Linux USB Users

• Thread Index

• debugging oops after disconnecting Nexio USB touchscreen
  • From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: Jan Kara <jack@xxxxxxx>
• Re: [PATCH] Add support for Mobilcom Debitel USB UMTS Surf-Stick to option driver
  • From: Gernot Hillier <gernot@xxxxxxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Stephan Diestelhorst <stephan.diestelhorst@xxxxxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Stephan Diestelhorst <stephan.diestelhorst@xxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: tmhikaru@xxxxxxxxx
• RE: [PATCH RFC 1/2] MUSB: CPPI 4.1 DMA driver (take 4)
  • From: "Subbrathnam, Swaminathan" <swami.iyer@xxxxxx>
• Re: [PATCH RFC 1/2] MUSB: CPPI 4.1 DMA driver (take 4)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: Attaching MEGAWIN USB Bridge with USB generic driver
  • From: Marian <frighty@xxxxxxx>
• Re: [patch]unbalanced calls to post_reset() from usb_reset_device()
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Changes to USB runtime PM
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Changes to USB runtime PM
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [patch]unbalanced calls to post_reset() from usb_reset_device()
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [patch]unbalanced calls to post_reset() from usb_reset_device()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Attaching MEGAWIN USB Bridge with USB generic driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Aw: Re: device descriptor not sent correctly (somehow solved)
  • From: Ivan Braginski <ivan.braginski@xxxxxxxx>
• RE: [PATCH 1/2 v2] musb: Add context save and restore support
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Attaching MEGAWIN USB Bridge with USB generic driver
  • From: Marian <frighty@xxxxxxx>
• RE: [PATCH 1/2 v2] musb: Add context save and restore support
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 1/2 v2] musb: Add context save and restore support
  • From: Romit Dasgupta <romit@xxxxxx>
• Re: DaVinci MUSB controller with CPPI DMA
  • From: vkm <viral.vkm@xxxxxxxxx>
• RE: DaVinci MUSB controller with CPPI DMA
  • From: "Subbrathnam, Swaminathan" <swami.iyer@xxxxxx>
• Re: basic doubt on root hubs (on an embedded SoC)
  • From: Mandeep Sandhu <mandeepsandhu.chd@xxxxxxxxx>
• Re: [solved] HUAWEI E220, connection problems.
  • From: Alexey Fisher <bug-track@xxxxxxxxxxxxxxxxx>
• R: basic doubt on root hubs (on an embedded SoC)
  • From: Salvatore Lionetti <salvatorelionetti@xxxxxxxx>
• [PATCH 1/2 v2] musb: Add context save and restore support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• Re: Kernel Oops on Unexpected Disconnect of /dev/ttyUSBx Device
  • From: Greg KH <gregkh@xxxxxxx>
• Re: DaVinci MUSB controller with CPPI DMA
  • From: Greg KH <greg@xxxxxxxxx>
• Re: DaVinci MUSB controller with CPPI DMA
  • From: vkm <viral.vkm@xxxxxxxxx>
• Re: Faking usb autosuspend out for uvc and cdc_acm
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Faking usb autosuspend out for uvc and cdc_acm
  • From: "Joey Lee" <jlee@xxxxxxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Stephan Diestelhorst <stephan.diestelhorst@xxxxxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Stephan Diestelhorst <stephan.diestelhorst@xxxxxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Stephan Diestelhorst <langer_mann@xxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Stephan Diestelhorst <langer_mann@xxxxxx>
• Re: Faking usb autosuspend out for uvc and cdc_acm
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Stephan Diestelhorst <stephan.diestelhorst@xxxxxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Faking usb autosuspend out for uvc and cdc_acm
  • From: Greg KH <greg@xxxxxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Stephan Diestelhorst <stephan.diestelhorst@xxxxxxxxx>
• Re: Kernel Oops on Unexpected Disconnect of /dev/ttyUSBx Device
  • From: Greg KH <gregkh@xxxxxxx>
• [PATCH 3/3] [resend] usbtouchscreen: add NEXIO (or iNexio) support
  • From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] [resend] usbtouchscreen: find input endpoint automatically
  • From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] [resend] usbtouchscreen: convert from usb_device to usb_interface
  • From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
• RE: Kernel Oops on Unexpected Disconnect of /dev/ttyUSBx Device
  • From: Rory Filer <rfiler@xxxxxxxxxxxxxxxxxx>
• [rft]basic power management methods for usbtouch
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: additional debug output for autosuspend in cdc-ether
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Error after calling usb_unlink_urb
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Kernel Oops on Unexpected Disconnect of /dev/ttyUSBx Device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Kernel Oops on Unexpected Disconnect of /dev/ttyUSBx Device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [solved] HUAWEI E220, connection problems.
