RE: SATA ontrollers and Linux MD

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Folks, 

> I'm currently using a Promise Technologies TX4300 SATA II 
> 3.0GB/s controller, to which are connected 4 Seagate 
> Barracuda 7200.10 ST3320620AS 320GB drives. I've only had 
> this setup for
> 2 weeks but so far I'm happy with it. The controller is PCI 
> and costs about $66. the drives are about $100/each.

Thanks. Someone else mentioned the TX4 as being ok.

I'm also more seriously considering the Supermicro SAT2

Thanks for your thoughts.

Ruth

-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux