Linux USB Users

• Thread Index

• RE: Windows fails to install FBSG based drive
  • From: "Murphy, Robert" <Robert.Murphy@xxxxxxxxxxx>
• Re: Windows fails to install FBSG based drive
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: FW: Concerns regarding file backed storage gadget
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: musb: host: Unmap the buffer for PIO data transfers
  • From: Maulik Mankad <x0082077@xxxxxx>
• RE: [PATCH 3/5] usb: ehci: relocate PHY reset code
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [RFC] [PATCH 6/7] usb: ehci: Introduce CONFIG_USB_EHCI_HCD_OMAP3
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFC] [PATCH 5/5] usb: ohci: omap: enable the ohci port on OMAP4SDP
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [RFC] [PATCH 4/5] usb: ohci: omap: Initialize resources for OMAP4
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [RFC] [PATCH 3/5] usb: ohci: omap: IO mux mode settings for omap4
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [RFC] [PATCH 2/5] usb: ohci: omap: Add OMAP4 support
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [RFC] [PATCH 1/5] usb: ohci-omap3: seperate the OMAP3-specific code
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [RFC] [PATCH 0/5] usb: ohci: omap: Add OMAP4 Support
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• Re: Regarding USB-Serial Device driver
  • From: "Raju Rameshwar Uprade" <rajsingh@xxxxxxxxxxxxxxxx>
• RE: [RFC] [PATCH 6/7] usb: ehci: Introduce CONFIG_USB_EHCI_HCD_OMAP3
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: [RFC] [PATCH 3/7] usb: ehci-omap: omap: Add OMAP4 support
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [RFC] [PATCH 6/7] usb: ehci: Introduce CONFIG_USB_EHCI_HCD_OMAP3
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [RFC] [PATCH 3/7] usb: ehci-omap: omap: Add OMAP4 support
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: [RFC] [PATCH 3/7] usb: ehci-omap: omap: Add OMAP4 support
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [RFC] [PATCH 6/7] usb: ehci: Introduce CONFIG_USB_EHCI_HCD_OMAP3
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [RFC] [PATCH 3/7] usb: ehci-omap: omap: Add OMAP4 support
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [RFC] [PATCH 3/7] usb: ehci-omap: omap: Add OMAP4 support
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [RFC] [PATCH 6/7] usb: ehci: Introduce CONFIG_USB_EHCI_HCD_OMAP3
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [RFC] [PATCH 6/7] usb: ehci: Introduce CONFIG_USB_EHCI_HCD_OMAP3
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [RFC] [PATCH 5/7] omap: usb: ehci: Initialize resources for omap4
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [RFC] [PATCH 3/7] usb: ehci-omap: omap: Add OMAP4 support
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: FW: Staging usb_gadget_register driver, 2.6.35
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [RFC] [PATCH 2/7] usb: ehci-omap: don't execute OMAP3-specific code on non-OMAP3
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: Regarding USB-Serial Device driver
  • From: Greg KH <gregkh@xxxxxxx>
• Re: Regarding USB-Serial Device driver
  • From: "Raju Rameshwar Uprade" <rajsingh@xxxxxxxxxxxxxxxx>
• Re: FW: Staging usb_gadget_register driver, 2.6.35
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Windows fails to install FBSG based drive
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 001/001] USB: ftdi_sio: fix endianess of max packet size
  • From: Stephen Pape <srpape@xxxxxxxxx>
• RE: FW: Staging usb_gadget_register driver, 2.6.35
  • From: "David Cross" <david.cross@xxxxxxxxxxx>
• Re: [PATCH 1/2][USB] USB/PowerTV: Add support for PowerTV USB interface
  • From: David VomLehn <dvomlehn@xxxxxxxxx>
• Re: EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Dennis Nezic <dennisn@xxxxxxxxxxxxxxxxxx>
• RE: FW: Staging usb_gadget_register driver, 2.6.35
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: FW: Staging usb_gadget_register driver, 2.6.35
  • From: "David Cross" <david.cross@xxxxxxxxxxx>
• Re: FW: Concerns regarding file backed storage gadget
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 001/001] USB: ftdi_sio: fix endianess of max packet size
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• RE: FW: Concerns regarding file backed storage gadget
  • From: "Murphy, Robert" <Robert.Murphy@xxxxxxxxxxx>
• RE: FW: Concerns regarding file backed storage gadget
  • From: "Hardy, Ron" <Ron.Hardy@xxxxxxxxxxx>
• Windows fails to install FBSG based drive
  • From: "Murphy, Robert" <Robert.Murphy@xxxxxxxxxxx>
• Re: FW: Concerns regarding file backed storage gadget
  • From: Greg KH <greg@xxxxxxxxx>
• RE: FW: Concerns regarding file backed storage gadget
  • From: "Murphy, Robert" <Robert.Murphy@xxxxxxxxxxx>
• Re: FW: Concerns regarding file backed storage gadget
  • From: Greg KH <greg@xxxxxxxxx>
• RE: FW: Concerns regarding file backed storage gadget
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [ANN] HID dumping tool
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• RE: FW: Concerns regarding file backed storage gadget
  • From: "Murphy, Robert" <Robert.Murphy@xxxxxxxxxxx>
• Re: FW: Concerns regarding file backed storage gadget
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: ftdi_sio: add product ID for Lenz LI-USB
  • From: galens@xxxxxxxxxxxxxx
• patch "USB: gadget: fix composite kernel-doc warnings" added to gregkh-2.6 tree
  • From: <gregkh@xxxxxxx>
• Re: FW: Concerns regarding file backed storage gadget
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/2][USB] USB/PowerTV: Add support for PowerTV USB interface
  • From: Greg KH <greg@xxxxxxxxx>
• FW: Concerns regarding file backed storage gadget
  • From: "Murphy, Robert" <Robert.Murphy@xxxxxxxxxxx>
• Re: [PATCH 1/2] xHCI: change xhci_reset_device() to allocate new device
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [ANN] HID dumping tool
