Linux RAID Storage Date Index

• Thread Index

• Re: mdadm 2.5.2 - Static built , Interesting warnings when
  • From: Nix <nix@xxxxxxxxxxxxx>
• mdadm 2.5.2 - Static built , Interesting warnings when
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: When will the Areca RAID driver be merged into mainline?
  • From: "Randy.Dunlap" <rdunlap@xxxxxxxxxxxx>
• When will the Areca RAID driver be merged into mainline?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Multiple raids on one machine?
  • From: Nix <nix@xxxxxxxxxxxxx>
• Re: recover data from linear raid
  • From: Dimitris Zilaskos <dzila@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Large single raid... - XFS over NFS woes
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• ANNOUNCE: mdadm 2.5.2 - A tool for managing Soft RAID under Linux
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Multiple raids on one machine?
  • From: Chris Allen <chris@xxxxxxx>
• Re: [PATCH*2] mdadm works with uClibc from SVN
  • From: Nix <nix@xxxxxxxxxxxxx>
• Re: Multiple raids on one machine?
  • From: Nix <nix@xxxxxxxxxxxxx>
• Re: [PATCH*2] mdadm works with uClibc from SVN
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH*2] mdadm works with uClibc from SVN
  • From: Nix <nix@xxxxxxxxxxxxx>
• Re: recover data from linear raid
  • From: Andreas Dilger <adilger@xxxxxxxxxxxxx>
• [PATCH 004 of 12] md: Fix resync speed calculation for restarted resyncs.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 008 of 12] md: Unify usage of symbolic names for perms.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 005 of 12] md: Fix a plug/unplug race in raid5
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 003 of 12] md: Delay starting md threads until array is completely setup.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 010 of 12] md: Remove a variable that is now unused.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 012 of 12] md: Include sector number in messages about corrected read errors.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 006 of 12] md: Fix some small races in bitmap plugging in raid5.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 007 of 12] md: Fix usage of wrong variable in raid1
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 001 of 12] md: Possible fix for unplug problem
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 000 of 12] md: Introduction
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 011 of 12] md: Fix "Will Configure" message when interpreting md= kernel parameter.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 009 of 12] md: Require CAP_SYS_ADMIN for (re-)configuring md devices via sysfs.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 002 of 12] md: Set desc_nr correctly for version-1 superblocks.
  • From: NeilBrown <neilb@xxxxxxx>
• Re: recover data from linear raid
  • From: Neil Brown <neilb@xxxxxxxxxxxxxxx>
• Re: recover data from linear raid
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Bug in 2.6.17 / mdadm 2.5.1
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Bug in 2.6.17 / mdadm 2.5.1
  • From: Andre Tomt <andre@xxxxxxxx>
• [-mm patch] make variables static after klibc merge
  • From: Adrian Bunk <bunk@xxxxxxxxx>
• [-mm patch] drivers/md/raid5.c: remove an unused variable
  • From: Adrian Bunk <bunk@xxxxxxxxx>
• Re: recover data from linear raid
  • From: Dimitris Zilaskos <dzila@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: recover data from linear raid
  • From: Dimitris Zilaskos <dzila@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: IBM xSeries stop responding during RAID1 reconstruction
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: RAID5 degraded after mdadm -S, mdadm --assemble (everytime)
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: recover data from linear raid
  • From: Dimitris Zilaskos <dzila@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Is shrinking raid5 possible?
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: Multiple raids on one machine?
  • From: Chris Allen <chris@xxxxxxx>
• Re: Multiple raids on one machine?
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Is shrinking raid5 possible?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH*2] mdadm works with uClibc from SVN
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Bug in 2.6.17 / mdadm 2.5.1
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Bug in 2.6.17 / mdadm 2.5.1
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Adam Talbot <talbotx@xxxxxxxxxxx>
• Re: Multiple raids on one machine?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Multiple raids on one machine?
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Multiple raids on one machine?
  • From: "Jim Buttafuoco" <jim@xxxxxxxxxxxxxx>
• Multiple raids on one machine?
  • From: Chris Allen <chris@xxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Chris Allen <chris@xxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: "David Rees" <drees76@xxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Adam Talbot <talbotx@xxxxxxxxxxx>
• Bug in 2.6.17 / mdadm 2.5.1
  • From: Ronald Lembcke <es186@xxxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Joshua Baker-LePain <jlb17@xxxxxxxx>
• Re: Raid5 reshape (Solved)
  • From: "Nigel J. Terry" <nigel@xxxxxxxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Adam Talbot <talbotx@xxxxxxxxxxx>
• Re: [PATCH*2] mdadm works with uClibc from SVN
  • From: Nix <nix@xxxxxxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID5 degraded after mdadm -S, mdadm --assemble (everytime)
  • From: Ronald Lembcke <es186@xxxxxxxxxx>
• RAID5 degraded after mdadm -S, mdadm --assemble (everytime)
  • From: Ronald Lembcke <es186@xxxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: [PATCH*2] mdadm works with uClibc from SVN
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Adam Talbot <talbotx@xxxxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Nix <nix@xxxxxxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Nix <nix@xxxxxxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Nix <nix@xxxxxxxxxxxxx>
• Re: [PATCH*2] mdadm works with uClibc from SVN
  • From: Nix <nix@xxxxxxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Tom Vier <tmv@xxxxxxxxxxx>
• Re: Is shrinking raid5 possible?
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Christian Pedaschus <cpedaschus@xxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Christian Pedaschus <cpedaschus@xxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Russell Cattelan <cattelan@xxxxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Andreas Dilger <adilger@xxxxxxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: "Francois Barre" <francois.barre@xxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Chris Allen <chris@xxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: "Francois Barre" <francois.barre@xxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: "Martin Schröder" <martin@xxxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: "Francois Barre" <francois.barre@xxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Chris Allen <chris@xxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: "Francois Barre" <francois.barre@xxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: PFC <lists@xxxxxxxxxx>
• Re: Is shrinking raid5 possible?
  • From: Henrik Holst <henrik.holst@xxxxxxxxxx>
• Re: [PATCH*2] mdadm works with uClibc from SVN
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH*2] mdadm works with uClibc from SVN
  • From: Nix <nix@xxxxxxxxxxxxx>
• Re: Ok to go ahead with this setup?
  • From: Ricky Beam <jfbeam@xxxxxxxxxxxxxx>
• Re: Curious code in autostart_array
  • From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
• Re: Curious code in autostart_array
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Curious code in autostart_array
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Curious code in autostart_array
  • From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
• Re: Ok to go ahead with this setup?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Ok to go ahead with this setup?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: New FAQ entry? (was IBM xSeries stop responding during RAID1 reconstruction)
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Ok to go ahead with this setup?
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Is shrinking raid5 possible?
  • From: Paul Davidson <Paul.Davidson@xxxxxxxxxx>
• Re: Is shrinking raid5 possible?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Is shrinking raid5 possible?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: proactive raid5 disk replacement success (using bitmap + raid1)
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: proactive raid5 disk replacement success (using bitmap + raid1)
  • From: dean gaudet <dean@xxxxxxxxxx>
• Re: proactive raid5 disk replacement success (using bitmap + raid1)
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: Ok to go ahead with this setup?
  • From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Chris Allen <chris@xxxxxxxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Chris Allen <chris@xxxxxxx>
• Re: Ok to go ahead with this setup?
  • From: "Christian Pernegger" <pernegger@xxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Large single raid and XFS or two small ones and EXT3?
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Large single raid and XFS or two small ones and EXT3?
  • From: Chris Allen <chris@xxxxxxx>
• Re: Ok to go ahead with this setup?
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: Ok to go ahead with this setup?
