Re: [PATCH 2.6.35.3] usbhid: USB 5543:6001 needs HID_QUIRK_MULTI_INPUT
  • From: Jiri Kosina <jkosina@xxxxxxx>
• [PATCH 2.6.35.3] usbhid: USB 5543:6001 needs HID_QUIRK_MULTI_INPUT
  • From: Decio Fonini <fonini@xxxxxxxxx>
• RE: Windows fails to install FBSG based drive
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH V4] usb: musb: host: Unmap the buffer for PIO data transfers
  • From: Maulik Mankad <x0082077@xxxxxx>
• RE: [PATCH V3] usb: musb: host: Unmap the buffer for PIO data transfers
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: [PATCH V3] usb: musb: host: Unmap the buffer for PIO data transfers
  • From: "Maulik" <x0082077@xxxxxx>
• Re: [PATCH V3] usb: musb: host: Unmap the buffer for PIO data transfers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Problem with USB Class 2 Audio Driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH V3] usb: musb: host: Unmap the buffer for PIO data transfers
  • From: Maulik Mankad <x0082077@xxxxxx>
• RE: Windows fails to install FBSG based drive
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: EHCI periodic processing
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2] usb: musb: host: Unmap the buffer for PIO data transfers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: Windows fails to install FBSG based drive
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: Help with USB3 suspend/resume issue
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: Windows fails to install FBSG based drive
  • From: "Murphy, Robert" <Robert.Murphy@xxxxxxxxxxx>
• RE: Windows fails to install FBSG based drive
  • From: "Murphy, Robert" <Robert.Murphy@xxxxxxxxxxx>
• RE: Windows fails to install FBSG based drive
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: Windows fails to install FBSG based drive
  • From: "Murphy, Robert" <Robert.Murphy@xxxxxxxxxxx>
• RE: [PATCH V2] usb: musb: host: Unmap the buffer for PIO data transfers
  • From: "Maulik" <x0082077@xxxxxx>
• Re: [PATCH V2] usb: musb: host: Unmap the buffer for PIO data transfers
  • From: David Vrabel <david.vrabel@xxxxxxx>
• Re: [PATCH 1/2] CP210x Add new device ID
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: EHCI periodic processing
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: Problem with USB Class 2 Audio Driver
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: Help with USB3 suspend/resume issue
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: Problem with USB Class 2 Audio Driver
  • From: Daniel Mack <daniel@xxxxxxxx>
• [PATCH V2] usb: musb: host: Unmap the buffer for PIO data transfers
  • From: Maulik Mankad <x0082077@xxxxxx>
• Re: [PATCH] usb: musb: host: Unmap the buffer for PIO data transfers
  • From: Maulik Mankad <mankad.maulik@xxxxxxxxx>
• [PATCH 01/29] USB: uvc_v4l2: cleanup test for end of loop
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 29/29] ARM: imx: fix build failure concerning otg/ulpi
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 28/29] USB: ftdi_sio: add product ID for Lenz LI-USB
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 26/29] USB: iowarrior: fix misuse of return value of copy_to_user()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 27/29] USB: adutux: fix misuse of return value of copy_to_user()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 24/29] USB: xhci: Remove buggy assignment in next_trb()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 25/29] USB: xHCI: update ring dequeue pointer when process missed tds
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 22/29] USB: serial: io_ti.c: don't return 0 if writing the download record failed
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 17/29] USB: ssu100: add disconnect function for ssu100
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 23/29] USB: ftdi_sio: Add ID for Ionics PlugComputer
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 21/29] USB: otg: twl4030: fix wrong assumption of starting state
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 20/29] USB: gadget: Return -ENOMEM on memory allocation failure
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 19/29] USB: gadget: fix composite kernel-doc warnings
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 18/29] USB: ssu100: set tty_flags in ssu100_process_packet
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 09/29] USB: io_ti: check firmware version before updating
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 14/29] USB: ssu100: add register parameter to ssu100_setregister
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 16/29] USB: serial: export symbol usb_serial_generic_disconnect
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 07/29] USB: CP210x Fix Break On/Off
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 15/29] USB: ssu100: rework logic for TIOCMIWAIT
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 12/29] USB: ssu100: refine process_packet in ssu100
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 10/29] USB: r8a66597-udc: return -ENOMEM if kzalloc() fails
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 11/29] USB: ssu100: add locking for port private data in ssu100
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 13/29] USB: ssu100: remove duplicate #defines in ssu100
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 02/29] USB: option: add Celot CT-650
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 08/29] USB: ftdi_sio: fix endianess of max packet size
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 04/29] USB: add device IDs for igotu to navman
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 06/29] USB: pl2303: New vendor and product id
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 05/29] USB: serial: fix leak of usb serial module refrence count
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 03/29] USB: isp1760: use a write barrier to ensure proper ndelay timing
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [GIT PATCH] USB fixes for .36-rc2
