Hi, Jiri wrote: > has this patch been really tested? > > I am almost certain that we need to have the device ID to be added to > hid_blacklist[] in drivers/hid/hid-core.c as well. Otherwise the > hid-egalax driver wouldn't bind to the device automatically in a > proper way. Thanks for noticing that; you're right, it's necessary. I only tested CONFIG_HID_EGALAX=y, which doesn't seem to require the blacklist entry. I've tested that using the blacklist with =m works now. Stéphane wrote: > My suggestions: > - accept the patch, after adding a few comments in the code about > this device requiring future care for its 'serial' protocol. > - start thinking about what changes are required in hid-input and/ > or hid-core for a more generic management of multitouch devices. I've added a comment, feel free to reword it if you'd like to. Thanks for the excellent research! From: Chris Ball <cjb@xxxxxxxxxx> Subject: [PATCH] USB HID: Add ID for eGalax Multitouch used in JooJoo tablet MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit The JooJoo tablet (http://thejoojoo.com/) contains an "eGalax Inc. USB TouchController", and this patch hooks it up to the egalax-touch driver. Without the patch we don't get any cursor motion, since it comes through Z/RX rather than X/Y. (The egalax-touch driver does not yet generate a correct event sequence for the "serial" protocol used by this device, though -- see the note added to the code, which comes from research by Stéphane Chatty.) Cc: Jiri Kosina <jkosina@xxxxxxx> Cc: Stéphane Chatty <chatty@xxxxxxx> Signed-off-by: Chris Ball <cjb@xxxxxxxxxx> --- drivers/hid/hid-core.c | 1 + drivers/hid/hid-egalax.c | 9 +++++++++ drivers/hid/hid-ids.h | 1 + 3 files changed, 11 insertions(+), 0 deletions(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index e635199..0c52899 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1299,6 +1299,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) }, { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) }, { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) }, diff --git a/drivers/hid/hid-egalax.c b/drivers/hid/hid-egalax.c index f44bdc0..a852e31 100644 --- a/drivers/hid/hid-egalax.c +++ b/drivers/hid/hid-egalax.c @@ -159,6 +159,13 @@ static int egalax_event(struct hid_device *hid, struct hid_field *field, { struct egalax_data *td = hid_get_drvdata(hid); + /* Note, eGalax has two product lines: the first is resistive and + * uses a standard parallel multitouch protocol (product ID == + * 48xx). The second is capacitive and uses an unusual "serial" + * protocol with a different message for each multitouch finger + * (product ID == 72xx). We do not yet generate a correct event + * sequence for the capacitive/serial protocol. + */ if (hid->claimed & HID_CLAIMED_INPUT) { struct input_dev *input = field->hidinput->input; @@ -246,6 +253,8 @@ static void egalax_remove(struct hid_device *hdev) static const struct hid_device_id egalax_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, + USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) }, { } }; MODULE_DEVICE_TABLE(hid, egalax_devices); diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index d3fc13a..85c6d13 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -188,6 +188,7 @@ #define USB_VENDOR_ID_DWAV 0x0eef #define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER 0x0001 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH 0x480d +#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1 0x720c #define USB_VENDOR_ID_ELECOM 0x056e #define USB_DEVICE_ID_ELECOM_BM084 0x0061 -- 1.6.2.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