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: Purpose of parameter in sysfs binary read
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: Purpose of parameter in sysfs binary read
  • From: "Rick L. Vinyard, Jr." <rvinyard@xxxxxxxxxxx>
• Re: Kernel Oops on Unexpected Disconnect of /dev/ttyUSBx Device
  • From: Greg KH <gregkh@xxxxxxx>
• Re: additional debug output for autosuspend in cdc-ether
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Kernel Oops on Unexpected Disconnect of /dev/ttyUSBx Device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci-omap: Update platform header file path
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: ehci-omap: Update platform header file path
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: additional debug output for autosuspend in cdc-ether
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [patch]USB autosuspend for cdc-ether
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [patch]unbalanced calls to post_reset() from usb_reset_device()
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: unbalanced calls to post_reset() from usb_reset_device()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: additional debug output for autosuspend in cdc-ether
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: additional debug output for autosuspend in cdc-ether
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: additional debug output for autosuspend in cdc-ether
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• RE: Gadget serial and cable detection (in user mode)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: additional debug output for autosuspend in cdc-ether
  • From: Rickard Bellini <rickard.bellini@xxxxxxxxxxxx>
• Re: [patch]USB autosuspend for cdc-ether
  • From: Steve.Glendinning@xxxxxxxx
• Re: DaVinci MUSB controller with CPPI DMA
  • From: Greg KH <greg@xxxxxxxxx>
• Re: basic doubt on root hubs (on an embedded SoC)
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: ehci-omap: Update platform header file path
  • From: Greg KH <gregkh@xxxxxxx>
• Re: basic doubt on root hubs (on an embedded SoC)
  • From: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: tmhikaru@xxxxxxxxx
• Re: unbalanced calls to post_reset() from usb_reset_device()
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: basic doubt on root hubs (on an embedded SoC)
  • From: Mandeep Sandhu <mandeepsandhu.chd@xxxxxxxxx>
• Re: [PATCH] usb: ehci-omap: Update platform header file path
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH] usb: ehci-omap: Update platform header file path
  • From: Olof Johansson <olof@xxxxxxxxx>
• RE: [PATCH 2/2] usb: ehci: Allow EHCI to be built on OMAP3
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: [PATCH] usb: ehci-omap: Update platform header file path
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH] usb: ehci-omap: Update platform header file path
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 2/2] usb: ehci: Allow EHCI to be built on OMAP3
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: Jan Kara <jack@xxxxxxx>
• Re: [patch]USB autosuspend for cdc-ether
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Error after calling usb_unlink_urb
  • From: aditya uttam <uttam.aditya@xxxxxxxxx>
• Re: basic doubt on root hubs (on an embedded SoC)
  • From: Rajaram R <rajaram.officemail@xxxxxxxxx>
• basic doubt on root hubs (on an embedded SoC)
  • From: Mandeep Sandhu <mandeepsandhu.chd@xxxxxxxxx>
• DaVinci MUSB controller with CPPI DMA
  • From: vkm <viral.vkm@xxxxxxxxx>
• Re: additional debug output for autosuspend in cdc-ether
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• RE: Gadget serial and cable detection (in user mode)
  • From: Thomas Søhus <list@xxxxxxxxx>
• Re: Kernel Oops on Unexpected Disconnect of /dev/ttyUSBx Device
  • From: Greg KH <gregkh@xxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: tmhikaru@xxxxxxxxx
• RE: Gadget serial and cable detection (in user mode)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: tmhikaru@xxxxxxxxx
• RE: Gadget serial and cable detection (in user mode)
  • From: Thomas Søhus <list@xxxxxxxxx>
• RE: Kernel Oops on Unexpected Disconnect of /dev/ttyUSBx Device
  • From: Rory Filer <rfiler@xxxxxxxxxxxxxxxxxx>
• [PATCH 38/38] don't use __exit_p to wrap composite_unbind
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: Jan Kara <jack@xxxxxxx>
• Re: [RFC v2 3/3] USB: Check bandwidth when switching alt settings.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: Jan Kara <jack@xxxxxxx>
• Re: [RFC v2 3/3] USB: Check bandwidth when switching alt settings.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: additional debug output for autosuspend in cdc-ether
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Add support for Mobilcom Debitel USB UMTS Surf-Stick to option driver
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: Jan Kara <jack@xxxxxxx>
• Re: [PATCH] Add support for Mobilcom Debitel USB UMTS Surf-Stick to option driver
  • From: Gernot Hillier <gernot@xxxxxxxxxx>
• Re: additional debug output for autosuspend in cdc-ether
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Error after calling usb_unlink_urb
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: additional debug output for autosuspend in cdc-ether
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [patch]USB autosuspend for cdc-ether
  • From: Steve.Glendinning@xxxxxxxx
• Re: [RFC v2 3/3] USB: Check bandwidth when switching alt settings.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 1/2] musb: Add context save and restore support
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 1/2] musb: Add context save and restore support
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [PATCH 1/2] musb: Add context save and restore support
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: Error after calling usb_unlink_urb
  • From: aditya uttam <uttam.aditya@xxxxxxxxx>
• [patch]reset_resume for cdc-ether
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [solved] HUAWEI E220, connection problems.
  • From: Alexey Fisher <bug-track@xxxxxxxxxxxxxxxxx>
• Re: Error after calling usb_unlink_urb
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: additional debug output for autosuspend in cdc-ether
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Error after calling usb_unlink_urb
  • From: aditya uttam <uttam.aditya@xxxxxxxxx>
• Re: additional debug output for autosuspend in cdc-ether
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: additional debug output for autosuspend in cdc-ether
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• RE: additional debug output for autosuspend in cdc-ether
  • From: Rickard Bellini <rickard.bellini@xxxxxxxxxxxx>
• Re: Error after calling usb_unlink_urb
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Error after calling usb_unlink_urb
  • From: aditya uttam <uttam.aditya@xxxxxxxxx>
• Re: [PATCH] wusb: Use sizeof struct rather than pointer
  • From: David Vrabel <david.vrabel@xxxxxxx>
• Re: [PATCH] wusb: Use sizeof struct rather than pointer
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: tmhikaru@xxxxxxxxx
• [RFC v2 3/3] USB: Check bandwidth when switching alt settings.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v2 2/3] xhci: Fix command completion after a drop endpoint.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v2 1/3] xhci: Make reverting an alt setting "unfailable".