  • From: Greg KH <gregkh@xxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Dave Mielke <dave@xxxxxxxxx>
• Re: Help with USB3 suspend/resume issue
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Help with USB3 suspend/resume issue
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: EHCI periodic processing
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] CP210x Add new device ID
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 2/2] CP210x - Device IDs via Module Param
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH 2/2] CP210x - Device IDs via Module Param
  • From: Craig Shelley <craig@xxxxxxxxxxxxxxxx>
• [PATCH 1/2] CP210x Add new device ID
  • From: Craig Shelley <craig@xxxxxxxxxxxxxxxx>
• Re: Problem with USB Class 2 Audio Driver
  • From: "J. Gordon Rankin" <waudio@xxxxxxxxx>
• RE: Windows fails to install FBSG based drive
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: Windows fails to install FBSG based drive
  • From: Greg KH <greg@xxxxxxxxx>
• Re: EHCI periodic processing
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: Windows fails to install FBSG based drive
  • From: "Murphy, Robert" <Robert.Murphy@xxxxxxxxxxx>
• Re: Problem with USB Class 2 Audio Driver
  • From: Daniel Mack <daniel@xxxxxxxx>
• EHCI periodic processing
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB Gadget: Verify VBUS current before setting the device self-powered bit
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: Question about USB shutdown procedure
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Question about USB shutdown procedure
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Question about USB shutdown procedure
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Question about USB shutdown procedure
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Question about USB shutdown procedure
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3 v2] usbcore: use kernel assigned address for devices under xHCI
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: usb deferred probing
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: host: Unmap the buffer for PIO data transfers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] HID: uclogic: fix coding style
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH 2/2] HID: uclogic: add proper support for PF1209
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH v3] HID: add support for two Waltop tablets
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH v4 0/2] Get and Set Feature Reports on HIDRAW (USB and Bluetooth)
  • From: Jiri Kosina <jkosina@xxxxxxx>
• [PATCH 2/2] HID: uclogic: add proper support for PF1209
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• [PATCH 1/2] HID: uclogic: fix coding style
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• [PATCH 3/3 v2] usbcore: use kernel assigned address for devices under xHCI
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 1/3 v2] xHCI: Add pointer to udev in struct xhci_virt_device
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 2/3 v2] xHCI: change xhci_reset_device() to allocate new device
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• RE: [PATCH][RFC] xhci fixes
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• usb deferred probing
  • From: Christopher Friedt <chrisfriedt@xxxxxxxxx>
• [PATCH] USB Gadget: Verify VBUS current before setting the device self-powered bit
  • From: Praveena Nadahally <praveen.nadahally@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: host: Unmap the buffer for PIO data transfers
  • From: Maulik Mankad <mankad.maulik@xxxxxxxxx>
• Re: [PATCH v2] ARM: imx: fix build failure concerning otg/ulpi
  • From: Greg KH <gregkh@xxxxxxx>
• [PATCH/RFC] HID: rdesc parser: remove local item size limit
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• Re: [PATCH v2] ARM: imx: fix build failure concerning otg/ulpi
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: host: Unmap the buffer for PIO data transfers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Problem with STM8S Discovery kit
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: Fix kernel oops with g_ether and Windows
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH] USB: Fix kernel oops with g_ether and Windows
  • From: Maxim Osipov <maxim.osipov@xxxxxxxxx>
• Re: [PATCH] usb: musb: host: Unmap the buffer for PIO data transfers
  • From: Maulik Mankad <mankad.maulik@xxxxxxxxx>
• Re: EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Dennis Nezic <dennisn@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH][RFC] xhci fixes
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: sysfs for gadget driver
  • From: Greg KH <greg@xxxxxxxxx>
• re: HID: hiddev: protect against disconnect/NULL-dereference race
  • From: Dan Carpenter <error27@xxxxxxxxx>
• Re: sysfs for gadget driver
  • From: Dan Eisenhut <daneisenhut@xxxxxxxxx>
• Re: sysfs for gadget driver
  • From: Greg KH <greg@xxxxxxxxx>
• RE: omap3_defconfig: USB_OTG unmet dependencies
  • From: "Aguirre, Sergio" <saaguirre@xxxxxx>
• sysfs for gadget driver
  • From: Dan Eisenhut <daneisenhut@xxxxxxxxx>
• Re: [PATCH] rndis: section mismatch fix
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Dennis Nezic <dennisn@xxxxxxxxxxxxxxxxxx>
• Re: Problem with STM8S Discovery kit
  • From: Vaclav Peroutka <vaclavpe@xxxxxxxxx>
• [PATCH] rndis: section mismatch fix
  • From: Henrik Kretzschmar <henne@xxxxxxxxxxxxxxxx>
• [PATCH] USB: gadget: section mismatch fix
  • From: Henrik Kretzschmar <henne@xxxxxxxxxxxxxxxx>
• Re: Regarding USB-Serial Device driver
  • From: Greg KH <gregkh@xxxxxxx>
• RE: FW: Staging usb_gadget_register driver, 2.6.35
  • From: "David Cross" <david.cross@xxxxxxxxxxx>
• [PATCH v3] HID: add support for two Waltop tablets
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• Re: EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Dennis Nezic <dennisn@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: host: Unmap the buffer for PIO data transfers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>