  • From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
• Re: read perfomance patchset
  • From: Neil Brown <neilb@xxxxxxx>
• Re: New FAQ entry? (was IBM xSeries stop responding during RAID1 reconstruction)
  • From: Niccolo Rigacci <niccolo@xxxxxxxxxxx>
• Re: Can't get drives containing spare devices to spindown
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Can't get drives containing spare devices to spindown
  • From: "Marc L. de Bruin" <marc@xxxxxxxxxxx>
• Re: Can't get drives containing spare devices to spindown
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Can't get drives containing spare devices to spindown
  • From: "Marc L. de Bruin" <marc@xxxxxxxxxxx>
• Re: New FAQ entry? (was IBM xSeries stop responding during RAID1 reconstruction)
  • From: Gil <gil@xxxxxxxxxxxxx>
• Re: New FAQ entry? (was IBM xSeries stop responding during RAID1 reconstruction)
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• [-mm patch] drivers/md/md.c: make code static
  • From: Adrian Bunk <bunk@xxxxxxxxx>
• Re: bitmap status question
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Re: New FAQ entry? (was IBM xSeries stop responding during RAID1 reconstruction)
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• bitmap status question
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: New FAQ entry? (was IBM xSeries stop responding during RAID1 reconstruction)
  • From: David Greaves <david@xxxxxxxxxxxx>
• New FAQ entry? (was IBM xSeries stop responding during RAID1 reconstruction)
  • From: Niccolo Rigacci <niccolo@xxxxxxxxxxx>
• Re: Raid5 reshape
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH*2] mdadm works with uClibc from SVN
  • From: Nix <nix@xxxxxxxxxxxxx>
• [PATCH*2] mdadm works with uClibc from SVN
  • From: Nix <nix@xxxxxxxxxxxxx>
• Re: IBM xSeries stop responding during RAID1 reconstruction
  • From: Gabor Gombas <gombasg@xxxxxxxxx>
• Re: IBM xSeries stop responding during RAID1 reconstruction
  • From: Niccolo Rigacci <niccolo@xxxxxxxxxxx>
• Re: IBM xSeries stop responding during RAID1 reconstruction
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: the question about raid0_make_request
  • From: "liu yang" <liudows2@xxxxxxxxx>
• Re: IBM xSeries stop responding during RAID1 reconstruction
  • From: Gabor Gombas <gombasg@xxxxxxxxx>
• Re: IBM xSeries stop responding during RAID1 reconstruction
  • From: Niccolo Rigacci <niccolo@xxxxxxxxxxx>
• Re: Raid5 reshape
  • From: "Nigel J. Terry" <nigel@xxxxxxxxxxxxxx>
• Re: [PATCH] ANNOUNCE: mdadm 2.5.1 - A tool for managing Soft RAID under Linux
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Raid5 reshape
  • From: "Nigel J. Terry" <nigel@xxxxxxxxxxxxxx>
• Re: Raid5 reshape
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Raid5 reshape
  • From: "Nigel J. Terry" <nigel@xxxxxxxxxxxxxx>
• Re: Raid5 reshape
  • From: Mike Hardy <mhardy@xxxxxxx>
• Re: Raid5 reshape
  • From: "Nigel J. Terry" <nigel@xxxxxxxxxxxxxx>
• Re: Raid5 reshape
  • From: Neil Brown <neilb@xxxxxxx>
• Re: the question about raid0_make_request
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Raid5 reshape
  • From: "Nigel J. Terry" <nigel@xxxxxxxxxxxxxx>
• [patch] typo
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• --dangerous-no-resync
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: [PATCH] ANNOUNCE: mdadm 2.5.1 - A tool for managing Soft RAID under Linux
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Re: [PATCH] ANNOUNCE: mdadm 2.5.1 - A tool for managing Soft RAID under Linux
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Re: [PATCH] ANNOUNCE: mdadm 2.5.1 - A tool for managing Soft RAID under Linux
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Re: IBM xSeries stop responding during RAID1 reconstruction
  • From: Gabor Gombas <gombasg@xxxxxxxxx>
• read perfomance patchset
  • From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
• Re: the question about raid0_make_request
  • From: Neil Brown <neilb@xxxxxxx>
• Re: the question about raid0_make_request
  • From: "liu yang" <liudows2@xxxxxxxxx>
• Re: Is shrinking raid5 possible?
  • From: Paul Davidson <Paul.Davidson@xxxxxxxxxx>
• Re: Is shrinking raid5 possible?
  • From: Neil Brown <neilb@xxxxxxx>
• Is shrinking raid5 possible?
  • From: Paul Davidson <Paul.Davidson@xxxxxxxxxx>
• Re: Raid5 reshape
  • From: Neil Brown <neilb@xxxxxxx>
• Re: the question about raid0_make_request
  • From: Neil Brown <neilb@xxxxxxx>
• the question about raid0_make_request
  • From: "liu yang" <liudows2@xxxxxxxxx>
• Re: Raid5 reshape
  • From: "Nigel J. Terry" <nigel@xxxxxxxxxxxxxx>
• SW RAID 5 Bug? - Slow After Rebuild (XFS+2.6.16.20)
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: Raid5 reshape
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Raid5 reshape
  • From: "Nigel J. Terry" <nigel@xxxxxxxxxxxxxx>
• Re: Raid5 reshape
  • From: "Nigel J. Terry" <nigel@xxxxxxxxxxxxxx>
• Re: Raid5 reshape
  • From: "Nigel J. Terry" <nigel@xxxxxxxxxxxxxx>
• Re: Raid5 reshape
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Raid5 software problems after loosing 4 disks for 48 hours
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: Raid5 reshape
  • From: "Nigel J. Terry" <nigel@xxxxxxxxxxxxxx>
• Re: Raid5 software problems after loosing 4 disks for 48 hours
  • From: "Wilson Wilson" <wilson150@xxxxxxxxx>
• Re: IBM xSeries stop responding during RAID1 reconstruction
  • From: Niccolo Rigacci <niccolo@xxxxxxxxxxx>
• Re: mdadm 2.5.1 - A problem came up ...
  • From: Neil Brown <neilb@xxxxxxx>
• mdadm 2.5.1 - A problem came up ...
  • From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
• Re: Raid5 reshape
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Raid5 reshape
  • From: "Nigel J. Terry" <nigel@xxxxxxxxxxxxxx>
• Re: Raid5 reshape
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid6
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: ANNOUNCE: mdadm 2.5.1 - A tool for managing Soft RAID under Linux
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Raid5 reshape
  • From: Tim T <irule@xxxxxxxxx>
• Re: Raid5 reshape
  • From: "Nigel J. Terry" <nigel@xxxxxxxxxxxxxx>
• Re: ANNOUNCE: mdadm 2.5.1 - A tool for managing Soft RAID under Linux
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Re: to understand the logic of raid0_make_request
  • From: "liu yang" <liudows2@xxxxxxxxx>
• Re: RAID on the root partition /
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: Raid5 reshape
  • From: Neil Brown <neilb@xxxxxxx>
• Raid5 reshape
  • From: Tim <irule@xxxxxxxxx>
• Re: RAID on the root partition /
  • From: Neil Brown <neilb@xxxxxxx>
• RAID on the root partition /
  • From: Adam Talbot <talbotx@xxxxxxxxxxx>
• Re: to understand the logic of raid0_make_request
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Help with dirty RAID array
  • From: "James H. Edwards" <jedwards@xxxxxxxxxxxx>
• Re: to understand the logic of raid0_make_request
  • From: "liu yang" <liudows2@xxxxxxxxx>
• Re: Raid5 software problems after loosing 4 disks for 48 hours
  • From: Neil Brown <neilb@xxxxxxx>
• ANNOUNCE: mdadm 2.5.1 - A tool for managing Soft RAID under Linux
  • From: Neil Brown <neilb@xxxxxxx>
• Failing HDD and Mirror Raid
  • From: "Michael Rudmin" <rudmin_pen@xxxxxxx>
• Raid5 software problems after loosing 4 disks for 48 hours
  • From: "Wilson Wilson" <wilson150@xxxxxxxxx>
• Help with dirty RAID array
  • From: "James H. Edwards" <jedwards@xxxxxxxxxxxx>
• Re: Disks keep failing durning testing
  • From: Leo Kliger <lkliger@xxxxxxxxxxxxxx>
• Re: IBM xSeries stop responding during RAID1 reconstruction
  • From: Neil Brown <neilb@xxxxxxx>
• Re: IBM xSeries stop responding during RAID1 reconstruction
  • From: Niccolo Rigacci <niccolo@xxxxxxxxxxx>
• Re: raid6
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid6
  • From: Henrik Holst <henrik.holst@xxxxxxxxxx>
• raid6
  • From: "葛雄资" <xiongzige@xxxxxxxxx>
• Call for help of raid5
  • From: "葛雄资" <xiongzige@xxxxxxxxx>
• Re: Disks keep failing durning testing
  • From: Adam Talbot <talbotx@xxxxxxxxxxx>
• Re: Disks keep failing durning testing
  • From: PFC <lists@xxxxxxxxxx>
• Disks keep failing durning testing
  • From: Adam Talbot <talbotx@xxxxxxxxxxx>
• Re: IBM xSeries stop responding during RAID1 reconstruction
  • From: Bill Cizek <cizek@xxxxxxx>
• Re: RAID tuning?
  • From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
• Re: RAID tuning?
  • From: Nix <nix@xxxxxxxxxxxxx>
• IBM xSeries stop responding during RAID1 reconstruction
  • From: Niccolo Rigacci <niccolo@xxxxxxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: Neil Brown <neilb@xxxxxxx>
• A log of thanks, and some question. :)
  • From: "Janos Haar" <djani22@xxxxxxxxxxxx>
• Re: RAID tuning?
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: dean gaudet <dean@xxxxxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: to understand the logic of raid0_make_request
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: which CPU for XOR?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: And then there was Bryce...
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: RAID tuning?
  • From: Adam Talbot <talbotx@xxxxxxxxxxx>
• Re: RAID tuning?
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: RAID tuning?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID tuning?
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: RAID tuning?
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: why raid5 not like this?
  • From: Neil Brown <neilb@xxxxxxx>
• why raid5 not like this?
  • From: "舒星" <xshu2006@xxxxxxxxx>
• RAID tuning?
  • From: Adam Talbot <talbotx@xxxxxxxxxxx>
• Re: to understand the logic of raid0_make_request
  • From: Neil Brown <neilb@xxxxxxx>
• to understand the logic of raid0_make_request
  • From: "liu yang" <liudows2@xxxxxxxxx>
• Re: RAID5E
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: RAID5 troubles
  • From: Chris Osicki <osk@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: RAID5 troubles
  • From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
• Re: "command 0x25 timeout, stat 0x50 host_stat 0x1"
  • From: Andy Smith <andy@xxxxxxxxxx>
• RAID5 troubles
  • From: osk@xxxxxxxxxxxxxxxxxxxxxxxx
• Re: raid5 hang on get_active_stripe
  • From: dean gaudet <dean@xxxxxxxxxx>
• Re: Failed Hard Disk... help!
  • From: Ric Wheeler <ric@xxxxxxx>
• Re: Failed Hard Disk... help!
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Failed Hard Disk... help!
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: Failed Hard Disk... help!
  • From: Patrik Jonsson <patrik@xxxxxxxxxxx>
• Failed Hard Disk... help!
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: raid 5 read performance
  • From: Neil Brown <neilb@xxxxxxx>
• Re: which CPU for XOR?
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• raid 5 read performance
  • From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
• which CPU for XOR?
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: And then there was Bryce...
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: And then there was Bryce...
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: And then there was Bryce...
  • From: "John Stoffel" <john@xxxxxxxxxxx>
• Re: And then there was Bryce...
  • From: Bryce <bryce@xxxxxxxxxxxxxxxxxx>
• Re: And then there was Bryce...
  • From: Henrik Holst <henrik.holst@xxxxxxxxxx>
• And then there was Bryce...
  • From: Bryce <bryce@xxxxxxxxxxxxxxxxxx>
• Quick Question ..
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: Problems with device-mapper on top of RAID-5 and RAID-6
  • From: Nix <nix@xxxxxxxxxxxxx>
• Re: [PATCH] mdadm 2.5
  • From: Nix <nix@xxxxxxxxxxxxx>
• Re: problems with raid6, mdadm: RUN_ARRAY failed
  • From: Kresimir Kukulj <madmax@xxxxxxxx>
• Re: problems with raid6, mdadm: RUN_ARRAY failed
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Raid5 read error correction log
  • From: Neil Brown <neilb@xxxxxxx>
• Re: "command 0x25 timeout, stat 0x50 host_stat 0x1"
  • From: Patrik Jonsson <patrik@xxxxxxxxxxx>
• "command 0x25 timeout, stat 0x50 host_stat 0x1"
  • From: Andy Smith <andy@xxxxxxxxxxxxxx>
• Raid5 read error correction log
  • From: Patrik Jonsson <patrik@xxxxxxxxxxx>
• problems with raid6, mdadm: RUN_ARRAY failed
  • From: Kresimir Kukulj <madmax@xxxxxxxx>
• Re: Clarifications about check/repair, i.e. RAID SCRUBBING
  • From: Roy Waldspurger <rlists@xxxxxxxxxxxxxxxxx>
• Problems with device-mapper on top of RAID-5 and RAID-6
  • From: "Dr. Uwe Meyer-Gruhl" <f+gmane@xxxxxxxxxxx>
• Re: Clarifications about check/repair, i.e. RAID SCRUBBING
  • From: Neil Brown <neilb@xxxxxxx>
• Clarifications about check/repair, i.e. RAID SCRUBBING
  • From: Roy Waldspurger <rlists@xxxxxxxxxxxxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: dean gaudet <dean@xxxxxxxxxx>
• raid5e and raid5ee
  • From: stephan sperber <quinte17@xxxxxx>
• Re: [PATCH] mdadm 2.5 (Was: ANNOUNCE: mdadm 2.5 - A tool for managing Soft RAID under Linux)
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: [PATCH 008 of 10] md: Allow raid 'layout' to be read and set via sysfs.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 006 of 10] md: Set/get state of array via sysfs
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 008 of 10] md: Allow raid 'layout' to be read and set via sysfs.
  • From: Chris Wright <chrisw@xxxxxxxxxxxx>
• Re: [PATCH 006 of 10] md: Set/get state of array via sysfs
  • From: Chris Wright <chrisw@xxxxxxxxxxxx>
• [PATCH 006 of 10] md: Set/get state of array via sysfs
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 004 of 10] md: Allow re-add to work on array without bitmaps.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 005 of 10] md: Don't write dirty/clean update to spares - leave them alone
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 001 of 10] md: md Kconfig speeling feex
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 010 of 10] md: Allow the write_mostly flag to be set via sysfs.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 009 of 10] md: Allow resync_start to be set and queried via sysfs.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 008 of 10] md: Allow raid 'layout' to be read and set via sysfs.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 007 of 10] md: Allow rdev state to be set via sysfs.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 003 of 10] md: Fix bug that stops raid5 resync from happening
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 002 of 10] md: Fix Kconfig error
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 000 of 10] md: Introduction - assorted patches for -mm
  • From: NeilBrown <neilb@xxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: Neil Brown <neilb@xxxxxxx>
• Re: kernel messages when "rmmod md" module
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH] mdadm 2.5 (Was: ANNOUNCE: mdadm 2.5 - A tool for managing Soft RAID under Linux)
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5E
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH] mdadm 2.5 (Was: ANNOUNCE: mdadm 2.5 - A tool for managing Soft RAID under Linux)
  • From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
• Re: RAID5E
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: [PATCH] mdadm 2.5 (Was: ANNOUNCE: mdadm 2.5 - A tool for managing Soft RAID under Linux)
  • From: Alex Davis <alex14641@xxxxxxxxx>
• Re: RAID5E
  • From: Erik Mouw <erik@xxxxxxxxxxxxxxxxxxxxx>
• Re: RAID5E
  • From: Mattias Wadenstein <maswan@xxxxxxxxxx>
• RAID5E
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: problems with raid=noautodetect
  • From: Bill Davidsen <davidsen@xxxxxxx>
• kernel messages when "rmmod md" module
  • From: "王志坤" <raidwang@xxxxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: dean gaudet <dean@xxxxxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: dean gaudet <dean@xxxxxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: dean gaudet <dean@xxxxxxxxxx>
• Re: RAID 5 Whole Devices - Partition
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID 5 Whole Devices - Partition
  • From: "Michael Theodoulou" <michael.theodoulou@xxxxxxxxx>
• Re: adding multipath device without reboot?
  • From: "Francois Barre" <francois.barre@xxxxxxxxx>
• Re: RAID 5 Whole Devices - Partition
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: adding multipath device without reboot?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: adding multipath device without reboot?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: problems with raid=noautodetect
  • From: Luca Berra <bluca@xxxxxxxxxx>
• RAID 5 Whole Devices - Partition
  • From: "Michael Theodoulou" <michael.theodoulou@xxxxxxxxx>
• Re: problems with raid=noautodetect
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Can't get drives containing spare devices to spindown
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: adding multipath device without reboot?
  • From: "Francois Barre" <francois.barre@xxxxxxxxx>
• adding multipath device without reboot?
  • From: Herta Van den Eynde <herta.vandeneynde@xxxxxxxxxxxxxx>
• [PATCH] md: Fix badness in sysfs_notify caused by md_new_event
  • From: NeilBrown <neilb@xxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: dean gaudet <dean@xxxxxxxxxx>
• Re: problems with raid=noautodetect
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: problems with raid=noautodetect
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: [PATCH] mdadm 2.5 (Was: ANNOUNCE: mdadm 2.5 - A tool for managing Soft RAID under Linux)
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH] mdadm 2.5 (Was: ANNOUNCE: mdadm 2.5 - A tool for managing Soft RAID under Linux)
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: RAID5 kicks non-fresh drives
  • From: Neil Brown <neilb@xxxxxxx>
• Re: problems with raid=noautodetect
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: RAID5 kicks non-fresh drives
  • From: Neil Brown <neilb@xxxxxxx>
• Re: problems with raid=noautodetect
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [patch] install a static build
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH] mdadm 2.5 (Was: ANNOUNCE: mdadm 2.5 - A tool for managing Soft RAID under Linux)
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH] mdadm 2.5 (Was: ANNOUNCE: mdadm 2.5 - A tool for managing Soft RAID under Linux)
  • From: dean gaudet <dean@xxxxxxxxxx>
• Re: [PATCH] mdadm 2.5 (Was: ANNOUNCE: mdadm 2.5 - A tool for managing Soft RAID under Linux)
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: [PATCH] mdadm 2.5 (Was: ANNOUNCE: mdadm 2.5 - A tool for managing Soft RAID under Linux)
  • From: dean gaudet <dean@xxxxxxxxxx>
• [PATCH] mdadm 2.5 (Was: ANNOUNCE: mdadm 2.5 - A tool for managing Soft RAID under Linux)
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: Neil Brown <neilb@xxxxxxx>
• echo check > .../sync_action displays "resync" in mdstat
  • From: PFC <lists@xxxxxxxxxx>
• Re: "Readonly" entry in your TODO list
  • From: Patrik Jonsson <patrik@xxxxxxxxxxx>
• "Readonly" entry in your TODO list
  • From: Steve Haehnichen <steve@xxxxxxxx>
• Re: [patch] install a static build
  • From: "Dirk Jagdmann" <jagdmann@xxxxxxxxx>
• Re: [patch] fix static build
  • From: "Dirk Jagdmann" <jagdmann@xxxxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: dean gaudet <dean@xxxxxxxxxx>
• Re: [patch] fix static build
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: [patch] install a static build
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: RAID5 kicks non-fresh drives
  • From: Luca Berra <bluca@xxxxxxxxxx>
• [patch] install a static build
  • From: "Dirk Jagdmann" <jagdmann@xxxxxxxxx>
• [patch] fix static build
  • From: "Dirk Jagdmann" <jagdmann@xxxxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: dean gaudet <dean@xxxxxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID5 kicks non-fresh drives
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: RAID5 kicks non-fresh drives
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: RAID5 kicks non-fresh drives
  • From: Craig Hollabaugh <craig@xxxxxxxxxxxxxx>
• Re: RAID5 kicks non-fresh drives
  • From: Craig Hollabaugh <craig@xxxxxxxxxxxxxx>
• Re: RAID5 kicks non-fresh drives
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: RAID5 kicks non-fresh drives
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: RAID5 kicks non-fresh drives
  • From: Craig Hollabaugh <craig@xxxxxxxxxxxxxx>
• Re: RAID5 kicks non-fresh drives
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: dean gaudet <dean@xxxxxxxxxx>
• Re: RAID5 kicks non-fresh drives
  • From: Craig Hollabaugh <craig@xxxxxxxxxxxxxx>
• Re: RAID5 kicks non-fresh drives
  • From: Mikael Abrahamsson <swmike@xxxxxxxxx>
• Re: problems with raid=noautodetect
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: problems with raid=noautodetect
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: mdadm and 2.4 kernel?
  • From: Neil Brown <neilb@xxxxxxx>
• ANNOUNCE: mdadm 2.5 - A tool for managing Soft RAID under Linux
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Does software RAID take advantage of SMP, or 64 bit CPU(s)?
  • From: Nix <nix@xxxxxxxxxxxxx>
• Re: problems with raid=noautodetect - solved
  • From: Nix <nix@xxxxxxxxxxxxx>
• Re: RAID5 kicks non-fresh drives
  • From: Craig Hollabaugh <craig@xxxxxxxxxxxxxx>
• Re: RAID5 kicks non-fresh drives
  • From: Craig Hollabaugh <craig@xxxxxxxxxxxxxx>
• Re: RAID5 kicks non-fresh drives
  • From: Neil Brown <neilb@xxxxxxx>
• Re: mdadm: bitmap size
  • From: Ste <ste@xxxxxxxxxxxx>
• mdadm and 2.4 kernel?
  • From: Ste <ste@xxxxxxxxxxxx>
• RAID5 kicks non-fresh drives
  • From: Craig Hollabaugh <craig@xxxxxxxxxxxxxx>
• Re: 4 disks in raid 5: 33MB/s read performance?
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: iostat messed up with md on 2.6.16.x
  • From: Neil Brown <neilb@xxxxxxx>
• Re: 4 disks in raid 5: 33MB/s read performance?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Max. md array size under 32-bit i368 ...
  • From: Neil Brown <neilb@xxxxxxx>
• Re: 4 disks in raid 5: 33MB/s read performance?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Max. md array size under 32-bit i368 ...
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: problems with raid=noautodetect - solved
  • From: Florian Dazinger <florian.dazinger@xxxxxxx>
• Max. md array size under 32-bit i368 ...
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• iostat messed up with md on 2.6.16.x
  • From: Pallai Roland <dap@xxxxxxxxxxxxx>
• Re: raid5 disaster
  • From: Mike Hardy <mhardy@xxxxxxx>
• [RFC][PATCH] md: Move stripe operations outside the spinlock (v2)
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• raid5 disaster
  • From: Bruno Seoane <stickman@xxxxxxx>
• Re: Does software RAID take advantage of SMP, or 64 bit CPU(s)?
  • From: Adam Talbot <talbotx@xxxxxxxxxxx>
• Re: improving raid 5 performance
  • From: Neil Brown <neilb@xxxxxxx>
• improving raid 5 performance
  • From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
• Re: Does software RAID take advantage of SMP, or 64 bit CPU(s)?
  • From: Neil Brown <neilb@xxxxxxx>
• Does software RAID take advantage of SMP, or 64 bit CPU(s)?
  • From: Adam Talbot <talbotx@xxxxxxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: Neil Brown <neilb@xxxxxxx>
• Re: 4 disks in raid 5: 33MB/s read performance?
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: 4 disks in raid 5: 33MB/s read performance?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: spin_lock_irq() in handle_stripe()
  • From: Neil Brown <neilb@xxxxxxx>
• Re: problems with raid=noautodetect
  • From: Neil Brown <neilb@xxxxxxx>
• Re: 4 disks in raid 5: 33MB/s read performance?
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• 4 disks in raid 5: 33MB/s read performance?
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• spin_lock_irq() in handle_stripe()
  • From: Alex Tomas <alex@xxxxxxxxxxxxx>
• problems with raid=noautodetect
  • From: Florian Dazinger <florian.dazinger@xxxxxxx>
• Re: raid5 resize in 2.6.17 - how will it be different from raidreconf?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid5 resize in 2.6.17 - how will it be different from raidreconf?
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: mdadm: bitmap size
  • From: Ste <ste@xxxxxxxxxxxx>
• Re: [PATCH 002 of 2] md: Make sure bi_max_vecs is set properly in bio_split
  • From: Jens Axboe <axboe@xxxxxxx>
• [PATCH 001 of 2] md: Fix possible oops when starting a raid0 array
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 002 of 2] md: Make sure bi_max_vecs is set properly in bio_split
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 000 of 2] md: Introduction
  • From: NeilBrown <neilb@xxxxxxx>
• Re: mdadm: bitmap size
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid5 resize in 2.6.17 - how will it be different from raidreconf?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: raid 5 read performance
  • From: Neil Brown <neilb@xxxxxxx>
• raid5 resize in 2.6.17 - how will it be different from raidreconf?
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: raid 5 read performance
  • From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
• Re: raid 5 read performance
  • From: Neil Brown <neilb@xxxxxxx>
• raid 5 read performance
  • From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
• Re: recovery speed on many-disk RAID 1
  • From: Neil Brown <neilb@xxxxxxx>
• recovery speed on many-disk RAID 1
  • From: Jeff Breidenbach <jeff@xxxxxxx>
• Re: Raid5 resize "testing opportunity"
  • From: Per Lindstrand <mail@xxxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH] MD RAID Acceleration: Move stripe operations outside the spin lock
  • From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [RFC][PATCH] MD RAID Acceleration: Move stripe operations outside the spin lock
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Raid5 resize "testing opportunity"
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Raid5 resize "testing opportunity"
  • From: Patrik Jonsson <patrik@xxxxxxxxxxx>
• Re: mdadm: bitmap size
  • From: Neil Brown <neilb@xxxxxxx>
• mdadm: bitmap size
  • From: Ste <ste@xxxxxxxxxxxx>
• mdadm: Bitmap size
  • From: Ste <ste@xxxxxxxxxxxx>
• Re: Raid5 resize "testing opportunity"
  • From: Neil Brown <neilb@xxxxxxx>
• Raid1 resync throttling
  • From: Bill Cizek <cizek@xxxxxxx>
• Re: [PATCH 000 of 3] md: Introduction - 3 bugfixs for -mm
  • From: Neil Brown <neilb@xxxxxxx>
• copying data over NFS to raid5 array is jumpy
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Raid5 resize "testing opportunity"
  • From: Patrik Jonsson <patrik@xxxxxxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: dean gaudet <dean@xxxxxxxxxx>
• Re: [PATCH 000 of 3] md: Introduction - 3 bugfixs for -mm
  • From: Reuben Farrelly <reuben-lkml@xxxxxxxx>
• [RFC][PATCH] MD RAID Acceleration: Move stripe operations outside the spin lock
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: raid0 over 2 h/w raid5's OOPSing at mkfs
  • From: Joshua Baker-LePain <jlb17@xxxxxxxx>
• [-mm patch] make variables static after klibc merge
  • From: Adrian Bunk <bunk@xxxxxxxxx>
• Re: softraid and multiple distros
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: softraid and multiple distros
  • From: Neil Brown <neilb@xxxxxxx>
• Re: softraid and multiple distros
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: recovery from mkswap on mounted raid1 ext3 filesystem?
  • From: Dan Christensen <jdc@xxxxxx>
• Re: recovery from mkswap on mounted raid1 ext3 filesystem?
  • From: Neil Brown <neilb@xxxxxxx>
• recovery from mkswap on mounted raid1 ext3 filesystem?
  • From: Dan Christensen <jdc@xxxxxx>
• Re: [PATCH 001 of 3] md: Change md/bitmap file handling to use bmap to file blocks-fix
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 001 of 3] md: Change md/bitmap file handling to use bmap to file blocks-fix
  • From: Andrew Morton <akpm@xxxxxxxx>
• [PATCH 002 of 3] md: Fix inverted test for 'repair' directive.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 003 of 3] md: Calculate correct array size for raid10 in new offset mode.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 001 of 3] md: Change md/bitmap file handling to use bmap to file blocks-fix
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 000 of 3] md: Introduction - 3 bugfixs for -mm
  • From: NeilBrown <neilb@xxxxxxx>
• Re: raid0 over 2 h/w raid5's OOPSing at mkfs
  • From: Neil Brown <neilb@xxxxxxx>
• aesthetic request for bogus-raid warning message
  • From: Joseph Marc Olstad <solidcomputing@xxxxxxx>
• Re: [PATCH 008 of 8] md/bitmap: Change md/bitmap file handling to use bmap to file blocks.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: softraid and multiple distros
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 008 of 8] md/bitmap: Change md/bitmap file handling to use bmap to file blocks.
  • From: Andrew Morton <akpm@xxxxxxxx>
• raid0 over 2 h/w raid5's OOPSing at mkfs
  • From: Joshua Baker-LePain <jlb17@xxxxxxxx>
• Re[2]: Problem with large devices >2TB
  • From: Jim Klimov <klimov@xxxxxxxxxxx>
• Re: softraid and multiple distros
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: softraid and multiple distros
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: softraid and multiple distros
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: [PATCH 008 of 8] md/bitmap: Change md/bitmap file handling to use bmap to file blocks.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: softraid and multiple distros
  • From: Neil Brown <neilb@xxxxxxx>
• Re: softraid and multiple distros
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Problem with large devices >2TB
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• softraid and multiple distros
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: softraid and multiple distros
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 008 of 8] md/bitmap: Change md/bitmap file handling to use bmap to file blocks.
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: softraid and multiple distros
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: softraid and multiple distros
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: [PATCH 008 of 8] md/bitmap: Change md/bitmap file handling to use bmap to file blocks.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 008 of 8] md/bitmap: Change md/bitmap file handling to use bmap to file blocks.
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: Removing a RAID 1 setting without loosing data
  • From: Raúl Gómez Cabrera <raulgomezc@xxxxxxx>
• Re: [PATCH 008 of 8] md/bitmap: Change md/bitmap file handling to use bmap to file blocks.
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Re: Removing a RAID 1 setting without loosing data
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: Removing a RAID 1 setting without loosing data
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: Removing a RAID 1 setting without loosing data
  • From: Raúl Gómez Cabrera <raulgomezc@xxxxxxx>
• Re: Removing a RAID 1 setting without loosing data
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Removing a RAID 1 setting without loosing data
  • From: Raúl Gómez Cabrera <raulgomezc@xxxxxxx>
• Re: [PATCH 008 of 8] md/bitmap: Change md/bitmap file handling to use bmap to file blocks.
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: [PATCH 002 of 8] md/bitmap: Remove bitmap writeback daemon.
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: [PATCH 002 of 8] md/bitmap: Remove bitmap writeback daemon.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 008 of 8] md/bitmap: Change md/bitmap file handling to use bmap to file blocks.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 008 of 8] md/bitmap: Change md/bitmap file handling to use bmap to file blocks.
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: [PATCH 002 of 8] md/bitmap: Remove bitmap writeback daemon.
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: RAID5 excesses
  • From: Marcin Hlybin <marcin.hlybin@xxxxxxxxxx>
• Re: hardware raid 5 and software raid 0 stripe broke.