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v2 0/3] USB: Add bus bandwidth mutex
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: HUAWEI E220, connection problems.
  • From: Alexey Fisher <bug-track@xxxxxxxxxxxxxxxxx>
• Re: HUAWEI E220, connection problems.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Gadget serial and cable detection (in user mode)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Kernel Oops on Unexpected Disconnect of /dev/ttyUSBx Device
  • From: Greg KH <gregkh@xxxxxxx>
• Re: additional debug output for autosuspend in cdc-ether
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Kernel Oops on Unexpected Disconnect of /dev/ttyUSBx Device
  • From: Rory Filer <rfiler@xxxxxxxxxxxxxxxxxx>
• Gadget serial and cable detection (in user mode)
  • From: Thomas Søhus <list@xxxxxxxxx>
• HUAWEI E220, connection problems.
  • From: Alexey Fisher <bug-track@xxxxxxxxxxxxxxxxx>
• Re: additional debug output for autosuspend in cdc-ether
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: additional debug output for autosuspend in cdc-ether
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: additional debug output for autosuspend in cdc-ether
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: tmhikaru@xxxxxxxxx
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: tmhikaru@xxxxxxxxx
• Re: additional debug output for autosuspend in cdc-ether
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: Jan Kara <jack@xxxxxxx>
• Re: [PATCH] [MUSB] Fix for crash in DM646x USB when (CPPI)DMA is enabled.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: Configuring alternate settings in USB3.0 using xHCI
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: additional debug output for autosuspend in cdc-ether
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 5/8] drivers/usb/host/xhci-mem.c: introduce missing kfree
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: (Fwd) Re: How can I use more than one input pipes with a USB d
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: additional debug output for autosuspend in cdc-ether
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [patch]race between disconnect and open in usbtouchscreen
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• RE: additional debug output for autosuspend in cdc-ether
  • From: Rickard Bellini <rickard.bellini@xxxxxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: Jan Kara <jack@xxxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Configuring alternate settings in USB3.0 using xHCI
  • From: Ramya Desai <ramya.desai@xxxxxxxxx>
• Re: [PATCH] MX27: Add USB platform devices and resources
  • From: Alan Carvalho de Assis <acassis@xxxxxxxxx>
• [patch]USB autosuspend for cdc-ether
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: MUSB: loading g_ether causes crash
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: AW: PROBLEM: usb core looses input packets
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] musb_gadget: remove pointless loop (take 2)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: MUSB: loading g_ether causes crash
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• MUSB: loading g_ether causes crash
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH 1/4] MUSB: Populate the VBUS GPIO with the correct GPIO number
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] MUSB: Populate the VBUS GPIO with the correct GPIO number.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] MX27: Add USB platform devices and resources
  • From: Alan Carvalho de Assis <acassis@xxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: Jan Kara <jack@xxxxxxx>
• RE: Re: why the bulk transferred data size in linux is smaller in Windows?
  • From: zhao.ming9@xxxxxxxxxx
• Re: looking for an advice on debugging USB 2.0
  • From: Vladimir Komendantsky <komendantsky@xxxxxxxxx>
• [PATCH 3/3] usbtouchscreen: add NEXIO (or iNexio) support
  • From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 2/4] MUSB: Fix aborted RX-DMA path
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH 2/3] usbtouchscreen: find input endpoint automatically
  • From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] usbtouchscreen: convert from usb_device to usb_interface
  • From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
• Re: looking for an advice on debugging USB 2.0
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Re: why the bulk transferred data size in linux is smaller in Windows?
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• RE: Re: why the bulk transferred data size in linux is smaller in Windows?