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [ANN] HID dumping tool
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• Re: Problem with STM8S Discovery kit
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: RIP: 0010:[<ffffffff81495d87>] [<ffffffff81495d87>] _raw_spin_lock_irq+0x1b/0x2b
  • From: Jeff Chua <jeff.chua.linux@xxxxxxxxx>
• Re: Regarding USB-Serial Device driver
  • From: Greg KH <gregkh@xxxxxxx>
• Re: FW: Staging usb_gadget_register driver, 2.6.35
  • From: Greg KH <greg@xxxxxxxxx>
• Re: RIP: 0010:[<ffffffff81495d87>] [<ffffffff81495d87>] _raw_spin_lock_irq+0x1b/0x2b
  • From: Greg KH <greg@xxxxxxxxx>
• Re: RIP: 0010:[<ffffffff81495d87>] [<ffffffff81495d87>] _raw_spin_lock_irq+0x1b/0x2b
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Regarding USB-Serial Device driver
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [RFC] [PATCH 7/7] omap: ehci: enable the ehci port on OMAP4SDP
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [RFC] [PATCH 6/7] usb: ehci: Introduce CONFIG_USB_EHCI_HCD_OMAP3
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [RFC] [PATCH 5/7] omap: usb: ehci: Initialize resources for omap4
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [RFC] [PATCH 4/7] omap: usb: ehci: IO mux mode settings for omap4
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [RFC] [PATCH 3/7] usb: ehci-omap: omap: Add OMAP4 support
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [RFC] [PATCH 2/7] usb: ehci-omap: don't execute OMAP3-specific code on non-OMAP3
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [RFC] [PATCH 1/7] usb: ehci-omap: Add the HSUSB base address
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 0/7] usb: ehci: omap: Adding OMAP4 support
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• RE: [PATCH 1/2] xHCI: change xhci_reset_device() to allocate new device
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• [PATCH v2] HID: Add support for two Waltop tablets
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• Re: [PATCH] hid: Add support for chicony multitouch screens.
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: Problem with STM8S Discovery kit
  • From: Vaclav Peroutka <vaclavpe@xxxxxxxxx>
• [PATCH] hid: Add support for chicony multitouch screens.
  • From: David Gow <david@xxxxxxxxxxxxxxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: Kernel warning from kobject in USB HID
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: Regarding USB-Serial Device driver
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• RE: [PATCH 5/6] usb: ohci: don't hard-code TLL channel count
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH 5/6] usb: ohci: don't hard-code TLL channel count
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [PATCH 5/6] usb: ohci: don't hard-code TLL channel count
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH 5/6] usb: ohci: don't hard-code TLL channel count
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 3/5] usb: ehci: relocate PHY reset code
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RIP: 0010:[<ffffffff81495d87>] [<ffffffff81495d87>] _raw_spin_lock_irq+0x1b/0x2b
  • From: Jeff Chua <jeff.chua.linux@xxxxxxxxx>
• RE: FW: Staging usb_gadget_register driver, 2.6.35
  • From: "David Cross" <david.cross@xxxxxxxxxxx>
• [PATCH 1/1] CP210x Fix Break On/Off
  • From: Craig Shelley <craig@xxxxxxxxxxxxxxxx>
• [PATCH] USB: sam-ba: add driver for Atmel SAM Boot Assistant (SAM-BA)
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [ANN] HID dumping tool
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [ANN] HID dumping tool
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/2] xHCI: change xhci_reset_device() to allocate new device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] xHCI: change xhci_reset_device() to allocate new device
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: FW: Staging usb_gadget_register driver, 2.6.35
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: Problem with STM8S Discovery kit
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Kernel warning from kobject in USB HID
  • From: Stephen Hemminger <shemminger@xxxxxxxxxx>
• Re: USB devices without a driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB devices without a driver
  • From: Greg KH <greg@xxxxxxxxx>
• USB devices without a driver
  • From: Mark Hackett <swannee.digger@xxxxxxxxxxxxxx>
• Re: Problem with STM8S Discovery kit
  • From: Vaclav Peroutka <vaclavpe@xxxxxxxxx>
• RE: [PATCH 5/6] usb: ohci: don't hard-code TLL channel count
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• [PATCH 5/5] usb: ohci: don't hard-code TLL channel count
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 5/6] usb: ohci: don't hard-code TLL channel count
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 4/5] usb: ohci: omap: Update clock names to be same across OMAP3 and OMAP4
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 3/5] usb: ehci: relocate PHY reset code
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 2/5] usb: ehci: don't hard-code TLL channel count.
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 1/5] usb: ehci: omap: Update clock names to be same across OMAP3 and OMAP4
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 0/5] usb: omap: prepare for OMAP4 EHCI and OHCI support
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• Re: [PATCH 3/3] usb/otg/ulpi: extend the generic ulpi driver.
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• RE: [PATCH 1/2] xHCI: change xhci_reset_device() to allocate new device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [RFC] USB 3.0 Hub Changes
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 001/001] USB: ftdi_sio: fix endianess of max packet size
  • From: Michael Wileczka <mikewileczka@xxxxxxxxx>
• [PATCH 8/8 v2] usb : musb: Using runtime pm apis for musb.
