Linux RAID Storage Date Index

Thread Index

Re: Superblock checksum problems
- From: Josh Litherland <josh@xxxxxxxxxxx>
Re: Superblock checksum problems
- From: Josh Litherland <josh@xxxxxxxxxxx>
Re: RAID over Firewire
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: Can you IMAGE Mirrored OS Drives?
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: RAID5 producing fake partition table on single drive
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: RAID over Firewire
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Linux: Why software RAID?
- From: Joel Jaeggli <joelja@xxxxxxxxxxx>
Re: Linux: Why software RAID?
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Linux: Why software RAID?
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Interesting RAID checking observations
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Raid5 reads and cpu
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: PROBLEM: system crash on AMD64 with 2.6.17.11 while accessing 3TB Software-RAID5
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: 3ware glitches cause softraid rebuilds
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Feature Request/Suggestion - "Drive Linking"
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Interesting RAID checking observations - I'm getting it too
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: RAID6 fallen apart
- From: Ferenc Wagner <wferi@xxxxxxx>
Re: Superblock checksum problems
- From: Josh Litherland <josh@xxxxxxxxxxx>
checkarray: E: no kernel support for parity checks.
- From: Guillaume Filion <gfk@xxxxxxxxxxx>
Re: Strange IO stats on RAID1?
- From: Paul Waldo <pwaldo@xxxxxxxxxxxxx>
Re: RAID-5 recovery
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Re: Raid5 reads and cpu
- From: Neil Brown <neilb@xxxxxxx>
Re: RAID6 Problem (in conjunction with nested LVM and encryption)
- From: Neil Brown <neilb@xxxxxxx>
Re: RAID6 Problem (in conjunction with nested LVM and encryption)
- From: Bodo Thiesen <bothie@xxxxxx>
Re: Newbie: Kernel panic during RAID1 test & reboot loses one disk
- From: Neil Brown <neilb@xxxxxxx>
Re: [PATCH 001 of 4] md: Define backing_dev_info.congested_fn for raid0 and linear
- From: Neil Brown <neilb@xxxxxxx>
Re: Strange IO stats on RAID1?
- From: Neil Brown <neilb@xxxxxxx>
Re: mdadm dynamic multipathing
- From: Neil Brown <neilb@xxxxxxx>
Re: Superblock checksum problems
- From: Neil Brown <neilb@xxxxxxx>
Re: RAID6 Problem (in conjunction with nested LVM and encryption)
- From: Neil Brown <neilb@xxxxxxx>
Re: RAID-5 recovery
- From: Neil Brown <neilb@xxxxxxx>
RAID-0 on the Intel ICH7R chipset and swap configuration...
- From: "Julio Meca Hansen" <julio28@xxxxxxxxxxxxxxxx>
Re: RAID-5 recovery
- From: "Martin Schröder" <martin@xxxxxxxxxx>
Re: RAID-5 recovery
- From: Clive Messer <clive@xxxxxxxxxxxxxxxxx>
Re: RAID-5 recovery
- From: Clive Messer <clive@xxxxxxxxxxxxxxxxx>
Re: RAID-5 recovery
- From: dean gaudet <dean@xxxxxxxxxx>
Re: serious trouble - raid5 won't assemble properly, vgscan sees no volumes - solved
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Re: Feature Request/Suggestion - "Drive Linking"
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: RAID6 fallen apart
- From: "Tuomas Leikola" <tuomas.leikola@xxxxxxxxx>
Re: RAID6 fallen apart
- From: "Tuomas Leikola" <tuomas.leikola@xxxxxxxxx>
Re: Feature Request/Suggestion - "Drive Linking"
- From: "Tuomas Leikola" <tuomas.leikola@xxxxxxxxx>
Re: RAID-5 recovery
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Re: Kernel RAID support
- From: "John Stoffel" <john@xxxxxxxxxxx>
Re: Kernel RAID support
- From: David Greaves <david@xxxxxxxxxxxx>
RAID-5 recovery
- From: Clive Messer <clive@xxxxxxxxxxxxxxxxx>
Re: Kernel RAID support
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: Kernel RAID support
- From: Josh Litherland <josh@xxxxxxxxxxx>
Kernel RAID support
- From: Richard Scobie <richard@xxxxxxxxxxx>
RAID6 Problem (in conjunction with nested LVM and encryption)
- From: Bodo Thiesen <bothie@xxxxxx>
Superblock checksum problems
- From: Josh Litherland <josh@xxxxxxxxxxx>
serious trouble - raid5 won't assemble properly, vgscan sees no volumes
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
mdadm dynamic multipathing
- From: "D. Lane Ware" <dlware@xxxxxxxxxxxx>
Re: SATA ontrollers and Linux MD
- From: Alex Davis <alex14641@xxxxxxxxx>
Re[2]: PROBLEM: system crash on AMD64 with 2.6.17.11 while accessing 3TB Software-RAID5
- From: Ralf Herrmann <Ralf.Herrmann@xxxxxxxxxxxxx>
RE: SATA ontrollers and Linux MD
- From: "Ruth Ivimey-Cook" <Ruth.Ivimey-Cook@xxxxxxxxxx>
Re: SATA ontrollers and Linux MD
- From: Lem <l3mming@xxxxxxxxxxxx>
Re: PROBLEM: system crash on AMD64 with 2.6.17.11 while accessing 3TB Software-RAID5
- From: Neil Brown <neilb@xxxxxxx>
Re: SATA ontrollers and Linux MD
- From: Alex Davis <alex14641@xxxxxxxxx>
SATA ontrollers and Linux MD
- From: "Ruth Ivimey-Cook" <Ruth.Ivimey-Cook@xxxxxxxxxx>
Strange IO stats on RAID1?
- From: Paul Waldo <pwaldo@xxxxxxxxxxxxx>
Interesting RAID checking observations - I'm getting it too
- From: Mark Smith <nanog@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Re: Feature Request/Suggestion - "Drive Linking"
- From: dean gaudet <dean@xxxxxxxxxx>
Feature Request/Suggestion - "Drive Linking"
- From: Neil Bortnak <linux-raid@xxxxxxx>
Re: RAID5 producing fake partition table on single drive
- From: Lem <l3mming@xxxxxxxxxxxx>
Re: [PATCH 002 of 4] md: Define ->congested_fn for raid1, raid10, and multipath
- From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
Re: [PATCH 001 of 4] md: Define backing_dev_info.congested_fn for raid0 and linear
- From: Andrew Morton <akpm@xxxxxxxx>
[PATCH 003 of 4] md: Add a ->congested_fn function for raid5/6
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 004 of 4] md: Make messages about resync/recovery etc more specific.
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 002 of 4] md: Define ->congested_fn for raid1, raid10, and multipath
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 000 of 4] md: Introduction
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 001 of 4] md: Define backing_dev_info.congested_fn for raid0 and linear
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID6 fallen apart
- From: Neil Brown <neilb@xxxxxxx>
Re: 3ware glitches cause softraid rebuilds
- From: "adam radford" <aradford@xxxxxxxxx>
Re: 3ware glitches cause softraid rebuilds
- From: "adam radford" <aradford@xxxxxxxxx>
3ware glitches cause softraid rebuilds
- From: Jim Klimov <klimov@xxxxxxxxxxx>
Re: Newbie: Kernel panic during RAID1 test & reboot loses one disk
- From: James Brown <jbrown@xxxxxxxxxx>
PROBLEM: system crash on AMD64 with 2.6.17.11 while accessing 3TB Software-RAID5
- From: Ralf Herrmann <Ralf.Herrmann@xxxxxxxxxxxxx>
Re: Newbie: Kernel panic during RAID1 test & reboot loses one disk
- From: James Brown <jbrown@xxxxxxxxxx>
Raid5 reads and cpu
- From: "Rob Bray" <raid@xxxxxxxxxxx>
Raid5 reads and cpu
- From: "Rob Bray" <raid@xxxxxxxxxxx>
Re: RAID6 fallen apart
- From: Ferenc Wagner <wferi@xxxxxxx>
RE: md: only binds to one mirror after reboot
- From: "Andreas Pelzner" <Andreas.Pelzner@xxxxxxxxxxxxx>
Re: Interesting RAID checking observations
- From: linux@xxxxxxxxxxx
Re: Interesting RAID checking observations
- From: linux@xxxxxxxxxxx
Re: RAID6 fallen apart
- From: Neil Brown <neilb@xxxxxxx>
Re: RAID6 fallen apart
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
[PATCH] mdadm -As --auto=yes fails if some of the md are already active
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: Resize on dirty array?
- From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
Re: Question regarding superblocks
- From: "Norm Legit" <normlegit@xxxxxxxxx>
RE: md: only binds to one mirror after reboot
- From: Neil Brown <neilb@xxxxxxx>
RE: md: only binds to one mirror after reboot
- From: "Andreas Pelzner" <Andreas.Pelzner@xxxxxxxxxxxxx>
Re: Resize on dirty array?