  • From: Ken <Ken@xxxxxxxxx>
• [PATCH 004 of 8] md/bitmap: Use set_bit etc for bitmap page attributes.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 007 of 8] md/bitmap: Tidy up i_writecount handling in md/bitmap
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 003 of 8] md/bitmap: Cleaner separation of page attribute handlers in md/bitmap.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 008 of 8] md/bitmap: Change md/bitmap file handling to use bmap to file blocks.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 006 of 8] md/bitmap: Remove dead code from md/bitmap.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 005 of 8] md/bitmap: Remove unnecessary page reference manipulations from md/bitmap code.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 002 of 8] md/bitmap: Remove bitmap writeback daemon.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 001 of 8] md/bitmap: Fix online removal of file-backed bitmaps
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 000 of 8] md/bitmap: Introduction - rework management of bitmap files.
  • From: NeilBrown <neilb@xxxxxxx>
• Re: hardware raid 5 and software raid 0 stripe broke.
  • From: Neil Brown <neilb@xxxxxxx>
• hardware raid 5 and software raid 0 stripe broke.
  • From: Ken <Ken@xxxxxxxxx>
• Can't get drives containing spare devices to spindown
  • From: "Marc L. de Bruin" <marc@xxxxxxxxxxx>
• Re: raid5 hang on get_active_stripe
  • From: dean gaudet <dean@xxxxxxxxxx>
• Re: RAID5 - 4 disk reboot trouble.
  • From: Guido Moonen <guido.moonen@xxxxxxx>
• Re: RAID 0 over HW RAID
  • From: Mirko Benz <mirko.benz@xxxxxx>
• Re: RAID5 - 4 disk reboot trouble.
  • From: Guido Moonen <guido.moonen@xxxxxxx>
• Re: RAID5 - 4 disk reboot trouble.
  • From: Neil Brown <neilb@xxxxxxx>
• RAID5 - 4 disk reboot trouble.
  • From: Guido Moonen <guido.moonen@xxxxxxx>
• Re: xfs or ext3?
  • From: Nix <nix@xxxxxxxxxxxxx>
• Re: RAID 0 over HW RAID
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Thanks! Was:[Re: strange RAID5 problem]
  • From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
• RAID 0 over HW RAID
  • From: Mirko Benz <mirko.benz@xxxxxx>
• xfs or ext3?
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Problem with large devices >2TB
  • From: Jim Klimov <klimov@xxxxxxxxxxx>
• Re: strange RAID5 problem
  • From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
• Re: strange RAID5 problem
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: softraid5 boot problem - partly my fault, solved
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: strange RAID5 problem
  • From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
• Re: slackware -current softraid5 boot problem - additional info
  • From: Mike Hardy <mhardy@xxxxxxx>
• Re: slackware -current softraid5 boot problem - additional info
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: strange RAID5 problem
  • From: CaT <cat@xxxxxxxxxx>
• Re: strange RAID5 problem
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: slackware -current softraid5 boot problem
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: strange RAID5 problem
  • From: Neil Brown <neilb@xxxxxxx>
• strange RAID5 problem
  • From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
• Re: [PATCH 004 of 11] md: Increase the delay before marking metadata clean, and make it configurable.
  • From: Neil Brown <neilb@xxxxxxx>
• slackware -current softraid5 boot problem
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: [PATCH 009 of 11] md: Support stripe/offset mode in raid10
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: Horrific Raid 5 crash... help!
  • From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
• Re: [PATCH 009 of 11] md: Support stripe/offset mode in raid10
  • From: Neil Brown <neilb@xxxxxxx>
• Horrific Raid 5 crash... help!
  • From: "David M. Strang" <dstrang@xxxxxxxxxxxxxx>
• Re: spam on the list
  • From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
• spam on the list
  • From: Shai <shaibn@xxxxxxxxx>
• Re: Two-disk RAID5?
  • From: Erik Mouw <erik@xxxxxxxxxxxxxxxxxxxxx>
• Re: Two-disk RAID5?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Two-disk RAID5?
  • From: John Rowe <rowe@xxxxxxxxxxxxx>
• Re: Two-disk RAID5?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Two-disk RAID5?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: disks becoming slow but not explicitly failing anyone?
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: to be or not to be...
  • From: gelma <dislessico@xxxxxxxxx>
• Re: [PATCH 009 of 11] md: Support stripe/offset mode in raid10
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: [PATCH 009 of 11] md: Support stripe/offset mode in raid10
  • From: Neil Brown <neilb@xxxxxxx>
• Re: RAID1: can't remove (or set-faulty) a disk during resync with mdadm
  • From: Gil <gil@xxxxxxxxxxxxx>
• RAID1: can't remove (or set-faulty) a disk during resync with mdadm
  • From: David Mansfield <centos@xxxxxxxxxxxxx>
• Re: [PATCH 009 of 11] md: Support stripe/offset mode in raid10
  • From: Al Boldi <a1426z@xxxxxxxxx>
• [patch] stripe_to_pdidx() cleanup
  • From: Coywolf Qi Hunt <qiyong@xxxxxxxxxxxxx>
• Re: md: Change ENOTSUPP to EOPNOTSUPP
  • From: Ric Wheeler <ric@xxxxxxx>
• Re: [PATCH 004 of 11] md: Increase the delay before marking metadata clean, and make it configurable.
  • From: bert hubert <bert.hubert@xxxxxxxxxxxxx>
• Re: md: Change ENOTSUPP to EOPNOTSUPP
  • From: Mike Hardy <mhardy@xxxxxxx>
• Re: md: Change ENOTSUPP to EOPNOTSUPP
  • From: Paul Clements <paul.clements@xxxxxxxxxxxx>
• Re: [stable] [PATCH 001 of 5] md: Avoid oops when attempting to fix read errors on raid10
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Two-disk RAID5?
  • From: Erik Mouw <erik@xxxxxxxxxxxxxxxxxxxxx>
• Re: md: Change ENOTSUPP to EOPNOTSUPP
  • From: Gil <gil@xxxxxxxxxxxxx>
• Re: [PATCH 004 of 11] md: Increase the delay before marking metadata clean, and make it configurable.
  • From: Linus Torvalds <torvalds@xxxxxxxx>
• Re: raid5 resizing
  • From: Mike Hardy <mhardy@xxxxxxx>
• Re: [PATCH 004 of 11] md: Increase the delay before marking metadata clean, and make it configurable.
  • From: Nick Piggin <nickpiggin@xxxxxxxxxxxx>
• Re: [PATCH 004 of 11] md: Increase the delay before marking metadata clean, and make it configurable.
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: [PATCH 004 of 11] md: Increase the delay before marking metadata clean, and make it configurable.
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 004 of 11] md: Increase the delay before marking metadata clean, and make it configurable.
  • From: Andrew Morton <akpm@xxxxxxxx>
• Re: [PATCH 005 of 11] md: Merge raid5 and raid6 code
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: raid5 resizing
  • From: Neil Brown <neilb@xxxxxxx>
• [PATCH 004 of 11] md: Increase the delay before marking metadata clean, and make it configurable.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 011 of 11] md: Split reshape portion of raid5 sync_request into a separate function.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 003 of 11] md: Remove useless ioctl warning.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 008 of 11] md: Allow a linear array to have drives added while active.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 010 of 11] md: make md_print_devices() static
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 009 of 11] md: Support stripe/offset mode in raid10
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 006 of 11] md: Remove nuisance message at shutdown
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 007 of 11] md: Allow checkpoint of recovery with version-1 superblock.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 002 of 11] md: Remove arbitrary limit on chunk size.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 001 of 11] md: Reformat code in raid1_end_write_request to avoid goto
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 000 of 11] md: Introduction - assort md enhancements for 2.6.18
  • From: NeilBrown <neilb@xxxxxxx>
• raid5 resizing
  • From: CaT <cat@xxxxxxxxxx>
• Re: try to write back redundant data before failing disk in raid5 setup
  • From: Neil Brown <neilb@xxxxxxx>
• Re: try to write back redundant data before failing disk in raid5 setup
  • From: Dick Snippe <Dick.Snippe@xxxxxxxxxxxxxx>
• try to write back redundant data before failing disk in raid5 setup
  • From: Dick Snippe <Dick.Snippe@xxxxxxxxxxxxxx>
• RE: [PATCH 003 of 5] md: Change ENOTSUPP to EOPNOTSUPP
  • From: Neil Brown <neilb@xxxxxxx>
• RE: [PATCH 003 of 5] md: Change ENOTSUPP to EOPNOTSUPP
  • From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
• Re: RFC: PATCH
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [PATCH 003 of 5] md: Change ENOTSUPP to EOPNOTSUPP
  • From: Neil Brown <neilb@xxxxxxx>
• Re: md: Change ENOTSUPP to EOPNOTSUPP
  • From: Ric Wheeler <ric@xxxxxxx>
• strange things going on, raid5&evms
  • From: Christian Pedaschus <cpedaschus@xxxxxx>
• Re: RAID-related: SATA disk removal?