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 7/8 v2] OMAP: Hwmod api changes
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 6/8 v2] usb: musb: Offmode fix for idle path
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 5/8 v2] usb: musb: Using omap_device_build for musb device registration
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 4/8 v2] usb: musb: HWMOD database structures addition for OMAP4
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 3/8 v2] usb: musb: HWMOD database structures addition for OMAP3
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 2/8 v2] usb: musb: Remove board_data parameter from musb_platform_init()
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 1/8 v2] usb: musb: Adding names for IRQs in resource structure
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 0/8 v2]usb: musb: hwmod and runtime pm support for musb
  • From: Hema HK <hemahk@xxxxxx>
• Re: [PATCH 3/3] usb/otg/ulpi: extend the generic ulpi driver.
  • From: Heikki Krogerus <ext-heikki.krogerus@xxxxxxxxx>
• Re: [PATCH RESEND] USB HID: Add ID for eGalax Multitouch used in JooJoo tablet
  • From: Mathieu Virbel <tito@xxxxxxxxxx>
• Re: Kernel warning from kobject in USB HID
  • From: Jiri Kosina <jkosina@xxxxxxx>
• RE: [PATCH 1/2] xHCI: change xhci_reset_device() to allocate new device
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• RE: [PATCH][RFC] xhci fixes
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• Re: [PATCHv8 04/13] USB: gadget: mass_storage: moved strings handling code to composite
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: [PATCH 027/148] USB: Add a serial number parameter to g_file_storage module
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: [PATCH][RFC] xhci fixes
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC] USB 3.0 Hub Changes
  • From: Greg KH <gregkh@xxxxxxx>
• Kernel warning from kobject in USB HID
  • From: Stephen Hemminger <shemminger@xxxxxxxxxx>
• Re: [BUG] 2.6.31.2 io_ti
  • From: Chris Beauchamp <chris@xxxxxxxxxxxxx>
• Re: [RFC] USB 3.0 Hub Changes
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [RFC] USB 3.0 Hub Changes
  • From: John Youn <John.Youn@xxxxxxxxxxxx>
• Re: [BUG] 2.6.31.2 io_ti
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [RFC] USB 3.0 Hub Changes
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [BUG] 2.6.31.2 io_ti
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: FW: Staging usb_gadget_register driver, 2.6.35
  • From: David Cross <david.cross@xxxxxxxxxxx>
• Re: [RFC] USB 3.0 Hub Changes
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [RFC] USB 3.0 Hub Changes
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: endianess patch
  • From: Greg KH <greg@xxxxxxxxx>
• endianess patch
  • From: Michael Wileczka <mikewileczka@xxxxxxxxx>
• RE: Staging usb_gadget_register driver, 2.6.35
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Staging usb_gadget_register driver, 2.6.35
  • From: "David Cross" <david.cross@xxxxxxxxxxx>
• Re: [2.6.35] usb 2.0 em28xx kernel panic general protection fault: 0000 [#1] SMP RIP: 0010:[<ffffffffa004fbc5>] [<ffffffffa004fbc5>] em28xx_isoc_copy_vbi+0x62e/0x812 [em28xx]
  • From: Maciej Rutecki <maciej.rutecki@xxxxxxxxx>
• Re: [patch -NEXT] usb/gadget/webcam: fix Kconfig depends again
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: Problem with STM8S Discovery kit
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Problem with STM8S Discovery kit
  • From: Vaclav Peroutka <vaclavpe@xxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Daniel Mack <daniel@xxxxxxxx>
• Re: [PATCH 3/3] usb/otg/ulpi: extend the generic ulpi driver.
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Dave Mielke <dave@xxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Dave Mielke <dave@xxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: fix deadlock with bandwidth_mutex
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] xHCI: change xhci_reset_device() to allocate new device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Daniel Mack <daniel@xxxxxxxx>
• [PATCH] usb: fix deadlock with bandwidth_mutex
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxxx>
• Re: resending patch to retry reset in case it failed
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [PATCH 2/2] usbcore: use kernel assigned address for devices under xHCI
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 1/2] xHCI: change xhci_reset_device() to allocate new device
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 1/1] usbhid: Set Report ID properly for Output reports on the Control endpoint.
