From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
When we move xhci_work() into xhci_irq(), we don't need to read the operational
register status field twice.
Signed-off-by: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/usb/host/xhci-ring.c | 73 +++++++++++++++++------------------------
1 files changed, 30 insertions(+), 43 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 4b50a02..f9c08d2 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2030,48 +2030,6 @@ void xhci_handle_event(struct xhci_hcd *xhci)
/* Are there more items on the event ring? */
xhci_handle_event(xhci);
}
-/*
- * Called in interrupt context when there might be work
- * queued on the event ring
- *
- * xhci->lock must be held by caller.
- */
-static void xhci_work(struct xhci_hcd *xhci)
-{
- u32 temp;
- u64 temp_64;
-
- /*
- * Clear the op reg interrupt status first,
- * so we can receive interrupts from other MSI-X interrupters.
- * Write 1 to clear the interrupt status.
- */
- temp = xhci_readl(xhci, &xhci->op_regs->status);
- temp |= STS_EINT;
- xhci_writel(xhci, temp, &xhci->op_regs->status);
- /* FIXME when MSI-X is supported and there are multiple vectors */
- /* Clear the MSI-X event interrupt status */
-
- /* Acknowledge the interrupt */
- temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
- temp |= 0x3;
- xhci_writel(xhci, temp, &xhci->ir_set->irq_pending);
-
- if (xhci->xhc_state & XHCI_STATE_DYING)
- xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
- "Shouldn't IRQs be disabled?\n");
- else
- /* FIXME this should be a delayed service routine
- * that clears the EHB.
- */
- xhci_handle_event(xhci);
-
- /* Clear the event handler busy flag (RW1C); event ring is empty. */
- temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
- xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
- /* Flush posted writes -- FIXME is this necessary? */
- xhci_readl(xhci, &xhci->ir_set->irq_pending);
-}
/*
* xHCI spec says we can get an interrupt, and if the HC has an error condition,
@@ -2083,6 +2041,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
u32 temp, temp2;
union xhci_trb *trb;
+ u64 temp_64;
spin_lock(&xhci->lock);
trb = xhci->event_ring->dequeue;
@@ -2117,7 +2076,35 @@ hw_died:
return -ESHUTDOWN;
}
- xhci_work(xhci);
+ /*
+ * Clear the op reg interrupt status first,
+ * so we can receive interrupts from other MSI-X interrupters.
+ * Write 1 to clear the interrupt status.
+ */
+ temp |= STS_EINT;
+ xhci_writel(xhci, temp, &xhci->op_regs->status);
+ /* FIXME when MSI-X is supported and there are multiple vectors */
+ /* Clear the MSI-X event interrupt status */
+
+ /* Acknowledge the interrupt */
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ temp |= 0x3;
+ xhci_writel(xhci, temp, &xhci->ir_set->irq_pending);
+
+ if (xhci->xhc_state & XHCI_STATE_DYING)
+ xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
+ "Shouldn't IRQs be disabled?\n");
+ else
+ /* FIXME this should be a delayed service routine
+ * that clears the EHB.
+ */
+ xhci_handle_event(xhci);
+
+ /* Clear the event handler busy flag (RW1C); event ring is empty. */
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
+ /* Flush posted writes -- FIXME is this necessary? */
+ xhci_readl(xhci, &xhci->ir_set->irq_pending);
spin_unlock(&xhci->lock);
return IRQ_HANDLED;
--
1.7.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