  • From: "Diego M. Vadell" <dvadell@xxxxxxxxxxxxxxxxxxxx>
• Re: RAID-related: SATA disk removal?
  • From: John Rowe <rowe@xxxxxxxxxxxxx>
• Re: RAID-related: SATA disk removal?
  • From: "Diego M. Vadell" <dvadell@xxxxxxxxxxxxxxxxxxxx>
• Re: md: Change ENOTSUPP to EOPNOTSUPP
  • From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
• RFC: PATCH
  • From: "Dennis Stout" <stoutman@xxxxxxxxx>
• Re: [PATCH 003 of 5] md: Change ENOTSUPP to EOPNOTSUPP
  • From: Ric Wheeler <ric@xxxxxxx>
• RAID-related: SATA disk removal?
  • From: John Rowe <rowe@xxxxxxxxxxxxx>
• Re: [PATCH 003 of 5] md: Change ENOTSUPP to EOPNOTSUPP
  • From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
• [PATCH 004 of 5] md: Improve detection of lack of barrier support in raid1
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 005 of 5] md: Fix 'rdev->nr_pending' count when retrying barrier requests.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 002 of 5] md: Fixed refcounting/locking when attempting read error correction in raid10
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 003 of 5] md: Change ENOTSUPP to EOPNOTSUPP
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 000 of 5] md: Introduction - assorted raid10/raid1 fixes
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 001 of 5] md: Avoid oops when attempting to fix read errors on raid10
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Controlling Reading and Writing in RAID 1 configuration
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: Mdadm -- how to add another device in a linear mode?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Mdadm -- how to add another device in a linear mode?
  • From: "Ian! D. Allen" <idallen@xxxxxxxxxx>
• Re: Controlling Reading and Writing in RAID 1 configuration
  • From: Neil Brown <neilb@xxxxxxx>
• RE: Infinite fail-retry loop on degraded RAID1 array
  • From: "Matt Harding" <Matt.Harding@xxxxxx>
• Re: Controlling Reading and Writing in RAID 1 configuration
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: Infinite fail-retry loop on degraded RAID1 array
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Controlling Reading and Writing in RAID 1 configuration
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Two-disk RAID5?
  • From: Al Boldi <a1426z@xxxxxxxxx>
• Re: disks becoming slow but not explicitly failing anyone?
  • From: Konstantin Olchanski <olchansk@xxxxxxxxx>
• Re: Trying to start dirty, degraded RAID6 array
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Trying to start dirty, degraded RAID6 array
  • From: Christopher Smith <csmith@xxxxxxxxxxxxxxxx>
• Re: linear writes to raid5
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Trying to start dirty, degraded RAID6 array
  • From: Neil Brown <neilb@xxxxxxx>
• Trying to start dirty, degraded RAID6 array
  • From: Christopher Smith <csmith@xxxxxxxxxxxxxxxx>
• RE: Two-disk RAID5?
  • From: Neil Brown <neilb@xxxxxxx>
• RE: Two-disk RAID5?
  • From: Jon Lewis <jlewis@xxxxxxxxx>
• RE: Two-disk RAID5?
  • From: "Jansen, Frank" <fjansen@xxxxxxxxxxx>
• Re: Two-disk RAID5?
  • From: "Tuomas Leikola" <tuomas.leikola@xxxxxxxxx>
• Re: Two-disk RAID5?
  • From: Jon Lewis <jlewis@xxxxxxxxx>
• Two-disk RAID5?
  • From: John Rowe <rowe@xxxxxxxxxxxxx>
• Re: Problem with 5disk RAID5 array - two drives lost
  • From: Tim Bostrom <tbostrom@xxxxxxxxxxxx>
• Infinite fail-retry loop on degraded RAID1 array
  • From: "Matt Harding" <Matt.Harding@xxxxxx>
• Re: Problem with 5disk RAID5 array - two drives lost
  • From: Tim Bostrom <tbostrom@xxxxxxxxxxxx>
• Controlling Reading and Writing in RAID 1 configuration
  • From: Rik Herrin <rikherrin@xxxxxxxxx>
• Re: [patch 1/2] raid6_end_write_request() spinlock fix
  • From: Coywolf Qi Hunt <qiyong@xxxxxxxxx>
• Re: [patch 1/2] raid6_end_write_request() spinlock fix
  • From: Neil Brown <neilb@xxxxxxx>
• Re: [patch 1/2] raid6_end_write_request() spinlock fix
  • From: Coywolf Qi Hunt <qiyong@xxxxxxxxx>
• Re: [patch 1/2] raid6_end_write_request() spinlock fix
  • From: Neil Brown <neilb@xxxxxxx>
• [patch 2/2] raid6_unplug_device() fix
  • From: Coywolf Qi Hunt <qiyong@xxxxxxxxx>
• [patch 1/2] raid6_end_write_request() spinlock fix
  • From: Coywolf Qi Hunt <qiyong@xxxxxxxxx>
• Anyone with experience with Acronis TrueImage for Linux 9.1 and MD/Software RAID
  • From: "Colin McDonald" <ce.mcdonald@xxxxxxxxx>
• Re: disks becoming slow but not explicitly failing anyone?
  • From: Nix <nix@xxxxxxxxxxxxx>
• Re: Raid5 & Debian Yaird Woes
  • From: Jonas Smedegaard <dr@xxxxxxxx>
• Re: Raid5 & Debian Yaird Woes
  • From: Jonas Smedegaard <dr@xxxxxxxx>
• Re: to be or not to be...
  • From: gelma <dislessico@xxxxxxxxx>
• Re: Problem with 5disk RAID5 array - two drives lost
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: Recovery speed at 1MB/s/device, unable to change
  • From: Anssi Hannula <anssi.hannula@xxxxxxxxx>
• Re: Problem with 5disk RAID5 array - two drives lost
  • From: Arthur Britto <ahbritto@xxxxxxx>
• proactive raid5 disk replacement success (using bitmap + raid1)
  • From: dean gaudet <dean@xxxxxxxxxx>
• Re: Problem with 5disk RAID5 array - two drives lost
  • From: Tim Bostrom <tbostrom@xxxxxxxxxxxx>
• Re: Recovery speed at 1MB/s/device, unable to change
  • From: Anssi Hannula <anssi.hannula@xxxxxxxxx>
• Re: Recovery speed at 1MB/s/device, unable to change
  • From: Anssi Hannula <anssi.hannula@xxxxxxxxx>
• Re: EVMS causing problems with mdadm?
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Recovery speed at 1MB/s/device, unable to change
  • From: Neil Brown <neilb@xxxxxxx>
• Re: EVMS causing problems with mdadm?
  • From: Neil Brown <neilb@xxxxxxx>
• Re: to be or not to be...
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Recovery speed at 1MB/s/device, unable to change
  • From: Anssi Hannula <anssi.hannula@xxxxxxxxx>
• Recovery speed at 1MB/s/device, unable to change
  • From: Anssi Hannula <anssi.hannula@xxxxxxxxx>
• Re: disks becoming slow but not explicitly failing anyone?
