Re: [PATCH] ARM: imx: fix build failure concerning otg/ulpi

[Sergei Shtylyov <sshtylyov@xxxxxxxxxx>]

Hello.

Uwe Kleine-König wrote:

> The build failure was introduced by
>
> 	13dd0c9 (USB: otg/ulpi: extend the generic ulpi driver.)

> Cc: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
> Cc: Mike Rapoport <mike@xxxxxxxxxxxxxx>
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxx>

   Signoff is missing.


> diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
> index 575ff1a..339150a 100644
> --- a/arch/arm/mach-imx/mach-cpuimx27.c
> +++ b/arch/arm/mach-imx/mach-cpuimx27.c
> @@ -279,13 +279,13 @@ static void __init eukrea_cpuimx27_init(void)
>  #if defined(CONFIG_USB_ULPI)
>  	if (otg_mode_host) {
>  		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
> -				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
> +				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
>  
>  		mxc_register_device(&mxc_otg_host, &otg_pdata);
>  	}
>  
>  	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
> -				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
> +				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
>  
>  	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
>  #endif
> diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
> index a389d11..23c9e1f 100644
> --- a/arch/arm/mach-imx/mach-pca100.c
> +++ b/arch/arm/mach-imx/mach-pca100.c
> @@ -419,13 +419,13 @@ static void __init pca100_init(void)
>  #if defined(CONFIG_USB_ULPI)
>  	if (otg_mode_host) {
>  		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
> -				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
> +				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
>  
>  		mxc_register_device(&mxc_otg_host, &otg_pdata);
>  	}
>  
>  	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
> -				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
> +				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
>  
>  	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
>  #endif
> diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c
> index 56b2e26..0134fb8 100644
> --- a/arch/arm/mach-mx25/mach-cpuimx25.c
> +++ b/arch/arm/mach-mx25/mach-cpuimx25.c
> @@ -138,7 +138,7 @@ static void __init eukrea_cpuimx25_init(void)
>  #if defined(CONFIG_USB_ULPI)
>  	if (otg_mode_host) {
>  		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
> -				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
> +				USB_OTG_DRV_VBUS | ULPI_OTG_DRVVBUS_EXT);

   Not ULPI_OTG_DRVVBUS, like in other cases?

>  
>  		mxc_register_device(&mxc_otg, &otg_pdata);
>  	}
> diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
> index 63f970f..117f90e 100644
> --- a/arch/arm/mach-mx3/mach-cpuimx35.c
> +++ b/arch/arm/mach-mx3/mach-cpuimx35.c
> @@ -192,7 +192,7 @@ static void __init mxc_board_init(void)
>  #if defined(CONFIG_USB_ULPI)
>  	if (otg_mode_host) {
>  		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
> -				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
> +				USB_OTG_DRV_VBUS | ULPI_OTG_DRVVBUS_EXT);

   Same question here...

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html