  • From: zhao.ming9@xxxxxxxxxx
• Re: BisonCam 5986:0203 kills USB
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• AW: PROBLEM: usb core looses input packets
  • From: "EXTERNAL Gebhardt Guenter (external, RtP2/TEF7)" <external.Guenter.Gebhardt@xxxxxxxxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: tmhikaru@xxxxxxxxx
• Re: [PATCH 1/2] musb: Add context save and restore support
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 2/4] MUSB: Fix aborted RX-DMA path
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [rfc/rft/patch v2 09/19] usb: musb: gadget: dma enabling for musb_gadget rx
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: cxacru usb_bulk_msg() firmware upload 36x slower with OHCI vs. UHCI
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: ftdi_sio: set device latency timeout at port probe
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH] USB: ftdi_sio: fix initialisation of latency timeout
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: cxacru usb_bulk_msg() firmware upload 36x slower with OHCI vs. UHCI
  • From: Simon Arlott <simon@xxxxxxxxxxx>
• Re: usb_kill_urb deadlock with multiple hubs in series (2.6.29)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: serial: fix typo in debug message
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH] USB: ftdi_sio: remove obsolete comment
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: cxacru usb_bulk_msg() firmware upload 36x slower with OHCI vs. UHCI
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: looking for an advice on debugging USB 2.0
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: ftdi_sio: fix error message on close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: cxacru usb_bulk_msg() firmware upload 36x slower with OHCI vs. UHCI
  • From: Simon Arlott <simon@xxxxxxxxxxx>
• Re: usb_kill_urb deadlock with multiple hubs in series (2.6.29)
  • From: Simon Arlott <simon@xxxxxxxxxxx>
• looking for an advice on debugging USB 2.0
  • From: Vladimir Komendantsky <komendantsky@xxxxxxxxx>
• Re: [PATCH] Add support for Mobilcom Debitel USB UMTS Surf-Stick to option driver
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH] Add support for Mobilcom Debitel USB UMTS Surf-Stick to option driver
  • From: Gernot Hillier <gernot@xxxxxxxxxx>
• Re: usb_kill_urb deadlock with multiple hubs in series (2.6.29)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: usb_kill_urb deadlock with multiple hubs in series (2.6.29)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: usb_kill_urb deadlock with multiple hubs in series (2.6.29)
  • From: Simon Arlott <simon@xxxxxxxxxxx>
• Re: usb_kill_urb deadlock with multiple hubs in series (2.6.29)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: looking for an advice on debugging USB 2.0
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [look like bug] System freeze with cdc-ether(?), 2.6.31.5 & 2.6.32-rc8.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• usb_kill_urb deadlock with multiple hubs in series (2.6.29)
  • From: Simon Arlott <simon@xxxxxxxxxxx>
• looking for an advice on debugging USB 2.0
  • From: Vladimir Komendantsky <komendantsky@xxxxxxxxx>
• [PATCH] wusb: Use sizeof struct rather than pointer
  • From: Roel Kluin <roel.kluin@xxxxxxxxx>
• [look like bug] System freeze with cdc-ether(?), 2.6.31.5 & 2.6.32-rc8.
  • From: Gennady Kupava <gb@xxxxxxxxx>
• [PATCH] USB: add remove_id sysfs attr for usb drivers
  • From: CHENG Renquan <rqcheng@xxxxxxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] drivers/usb/wusbcore: introduce missing usb_free_urb
  • From: Julia Lawall <julia@xxxxxxx>
• RE: omap3evm: ehci: audio record/play issue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: omap3evm: ehci: audio record/play issue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• RE: [PATCH 1/4] MUSB: Populate the VBUS GPIO with the correct GPIO number
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 1/4] MUSB: Populate the VBUS GPIO with the correct GPIO number
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• RE: [PATCH 1/4] MUSB: Populate the VBUS GPIO with the correct GPIO number
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH] MUSB: Populate the VBUS GPIO with the correct GPIO number.
  • From: "Subbrathnam, Swaminathan" <swami.iyer@xxxxxx>
• RE: [PATCH] MUSB: Populate the VBUS GPIO with the correct GPIO number.
  • From: "Subbrathnam, Swaminathan" <swami.iyer@xxxxxx>
• [PATCH 6/8] drivers/usb/host/ehci-omap.c: introduce missing kfree
  • From: Julia Lawall <julia@xxxxxxx>
• [PATCH 5/8] drivers/usb/host/xhci-mem.c: introduce missing kfree
  • From: Julia Lawall <julia@xxxxxxx>
• [REPOST PATCH 3/3] MXC: add platform resources for i.MX21 USB host controller.
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• [REPOST PATCH 2/3] MXC: use DMA_BIT_MASK macro rather than hardcoded constants.
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• [REPOST PATCH 1/3] MXC: Add i.MX21 specific USB host controller driver.
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• [REPOST PATCH 0/3] MX21 USB Host Support
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• [PATCH 1/4] MUSB: Populate the VBUS GPIO with the correct GPIO number
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH 2/4] MUSB: Fix aborted RX-DMA path
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH 3/4] usb: musb: gadget: set otg tranceiver to idle when registering gadget
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH] usb: musb: do not work if no gadget driver is loaded
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH 0/4] musb: more bugfixes for v2.6.32
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [PATCH v4] [RFC] NEXIO (or iNexio) support for usbtouchscreen
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• omap3evm: ehci: audio record/play issue
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 1/2] musb: Add context save and restore support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 2/2] musb: Add 'extvbus' in musb_hdrc_platform_data
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• Sierra oops on Disconnect While Port Open - kernel 2.6.27.39
  • From: Rory Filer <rfiler@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH] MUSB: Populate the VBUS GPIO with the correct GPIO number.
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: ASUSTeK M4A78T-E EHCI not working?
  • From: ST <st@xxxxxxxxxxxxxxxxxxx>
• Re: USB: prepare for changover to Runtime PM framework
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: USB: prepare for changover to Runtime PM framework
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v4] [RFC] NEXIO (or iNexio) support for usbtouchscreen
  • From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MUSB: Populate the VBUS GPIO with the correct GPIO number.
  • From: Greg KH <gregkh@xxxxxxx>
• Re: USB: prepare for changover to Runtime PM framework
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [patch]race between disconnect and open in usbtouchscreen
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH] MUSB: Populate the VBUS GPIO with the correct GPIO number.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: USB: prepare for changover to Runtime PM framework
  • From: Greg KH <greg@xxxxxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB: prepare for changover to Runtime PM framework
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [patch]race between disconnect and open in usbtouchscreen
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• patch usb-twl4030-enable-usb-regulators-before-enabling-usb-charging.patch added to gregkh-2.6 tree
  • From: <gregkh@xxxxxxx>
• Re: [PATCH] USB: add remove_id sysfs attr for usb drivers
  • From: Greg KH <greg@xxxxxxxxx>
• Re: USB: prepare for changover to Runtime PM framework
  • From: Greg KH <greg@xxxxxxxxx>
• [patch]race between disconnect and open in usbtouchscreen
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: device descriptor not sent correctly
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: device descriptor not sent correctly
  • From: Ivan Braginski <ivan.braginski@xxxxxxxx>
• Re: device descriptor not sent correctly
  • From: Greg KH <greg@xxxxxxxxx>
• Re: device descriptor not sent correctly
  • From: Ivan Braginski <ivan.braginski@xxxxxxxx>
• Re: Hardware handshaking not enabled for FTDI-based usb serialadapters in 2.6.32-rc7
  • From: "Martin Geleynse" <mgeleyns@xxxxxxxxxxxx>
• Re: [PATCH v4] [RFC] NEXIO (or iNexio) support for usbtouchscreen
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: device descriptor not sent correctly
  • From: Greg KH <greg@xxxxxxxxx>
• device descriptor not sent correctly
  • From: Ivan Braginski <ivan.braginski@xxxxxxxx>
• [PATCH] USB: twl4030: Enable USB regulators before enabling USB charging
  • From: "Aguilar Pena, Leed" <leed.aguilar@xxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Stephan Diestelhorst <stephan.diestelhorst@xxxxxxxxx>
• Re: PROBLEM: usb core looses input packets
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: additional debug output for autosuspend in cdc-ether
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• PROBLEM: usb core looses input packets
  • From: Günter Gebhardt <Bosch-RT.Guenter.Gebhardt@xxxxxxxxx>
• Re: [rfc/rft/patch v2 09/19] usb: musb: gadget: dma enabling for musb_gadget rx
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: (Fwd) Re: How can I use more than one input pipes with a USB d
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Hardware handshaking not enabled for FTDI-based usb serial adapters in 2.6.32-rc7
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Hardware handshaking not enabled for FTDI-based usb serial adapters in 2.6.32-rc7
  • From: "Martin Geleynse" <mgeleyns@xxxxxxxxxxxx>
• Re: [rfc/rft/patch v2 09/19] usb: musb: gadget: dma enabling for musb_gadget rx
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• (Fwd) Re: How can I use more than one input pipes with a USB d
  • From: "Wolfgang Wilhelm" <wilhelm@xxxxxxxxxxxxxx>
• RE: additional debug output for autosuspend in cdc-ether
  • From: Rickard Bellini <rickard.bellini@xxxxxxxxxxxx>
• Re: [rfc/rft/patch v2 09/19] usb: musb: gadget: dma enabling for musb_gadget rx
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH v4] [RFC] NEXIO (or iNexio) support for usbtouchscreen
  • From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
• Re: [rfc/rft/patch v2 09/19] usb: musb: gadget: dma enabling for musb_gadget rx
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [REPOST PATCH 1/3] MXC: Add i.MX21 specific USB host controller driver.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: US3 Bulk Stream Support in Linux
  • From: Greg KH <greg@xxxxxxxxx>
• RE: US3 Bulk Stream Support in Linux
  • From: Praveen Kumar MUSKULA <praveen.kumar.muskula@xxxxxxxxxxxxxx>
• Re: [rfc/rft/patch v2 09/19] usb: musb: gadget: dma enabling for musb_gadget rx
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH v3] [RFC] NEXIO (or iNexio) support for usbtouchscreen
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: WUSB general questions
  • From: David Vrabel <david.vrabel@xxxxxxx>
• Re: WUSB general questions
  • From: Andreas Kemnade <akemnade@xxxxxx>
• Re: Weird I/O errors with USB hard drive not remounting filesystem readonly
  • From: Jan Kara <jack@xxxxxxx>
• Re: How can I use more than one input pipes with a USB driver?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How can I use more than one input pipes with a USB driver?
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• How can I use more than one input pipes with a USB driver?
  • From: "Wolfgang Wilhelm" <wilhelm@xxxxxxxxxxxxxx>
• Re: US3 Bulk Stream Support in Linux
  • From: Greg KH <greg@xxxxxxxxx>
• Re: why the bulk transferred data size in linux is smaller in Windows?
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• why the bulk transferred data size in linux is smaller in Windows?
  • From: zhao.ming9@xxxxxxxxxx
• [PATCH v3] [RFC] NEXIO (or iNexio) support for usbtouchscreen
  • From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Exposing second ACM channel as tty for Nokia S60 phones.
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH] Exposing second ACM channel as tty for Nokia S60 phones.