  • From: Alan Ott <alan@xxxxxxxxxxx>
• RE: [PATCH][RFC] xhci fixes
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH] USB: r8a66597-udc: return -ENOMEM if kzalloc() fails
  • From: Axel Lin <axel.lin@xxxxxxxxx>
• Re: [PATCH][RFC] xhci fixes
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [patch] ehci-ppc-of: problems in unwind
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [BUG] 2.6.31.2 io_ti
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB card reader autosuspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [BUG] 2.6.31.2 io_ti
  • From: Chris Beauchamp <chris@xxxxxxxxxxxxx>
• Re: [BUG] 2.6.31.2 io_ti
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [BUG] 2.6.31.2 io_ti
  • From: Chris Beauchamp <chris@xxxxxxxxxxxxx>
• [PATCH v4 2/2] Bluetooth: hidp: Add support for hidraw HIDIOCGFEATURE and HIDIOCSFEATURE
  • From: Alan Ott <alan@xxxxxxxxxxx>
• [PATCH v4 1/2] HID: Add Support for Setting and Getting Feature Reports from hidraw
  • From: Alan Ott <alan@xxxxxxxxxxx>
• [PATCH v4 0/2] Get and Set Feature Reports on HIDRAW (USB and Bluetooth)
  • From: Alan Ott <alan@xxxxxxxxxxx>
• Re: [PATCH] Add support for two Waltop tablets
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• [PATCH] Add support for two Waltop tablets
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• Re: FTDI_SIO Version 1.5.0/1.6.0
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: USB card reader autosuspend
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Dave Mielke <dave@xxxxxxxxx>
• Re: Problem with STM8S Discovery kit
  • From: Vaclav Peroutka <vaclavpe@xxxxxxxxx>
• Re: [BUG] 2.6.31.2 io_ti
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 11/16] drivers/media/video: Use available error codes
  • From: Julia Lawall <julia@xxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RESEND] USB HID: Add ID for eGalax Multitouch used in JooJoo tablet
  • From: Stéphane Chatty <chatty@xxxxxxx>
• Re: USB card reader autosuspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RESEND] USB HID: Add ID for eGalax Multitouch used in JooJoo tablet
  • From: Stéphane Chatty <chatty@xxxxxxx>
• Re: Problem with STM8S Discovery kit
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB card reader autosuspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: USB card reader autosuspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RESEND] USB HID: Add ID for eGalax Multitouch used in JooJoo tablet
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH RESEND] USB HID: Add ID for eGalax Multitouch used in JooJoo tablet
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 8/8 ]usb : musb:Using runtime pm apis for musb.
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH 3/3] usb/otg/ulpi: extend the generic ulpi driver.
  • From: Heikki Krogerus <ext-heikki.krogerus@xxxxxxxxx>
• RE: [PATCH] USB: Gadget: g_multi: added INF file for gadget with multiple configurations
  • From: Dries Van Puymbroeck <Dries.VanPuymbroeck@xxxxxxxxxx>
• Re: [PATCH v2] ARM: imx: fix build failure concerning otg/ulpi
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Help for s3c-hsotg driver
  • From: Jason Shi <jiasheng.shi@xxxxxxxxx>
• Re: [PATCH v2] ARM: imx: fix build failure concerning otg/ulpi
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Dennis Nezic <dennisn@xxxxxxxxxxxxxxxxxx>
• Re: EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: USB card reader autosuspend
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 3/3] usb/otg/ulpi: extend the generic ulpi driver.
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Dennis Nezic <dennisn@xxxxxxxxxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Daniel Mack <daniel@xxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2] ARM: imx: fix build failure concerning otg/ulpi
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Dennis Nezic <dennisn@xxxxxxxxxxxxxxxxxx>
• Re: USB fail on Toshiba A210-15j
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
• Re: EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Dennis Nezic <dennisn@xxxxxxxxxxxxxxxxxx>
• Re: EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Dennis Nezic <dennisn@xxxxxxxxxxxxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: USB fail on Toshiba A210-15j
  • From: okias <d.okias@xxxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: Greg KH <greg@xxxxxxxxx>
• Re: USB fail on Toshiba A210-15j
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] fix building on non-Linux systems (e.g. BSD)
  • From: Greg KH <greg@xxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Dave Mielke <dave@xxxxxxxxx>
• Re: Problem with STM8S Discovery kit
  • From: Vaclav Peroutka <vaclavpe@xxxxxxxxx>
• USB fail on Toshiba A210-15j
  • From: okias <d.okias@xxxxxxxxx>
• [patch] ehci-ppc-of: problems in unwind
  • From: Dan Carpenter <error27@xxxxxxxxx>
• Re: [PATCH] USB: Gadget: g_multi: added INF file for gadget with multiple configurations
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: [PATCH V2] sound: usb: USB3 SuperSpeed sound support
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH] USB: Gadget: g_multi: added INF file for gadget with multiple configurations
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH] fix building on non-Linux systems (e.g. BSD)
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: [PATCH] fix building on non-Linux systems (e.g. BSD)
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: [PATCH] fix building on non-Linux systems (e.g. BSD)
  • From: Hans Petter Selasky <hselasky@xxxxxxx>
• Re: [PATCH] fix building on non-Linux systems (e.g. BSD)
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] fix building on non-Linux systems (e.g. BSD)
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: lsusb -t doesn't always work with 2.6.35
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Problem when USB hub is inserted
  • From: Alessio Sangalli <alesan@xxxxxxxxxxx>
• Re: [PATCH] fix building on non-Linux systems (e.g. BSD)
  • From: Greg KH <greg@xxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH RESEND] USB HID: Add ID for eGalax Multitouch used in JooJoo tablet
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: lsusb -t doesn't always work with 2.6.35
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH][RFC] xhci fixes
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: Problem with STM8S Discovery kit
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Problem when USB hub is inserted
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: Gadget: g_multi: added INF file for gadget with multiple configurations
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: USB card reader autosuspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] fix building on non-Linux systems (e.g. BSD)
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Dave Mielke <dave@xxxxxxxxx>
• [PATCH] usbutils.pc: use datarootdir
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCHv8 04/13] USB: gadget: mass_storage: moved strings handling code to composite
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Dave Mielke <dave@xxxxxxxxx>
• Re: [PATCH] USB: Gadget: g_multi: added INF file for gadget with multiple configurations
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCHv8 04/13] USB: gadget: mass_storage: moved strings handling code to composite
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH V2] sound: usb: USB3 SuperSpeed sound support
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: [PATCH] sound: usb: USB3 Super Speed patch
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH] USB: s3c-hsotg: Remove DEBUG define
  • From: Maurus Cuelenaere <mcuelenaere@xxxxxxxxx>
• Re: [PATCH] sound: usb: USB3 Super Speed patch
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Intel EHCI HCD 8086:27cc quirk?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] Workaround for hardware problem in host mode for the MUSB chipset. Add missed TXPKTRDY check.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] Workaround for hardware problem in host mode for the MUSB chipset. Add missed TXPKTRDY check.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: [PATCH] Workaround for hardware problem in host mode for the MUSB chipset. Add missed TXPKTRDY check.