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: replace disk in raid5 without linux noticing?
  • From: Martin Cracauer <cracauer@xxxxxxxx>
• EVMS causing problems with mdadm?
  • From: "Ewan Grantham" <ewan.grantham@xxxxxxxxx>
• Re: to be or not to be...
  • From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
• Re: disks becoming slow but not explicitly failing anyone?
  • From: Nix <nix@xxxxxxxxxxxxx>
• to be or not to be...
  • From: gelma <dislessico@xxxxxxxxx>
• Re: Unable to add write-intent bitmap
  • From: Arthur Britto <ahbritto@xxxxxxx>
• Re: data recovery on raid5
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Unable to add write-intent bitmap
  • From: Neil Brown <neilb@xxxxxxx>
• Re: disks becoming slow but not explicitly failing anyone?
  • From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
• Re: data recovery on raid5
  • From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
• Re: data recovery on raid5
  • From: David Greaves <david@xxxxxxxxxxxx>
• Unable to add write-intent bitmap
  • From: Arthur Britto <ahbritto@xxxxxxx>
• Re: data recovery on raid5
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: data recovery on raid5
  • From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
• Re: data recovery on raid5
  • From: Christian Pedaschus <cpedaschus@xxxxxx>
• Re: data recovery on raid5
  • From: Mike Tran <mhtran@xxxxxxxxxx>
• Re: data recovery on raid5
  • From: Jonathan <jrs@xxxxxxxxxx>
• Re: data recovery on raid5
  • From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
• Re: data recovery on raid5
  • From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
• Re: data recovery on raid5
  • From: Jonathan <jrs@xxxxxxxxxx>
• Re: data recovery on raid5
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: data recovery on raid5
  • From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
• Re: data recovery on raid5
  • From: Jonathan <jrs@xxxxxxxxxx>
• disks becoming slow but not explicitly failing anyone?
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: Problem with 5disk RAID5 array - two drives lost
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: Problem with 5disk RAID5 array - two drives lost
  • From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
• Re: data recovery on raid5
  • From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
• Re: Problem with 5disk RAID5 array - two drives lost
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: Problem with 5disk RAID5 array - two drives lost
  • From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
• Re: data recovery on raid5
  • From: Jonathan <jrs@xxxxxxxxxx>
• Re: replace disk in raid5 without linux noticing?
  • From: Martin Cracauer <cracauer@xxxxxxxx>
• Re: data recovery on raid5
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: replace disk in raid5 without linux noticing?
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: data recovery on raid5
  • From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
• Possible Bitmap-bug in raid(1) !
  • From: "JaniD++" <djani22@xxxxxxxxxxxxx>
• Re: data recovery on raid5
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: data recovery on raid5
  • From: Mike Hardy <mhardy@xxxxxxx>
• data recovery on raid5
  • From: Sam Hopkins <sah@xxxxxxxxxx>
• Re: help wanted - 6-disk raid5 borked: _ _ U U U U
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: replace disk in raid5 without linux noticing?
  • From: carlos@xxxxxxxxxxxxxx (Carlos Carvalho)
• Re: replace disk in raid5 without linux noticing?
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• too small chunk_size: 4096 < 8192
  • From: "Bailey, Scott" <scott.bailey@xxxxxxx>
• raid 5 growing
  • From: majek <majekreiser@xxxxxxxxxxxxx>
• Re: replace disk in raid5 without linux noticing?
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: replace disk in raid5 without linux noticing?
  • From: Gabor Gombas <gombasg@xxxxxxxxx>
• Re: help wanted - 6-disk raid5 borked: _ _ U U U U
  • From: Gabor Gombas <gombasg@xxxxxxxxx>
• RAID5 excesses
  • From: Marcin Hlybin <marcin.hlybin@xxxxxxxxxx>
• Linux-raid wiki
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: Soft lockup with 2.6.17-rc1 on amd64
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: failed to RUN_ARRAY, input/output error
  • From: Johnny Ljunggren <johnny@xxxxxxxxx>
• Vijay - RAID restore question
  • From: "Vijay Ramnarayan" <vijay.ramnarayan@xxxxxxxxxxxx>
• [patch] raid5_unplug_device() fix
  • From: qiyong <qiyong@xxxxxxxxx>
• Re: linear writes to raid5
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Soft lockup with 2.6.17-rc1 on amd64
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Soft lockup with 2.6.17-rc1 on amd64
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Raid5 says it's rebuilding, but it lies :)
  • From: "Karl Schricker" <k_schricker@xxxxxxx>
• Re: Soft lockup with 2.6.17-rc1 on amd64
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Re: might_sleep warnings in gereric_make_request
  • From: Matthew Wilcox <matthew@xxxxxx>
• Re: might_sleep warnings in gereric_make_request
  • From: Matthew Wilcox <matthew@xxxxxx>
• might_sleep warnings in gereric_make_request
  • From: "Zhikun Wang" <raidwang@xxxxxxxxx>
• Soft lockup with 2.6.17-rc1 on amd64
  • From: "Steinar H. Gunderson" <sgunderson@xxxxxxxxxxx>
• Re: Using LVM for RAID 1+0
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Using LVM for RAID 1+0
  • From: "Ewan Grantham" <ewan.grantham@xxxxxxxxx>
• Re: linear writes to raid5
  • From: Neil Brown <neilb@xxxxxxx>
• Re: linear writes to raid5
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Using LVM for RAID 1+0
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Using LVM for RAID 1+0
  • From: David Greaves <david@xxxxxxxxxxxx>
• Re: Using LVM for RAID 1+0
  • From: "Ewan Grantham" <ewan.grantham@xxxxxxxxx>
• Re: linear writes to raid5
  • From: Alex Tomas <alex@xxxxxxxxxxxxx>
• Problem with 5disk RAID5 array - two drives lost
  • From: Tim Bostrom <tbostrom@xxxxxxxxxxxx>
• Re: linear writes to raid5
  • From: Alex Tomas <alex@xxxxxxxxxxxxx>
• Suppress your appetite
  • From: "Lon Hutchins" <xukvrzmudkqfxi@xxxxxxxxxxxxxxx>
• Re: replace disk in raid5 without linux noticing?
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: replace disk in raid5 without linux noticing?
  • From: Brendan Conoboy <synk@xxxxxxxx>
• Re: replace disk in raid5 without linux noticing?
  • From: Ming Zhang <mingz@xxxxxxxxxxx>
• Re: Raid5 says it's rebuilding, but it lies :)
  • From: "Karl Schricker" <k_schricker@xxxxxxx>
• Re: replace disk in raid5 without linux noticing?
  • From: Shai <shaibn@xxxxxxxxx>
• replace disk in raid5 without linux noticing?
  • From: Dexter Filmore <Dexter.Filmore@xxxxxx>
• Re: RAID5 recovery trouble, bd_claim failed?
  • From: Nate Byrnes <nate@xxxxxxxxx>
• Re: RAID5 recovery trouble, bd_claim failed?
  • From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
• Re: RAID5 recovery trouble, bd_claim failed?
  • From: Nate Byrnes <nate@xxxxxxxxx>
• Re: RAID5 recovery trouble, bd_claim failed?
  • From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
• RAID - automatic repair
  • From: Jarosław Tabor <jarek@xxxxxx>
• Re: Raid5 says it's rebuilding, but it lies :)
  • From: David Greaves <david@xxxxxxxxxxxx>
• Rebuilding RAID6 after wrongly marked "faulty" drives
  • From: "James Sutherland" <J.A.Sutherland@xxxxxxxxxxxx>
• Re: Real Time Mirroring of a NAS
  • From: Tim Moore <linux-raid@xxxxxxxxxx>
• Re: Using LVM for RAID 1+0
  • From: Neil Brown <neilb@xxxxxxx>
• Re: Using LVM for RAID 1+0
  • From: "Ewan Grantham" <ewan.grantham@xxxxxxxxx>
• Re: Raid5 says it's rebuilding, but it lies :)
  • From: Neil Brown <neilb@xxxxxxx>