- From: Neil Brown <neilb@xxxxxxx>
Re: raid5 write performance
- From: Neil Brown <neilb@xxxxxxx>
Re: raid5 grow problem
- From: Neil Brown <neilb@xxxxxxx>
Re: [bug?] raid1 integrity checking is broken on 2.6.18-rc4
- From: Neil Brown <neilb@xxxxxxx>
Re: RAID5 producing fake partition table on single drive
- From: Neil Brown <neilb@xxxxxxx>
Re: invalid superblock - *again*
- From: Neil Brown <neilb@xxxxxxx>
Re: RAID6 fallen apart
- From: Neil Brown <neilb@xxxxxxx>
Re: Question regarding superblocks
- From: Neil Brown <neilb@xxxxxxx>
Question regarding superblocks
- From: "Norm Legit" <normlegit@xxxxxxxxx>
Re: Newbie: Kernel panic during RAID1 test & reboot loses one disk
- From: Neil Brown <neilb@xxxxxxx>
RE: md: only binds to one mirror after reboot
- From: Neil Brown <neilb@xxxxxxx>
Re: Interesting RAID checking observations
- From: Neil Brown <neilb@xxxxxxx>
Re: Recommended kernel?
- From: Neil Brown <neilb@xxxxxxx>
Recommended kernel?
- From: Jeff Breidenbach <jeff@xxxxxxx>
[PATCH 002 of 4] md: Factor out part of raid1d into a separate function
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 003 of 4] md: Remove working_disks from raid1 state data
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 004 of 4] md: Improve locking around error handling
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 001 of 4] md: Fix issues with referencing rdev in md/raid1
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 000 of 4] md: Introduction - some revised/reordered patches.
- From: NeilBrown <neilb@xxxxxxx>
Re: Interesting RAID checking observations
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
RE: md: only binds to one mirror after reboot
- From: "Andreas Pelzner" <Andreas.Pelzner@xxxxxxxxxxxxx>
Interesting RAID checking observations
- From: linux@xxxxxxxxxxx
Newbie: Kernel panic during RAID1 test & reboot loses one disk
- From: James Brown <jbrown@xxxxxxxxxx>
Re: Linux: Why software RAID?
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: [PATCH-stable16] Fix a potential NULL dereference in md/raid1
- From: Adrian Bunk <bunk@xxxxxxxxx>
Re: Linux: Why software RAID?
- From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
Re: Linux: Why software RAID?
- From: linux@xxxxxxxxxxx
RAID6 fallen apart
- From: Wagner Ferenc <wferi@xxxxxxx>
Re: Correct way to create multiple RAID volumes with hot-spare?
- From: Steve Cousins <steve.cousins@xxxxxxxxx>
Re: Correct way to create multiple RAID volumes with hot-spare?
- From: Steve Cousins <steve.cousins@xxxxxxxxx>
Re: [PATCH 000 of 4] md: Introduction
- From: Neil Brown <neilb@xxxxxxx>
Re: [PATCH 000 of 4] md: Introduction
- From: Andrew Morton <akpm@xxxxxxxx>
Re: Linux: Why software RAID?
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: md: only binds to one mirror after reboot
- From: "Rob Bray" <raid@xxxxxxxxxxx>
md: only binds to one mirror after reboot
- From: "Andreas Pelzner" <Andreas.Pelzner@xxxxxxxxxxxxx>
Re: strange raid6 assembly problem
- From: "H. Peter Anvin" <hpa@xxxxxxxxx>
Re: Linux: Why software RAID?
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Re: Linux: Why software RAID?
- From: Mark Lord <lkml@xxxxxx>
Re: Linux: Why software RAID?
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Re: Linux: Why software RAID?
- From: Adam Kropelin <akropel1@xxxxxxxxxxxxxxxx>
Re: Linux: Why software RAID?
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Re: Linux: Why software RAID?
- From: Adam Kropelin <akropel1@xxxxxxxxxxxxxxxx>
strange raid6 assembly problem
- From: Mickael Marchand <mikmak@xxxxxxxxxxx>
Re: RAID over Firewire
- From: "Francois Barre" <francois.barre@xxxxxxxxx>
Re: Linux: Why software RAID?
- From: Jeff Garzik <jeff@xxxxxxxxxx>
[PATCH 003 of 4] md: new sysfs interface for setting bits in the write-intent-bitmap
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 004 of 4] md: Remove unnecessary variable x in stripe_to_pdidx().
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 002 of 4] md: Fix issues with referencing rdev in md/raid1.
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 001 of 4] md: Fix recent breakage of md/raid1 array checking
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 000 of 4] md: Introduction
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 002 of 2] md: replace magic numbers in sb_dirty with well defined bit flags
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 001 of 2] md: Avoid backward event updates in md superblock when degraded.
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 000 of 2] md: Fix a bug with backward event updates.
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID over Firewire
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Re: Linux: Why software RAID?
- From: Mattias Wadenstein <maswan@xxxxxxxxxx>
Re: Linux: Why software RAID?
- From: "H. Peter Anvin" <hpa@xxxxxxxxx>
Re: Linux: Why software RAID?
- From: "Chris Friesen" <cfriesen@xxxxxxxxxx>
Re: Linux: Why software RAID?
- From: Richard Scobie <richard@xxxxxxxxxxx>
Linux: Why software RAID?
- From: Jeff Garzik <jeff@xxxxxxxxxx>
Re: Correct way to create multiple RAID volumes with hot-spare?
- From: Neil Brown <neilb@xxxxxxx>
Re: RAID over Firewire
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: RAID over Firewire
- From: Mike Hardy <mhardy@xxxxxxx>
Re: RAID over Firewire
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: RAID over Firewire
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: Correct way to create multiple RAID volumes with hot-spare?
- From: Joshua Baker-LePain <jlb17@xxxxxxxx>
Re: Correct way to create multiple RAID volumes with hot-spare?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: RAID over Firewire
- From: "Martin Schröder" <martin@xxxxxxxxxx>
Re: RAID over Firewire
- From: Gregory Seidman <gsslist+linuxraid@xxxxxxxxxxxxxxxxxx>
RAID over Firewire
- From: Richard Scobie <richard@xxxxxxxxxxx>
Correct way to create multiple RAID volumes with hot-spare?
- From: Steve Cousins <steve.cousins@xxxxxxxxx>
Re: Can you IMAGE Mirrored OS Drives?
- From: Gabor Gombas <gombasg@xxxxxxxxx>
Re: invalid superblock - *again*
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Re: RAID-6 check slow..
- From: Brad Campbell <brad@xxxxxxxxxxx>
Re: RAID-6 check slow..
- From: Neil Brown <neilb@xxxxxxx>
RAID-6 check slow..
- From: Brad Campbell <brad@xxxxxxxxxxx>
Re: smal mdadm 1.5 bug
- From: Neil Brown <neilb@xxxxxxx>
Re: invalid superblock - *again*
- From: Neil Brown <neilb@xxxxxxx>
Re: invalid superblock - *again*
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Re: RAID5 producing fake partition table on single drive
- From: Doug Ledford <dledford@xxxxxxxxxx>
[patch 19/20] MD: Fix a potential NULL dereference in md/raid1
- From: Greg KH <gregkh@xxxxxxx>
Re: [stable] [PATCH] Fix a potential NULL dereference in md/raid1
- From: Greg KH <greg@xxxxxxxxx>
smal mdadm 1.5 bug
- From: jwillem <jwillem@xxxxxxxxx>
Re: invalid superblock - why?
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Re: RAID5 producing fake partition table on single drive
- From: Lem <l3mming@xxxxxxxxxxxx>
Re: RAID5 producing fake partition table on single drive
- From: Neil Brown <neilb@xxxxxxx>
Re: invalid superblock - why?
- From: Neil Brown <neilb@xxxxxxx>
Re: remark and RFC
- From: Neil Brown <neilb@xxxxxxx>
Re: [PATCH-stable16] Fix a potential NULL dereference in md/raid1
- From: Adrian Bunk <bunk@xxxxxxxxx>
Re: [PATCH-stable16] Fix a potential NULL dereference in md/raid1
- From: Neil Brown <neilb@xxxxxxx>
[PATCH] Fix a potential NULL dereference in md/raid1
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH-stable16] Fix a potential NULL dereference in md/raid1
- From: Adrian Bunk <bunk@xxxxxxxxx>
[PATCH-stable16] Fix a potential NULL dereference in md/raid1
- From: NeilBrown <neilb@xxxxxxx>
Re: raid1 oops, 2.6.16
- From: Neil Brown <neilb@xxxxxxx>
invalid superblock - why?
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
RAID5 producing fake partition table on single drive
- From: Lem <l3mming@xxxxxxxxxxxx>
Re: remark and RFC
- From: "Peter T. Breuer" <ptb@xxxxxxxxxxxxxx>
Re: Can you IMAGE Mirrored OS Drives?