  • From: Adrian Taylor <aat@xxxxxxxxxxx>
• US3 Bulk Stream Support in Linux
  • From: Praveen Kumar MUSKULA <praveen.kumar.muskula@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] musb_gadget: fix STALL handling
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• RE: [PATCH 0/8] musb: Add structure 'musb_hdrc_board_data'
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 1/2] add hex/bcd detection to usb modalias generation
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH 2/2] handle bcd incrementation in usb modalias generation
  • From: Nathaniel McCallum <nathaniel@xxxxxxxxxxxxxxxx>
• [PATCH 1/2] add hex/bcd detection to usb modalias generation
  • From: Nathaniel McCallum <nathaniel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] musb_gadget: fix STALL handling
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/2] add hex/bcd detection to usb modalias generation
  • From: Greg KH <greg@xxxxxxxxx>
• Re: cxacru usb_bulk_msg() firmware upload 36x slower with OHCI vs. UHCI
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [rfc/rft/patch 00/19] mode1 dma patches
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: cxacru usb_bulk_msg() firmware upload 36x slower with OHCI vs. UHCI
  • From: Simon Arlott <simon@xxxxxxxxxxx>
• [PATCH 2/2] handle bcd incrementation in usb modalias generation
  • From: Nathaniel McCallum <nathaniel@xxxxxxxxxxxxxxxx>
• [PATCH 1/2] add hex/bcd detection to usb modalias generation
  • From: Nathaniel McCallum <nathaniel@xxxxxxxxxxxxxxxx>
• Re: cxacru usb_bulk_msg() firmware upload 36x slower with OHCI vs. UHCI
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: cxacru usb_bulk_msg() firmware upload 36x slower with OHCI vs. UHCI
  • From: Simon Arlott <simon@xxxxxxxxxxx>
• [PATCH 4/4] musb_gadget: remove pointless loop
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH 3/4] musb_gadget_ep0: stop abusing musb_gadget_set_halt()
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH 2/4] musb_gadget: implement set_wedge() method
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH 1/5] musb_gadget: fix STALL handling
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] EHCI: don't send Clear-TT-Buffer following a STALL
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] EHCI: don't send Clear-TT-Buffer following a STALL
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] EHCI: don't send Clear-TT-Buffer following a STALL
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [rfc/rft/patch v2 08/19] usb: musb: gadget: introducing new start and stop dma funtion
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] Close usb_find_interface race
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] EHCI: don't send Clear-TT-Buffer following a STALL
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] Close usb_find_interface race
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: -rc6: something (probably active usb bluetooth) blocks suspend
  • From: Pavel Machek <pavel@xxxxxx>
• Re: -rc6: something (probably active usb bluetooth) blocks suspend
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Use of usb_find_interface in open is racy
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: Use of usb_find_interface in open is racy
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: Use of usb_find_interface in open is racy
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: Use of usb_find_interface in open is racy
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• [PATCH] EHCI: don't send Clear-TT-Buffer following a STALL
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Problems with p55-express and sleeping usb-hds
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: additional debug output for autosuspend in cdc-ether
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: cxacru usb_bulk_msg() firmware upload 36x slower with OHCI vs. UHCI
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [rfc/rft/patch 00/19] mode1 dma patches
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: Use of usb_find_interface in open is racy
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Use of usb_find_interface in open is racy
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Use of usb_find_interface in open is racy
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] [RFC] NEXIO (or iNexio) support for usbtouchscreen
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: ASUSTeK M4A78T-E EHCI not working?
  • From: ST <st@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: FIX bitfield istl_flip:1, make it unsigned.
  • From: Mike Frysinger <vapier.adi@xxxxxxxxx>
• Re: ASUSTeK M4A78T-E EHCI not working?
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Re: Use of usb_find_interface in open is racy
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 0/8] musb: Add structure 'musb_hdrc_board_data'
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH] USB: FIX bitfield istl_flip:1, make it unsigned.
  • From: Roel Kluin <roel.kluin@xxxxxxxxx>
• cxacru usb_bulk_msg() firmware upload 36x slower with OHCI vs. UHCI
  • From: "Simon Arlott" <simon@xxxxxxxxxxx>
• [PATCH v2] [RFC] NEXIO (or iNexio) support for usbtouchscreen
  • From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
• ASUSTeK M4A78T-E EHCI not working?
  • From: ST <st@xxxxxxxxxxxxxxxxxxx>
• Re: Use of usb_find_interface in open is racy
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [REPOST PATCH 1/3] MXC: Add i.MX21 specific USB host controller driver.
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• RE: [PATCH 2/8] musb: Get power (mA) from board data
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH][RFC] Bugs in USB modalias generation
  • From: Greg KH <greg@xxxxxxxxx>
• RE: [PATCH 4/8] musb: Update setup_usb() call for all Davinci boards
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH 3/8] musb: Update musb_init() call for all OMAP3 boards
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH] ftdi_sio: Keep going when write errors are encountered.
  • From: Greg KH <gregkh@xxxxxxx>
• [PATCH] ftdi_sio: Keep going when write errors are encountered.
  • From: ebiederm@xxxxxxxxxxxx (Eric W. Biederman)
• Re: [PATCH] USB: ftdi_sio: Remove tty->low_latency.
