>From dbf0a2ff9050f627a29b5d59e78db7d221e76ba2 Mon Sep 17 00:00:00 2001
From: Andiry Xu <andiry.xu@xxxxxxx>
Date: Tue, 17 Aug 2010 15:10:56 +0800
Subject: [PATCH 2/2] usbcore: use kernel assigned address for devices under xHCI
xHCI driver uses hardware assigned device address. This may cause device
address conflict in certain cases.
Use kernel assigned address for devices under xHCI. Store the xHC assigned
address locally in xHCI driver.
Signed-off-by: Andiry Xu <andiry.xu@xxxxxxx>
---
drivers/usb/core/hub.c | 27 +++++++++++++--------------
drivers/usb/host/xhci.c | 8 ++++----
drivers/usb/host/xhci.h | 2 ++
3 files changed, 19 insertions(+), 18 deletions(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index d552c50..4ab5982 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2595,16 +2595,14 @@ static int hub_set_address(struct usb_device *udev, int devnum)
return 0;
if (udev->state != USB_STATE_DEFAULT)
return -EINVAL;
- if (hcd->driver->address_device) {
+ if (hcd->driver->address_device)
retval = hcd->driver->address_device(hcd, udev);
- } else {
+ else
retval = usb_control_msg(udev, usb_sndaddr0pipe(),
USB_REQ_SET_ADDRESS, 0, devnum, 0,
NULL, 0, USB_CTRL_SET_TIMEOUT);
- if (retval == 0)
- update_address(udev, devnum);
- }
if (retval == 0) {
+ update_address(udev, devnum);
/* Device now using proper address. */
usb_set_device_state(udev, USB_STATE_ADDRESS);
usb_ep0_reinit(udev);
@@ -3096,16 +3094,17 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
udev->speed = USB_SPEED_UNKNOWN;
/*
- * xHCI needs to issue an address device command later
- * in the hub_port_init sequence for SS/HS/FS/LS devices.
+ * Set the address.
+ * Note xHCI needs to issue an address device command later
+ * in the hub_port_init sequence for SS/HS/FS/LS devices,
+ * and xHC will assign an address to the device. But use
+ * kernel assigned address here, to avoid any address conflict
+ * issue.
*/
- if (!(hcd->driver->flags & HCD_USB3)) {
- /* set the address */
- choose_address(udev);
- if (udev->devnum <= 0) {
- status = -ENOTCONN; /* Don't retry */
- goto loop;
- }
+ choose_address(udev);
+ if (udev->devnum <= 0) {
+ status = -ENOTCONN; /* Don't retry */
+ goto loop;
}
/* reset (non-USB 3.0 devices) and get descriptor */
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index c22d339..2bbd45e 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2576,15 +2576,15 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
* address given back to us by the HC.
*/
slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
- udev->devnum = (slot_ctx->dev_state & DEV_ADDR_MASK) + 1;
+ /* Use kernel assigned address for devices; store xHC assigned
+ * address locally. */
+ virt_dev->address = (slot_ctx->dev_state & DEV_ADDR_MASK) + 1;
/* Zero the input context control for later use */
ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
ctrl_ctx->add_flags = 0;
ctrl_ctx->drop_flags = 0;
- xhci_dbg(xhci, "Device address = %d\n", udev->devnum);
- /* XXX Meh, not sure if anyone else but choose_address uses this. */
- set_bit(udev->devnum, udev->bus->devmap.devicemap);
+ xhci_dbg(xhci, "Internal device address = %d\n", virt_dev->address);
return 0;
}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 4415ce2..ae80b4f 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -755,6 +755,8 @@ struct xhci_virt_device {
int num_rings_cached;
/* Indicate whether the device is configured */
bool configured;
+ /* Store xHC assigned device address */
+ int address;
#define XHCI_MAX_RINGS_CACHED 31
struct xhci_virt_ep eps[31];
struct completion cmd_completion;
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