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: remark and RFC
- From: Gabor Gombas <gombasg@xxxxxxxxx>
Re: Can you IMAGE Mirrored OS Drives?
- From: Gabor Gombas <gombasg@xxxxxxxxx>
Re: Can you IMAGE Mirrored OS Drives?
- From: Gabor Gombas <gombasg@xxxxxxxxx>
Re: raid1 oops, 2.6.16
- From: Paul Clements <paul.clements@xxxxxxxxxxxx>
Re: [bug?] raid1 integrity checking is broken on 2.6.18-rc4
- From: raid@xxxxxxxxxxx
Re: raid5 grow problem
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: remark and RFC
- From: "Peter T. Breuer" <ptb@xxxxxxxxxxxxxx>
Re: [bug?] raid1 integrity checking is broken on 2.6.18-rc4
- From: Chuck Ebbert <76306.1226@xxxxxxxxxxxxxx>
Re: [patch] raid1: allow user to force reads from a specific disk
- From: Pavel Machek <pavel@xxxxxxx>
Re: raid5 grow problem
- From: "舒星" <xshu2006@xxxxxxxxx>
Re: remark and RFC
- From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
Re: raid5 grow problem
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: spurious dots in dmesg when reconstructing arrays
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: spurious dots in dmesg when reconstructing arrays
- From: Neil Brown <neilb@xxxxxxx>
spurious dots in dmesg when reconstructing arrays
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: raid5 grow problem
- From: "舒星" <xshu2006@xxxxxxxxx>
Re: raid5 grow problem
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: remark and RFC
- From: "Peter T. Breuer" <ptb@xxxxxxxxxxxxxx>
raid5 grow problem
- From: "舒星" <xshu2006@xxxxxxxxx>
Re: remark and RFC
- From: Neil Brown <neilb@xxxxxxx>
Re: Failed create or resync - incorrect checksums
- From: Neil Brown <neilb@xxxxxxx>
Failed create or resync - incorrect checksums
- From: "Richard Taylor" <ryo.away@xxxxxxxxx>
Re: Making bootable SATA RAID1 array in Mandriva 2006
- From: Nix <nix@xxxxxxxxxxxxx>
Re: remark and RFC
- From: Nix <nix@xxxxxxxxxxxxx>
Re: Imaging Mirrored OS Drives
- From: andy liebman <andyliebman@xxxxxxx>
Re: remark and RFC
- From: "Peter T. Breuer" <ptb@xxxxxxxxxxxxxx>
Re: remark and RFC
- From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
Re: Imaging Mirrored OS Drives
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: Imaging Mirrored OS Drive
- From: andy liebman <andyliebman@xxxxxxx>
Re: remark and RFC
- From: "Peter T. Breuer" <ptb@xxxxxxxxxxxxxx>
RE: Imaging Mirrored OS Drives
- From: raid@xxxxxxxxxxx
RE: Imaging Mirrored OS Drives
- From: raid@xxxxxxxxxxx
Re: Imaging Mirrored OS Drives
- From: andy liebman <andyliebman@xxxxxxx>
Re: Is mdadm --create safe for existing arrays ?
- From: dean gaudet <dean@xxxxxxxxxx>
Re: remark and RFC
- From: "Peter T. Breuer" <ptb@xxxxxxxxxxxxxx>
Re: Is mdadm --create safe for existing arrays ?
- From: Mike Hardy <mhardy@xxxxxxx>
Re: remark and RFC
- From: "Peter T. Breuer" <ptb@xxxxxxxxxxxxxx>
Is mdadm --create safe for existing arrays ?
- From: Peter Greis <peter_greis@xxxxxxxxx>
Re: remark and RFC
- From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
Re: Making bootable SATA RAID1 array in Mandriva 2006
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: remark and RFC
- From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
Re: Making bootable SATA RAID1 array in Mandriva 2006
- From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
Re: Making bootable SATA RAID1 array in Mandriva 2006
- From: andy liebman <andyliebman@xxxxxxx>
Re: remark and RFC
- From: "Peter T. Breuer" <ptb@xxxxxxxxxxxxxx>
Re: Can you IMAGE Mirrored OS Drives?
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Re: Can you IMAGE Mirrored OS Drives?
- From: andy liebman <andyliebman@xxxxxxx>
Re: remark and RFC
- From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
remark and RFC
- From: "Peter T. Breuer" <ptb@xxxxxxxxxxxxxx>
Re: Can you IMAGE Mirrored OS Drives?
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: Can you IMAGE Mirrored OS Drives?
- From: Gordon Henderson <gordon@xxxxxxxxxx>
RE: Can you IMAGE Mirrored OS Drives?
- From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
Can you IMAGE Mirrored OS Drives?
- From: andy liebman <andyliebman@xxxxxxx>
Re: Kernel panic during resync
- From: Paul Waldo <pwaldo@xxxxxxxxxxxxx>
Re: Making bootable SATA RAID1 array in Mandriva 2006
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: Making bootable SATA RAID1 array in Mandriva 2006
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: Kernel panic during resync
- From: Neil Brown <neilb@xxxxxxx>
RE: RAID-10 and 4 HDDs - how many HDDs can break without loosing data?
- From: "Andrew Rechenberg Lists" <flux-ml@xxxxxxxxxxxxx>
Re: Getting 'sync' to flush disk cache?
- From: Jeff Garzik <jeff@xxxxxxxxxx>
Re: Getting 'sync' to flush disk cache?
- From: Jens Axboe <axboe@xxxxxxx>
Re: Getting 'sync' to flush disk cache?
- From: Arjan van de Ven <arjan@xxxxxxxxxxxxx>
Getting 'sync' to flush disk cache?
- From: Jeff Garzik <jeff@xxxxxxxxxx>
Re: Making bootable SATA RAID1 array in Mandriva 2006
- From: Laurent Lesage <laurent@xxxxxxxxxxxxx>
Re: Making bootable SATA RAID1 array in Mandriva 2006
- From: andy liebman <andyliebman@xxxxxxx>
Re: Making bootable SATA RAID1 array in Mandriva 2006
- From: Laurent Lesage <laurent@xxxxxxxxxxxxx>
Re: Making bootable SATA RAID1 array in Mandriva 2006
- From: andy liebman <andyliebman@xxxxxxx>
Re: Making bootable SATA RAID1 array in Mandriva 2006
- From: Henrik Holst <henrik.holst@xxxxxxxxxx>
Re: Making bootable SATA RAID1 array in Mandriva 2006
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: [bug?] raid1 integrity checking is broken on 2.6.18-rc4
- From: Neil Brown <neilb@xxxxxxx>
Making bootable SATA RAID1 array in Mandriva 2006
- From: andy liebman <andyliebman@xxxxxxx>
Re: Resize on dirty array?
- From: dean gaudet <dean@xxxxxxxxxx>
Re: raid5 write performance
- From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
Re: Incative RAID5 (it should be active)
- From: Jacob Madsen <jacob@xxxxxxxx>
Incative RAID5 (it should be active)
- From: Jacob Madsen <jacob@xxxxxxxx>
Re: [bug?] raid1 integrity checking is broken on 2.6.18-rc4
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: [bug?] raid1 integrity checking is broken on 2.6.18-rc4
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Resize on dirty array?
- From: "Tuomas Leikola" <tuomas.leikola@xxxxxxxxx>
[bug?] raid1 integrity checking is broken on 2.6.18-rc4
- From: Chuck Ebbert <76306.1226@xxxxxxxxxxxxxx>
Re: Resize on dirty array?
- From: Brad Campbell <brad@xxxxxxxxxxx>
Re: Resize on dirty array?
- From: "David Rees" <drees76@xxxxxxxxx>
Re: Resize on dirty array?
- From: "David Rees" <drees76@xxxxxxxxx>
Re: Resize on dirty array?
- From: "John Stoffel" <john@xxxxxxxxxxx>
Re: way too high reconstruction speed - bug?
- From: Tomasz Chmielewski <mangoo@xxxxxxxx>
Re: way too high reconstruction speed - bug?
- From: Paul Clements <paul.clements@xxxxxxxxxxxx>
drive is a spare, but I want to make it active - how?
- From: Tomasz Chmielewski <mangoo@xxxxxxxx>
Re: RAID-10 and 4 HDDs - how many HDDs can break without loosing data?
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: drive is a spare, but I want to make it active - how?
- From: Tomasz Chmielewski <mangoo@xxxxxxxx>
Re: Resize on dirty array?
- From: dean gaudet <dean@xxxxxxxxxx>
way too high reconstruction speed - bug?
- From: Tomasz Chmielewski <mangoo@xxxxxxxx>
RAID-10 and 4 HDDs - how many HDDs can break without loosing data?
- From: Tomasz Chmielewski <mangoo@xxxxxxxx>
RAID-10 and 4 HDDs - how many HDDs can break without loosing data?
