This patch:
- cleans musbhsdma defines
- enables burst mode for both dma modes
- mode1 should only be enabled if upper layer tells usi to do so.
- rely on the mode set by musb_gadget.c or musb_host.c and don't branch
again
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
Signed-off-by: Arnaud Mandy <ext-arnaud.2.mandy@xxxxxxxxx>
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
---
drivers/usb/musb/musbhsdma.c | 37 ++++++++++++++-----------------------
drivers/usb/musb/musbhsdma.h | 20 ++++++++++----------
2 files changed, 24 insertions(+), 33 deletions(-)
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 9371578..1e0ab57 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -134,27 +134,21 @@ static void configure_channel(struct dma_channel *channel,
DBG(4, "%p, pkt_sz %d, addr 0x%x, len %d, mode %d\n",
channel, packet_sz, dma_addr, len, mode);
- if (mode) {
- csr |= 1 << MUSB_HSDMA_MODE1_SHIFT;
- BUG_ON(len < packet_sz);
-
- if (packet_sz >= 64) {
- csr |= MUSB_HSDMA_BURSTMODE_INCR16
- << MUSB_HSDMA_BURSTMODE_SHIFT;
- } else if (packet_sz >= 32) {
- csr |= MUSB_HSDMA_BURSTMODE_INCR8
- << MUSB_HSDMA_BURSTMODE_SHIFT;
- } else if (packet_sz >= 16) {
- csr |= MUSB_HSDMA_BURSTMODE_INCR4
- << MUSB_HSDMA_BURSTMODE_SHIFT;
- }
- }
+ if (mode)
+ csr |= MUSB_HSDMA_MODE1;
+
+ if (packet_sz >= 64)
+ csr |= MUSB_HSDMA_BURSTMODE_INCR16;
+ else if (packet_sz >= 32)
+ csr |= MUSB_HSDMA_BURSTMODE_INCR8;
+ else if (packet_sz >= 16)
+ csr |= MUSB_HSDMA_BURSTMODE_INCR4;
csr |= (musb_channel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT)
- | (1 << MUSB_HSDMA_ENABLE_SHIFT)
- | (1 << MUSB_HSDMA_IRQENABLE_SHIFT)
+ | MUSB_HSDMA_ENABLE
+ | MUSB_HSDMA_IRQENABLE
| (musb_channel->transmit
- ? (1 << MUSB_HSDMA_TRANSMIT_SHIFT)
+ ? MUSB_HSDMA_TRANSMIT
: 0);
/* address/count */
@@ -187,10 +181,7 @@ static int dma_channel_program(struct dma_channel *channel,
musb_channel->max_packet_sz = packet_sz;
channel->status = MUSB_DMA_STATUS_BUSY;
- if ((mode == 1) && (len >= packet_sz))
- configure_channel(channel, packet_sz, 1, dma_addr, len);
- else
- configure_channel(channel, packet_sz, 0, dma_addr, len);
+ configure_channel(channel, packet_sz, mode, dma_addr, len);
return true;
}
@@ -275,7 +266,7 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
MUSB_HSDMA_CHANNEL_OFFSET(bchannel,
MUSB_HSDMA_CONTROL));
- if (csr & (1 << MUSB_HSDMA_BUSERROR_SHIFT)) {
+ if (csr & MUSB_HSDMA_BUSERROR) {
musb_channel->channel.status =
MUSB_DMA_STATUS_BUS_ABORT;
} else {
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
index 1299d92..fb8fcd1 100644
--- a/drivers/usb/musb/musbhsdma.h
+++ b/drivers/usb/musb/musbhsdma.h
@@ -110,18 +110,18 @@ static inline void musb_write_hsdma_count(void __iomem *mbase,
#endif /* CONFIG_BLACKFIN */
/* control register (16-bit): */
-#define MUSB_HSDMA_ENABLE_SHIFT 0
-#define MUSB_HSDMA_TRANSMIT_SHIFT 1
-#define MUSB_HSDMA_MODE1_SHIFT 2
-#define MUSB_HSDMA_IRQENABLE_SHIFT 3
+#define MUSB_HSDMA_ENABLE (1 << 0)
+#define MUSB_HSDMA_TRANSMIT (1 << 1)
+#define MUSB_HSDMA_MODE1 (1 << 2)
+#define MUSB_HSDMA_IRQENABLE (1 << 3)
#define MUSB_HSDMA_ENDPOINT_SHIFT 4
-#define MUSB_HSDMA_BUSERROR_SHIFT 8
+#define MUSB_HSDMA_BUSERROR (1 << 8)
+
#define MUSB_HSDMA_BURSTMODE_SHIFT 9
-#define MUSB_HSDMA_BURSTMODE (3 << MUSB_HSDMA_BURSTMODE_SHIFT)
-#define MUSB_HSDMA_BURSTMODE_UNSPEC 0
-#define MUSB_HSDMA_BURSTMODE_INCR4 1
-#define MUSB_HSDMA_BURSTMODE_INCR8 2
-#define MUSB_HSDMA_BURSTMODE_INCR16 3
+#define MUSB_HSDMA_BURSTMODE_UNSPEC (0 << MUSB_HSDMA_BURSTMODE_SHIFT)
+#define MUSB_HSDMA_BURSTMODE_INCR4 (1 << MUSB_HSDMA_BURSTMODE_SHIFT)
+#define MUSB_HSDMA_BURSTMODE_INCR8 (2 << MUSB_HSDMA_BURSTMODE_SHIFT)
+#define MUSB_HSDMA_BURSTMODE_INCR16 (3 << MUSB_HSDMA_BURSTMODE_SHIFT)
#define MUSB_HSDMA_CHANNELS 8
--
1.6.4.2.253.g0b1fac
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
