Why not just --set-faulty or --fail with mdadm? On Mon, 10 Jul 2006, Christian Pernegger wrote:
I'm (still) trying to setup a md array on the ICH7 SATA controller of an Intel SE7230NH1-E with 4 WD5000YS disks. On this controller (in ahci mode) I have not yet managed to get a disk mark as failed. - a bad cable just led to hangs and timeouts - pulling the power on one of the SATA drives (while the system is running) had the exact same result. Apparently the error handling up to 2.6.17 is so buggy that it never returns an error that might cause md to fail the disk. (Bad blocks maybe, can't test that.) Regards, C. - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