- From: Tomasz Chmielewski <mangoo@xxxxxxxx>
How does linux soft-raid resolve the inconsistency after a system crash?
- From: liyiming <liyiming@xxxxxxxxxxxx>
Re: modifying degraded raid 1 then re-adding other members is bad
- From: Neil Brown <neilb@xxxxxxx>
Re: Resize on dirty array?
- From: David Greaves <david@xxxxxxxxxxxx>
Re: Resize on dirty array?
- From: Henrik Holst <henrik.holst@xxxxxxxxxx>
Re: Resize on dirty array?
- From: James Peverill <jamespev@xxxxxxxxxxxx>
Re: Resize on dirty array?
- From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
Re: Resize on dirty array?
- From: "Martin Schröder" <martin@xxxxxxxxxx>
Re: Resize on dirty array?
- From: James Peverill <jamespev@xxxxxxxxxxxx>
Re: resize new raid problem
- From: Luca Berra <bluca@xxxxxxxxxx>
resize new raid problem
- From: Serge Torop <tsp@xxxxxxxxxxxx>
Re: modifying degraded raid 1 then re-adding other members is bad
- From: Helge Hafting <helge.hafting@xxxxxxxxxxxxx>
Re: modifying degraded raid 1 then re-adding other members is bad
- From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
Re: Resize on dirty array?
- From: Neil Brown <neilb@xxxxxxx>
Re: modifying degraded raid 1 then re-adding other members is bad
- From: Neil Brown <neilb@xxxxxxx>
Re: modifying degraded raid 1 then re-adding other members is bad
- From: Neil Brown <neilb@xxxxxxx>
Re: Resize on dirty array?
- From: James Peverill <jamespev@xxxxxxxxxxxx>
Re: modifying degraded raid 1 then re-adding other members is bad
- From: Krzysztof Halasa <khc@xxxxxxxxx>
Re: modifying degraded raid 1 then re-adding other members is bad
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: modifying degraded raid 1 then re-adding other members is bad
- From: Neil Brown <neilb@xxxxxxx>
modifying degraded raid 1 then re-adding other members is bad
- From: Alexandre Oliva <aoliva@xxxxxxxxxx>
Re: Resize on dirty array?
- From: Neil Brown <neilb@xxxxxxx>
Resize on dirty array?
- From: James Peverill <jamespev@xxxxxxxxxxxx>
Re: raid5/lvm setup questions
- From: Neil Brown <neilb@xxxxxxx>
Re: raid5/lvm setup questions
- From: David Greaves <david@xxxxxxxxxxxx>
Re: raid5/lvm setup questions
- From: David Greaves <david@xxxxxxxxxxxx>
slow resync during mdadm --create
- From: Mahendra <kuk_m@xxxxxxxxx>
Re: raid5/lvm setup questions
- From: Chet McNeill <chet@xxxxxxxxxxx>
Re: raid5/lvm setup questions
- From: Shane <shane@xxxxx>
Re: raid5/lvm setup questions
- From: Nix <nix@xxxxxxxxxxxxx>
Re: [patch] raid1: allow user to force reads from a specific disk
- From: Chuck Ebbert <76306.1226@xxxxxxxxxxxxxx>
ANNOUNCE: mdadm 2.5.3 - A tool for managing Soft RAID under Linux
- From: Neil Brown <neilb@xxxxxxx>
Re: [patch] raid1: allow user to force reads from a specific disk
- From: Neil Brown <neilb@xxxxxxx>
[patch] raid1: allow user to force reads from a specific disk
- From: Chuck Ebbert <76306.1226@xxxxxxxxxxxxxx>
issue with mdadm ver1 sb and bitmap on x86_64
- From: "Mike Snitzer" <snitzer@xxxxxxxxx>
Re: [PATCH 010 of 10] md: Allow the write_mostly flag to be set via sysfs.
- From: "Mike Snitzer" <snitzer@xxxxxxxxx>
Re: raid 5 read performance
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: raid5/lvm setup questions
- From: "Martin Schröder" <martin@xxxxxxxxxx>
Re: raid5/lvm setup questions
- From: Shane <shane@xxxxx>
Re: raid5/lvm setup questions
- From: David Greaves <david@xxxxxxxxxxxx>
Re: raid 5 read performance
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
raid5/lvm setup questions
- From: Shane <shane@xxxxx>
raid1 oops, 2.6.16
- From: Jason Lunz <lunz@xxxxxxxxxxxx>
Re: [PATCH 010 of 10] md: Allow the write_mostly flag to be set via sysfs.
- From: "Mike Snitzer" <snitzer@xxxxxxxxx>
Re: Raid5 bitmap - Bug in bitmap_startwrite()
- From: "Francois Barre" <francois.barre@xxxxxxxxx>
Re: Raid5 bitmap - Bug in bitmap_startwrite()
- From: Paul Clements <paul.clements@xxxxxxxxxxxx>
Raid5 bitmap - Bug in bitmap_startwrite()
- From: "Francois Barre" <francois.barre@xxxxxxxxx>
Re: [BUG] raid1: barrier retry does not work correctly with write-behind
- From: Paul Clements <paul.clements@xxxxxxxxxxxx>
Re: [BUG] raid1: barrier retry does not work correctly with write-behind
- From: Paul Clements <paul.clements@xxxxxxxxxxxx>
Re: [BUG] raid1: barrier retry does not work correctly with write-behind
- From: Neil Brown <neilb@xxxxxxx>
Re: Raid5 hardware failure
- From: Neil Brown <neilb@xxxxxxx>
[BUG] raid1: barrier retry does not work correctly with write-behind
- From: Paul Clements <paul.clements@xxxxxxxxxxxx>
Re: [PATCH] md: new bitmap sysfs interface
- From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
Re: Converting Ext3 to Ext3 under RAID 1
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: [PATCH] md: new bitmap sysfs interface
- From: David Greaves <david@xxxxxxxxxxxx>
Re: Mdadm problem?
- From: Neil Brown <neilb@xxxxxxx>
Re: [PATCH] md: new bitmap sysfs interface
- From: Paul Clements <paul.clements@xxxxxxxxxxxx>
Re: [PATCH] md: new bitmap sysfs interface
- From: Neil Brown <neilb@xxxxxxx>
Re: [PATCH 005 of 9] md: Replace magic numbers in sb_dirty with well defined bit flags
- From: Doug Ledford <dledford@xxxxxxxxxx>
Re: Converting Ext3 to Ext3 under RAID 1
- From: Robert Heinzmann <Robert.Heinzmann@xxxxxxx>
Re: Converting Ext3 to Ext3 under RAID 1
- From: Paul Clements <paul.clements@xxxxxxxxxxxx>
Re: Converting Ext3 to Ext3 under RAID 1
- From: dean gaudet <dean@xxxxxxxxxx>
Converting Ext3 to Ext3 under RAID 1
- From: Dan Graham <graham@xxxxxxxxxxxxxxxxxx>
Re: let md auto-detect 128+ raid members, fix potential race condition
- From: Bill Davidsen <davidsen@xxxxxxx>
Mdadm problem?
- From: "A.J.Dawson" <A.J.Dawson@xxxxxxxxxxxxxx>
Re: let md auto-detect 128+ raid members, fix potential race condition
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: let md auto-detect 128+ raid members, fix potential race condition
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: let md auto-detect 128+ raid members, fix potential race condition
- From: Alexandre Oliva <aoliva@xxxxxxxxxx>
Re: let md auto-detect 128+ raid members, fix potential race condition
- From: Alexandre Oliva <aoliva@xxxxxxxxxx>
Re: let md auto-detect 128+ raid members, fix potential race condition
- From: Alexandre Oliva <aoliva@xxxxxxxxxx>
Re: [PATCH 004 of 9] md: Factor out part of raid10d into a separate function.
- From: Neil Brown <neilb@xxxxxxx>
Re: let md auto-detect 128+ raid members, fix potential race condition
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: [PATCH 004 of 9] md: Factor out part of raid10d into a separate function.