  • From: ebiederm@xxxxxxxxxxxx (Eric W. Biederman)
• [PATCH 3/8] USB: cdc_acm: Fix memory leak after hangup
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 2/8] USB: cdc_acm: Fix race condition when opening tty
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 4/8] USB: xhci: Fix bug memory free after failed initialization.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 8/8] USB: option.c: add support for D-Link DWM-162-U5
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 6/8] USB: xhci: Fix scratchpad deallocation.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 7/8] USB: usbmon: fix bug in mon_buff_area_shrink
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 5/8] USB: xhci: Fix TRB physical to virtual address translation.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 1/8] USB: ohci: quirk AMD prefetch for USB 1.1 ISO transfer
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [GIT PATCH] USB bugfixes for 2.6.32-git
  • From: Greg KH <gregkh@xxxxxxx>
• Re: Problems with p55-express and sleeping usb-hds
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• [patch 1/2] drivers/usb/core/hcd.c: quiet NULL pointer sparse noise
  • From: akpm@xxxxxxxxxxxxxxxxxxxx
• [patch 2/2] usb: option.c: add support for D-Link DWM-162-U5
  • From: akpm@xxxxxxxxxxxxxxxxxxxx
• Re: Exposing vendor-specific ACM channels to userspace as tty devices
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Exposing vendor-specific ACM channels to userspace as tty devices
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [patch for 2.6.32? 2/3] hso: fix debug routines
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [patch for 2.6.32? 2/3] hso: fix debug routines
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• [patch for 2.6.32? 1/3] usb: amd5536udc: fixed shared interrupt bug and warning oops
  • From: akpm@xxxxxxxxxxxxxxxxxxxx
• [patch for 2.6.32? 3/3] hso: fix soft-lockup
  • From: akpm@xxxxxxxxxxxxxxxxxxxx
• [patch for 2.6.32? 2/3] hso: fix debug routines
  • From: akpm@xxxxxxxxxxxxxxxxxxxx
• Re: Exposing vendor-specific ACM channels to userspace as tty devices
  • From: Adrian Taylor <adrian.taylor@xxxxxxxxxxx>
• Re: Exposing vendor-specific ACM channels to userspace as tty devices
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH] USB: ftdi_sio: Remove tty->low_latency.
  • From: ebiederm@xxxxxxxxxxxx (Eric W. Biederman)
• Re: Exposing vendor-specific ACM channels to userspace as tty devices
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [rfc/rft/patch v2 17/19] usb: musb: fix behavior with g_zero and g_ether
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [rfc/rft/patch v2 18/19] usb: musb: prevent possible kernel oops
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] USB: ftdi_sio: Remove tty->low_latency.
  • From: ebiederm@xxxxxxxxxxxx (Eric W. Biederman)
• Re: linux-next: Tree for November 2 (usb/whci)
  • From: David Vrabel <david.vrabel@xxxxxxx>
• Re: [rfc/rft/patch v2 01/19] usb: musb: gadget: removing ifdef dma code
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] USB: ftdi_sio: Remove tty->low_latency.
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH] USB: ftdi_sio: Remove tty->low_latency.
  • From: ebiederm@xxxxxxxxxxxx (Eric W. Biederman)
• Re: Exposing vendor-specific ACM channels to userspace as tty devices
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [rfc/rft/patch v2 01/19] usb: musb: gadget: removing ifdef dma code
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [rfc/rft/patch v2 10/19] usb: musb: enabling dma option as module parameter
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [rfc/rft/patch v2 07/19] usb: musb: gadget: avoid allocating several dma channels
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Exposing vendor-specific ACM channels to userspace as tty devices
  • From: Adrian Taylor <adrian.taylor@xxxxxxxxxxx>
• Re: [rfc/rft/patch v2 05/19] usb: musb_gadget: Tie rx path to interrupt event
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [rfc/rft/patch v2 03/19] usb:musb: forcing non usage of dma
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• RE: additional debug output for autosuspend in cdc-ether
  • From: Rickard Bellini <rickard.bellini@xxxxxxxxxxxx>
• Re: [PATCH 3/8] musb: Update musb_init() call for all OMAP3 boards
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 8/8] musb: set 'extvbus = 0' for Blackfin boards
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/8] musb: Update setup_usb() call for all Davinci boards
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 4/8] musb: Update setup_usb() call for all Davinci boards
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 7/8] musb: set 'extvbus = 0' for Davinci boards
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 6/8] musb: set 'extvbus = 0' for OMAP3 boards
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• RE: additional debug output for autosuspend in cdc-ether
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/8] musb: Add structure to get board specific data
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 4/8] musb: Update setup_usb() call for all Davinci boards
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: linux-next: Tree for November 2 (usb/whci)
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: Regression in audio playback with USB DAC caused by "USB: EHCI: use the new clear_tt_buffer interface"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/8] musb: Get power (mA) from board data
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/8] musb: Add structure to get board specific data
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• RE: [rfc/rft/patch v2 01/19] usb: musb: gadget: removing ifdef dma code
  • From: "Subbrathnam, Swaminathan" <swami.iyer@xxxxxx>
• Re: [PATCH] NEXIO (or iNexio) support for usbtouchscreen
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH 3/8] musb: Update musb_init() call for all OMAP3 boards
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 7/8] musb: set 'extvbus = 0' for Davinci boards
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 2/8] musb: Get power (mA) from board data
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 1/8] musb: Add structure to get board specific data
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 8/8] musb: set 'extvbus = 0' for Blackfin boards
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 4/8] musb: Update setup_usb() call for all Davinci boards
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 6/8] musb: set 'extvbus = 0' for OMAP3 boards
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 5/8] musb: Add 'extvbus' in musb_hdrc_board_data
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 0/8] musb: Add structure 'musb_hdrc_board_data'
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• Re: BisonCam 5986:0203 kills USB
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [rfc/rft/patch v2 01/19] usb: musb: gadget: removing ifdef dma code
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [rfc/rft/patch v2 01/19] usb: musb: gadget: removing ifdef dma code
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [rfc/rft/patch 02/19] usb: musb: reorganizing code
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [rfc/rft/patch v2 01/19] usb: musb: gadget: removing ifdef dma code
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [rfc/rft/patch 02/19] usb: musb: reorganizing code