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH] Workaround for hardware problem in host mode for the MUSB chipset. Add missed TXPKTRDY check.
  • From: Greg KH <greg@xxxxxxxxx>
• RE: [PATCH] Workaround for hardware problem in host mode for the MUSB chipset. Add missed TXPKTRDY check.
  • From: Hans Petter SELASKY <hans.petter.selasky@xxxxxxxxxxxxxx>
• RE: [PATCH] Workaround for hardware problem in host mode for the MUSB chipset. Add missed TXPKTRDY check.
  • From: Hans Petter SELASKY <hans.petter.selasky@xxxxxxxxxxxxxx>
• Re: [PATCH] Workaround for hardware problem in host mode for the MUSB chipset. Add missed TXPKTRDY check.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: [PATCH] musb: Change to direct addr in conext suspend/resume
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH] USB: ssu100: set tty_flags in ssu100_process_packet
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• EHCI fails for me with "devpath 8 ep2in 3 strikes"
  • From: Dennis Nezic <dennisn@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3 V2] Add support for UC-Logic WP????U tablets
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCHv8 04/13] USB: gadget: mass_storage: moved strings handling code to composite
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: kl5kusb105 driver
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH] Workaround for hardware problem in host mode for the MUSB chipset. Add missed TXPKTRDY check.
  • From: Greg KH <greg@xxxxxxxxx>
• RE: FW: [PATCH v3] usb: musb: do not use dma for control transfers
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: FW: [PATCH v3] usb: musb: do not use dma for control transfers
  • From: Praveena Nadahally <praveen.nadahally@xxxxxxxxxxxxxx>
• Re: resending patch to retry reset in case it failed
  • From: Ville Tervo <ville.tervo@xxxxxx>
• [PATCH] USB: ssu100: set tty_flags in ssu100_process_packet
  • From: Bill Pemberton <wfp5p@xxxxxxxxxxxx>
• Re: resending patch to retry reset in case it failed
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 3/3 V2] Add support for UC-Logic WP????U tablets
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: Oliver Neukum <oneukum@xxxxxxx>
• RE: [PATCH 7/8] : Hwmod api changes
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: USB memory stick has &amp;amp;quot;end_request: I/O error....&amp;amp;quot;
  • From: jimmy jiang <jiangyuqing@xxxxxxxxxxx>
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] USB: Gadget: g_multi: added INF file for gadget with multiple configurations
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: [PATCH 3/3] usb/otg/ulpi: extend the generic ulpi driver.
  • From: Heikki Krogerus <krohei@xxxxxxxxx>
• Re: resending patch to retry reset in case it failed
  • From: Ville Tervo <ville.tervo@xxxxxx>
• Re: [patch] usb/serial/ssu100: uninitialized variable
  • From: wfp5p@xxxxxxxxxxxxxxxxxxxxxxxxx (Bill Pemberton)
• [patch] usb/serial/ssu100: uninitialized variable
  • From: Dan Carpenter <error27@xxxxxxxxx>
• [PATCH] Workaround for hardware problem in host mode for the MUSB chipset. Add missed TXPKTRDY check.
  • From: Praveena Nadahally <praveen.nadahally@xxxxxxxxxxxxxx>
• [PATCH v2] ARM: imx: fix build failure concerning otg/ulpi
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH RESEND] USB HID: Add ID for eGalax Multitouch used in JooJoo tablet
  • From: Stéphane Chatty <chatty@xxxxxxx>
• Re: [PATCH] ARM: imx: fix build failure concerning otg/ulpi
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH] ARM: imx: fix build failure concerning otg/ulpi
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] musb: Change to direct addr in conext suspend/resume
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• [PATCH] USB: Gadget: g_multi: added INF file for gadget with multiple configurations
  • From: Dries Van Puymbroeck <dries.van.puymbroeck@xxxxxxxxx>
• Re: [PATCH RESEND] USB HID: Protect against disconnect/NULL-dereference race
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH RESEND] USB HID: Protect against disconnect/NULL-dereference race
  • From: Amit Nagal <helloin.amit@xxxxxxxxx>
• Re: lsusb -t doesn't always work with 2.6.35
  • From: Andrey Rahmatullin <wrar@xxxxxxxxxxxx>
• Re: usb core limit the transfer to one page, which leads to slow transfer for usb DFU
  • From: Yuping Luo <lypingsh@xxxxxxxxx>
• Re: USB memory stick has &amp;quot;end_request: I/O error....&amp;quot;
  • From: Yuping Luo <lypingsh@xxxxxxxxx>
• Re: usb core limit the transfer to one page, which leads to slow transfer for usb DFU
  • From: Greg KH <greg@xxxxxxxxx>
• Re: usb core limit the transfer to one page, which leads to slow transfer for usb DFU
  • From: Yuping Luo <lypingsh@xxxxxxxxx>
• Re: [PATCH] musb: Change to direct addr in conext suspend/resume
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• Re: [PATCH 0/4 v5] xHCI: PM patchset
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: Greg KH <greg@xxxxxxxxx>
• Re: usb core limit the transfer to one page, which leads to slow transfer for usb DFU
  • From: Greg KH <greg@xxxxxxxxx>
• Re: lsusb -t doesn't always work with 2.6.35
  • From: Greg KH <greg@xxxxxxxxx>
• usbutils 0.90 release
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH RESEND] USB HID: Add ID for eGalax Multitouch used in JooJoo tablet
  • From: Jiri Kosina <jkosina@xxxxxxx>
• [PATCH RESEND] USB HID: Add ID for eGalax Multitouch used in JooJoo tablet
  • From: Chris Ball <cjb@xxxxxxxxxx>
• [PATCH RESEND] USB HID: Protect against disconnect/NULL-dereference race
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [PATCH] lsusb: fix iFeature position calculation for UAC2 feature units
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCHv8 04/13] USB: gadget: mass_storage: moved strings handling code to composite
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: USB: EHCI Debug Port Device Gadget
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: USB memory stick has &amp;amp;quot;end_request: I/O error....&amp;amp;quot;
  • From: jimmy jiang <jiangyuqing@xxxxxxxxxxx>