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: [PATCH 005 of 9] md: Replace magic numbers in sb_dirty with well defined bit flags
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: let md auto-detect 128+ raid members, fix potential race condition
- From: Michael Tokarev <mjt@xxxxxxxxxx>
[PATCH] md: Fix a bug that recently crept into md/linear
- From: NeilBrown <neilb@xxxxxxx>
Re: let md auto-detect 128+ raid members, fix potential race condition
- From: Alexandre Oliva <aoliva@xxxxxxxxxx>
Re: let md auto-detect 128+ raid members, fix potential race condition
- From: Alexandre Oliva <aoliva@xxxxxxxxxx>
Re: let md auto-detect 128+ raid members, fix potential race condition
- From: Alexandre Oliva <aoliva@xxxxxxxxxx>
Re: let md auto-detect 128+ raid members, fix potential race condition
- From: Neil Brown <neilb@xxxxxxx>
Re: let md auto-detect 128+ raid members, fix potential race condition
- From: David Greaves <david@xxxxxxxxxxxx>
Re: let md auto-detect 128+ raid members, fix potential race condition
- From: Alexandre Oliva <aoliva@xxxxxxxxxx>
Re: let md auto-detect 128+ raid members, fix potential race condition
- From: Helge Hafting <helgehaf@xxxxxxxxxxxxx>
Re: [PATCH 005 of 9] md: Replace magic numbers in sb_dirty with well defined bit flags
- From: Ingo Oeser <ioe-lkml@xxxxxxxxxx>
Re: [PATCH 0/2] Fix RAID5 + IA64 compile
- From: Jes Sorensen <jes@xxxxxxx>
Re: [PATCH 0/2] Fix RAID5 + IA64 compile
- From: Prarit Bhargava <prarit@xxxxxxxxxx>
Re: [PATCH 006 of 9] md: Remove the working_disks and failed_disks from raid5 state data.
- From: Michael Tokarev <mjt@xxxxxxxxxx>
[PATCH 003 of 9] md: Factor out part of raid1d into a separate function.
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 004 of 9] md: Factor out part of raid10d into a separate function.
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 006 of 9] md: Remove the working_disks and failed_disks from raid5 state data.
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 007 of 9] md: Remove 'working_disks' from raid10 state
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 009 of 9] md: Improve locking around error handling.
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 008 of 9] md: Remove working_disks from raid1 state data
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 005 of 9] md: Replace magic numbers in sb_dirty with well defined bit flags
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 002 of 9] md: Fix a comment that is wrong in raid5.h
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 001 of 9] md: The scheduled removal of the START_ARRAY ioctl for md
- From: NeilBrown <neilb@xxxxxxx>
[PATCH 000 of 9] md: Introduction - assorted cleanup and minor fixes
- From: NeilBrown <neilb@xxxxxxx>
Re: let md auto-detect 128+ raid members, fix potential race condition
- From: Neil Brown <neilb@xxxxxxx>
[RFC: 2.6 patch] the scheduled removal of the START_ARRAY ioctl for md
- From: Adrian Bunk <bunk@xxxxxxxxx>
[PATCH 2/2] Fix IA64 components
- From: Prarit Bhargava <prarit@xxxxxxx>
[PATCH 1/2] Fix RAID5 components
- From: Prarit Bhargava <prarit@xxxxxxx>
[PATCH 0/2] Fix RAID5 + IA64 compile
- From: Prarit Bhargava <prarit@xxxxxxx>
Re: Weird blocks at fsync() calls using md
- From: Sander Smeenk <ssmeenk@xxxxxxxxxxxx>
Linux software raid: Status and plan ?
- From: Robert Haas <rha@xxxxxxxxxxxxxx>
Re: Weird blocks at fsync() calls using md
- From: Neil Brown <neilb@xxxxxxx>
Re: Weird blocks at fsync() calls using md
- From: Sander Smeenk <ssmeenk@xxxxxxxxxxxx>
Re: Weird blocks at fsync() calls using md
- From: Neil Brown <neilb@xxxxxxx>
Weird blocks at fsync() calls using md
- From: Sander Smeenk <ssmeenk@xxxxxxxxxxxx>
Re: [PATCH 001 of 006] raid5: Move write operations to a work queue
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: [PATCH] md: new bitmap sysfs interface
- From: Paul Clements <paul.clements@xxxxxxxxxxxx>
Re: [PATCH 001 of 006] raid5: Move write operations to a work queue
- From: Yuri Tikhonov <yur_t@xxxxxxx>
Re: [PATCH] md: new bitmap sysfs interface
- From: "Mike Snitzer" <snitzer@xxxxxxxxx>
Re: [PATCH] md: new bitmap sysfs interface
- From: Paul Clements <paul.clements@xxxxxxxxxxxx>
Re: Grub vs Lilo
- From: Simen Thoresen <simentt@xxxxxxxxxxxxx>
Grub vs Lilo
- From: Lewis Shobbrook <mylists@xxxxxxxxxxxxxxx>
Re: ICH7R "strip" size
- From: Mark Hahn <hahn@xxxxxxxxxxxxxxxxxxx>
Re: [PATCH] md: new bitmap sysfs interface
- From: "Mike Snitzer" <snitzer@xxxxxxxxx>
Re: [PATCH] md: new bitmap sysfs interface
- From: Paul Clements <paul.clements@xxxxxxxxxxxx>
ICH7R "strip" size
- From: Jeff Woods <Kazrak+kernel@xxxxxxxxxxx>
Re: [PATCH] md: new bitmap sysfs interface
- From: "Mike Snitzer" <snitzer@xxxxxxxxx>
Re: host based mirror distance in a fc-based SAN environment
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: Grub vs Lilo
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: Grub vs Lilo
- From: Bernd Rieke <bernd@xxxxxx>
Re: Grub vs Lilo
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: Grub vs Lilo
- From: Jason Lunz <lunz@xxxxxxxxxxxx>
Re: host based mirror distance in a fc-based SAN environment
- From: David Greaves <david@xxxxxxxxxxxx>
Re: Grub vs Lilo
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Grub vs Lilo
- From: Lewis Shobbrook <mylists@xxxxxxxxxxxxxxx>
host based mirror distance in a fc-based SAN environment
- From: "Stefan Majer" <stefan@xxxxxxxxxxxxx>
FIXED : brute-force my RAID 5 - just some fsck errors..
- From: Sevrin Robstad <quack@xxxxxxxxx>
write back cache and barrier questions
- From: marco <thedrop@xxxxxxxxxxx>
Re: [PATCH] md: new bitmap sysfs interface
- From: dave rientjes <rientjes@xxxxxxxxxx>
Re: In Trouble--Please Help! (was Re: Can't add disk to failed raid array)
- From: Paul Waldo <pwaldo@xxxxxxxxxxxxx>
Re: Drives of same model in RAID 1/10 ?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
[PATCH] md: new bitmap sysfs interface
- From: Paul Clements <paul.clements@xxxxxxxxxxxx>
Re: In Trouble--Please Help! (was Re: Can't add disk to failed raid array)
- From: Neil Brown <neilb@xxxxxxx>
Re: Drives of same model in RAID 1/10 ?
- From: hahn@xxxxxxxxxxxxxxxxxxx
Re: Drives of same model in RAID 1/10 ?
- From: "Jeff Breidenbach" <breidenbach@xxxxxxxxx>
Re: Drives of same model in RAID 1/10 ?
- From: Andy Smith <andy@xxxxxxxxxx>
Re: Dell PowerEdge Expandable RAID Controller 4e/Di
- From: "Pieter Steyn" <pieterste@xxxxxxxxx>
Re: In Trouble--Please Help! (was Re: Can't add disk to failed raid array)
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Drives of same model in RAID 1/10 ?
- From: Mark Hellman <markhellman@xxxxxxxxxx>
Re: In Trouble--Please Help! (was Re: Can't add disk to failed raid array)
- From: Paul Waldo <pwaldo@xxxxxxxxxxxxx>
Re: In Trouble--Please Help! (was Re: Can't add disk to failed raid array)
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: I travelled twice in the past !!
- From: hahn@xxxxxxxxxxxxxxxxxxx
Dell PowerEdge Expandable RAID Controller 4e/Di
- From: "Pieter Steyn" <pieterste@xxxxxxxxx>
I travelled twice in the past !!
- From: Edouard Gaulué <edouard.gaulue@xxxxxxxxxxx>
Re: In Trouble--Please Help! (was Re: Can't add disk to failed raid array)
- From: Paul Waldo <pwaldo@xxxxxxxxxxxxx>
Re: trying to "brute-force" my RAID 5...
- From: "Tuomas Leikola" <tuomas.leikola@xxxxxxxxx>
Re: In Trouble--Please Help! (was Re: Can't add disk to failed raid array)
- From: Neil Brown <neilb@xxxxxxx>
Re: In Trouble--Please Help! (was Re: Can't add disk to failed raid array)
- From: Paul Waldo <pwaldo@xxxxxxxxxxxxx>
Re: In Trouble--Please Help! (was Re: Can't add disk to failed raid array)
- From: Paul Waldo <pwaldo@xxxxxxxxxxxxx>
Re: In Trouble--Please Help! (was Re: Can't add disk to failed raid array)
- From: Neil Brown <neilb@xxxxxxx>
In Trouble--Please Help! (was Re: Can't add disk to failed raid array)
- From: Paul Waldo <pwaldo@xxxxxxxxxxxxx>
raid from2.6 kernel not recognized under 2.4
- From: "Daniel J. Priem" <daniel@xxxxxxxxxxx>
Re: md reports: unknown partition table - fixed.