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [rfc/rft/patch 02/19] usb: musb: reorganizing code
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [rfc/rft/patch v2 06/19] usb: musb: gadget: setting otg tranceiver to idle when registering gadget
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [rfc/rft/patch v2 00/19] musb mode1 dma support
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [rfc/rft/patch v2 06/19] usb: musb: gadget: setting otg tranceiver to idle when registering gadget
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: [rfc/rft/patch v2 07/19] usb: musb: gadget: avoid allocating several dma channels
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [rfc/rft/patch v2 02/19] usb: musb: reorganizing code
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [rfc/rft/patch 02/19] usb: musb: reorganizing code
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [rfc/rft/patch v2 07/19] usb: musb: gadget: avoid allocating several dma channels
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [rfc/rft/patch v2 07/19] usb: musb: gadget: avoid allocating several dma channels
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [rfc/rft/patch v2 18/19] usb: musb: prevent possible kernel oops
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 19/19] usb: musb: wait for RxPktRdy to get set
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 14/19] usb: musb: clean-up in debug messages
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 06/19] usb: musb: gadget: setting otg tranceiver to idle when registering gadget
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 17/19] usb: musb: fix behavior with g_zero and g_ether
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 13/19] usb: musb: received data length updated on dma abort
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 10/19] usb: musb: enabling dma option as module parameter
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 11/19] usb: musb: musbhsdma cleanup
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 15/19] usb: musb: enabling dma tx for gadget
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 16/19] usb: musb: do not work if no gadget driver is loaded
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 12/19] usb: musb: reduce identation level
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 03/19] usb:musb: forcing non usage of dma
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 04/19] usb: musb_gadget: renaming fuctions
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 05/19] usb: musb_gadget: Tie rx path to interrupt event
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 07/19] usb: musb: gadget: avoid allocating several dma channels
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 09/19] usb: musb: gadget: dma enabling for musb_gadget rx
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 08/19] usb: musb: gadget: introducing new start and stop dma funtion
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 02/19] usb: musb: reorganizing code
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 01/19] usb: musb: gadget: removing ifdef dma code
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch v2 00/19] musb mode1 dma support
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [rfc/rft/patch 02/19] usb: musb: reorganizing code
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [rfc/rft/patch 02/19] usb: musb: reorganizing code
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [rfc/rft/patch 00/19] mode1 dma patches
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [rfc/rft/patch 00/19] mode1 dma patches
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [rfc/rft/patch 00/19] mode1 dma patches
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [rfc/rft/patch 00/19] mode1 dma patches
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 1/4] musb: Remove unwanted message in boot log
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [rfc/rft/patch 00/19] mode1 dma patches
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [rfc/rft/patch 00/19] mode1 dma patches
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [rfc/rft/patch 10/19] usb: musb: enabling dma option as module parameter
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 07/19] usb: musb: gadget: avoid allocating several dma channels
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 08/19] usb: musb: gadget: introducing new start and stop dma funtion
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 18/19] usb: musb: prevent possible kernel oops
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 15/19] usb: musb: enabling dma tx for gadget
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 19/19] usb: musb: wait for RxPktRdy to get set
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 14/19] usb: musb: clean-up in debug messages
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 17/19] usb: musb: fix behavior with g_zero and g_ether
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 11/19] usb: musb: musbhsdma cleanup
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 12/19] usb: musb: reduce identation level
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 13/19] usb: musb: received data length updated on dma abort
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 04/19] usb: musb_gadget: renaming fuctions
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 16/19] usb: musb: do not work if no gadget driver is loaded
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 02/19] usb: musb: reorganizing code
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 03/19] usb:musb: forcing non usage of dma
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 09/19] usb: musb: gadget: dma enabling for musb_gadget rx
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 06/19] usb: musb: gadget: setting otg tranceiver to idle when registering gadget
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 05/19] usb: musb_gadget: Tie rx path to interrupt event
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 00/19] mode1 dma patches
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 01/19] usb: musb: gadget: removing ifdef dma code
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: linux-next: Tree for November 2 (usb/whci)
  • From: David Vrabel <david.vrabel@xxxxxxx>
• Re:BisonCam 5986:0203 kills USB
  • From: Stephan Diestelhorst <stephan.diestelhorst@xxxxxxxxx>
• [PATCH 4/4] USB: musb: Fix CPPI IRQs not being signaled
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 3/4] USB: musb: respect usb_request->zero in control requests
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 0/4] musb: bugfixes for v2.6.32
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 1/4] musb: Remove unwanted message in boot log
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 2/4] musb: fix ISOC Tx programming for CPPI DMAs
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• Re: Regression in audio playback with USB DAC caused by "USB: EHCI: use the new clear_tt_buffer interface"
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Re: [PATCH] USB: add remove_id sysfs attr for usb drivers
  • From: Cheng Renquan <crquan@xxxxxxxxx>
• Re: A videocam works on OHCI and fails on UHCI
  • From: Theodore Kilgore <kilgota@xxxxxxxxxxxxxxxxxxxxxx>
• RE: additional debug output for autosuspend in cdc-ether
  • From: Rickard Bellini <rickard.bellini@xxxxxxxxxxxx>