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: [PATCH 027/148] USB: Add a serial number parameter to g_file_storage module
  • From: Greg KH <gregkh@xxxxxxx>
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Heinz Diehl <htd@xxxxxxxxxx>
• Re: USB memory stick has &amp;quot;end_request: I/O error....&amp;quot;
  • From: Greg KH <greg@xxxxxxxxx>
• Re: USB memory stick has &quot;end_request: I/O error....&quot;
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Heinz Diehl <htd@xxxxxxxxxx>
• Re: USB memory stick has &amp;quot;end_request: I/O error....&amp;quot;
  • From: jimmy jiang <jiangyuqing@xxxxxxxxxxx>
• Re: [PATCHv8 13/13] init.h: add some more documentation to __ref* tags
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCHv8 11/13] usb gadget: don't save bind callback in struct usb_composite_driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCHv8 02/13] USB: gadget: g_ffs: fixed vendor and product ID
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv8 06/13] USB: gadget: g_multi: moved strings handling code to composite
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv8 07/13] usb: gadget: storage: remove nofua file when unbinding
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv8 04/13] USB: gadget: mass_storage: moved strings handling code to composite
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv8 08/13] usb: gadget: mass_storage: optional SCSI WRITE FUA bit
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv8 05/13] USB: gadget: functionfs: code cleanup
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv8 10/13] usb gadget: don't save bind callback in struct usb_gadget_driver
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv8 12/13] usb gadget: don't save bind callback in struct usb_configuration
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv8 09/13] Revert "USB: gadget: section mismatch warning fixed"
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv8 11/13] usb gadget: don't save bind callback in struct usb_composite_driver
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv8 13/13] init.h: add some more documentation to __ref* tags
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv8 03/13] USB: gadget: composite: Better string override handling
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv8 01/13] USB: gadget: g_multi: fixed vendor and product ID
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• [PATCHv8 00/13] Various USB improvements
  • From: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: USB memory stick has &quot;end_request: I/O error....&quot;
  • From: jimmy jiang <jiangyuqing@xxxxxxxxxxx>
• Re: lsusb -t doesn't always work with 2.6.35
  • From: Andrey Rahmatullin <wrar@xxxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Dave Mielke <dave@xxxxxxxxx>
• Re: lsusb -t doesn't always work with 2.6.35
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Markus Trippelsdorf <markus@xxxxxxxxxxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Alan Ott <alan@xxxxxxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Alan Ott <alan@xxxxxxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Markus Trippelsdorf <markus@xxxxxxxxxxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: resending patch to retry reset in case it failed
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH 027/148] USB: Add a serial number parameter to g_file_storage module
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Markus Trippelsdorf <markus@xxxxxxxxxxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Jiri Kosina <jkosina@xxxxxxx>
• lsusb -t doesn't always work with 2.6.35
  • From: Andrey Rahmatullin <wrar@xxxxxxxxxxxx>
• usb core limit the transfer to one page, which leads to slow transfer for usb DFU
  • From: Yuping Luo <lypingsh@xxxxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Markus Trippelsdorf <markus@xxxxxxxxxxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Markus Trippelsdorf <markus@xxxxxxxxxxxxxxx>
• Re: [PATCHv7 8/8] usb: gadget: mass_storage: optional SCSI WRITE FUA bit
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCHv7 7/8] usb: gadget: storage: remove nofua file when unbinding
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Alan Ott <alan@xxxxxxxxxxx>
• Re: resending patch to retry reset in case it failed
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Alan Ott <alan@xxxxxxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: USB memory stick has "end_request: I/O error...."
  • From: Maulik Mankad <mankad.maulik@xxxxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Markus Trippelsdorf <markus@xxxxxxxxxxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [patch] usb/uvc_v4l2: cleanup test for end of loop
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [patch] usb/uvc_v4l2: cleanup test for end of loop
  • From: Dan Carpenter <error27@xxxxxxxxx>
• resending patch to retry reset in case it failed
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [patch] dbgp: cleanup: remove unneeded check
  • From: Dan Carpenter <error27@xxxxxxxxx>
• Re: Problem with STM8S Discovery kit
  • From: Vaclav Peroutka <vaclavpe@xxxxxxxxx>
• Re: PROBLEM: HIDRAW: /dev/hidraw* device does not get removed when unplugged
  • From: Alan Ott <alan@xxxxxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [2.6.35] usb 2.0 em28xx kernel panic general protection fault: 0000 [#1] SMP RIP: 0010:[<ffffffffa004fbc5>] [<ffffffffa004fbc5>] em28xx_isoc_copy_vbi+0x62e/0x812 [em28xx]
  • From: Andy Walls <awalls@xxxxxxxxxxxxxxxx>
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• Re: [2.6.35] usb 2.0 em28xx kernel panic general protection fault: 0000 [#1] SMP RIP: 0010:[<ffffffffa004fbc5>] [<ffffffffa004fbc5>] em28xx_isoc_copy_vbi+0x62e/0x812 [em28xx]
  • From: Sander Eikelenboom <linux@xxxxxxxxxxxxxx>
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: Greg KH <greg@xxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Dave Mielke <dave@xxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH] usb/gadget: fix composite kernel-doc warnings
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• USB memory stick has "end_request: I/O error...."