- From: Nix <nix@xxxxxxxxxxxxx>
Better Success, world-sobered
- From: "Kimberley Mcclure" <KimberleyMcclure@xxxxxxxx>
Re: Raid5 Reshape Status + xfs_growfs = Success! (2.6.17.3)
- From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
[RTLWS8-CFP] Eighth Real-Time Linux Workshop 2nd CFP
- From: mcguire@xxxxxxxxxx
Re: which disk the the one that data is on?
- From: Shai <shaibn@xxxxxxxxx>
Serious XFS bug in 2.6.17 kernels - FYI
- From: David Greaves <david@xxxxxxxxxxxx>
Re: Megaraid, howto?
- From: "Pieter Steyn" <pieterste@xxxxxxxxx>
Re: Is it possible to recover data after resync?
- From: Alex Davis <alex14641@xxxxxxxxx>
Re: Megaraid, howto?
- From: Joshua Baker-LePain <jlb17@xxxxxxxx>
Slightly OT - Dell PERC 5 card...
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Megaraid, howto?
- From: "Pieter Steyn" <pieterste@xxxxxxxxx>
Re: Is it possible to recover data after resync?
- From: Alex Davis <alex14641@xxxxxxxxx>
Re: Is it possible to recover data after resync?
- From: Alex Davis <alex14641@xxxxxxxxx>
Re: Is it possible to recover data after resync?
- From: Neil Brown <neilb@xxxxxxx>
Re: Is it possible to recover data after resync?
- From: Alex Davis <alex14641@xxxxxxxxx>
Re: Is it possible to recover data after resync?
- From: Neil Brown <neilb@xxxxxxx>
Re: md reports: unknown partition table - fixed.
- From: Neil Brown <neilb@xxxxxxx>
Re: which disk the the one that data is on?
- From: Neil Brown <neilb@xxxxxxx>
Re: raid5.h documentation
- From: Neil Brown <neilb@xxxxxxx>
Re: XFS and write barrier
- From: Neil Brown <neilb@xxxxxxx>
Is it possible to recover data after resync?
- From: Alex Davis <alex14641@xxxxxxxxx>
Re: which disk the the one that data is on?
- From: Janos Farkas <chexum+dev@xxxxxxxxx>
raid5.h documentation
- From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
Re: which disk the the one that data is on?
- From: Shai <shaibn@xxxxxxxxx>
Re: only 4 spares and no access to my data
- From: Nix <nix@xxxxxxxxxxxxx>
Re: issue with internal bitmaps
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: trying to "brute-force" my RAID 5...
- From: Sevrin Robstad <quack@xxxxxxxxx>
Re: md reports: unknown partition table - fixed.
- From: David Greaves <david@xxxxxxxxxxxx>
Re: XFS and write barrier
- From: David Chinner <dgc@xxxxxxx>
Re: mdadm -X bitmap status off by 2^16
- From: Janos Farkas <chexum+dev@xxxxxxxxx>
md reports: unknown partition table
- From: David Greaves <david@xxxxxxxxxxxx>
Re: mdadm -X bitmap status off by 2^16
- From: Paul Clements <paul.clements@xxxxxxxxxxxx>
Re: trying to "brute-force" my RAID 5...
- From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
Re: Raid and LVM and LILO
- From: Paul Waldo <pwaldo@xxxxxxxxxxxxx>
Re: issue with internal bitmaps
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: which disk the the one that data is on?
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Raid and LVM and LILO
- From: Du <eduardo@xxxxxxxxxxxxxx>
Re: Raid and LVM and LILO
- From: Paul Waldo <pwaldo@xxxxxxxxxxxxx>
Re: [PATCH] enable auto=yes by default when using udev
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: which disk the the one that data is on?
- From: Neil Brown <neilb@xxxxxxx>
read-ahead cache on indiv. raid members and entire md device
- From: Roy Waldspurger <rlists@xxxxxxxxxxxxxxxxx>
Re: which disk the the one that data is on?
- From: Shai <shaibn@xxxxxxxxx>
Re: Still can't get md arrays that were started from an initrd to shutdown
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Still can't get md arrays that were started from an initrd to shutdown
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: which disk the the one that data is on?
- From: Neil Brown <neilb@xxxxxxx>
Re: XFS and write barrier
- From: Neil Brown <neilb@xxxxxxx>
Re: trying to "brute-force" my RAID 5...
- From: "Francois Barre" <francois.barre@xxxxxxxxx>
Re: trying to "brute-force" my RAID 5...
- From: Brad Campbell <brad@xxxxxxxxxxx>
Re: trying to "brute-force" my RAID 5...
- From: "Francois Barre" <francois.barre@xxxxxxxxx>
which disk the the one that data is on?
- From: Shai <shaibn@xxxxxxxxx>
Re: XFS and write barrier
- From: Nathan Scott <nathans@xxxxxxx>
mdadm -X bitmap status off by 2^16
- From: Janos Farkas <chexum+dev@xxxxxxxxx>
Re: Problem with --manage
- From: Neil Brown <neilb@xxxxxxx>
Re: Problem with --manage
- From: Benjamin Schieder <blindcoder@xxxxxxxxxxxxxxxxxxxx>
Re: Where is MD Device Layer
- From: linuxmania.lizhi@xxxxxxxxx
Re: Problem with --manage
- From: Neil Brown <neilb@xxxxxxx>
Re: Can't add disk to failed raid array
- From: Neil Brown <neilb@xxxxxxx>
Re: [PATCH] enable auto=yes by default when using udev
- From: Neil Brown <neilb@xxxxxxx>
Re: Still can't get md arrays that were started from an initrd to shutdown
- From: dean gaudet <dean@xxxxxxxxxx>
Re: Where is MD Device Layer
- From: Neil Brown <neilb@xxxxxxx>
Re: Booting issue - rebooting also
- From: Neil Brown <neilb@xxxxxxx>
Re: PLEASE HELP ... raid5 array degraded ...
- From: Neil Brown <neilb@xxxxxxx>
Re: only 4 spares and no access to my data
- From: Neil Brown <neilb@xxxxxxx>
Re: trying to "brute-force" my RAID 5...
- From: Neil Brown <neilb@xxxxxxx>
Re: Test feedback 2.6.17.4+libata-tj-stable (EH, hotplug)
- From: Neil Brown <neilb@xxxxxxx>
Re: Problem with 3xRAID1 to RAID 0
- From: Neil Brown <neilb@xxxxxxx>
Re: SWRaid Wiki
- From: Neil Brown <neilb@xxxxxxx>
Re: Raid5 Reshape Status + xfs_growfs = Success! (2.6.17.3)
- From: Neil Brown <neilb@xxxxxxx>
Re: Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)
- From: Neil Brown <neilb@xxxxxxx>
Re: Mounting array was read write for about 3 minutes, then Read-only file system error
- From: "David Rientjes" <rientjes@xxxxxxxxxx>
Re: zeroing old superblocks & upgrading...
- From: Neil Brown <neilb@xxxxxxx>
Re: Mounting array was read write for about 3 minutes, then Read-only file system error
- From: Neil Brown <neilb@xxxxxxx>
Raid and LVM and LILO
- From: Du <eduardo@xxxxxxxxxxxxxx>
Re: Still can't get md arrays that were started from an initrd to shutdown
- From: Nix <nix@xxxxxxxxxxxxx>
Re: second controller: what will my discs be called, and does it matter?
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Re: trying to "brute-force" my RAID 5...
- From: Sevrin Robstad <quack@xxxxxxxxx>
Still can't get md arrays that were started from an initrd to shutdown
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
troubleshooting PNY S-cure
- From: "whc86 (sent by Nabble.com)" <lists@xxxxxxxxxx>
Re: [PATCH] enable auto=yes by default when using udev
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: issue with internal bitmaps
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Can't add disk to failed raid array
- From: Paul Waldo <pwaldo@xxxxxxxxxxxxx>
Re: second controller: what will my discs be called, and does it matter?
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Array will not assemble
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Test feedback 2.6.17.4+libata-tj-stable (EH, hotplug)
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Hardware assisted parity computation - is it now worth it?
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Random Seek on Array as slow as on single disk
- From: Bill Davidsen <davidsen@xxxxxxx>
Problem with --manage
- From: Benjamin Schieder <blindcoder@xxxxxxxxxxxxxxxxxxxx>
Re: trying to "brute-force" my RAID 5...
- From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
Tuning the I/O scheduler for md?
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Random Seek on Array as slow as on single disk
- From: Mattias Wadenstein <maswan@xxxxxxxxxx>
trying to "brute-force" my RAID 5...
- From: Sevrin Robstad <quackyo@xxxxxxxx>
Re: Random Seek on Array as slow as on single disk
- From: "Jeff Breidenbach" <breidenbach@xxxxxxxxx>
Re: Random Seek on Array as slow as on single disk
- From: "A. Liemen" <maillist@xxxxxxxxxx>
Re: Random Seek on Array as slow as on single disk
- From: Jeff Breidenbach <jeff@xxxxxxx>
Random Seek on Array as slow as on single disk
- From: "A. Liemen" <maillist@xxxxxxxxxx>
Re: Can't add disk to failed raid array
- From: Paul Waldo <pwaldo@xxxxxxxxxxxxx>
Re: Can't add disk to failed raid array
- From: Paul Waldo <pwaldo@xxxxxxxxxxxxx>
Re: Can't add disk to failed raid array
- From: Neil Brown <neilb@xxxxxxx>
Can't add disk to failed raid array
- From: Paul Waldo <pwaldo@xxxxxxxxxxxxx>
Re: PLEASE HELP ... raid5 array degraded - how fix it?
- From: "Andrew Skolarz" <pletopia@xxxxxxxxx>
Re: PLEASE HELP ... raid5 array degraded - how fix it?
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Re: only 4 spares and no access to my data - solved
- From: Karl Voit <news@xxxxxxxxxxxx>
Re: Hardware assisted parity computation - is it now worth it?
- From: Burn Alting <burn@xxxxxxxxxxxxxx>
Booting issue - rebooting also
- From: Vladimir Strycek <vladoportos@xxxxxxxxxxxxxx>
Re: Hardware assisted parity computation - is it now worth it?
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: only 4 spares and no access to my data
- From: Karl Voit <news@xxxxxxxxxxxx>
Re: Hardware assisted parity computation - is it now worth it?
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Where is MD Device Layer
- From: linuxmania.lizhi@xxxxxxxxx
Hardware assisted parity computation - is it now worth it?
- From: Burn Alting <burn@xxxxxxxxxxxxxx>
Re: only 4 spares and no access to my data
- From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
Re: Problem with 3xRAID1 to RAID 0
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Problem with 3xRAID1 to RAID 0
- From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
Re: Problem with 3xRAID1 to RAID 0
- From: Jim Klimov <klimov@xxxxxxxxxxx>
Re: PLEASE HELP ... raid5 array degraded ...
- From: "Andrew Skolarz" <pletopia@xxxxxxxxx>
Re: PLEASE HELP ... raid5 array degraded ...
- From: "Andrew Skolarz" <pletopia@xxxxxxxxx>
PLEASE HELP ... raid5 array degraded ...
- From: "Andrew Skolarz" <pletopia@xxxxxxxxx>
Re: SWRaid Wiki
- From: David Greaves <david@xxxxxxxxxxxx>
Raid5 Reshape Status + xfs_growfs = Success! (2.6.17.3)
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
SWRaid Wiki
- From: "Francois Barre" <francois.barre@xxxxxxxxx>
Re: ICH7 sata-ahci + software raid warning
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: ICH7 sata-ahci + software raid warning
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: ICH7 sata-ahci + software raid warning
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: ICH7 sata-ahci + software raid warning
- From: "Francois Barre" <francois.barre@xxxxxxxxx>
Re: ICH7 sata-ahci + software raid warning
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)
- From: Petr Vyskocil <petr@xxxxxxxx>
Re: Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)
- From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
Problem with 3xRAID1 to RAID 0
- From: Vladimir Strycek <vladoportos@xxxxxxxxxxxxxx>
Re: Test feedback 2.6.17.4+libata-tj-stable (EH, hotplug)
- From: Tejun Heo <htejun@xxxxxxxxx>
Re: Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)
- From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
Re: Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Test feedback 2.6.17.4+libata-tj-stable (EH, hotplug)
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: only 4 spares and no access to my data
- From: Karl Voit <news@xxxxxxxxxxxx>
Re: only 4 spares and no access to my data
- From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
ICH7 sata-ahci + software raid warning
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Can't get md array to shut down cleanly
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: only 4 spares and no access to my data
- From: Karl Voit <news@xxxxxxxxxxxx>
Re: only 4 spares and no access to my data
- From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
Re: only 4 spares and no access to my data
- From: Karl Voit <news@xxxxxxxxxxxx>
Re: only 4 spares and no access to my data
- From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
Re: only 4 spares and no access to my data
- From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
Re: only 4 spares and no access to my data
- From: Karl Voit <news@xxxxxxxxxxxx>
Re: only 4 spares and no access to my data
- From: Karl Voit <news@xxxxxxxxxxxx>
Re: only 4 spares and no access to my data
- From: Karl Voit <neww@xxxxxxxxxxxx>
Re: only 4 spares and no access to my data
- From: Henrik Holst <henrik.holst@xxxxxxxxxx>
Re: only 4 spares and no access to my data
- From: Karl Voit <neww@xxxxxxxxxxxx>
Re: only 4 spares and no access to my data
- From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
only 4 spares and no access to my data
- From: Karl Voit <news@xxxxxxxxxxxx>
PLease help me reconstruct my array (RAID 5 ) if possible.
- From: Sevrin Robstad <quackyo@xxxxxxxx>
Re: Resizing RAID-1 arrays - some possible bugs and problems
- From: Reuben Farrelly <reuben-lkml@xxxxxxxx>
Re: Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)
- From: Neil Brown <neilb@xxxxxxx>
Re: Setting up mdadm.conf for UUID?
- From: Neil Brown <neilb@xxxxxxx>
Re: Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)
- From: Neil Brown <neilb@xxxxxxx>
Re: Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Resizing RAID-1 arrays - some possible bugs and problems
- From: Neil Brown <neilb@xxxxxxx>
Re: Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)
- From: Neil Brown <neilb@xxxxxxx>
Re: Resizing RAID-1 arrays - some possible bugs and problems
- From: Reuben Farrelly <reuben-lkml@xxxxxxxx>
Re: Can't get md array to shut down cleanly
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Resizing RAID-1 arrays - some possible bugs and problems
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Strange intermittant errors + RAID doesn't fail the disk.
- From: Doug Ledford <dledford@xxxxxxxxxx>
Re: Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Resizing RAID-1 arrays - some possible bugs and problems
- From: Reuben Farrelly <reuben-lkml@xxxxxxxx>
Re: second controller: what will my discs be called, and does it matter?
- From: Gabor Gombas <gombasg@xxxxxxxxx>
Re: zeroing old superblocks & upgrading...
- From: "John Stoffel" <john@xxxxxxxxxxx>
Re: Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Setting up mdadm.conf for UUID?
- From: "Ewan Grantham" <ewan.grantham@xxxxxxxxx>
Kernel 2.6.17 and RAID5 Grow Problem (critical section backup)
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Can't get md array to shut down cleanly
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Strange intermittant errors + RAID doesn't fail the disk.
- From: Mattias Wadenstein <maswan@xxxxxxxxxx>
Re: issue with internal bitmaps
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: Can't get md array to shut down cleanly
- From: Neil Brown <neilb@xxxxxxx>
Mounting array was read write for about 3 minutes, then Read-only file system error
- From: "Brian Bonner" <bkbonner@xxxxxxxxx>
Re: Array will not assemble
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: Can't get md array to shut down cleanly
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Array will not assemble
- From: Neil Brown <neilb@xxxxxxx>
Array will not assemble
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: zeroing old superblocks & upgrading...
- From: Neil Brown <neilb@xxxxxxx>
Re: Strange intermittant errors + RAID doesn't fail the disk.
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
zeroing old superblocks & upgrading...
- From: "John Stoffel" <john@xxxxxxxxxxx>
Re: second controller: what will my discs be called, and does it matter?
- From: Neil Brown <neilb@xxxxxxx>
Re: issue with internal bitmaps
- From: Neil Brown <neilb@xxxxxxx>
Re: Can't get md array to shut down cleanly
- From: Neil Brown <neilb@xxxxxxx>
Re: Strange intermittant errors + RAID doesn't fail the disk.
- From: Neil Brown <neilb@xxxxxxx>
Re: second controller: what will my discs be called, and does it matter?
- From: "John Stoffel" <john@xxxxxxxxxxx>
Re: Can't get md array to shut down cleanly
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Can't get md array to shut down cleanly
- From: thunder7@xxxxxxxxx
second controller: what will my discs be called, and does it matter?
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
Re: Can't get md array to shut down cleanly
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Can't get md array to shut down cleanly
- From: Niccolo Rigacci <niccolo@xxxxxxxxxxx>
issue with internal bitmaps
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: RAID 5 crash, is there any way to recover some data ?
- From: Sevrin Robstad <quackyo@xxxxxxxx>
Can't get md array to shut down cleanly
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Strange intermittant errors + RAID doesn't fail the disk.
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Cutting power without breaking RAID
- From: "Molle Bestefich" <molle.bestefich@xxxxxxxxx>
Re: Linux SATA Support Question - Is the ULI M1575 chip supported?
- From: "Adam Henley" <adamazing@xxxxxxxxx>
Re: [PATCH] enable auto=yes by default when using udev
- From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
Re: [PATCH] enable auto=yes by default when using udev
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: [PATCH] enable auto=yes by default when using udev
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: [PATCH] enable auto=yes by default when using udev
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: Linux SATA Support Question - Is the ULI M1575 chip supported?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Linux SATA Support Question - Is the ULI M1575 chip supported?