  • From: jimmy jiang <jiangyuqing@xxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Dave Mielke <dave@xxxxxxxxx>
• Re: [2.6.35] usb 2.0 em28xx kernel panic general protection fault: 0000 [#1] SMP RIP: 0010:[<ffffffffa004fbc5>] [<ffffffffa004fbc5>] em28xx_isoc_copy_vbi+0x62e/0x812 [em28xx]
  • From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: Greg KH <greg@xxxxxxxxx>
• RE: [alsa-devel] [PATCH] sound: usb: USB3 Super Speed patch
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: [PATCH] sound: usb: USB3 Super Speed patch
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Dave Mielke <dave@xxxxxxxxx>
• Re: [PATCH 0/4 v5] xHCI: PM patchset
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [2.6.35] usb 2.0 em28xx kernel panic general protection fault: 0000 [#1] SMP RIP: 0010:[<ffffffffa004fbc5>] [<ffffffffa004fbc5>] em28xx_isoc_copy_vbi+0x62e/0x812 [em28xx]
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• Re: [2.6.35] usb 2.0 em28xx kernel panic general protection fault: 0000 [#1] SMP RIP: 0010:[<ffffffffa004fbc5>] [<ffffffffa004fbc5>] em28xx_isoc_copy_vbi+0x62e/0x812 [em28xx]
  • From: Pete Eberlein <pete@xxxxxxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] lsusb: fix iFeature position calculation for UAC2 feature units
  • From: Greg KH <gregkh@xxxxxxx>
• Re: PROBLEM: HIDRAW: /dev/hidraw* device does not get removed when unplugged
  • From: Alan Ott <alan@xxxxxxxxxxx>
• Re: PROBLEM: HIDRAW: /dev/hidraw* device does not get removed when unplugged
  • From: Jiri Kosina <jkosina@xxxxxxx>
• PROBLEM: HIDRAW: /dev/hidraw* device does not get removed when unplugged
  • From: Alan Ott <alan@xxxxxxxxxxx>
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Problem with STM8S Discovery kit
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 005/148] USB: speedtouch: fixed brace and spacing coding style issues
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 005/148] USB: speedtouch: fixed brace and spacing coding style issues
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: xhci_hcd ERROR no room on ep ring, xhci_hcd WARN Event TRB for slot 1 ep 4 with no TDs queued?
  • From: Sander Eikelenboom <linux@xxxxxxxxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH resend] MUSB: make DBG() calls actually depend on CONFIG_USB_MUSB_DEBUG
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• Re: [PATCH 8/8 ]usb : musb:Using runtime pm apis for musb.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH RFC v9] MUSB: DA8xx/OMAP-L1x glue layer
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Problem with STM8S Discovery kit
  • From: Vaclav Peroutka <vaclavpe@xxxxxxxxx>
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• [PATCH 1/5] drivers/usb/gadget: Return -ENOMEM on memory allocation failure
  • From: Julia Lawall <julia@xxxxxxx>
• RE: [PATCH 0/4 v5] xHCI: PM patchset
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• [PATCH] usb: otg: twl4030: fix wrong assumption of starting state
  • From: felipe.balbi@xxxxxxxxx
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: Problem with non aligned DMA in usbnet on ARM
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Problem with non aligned DMA in usbnet on ARM
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• RE: xhci_hcd ERROR no room on ep ring, xhci_hcd WARN Event TRB for slot 1 ep 4 with no TDs queued?