- From: Jeff Garzik <jeff@xxxxxxxxxx>
Re: How does md determine which partitions to use in RAID1 when DEVICE partitions is specified
- From: Neil Brown <neilb@xxxxxxx>
Re: [PATCH] enable auto=yes by default when using udev
- From: Luca Berra <bluca@xxxxxxxxxx>
Linux SATA Support Question - Is the ULI M1575 chip supported?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: RAID 5 crash, is there any way to recover some data ?
- From: Sevrin Robstad <quack@xxxxxxxxx>
How does md determine which partitions to use in RAID1 when DEVICE partitions is specified
- From: "Brian Bonner" <bkbonner@xxxxxxxxx>
Re: RAID 5 crash, is there any way to recover some data ?
- From: Mike Hardy <mhardy@xxxxxxx>
RAID 5 crash, is there any way to recover some data ?
- From: Sevrin Robstad <quack@xxxxxxxxx>
Re: raid issues after power failure
- From: Ákos Maróy <darkeye@xxxxxxxxx>
Re: [PATCH] enable auto=yes by default when using udev
- From: Frank Blendinger <fb@xxxxxxxxxxxxxxxxxxx>
Re: [PATCH] enable auto=yes by default when using udev
- From: David Greaves <david@xxxxxxxxxxxx>
Re: raid issues after power failure
- From: "Francois Barre" <francois.barre@xxxxxxxxx>
Re: [PATCH] enable auto=yes by default when using udev
- From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
Re: raid issues after power failure
- From: Ákos Maróy <darkeye@xxxxxxxxx>
Re: [PATCH] enable auto=yes by default when using udev
- From: Jason Lunz <lunz@xxxxxxxxxxxx>
Re: [PATCH] enable auto=yes by default when using udev
- From: Neil Brown <neilb@xxxxxxx>
[PATCH] enable auto=yes by default when using udev
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: raid5 write performance
- From: Neil Brown <neilb@xxxxxxx>
raid5 write performance
- From: "Raz Ben-Jehuda(caro)" <raziebe@xxxxxxxxx>
Re: raid issues after power failure
- From: David Greaves <david@xxxxxxxxxxxx>
Re: raid issues after power failure
- From: "Francois Barre" <francois.barre@xxxxxxxxx>
Re: changing MD device names
- From: Neil Brown <neilb@xxxxxxx>
Re: degraded raid5 refuses to start
- From: Jason Lunz <lunz@xxxxxxxxxxxx>
changing MD device names
- From: Jon Lewis <jlewis@xxxxxxxxx>
degraded raid5 refuses to start
- From: Jason Lunz <lunz@xxxxxxxxxxxx>
Re: raid issues after power failure
- From: Ákos Maróy <darkeye@xxxxxxxxx>
Re: Strange intermittant errors + RAID doesn't fail the disk.
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Strange intermittant errors + RAID doesn't fail the disk.
- From: Neil Brown <neilb@xxxxxxx>
Re: raid issues after power failure
- From: Neil Brown <neilb@xxxxxxx>
Strange intermittant errors + RAID doesn't fail the disk.
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: raid issues after power failure
- From: "Francois Barre" <francois.barre@xxxxxxxxx>
Re: raid issues after power failure
- From: Akos Maroy <darkeye@xxxxxxxxx>
Re: raid issues after power failure
- From: "Francois Barre" <francois.barre@xxxxxxxxx>
Re: raid issues after power failure
- From: Akos Maroy <darkeye@xxxxxxxxx>
Re: raid issues after power failure
- From: "Francois Barre" <francois.barre@xxxxxxxxx>
Re: raid issues after power failure
- From: "Francois Barre" <francois.barre@xxxxxxxxx>
Re: raid issues after power failure
- From: Ákos Maróy <darkeye@xxxxxxxxx>
Re: raid issues after power failure
- From: "Francois Barre" <francois.barre@xxxxxxxxx>
raid issues after power failure
- From: Ákos Maróy <darkeye@xxxxxxxxx>
Re: Cutting power without breaking RAID
- From: Neil Brown <neilb@xxxxxxx>
Re: Cutting power without breaking RAID
- From: "alexwang.com (sent by Nabble.com)" <lists@xxxxxxxxxx>
Re: [PATCH 005 of 006] raid5: Move expansion operations to a work queue
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: [PATCH 004 of 006] raid5: Move read completion copies to a work queue
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: [PATCH 000 of 006] raid5: Offload RAID operations to a workqueue
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: Cutting power without breaking RAID
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: I need a PCI V2.1 4 port SATA card
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: RAID resync after every boot?
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Cutting power without breaking RAID
- From: Niccolo Rigacci <niccolo@xxxxxxxxxxx>
Re: Cutting power without breaking RAID
- From: Niccolo Rigacci <niccolo@xxxxxxxxxxx>
RAID resync after every boot?
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: [PATCH 000 of 006] raid5: Offload RAID operations to a workqueue
- From: Arjan van de Ven <arjan@xxxxxxxxxxxxx>
Re: mdadm 2.5.2 - Static built , Interesting warnings when
- From: Neil Brown <neilb@xxxxxxx>
Re: Cutting power without breaking RAID
- From: Neil Brown <neilb@xxxxxxx>
Re: Drive issues in RAID vs. not-RAID ..
- From: Neil Brown <neilb@xxxxxxx>
Re: Cutting power without breaking RAID
- From: Tim <irule@xxxxxxxxx>
Cutting power without breaking RAID
- From: Niccolo Rigacci <niccolo@xxxxxxxxxxx>
Re: I need a PCI V2.1 4 port SATA card
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
[PATCH 003 of 006] raid5: Move compute block operations to a work queue
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
[PATCH 000 of 006] raid5: Offload RAID operations to a workqueue
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
[PATCH 006 of 006] raid5: Remove compute_block and compute_parity
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
[PATCH 001 of 006] raid5: Move write operations to a work queue
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
[PATCH 004 of 006] raid5: Move read completion copies to a work queue
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
[PATCH 005 of 006] raid5: Move expansion operations to a work queue
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
[PATCH 002 of 006] raid5: Move check parity operations to a work queue
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: Ok to go ahead with this setup?
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
Re: I need a PCI V2.1 4 port SATA card
- From: Petr Vyskocil <petr@xxxxxxxx>
Re: Ok to go ahead with this setup?
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: I need a PCI V2.1 4 port SATA card
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Re: I need a PCI V2.1 4 port SATA card
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: I need a PCI V2.1 4 port SATA card
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Ok to go ahead with this setup?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Drive issues in RAID vs. not-RAID ..
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Re: Ok to go ahead with this setup?
- From: "bart@xxxxxxxxxxxxx" <bart@xxxxxxxxxxxxx>
Re: Ok to go ahead with this setup?
- From: "Christian Pernegger" <pernegger@xxxxxxxxx>
Re: Ok to go ahead with this setup?
- From: Brad Campbell <brad@xxxxxxxxxxx>
Re: Ok to go ahead with this setup?
- From: "bart@xxxxxxxxxxxxx" <bart@xxxxxxxxxxxxx>
Re: I need a PCI V2.1 4 port SATA card
- From: Brad Campbell <brad@xxxxxxxxxxx>
I need a PCI V2.1 4 port SATA card
- From: "Guy" <bugzilla@xxxxxxxxxxxxxxxx>
Re: Ok to go ahead with this setup?
- From: Mike Dresser <mdresser_l@xxxxxxxxxxxxxxxxxx>
Re: mdadm 2.5.2 - Static built , Interesting warnings when
- From: Nix <nix@xxxxxxxxxxxxx>
mdadm 2.5.2 - Static built , Interesting warnings when
- From: "Mr. James W. Laferriere" <babydr@xxxxxxxxxxxxxxxx>
Re: When will the Areca RAID driver be merged into mainline?
- From: "Randy.Dunlap" <rdunlap@xxxxxxxxxxxx>
When will the Areca RAID driver be merged into mainline?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Multiple raids on one machine?
- From: Nix <nix@xxxxxxxxxxxxx>
Re: recover data from linear raid
- From: Dimitris Zilaskos <dzila@xxxxxxxxxxxxxxxxxxxxxxxx>
Re: Large single raid... - XFS over NFS woes
- From: Dexter Filmore <Dexter.Filmore@xxxxxx>
ANNOUNCE: mdadm 2.5.2 - A tool for managing Soft RAID under Linux
- From: Neil Brown <neilb@xxxxxxx>

[Index of Archives] [Linux RAID Wiki] [ATA RAID] [Linux SCSI Target Infrastructure] [Linux Block] [Linux IDE] [Linux SCSI] [Linux Hams] [Device Mapper] [Kernel] [Linux Admin] [Linux Net] [GFS] [RPM] [git] [Yosemite Forum] [Linux Networking]