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• Re: [alsa-devel] [PATCH] sound: usb: USB3 Super Speed patch
  • From: Daniel Mack <daniel@xxxxxxxx>
• Re: [alsa-devel] [PATCH] sound: usb: USB3 Super Speed patch
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [ANNOUNCE] USBDescriptorKitchen
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: [alsa-devel] [PATCH] sound: usb: USB3 Super Speed patch
  • From: Daniel Mack <daniel@xxxxxxxx>
• Re: [2.6.35] usb 2.0 em28xx kernel panic general protection fault: 0000 [#1] SMP RIP: 0010:[<ffffffffa004fbc5>] [<ffffffffa004fbc5>] em28xx_isoc_copy_vbi+0x62e/0x812 [em28xx]
  • From: Sander Eikelenboom <linux@xxxxxxxxxxxxxx>
• Re: [PATCH] sound: usb: USB3 Super Speed patch
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Re: [PATCH] lsusb: fix iFeature position calculation for UAC2 feature units
  • From: Daniel Mack <daniel@xxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [2.6.35] usb 2.0 em28xx kernel panic general protection fault: 0000 [#1] SMP RIP: 0010:[<ffffffffa004fbc5>] [<ffffffffa004fbc5>] em28xx_isoc_copy_vbi+0x62e/0x812 [em28xx]
  • From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
• [PATCH] sound: usb: USB3 Super Speed patch
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: Problem when USB hub is inserted
  • From: Alessio Sangalli <alesan@xxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Dave Mielke <dave@xxxxxxxxx>
• Re: Query - resetting and reenumerating root-hub
  • From: Tim Harvey <harvey.tim@xxxxxxxxx>
• Re: [PATCH RFC v9] MUSB: DA8xx/OMAP-L1x glue layer
  • From: Greg KH <gregkh@xxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Support For Magiccard's ENDURA Card printer support.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Application for CBA-III (West Mountain Radio)
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [2.6.35] usb 2.0 em28xx kernel panic general protection fault: 0000 [#1] SMP RIP: 0010:[<ffffffffa004fbc5>] [<ffffffffa004fbc5>] em28xx_isoc_copy_vbi+0x62e/0x812 [em28xx]
  • From: Sander Eikelenboom <linux@xxxxxxxxxxxxxx>
• Re: [PATCH 027/148] USB: Add a serial number parameter to g_file_storage module
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [2.6.35] usb 2.0 em28xx kernel panic general protection fault: 0000 [#1] SMP RIP: 0010:[<ffffffffa004fbc5>] [<ffffffffa004fbc5>] em28xx_isoc_copy_vbi+0x62e/0x812 [em28xx]
  • From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
• Re: [BUG] object: is not initialized, yet kobject_put() is being called
  • From: Markus Trippelsdorf <markus@xxxxxxxxxxxxxxx>
• Re: xhci_hcd ERROR no room on ep ring, xhci_hcd WARN Event TRB for slot 1 ep 4 with no TDs queued?
  • From: Sander Eikelenboom <linux@xxxxxxxxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: Greg KH <greg@xxxxxxxxx>
• [2.6.35] usb 2.0 em28xx kernel panic general protection fault: 0000 [#1] SMP RIP: 0010:[<ffffffffa004fbc5>] [<ffffffffa004fbc5>] em28xx_isoc_copy_vbi+0x62e/0x812 [em28xx]
  • From: Sander Eikelenboom <linux@xxxxxxxxxxxxxx>
• Re: [patch 2/6] scsi/sr: add no_read_disc_info scsi_device flag
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH 020/148] USB: EHCI: EHCI 1.1 addendum: preparation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 024/148] Revert "USB: Adding support for HTC Smartphones to ipaq"
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 022/148] USB: EHCI: EHCI 1.1 addendum: Enable Per-port change detect bits
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 019/148] usb: throw away custom hex digit methods
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 026/148] usb: conexant: fixed spacing and brace coding style issues
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 021/148] USB: EHCI: EHCI 1.1 addendum: Basic LPM feature support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 025/148] USB: gadget: langwell_udc.c: printk needs a (unsigned long long) cast for a dma_t
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 034/148] USB: mon: kill BKL usage
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 044/148] USB: gadget: g_multi: added documentation and INF files
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 041/148] USB: gadget: g_multi: code clean up and refactoring
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 053/148] USB: controller resume should check the root hub
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 042/148] USB: gadget: g_ether: updated INF file
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 060/148] USB: EHCI: fix NULL pointer dererence in HCDs that use HCD_LOCAL_MEM
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 047/148] USB: gadget: section mismatch warning fixed
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 106/148] USB: gadget: storage: optional SCSI WRITE FUA bit
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 068/148] USB: ehci_omap: fix device detect issue with modules
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 081/148] USB: otg/ulpi.c : fix register write
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 069/148] USB: musb: Kill board specific pinmux from driver file
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 078/148] USB: serial: enable async suspend for usb serial port device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 067/148] USB: ulpi: fix compilation warning
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 094/148] USB: option: Huawei ETS 1220 support added
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 103/148] USB: xHCI: allocate bigger ring for isochronous endpoint
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 110/148] USB: s3c-hsotg: Avoid overwriting contents of perodic in 'fifo'
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 116/148] USB: s3c-hsotg: Fix the OUT EP0 limit
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 109/148] USB: s3c-hsotg: The NPTX/PTX FIFO sizes are in words, not bytes
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 114/148] USB: s3c-hsotg: Check for new request before enqueing new setup
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 130/148] USB: ehci: fix remove of ehci debugfs dir
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 133/148] USB:: fix linux/usb.h kernel-doc warnings
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 132/148] USB: add USB serial ssu100 driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 148/148] USB: serial: fix stalled writes
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 147/148] USB: remove fake "address-of" expressions
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 146/148] USB: fix thread-unsafe anchor utiliy routines
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 144/148] USB: usbtest: avoid to free coherent buffer in atomic context
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 145/148] USB: usbtest: support test device with only one iso-in or iso-out endpoint
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 143/148] USB: xhci: Set DMA mask for host.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 142/148] USB: xhci: Don't flush doorbell writes.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 138/148] USB: xhci: Make xhci_handle_event() static.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 140/148] USB: xhci: Make xhci_set_hc_event_deq() static.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 141/148] USB: xhci: Reduce reads and writes of interrupter registers.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 139/148] USB: xhci: Minimize HW event ring dequeue pointer writes.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 137/148] USB: xhci: Remove unnecessary reads of IRQ_PENDING register.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 136/148] USB: xhci: Performance - move xhci_work() into xhci_irq()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 135/148] USB: xhci: Performance - move interrupt handlers into xhci-ring.c
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 122/148] USB: serial: enabling support for Segway RMP in ftdi_sio
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 134/148] USB: xhci: Performance - move functions that find ep ring.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>