Re: In Trouble--Please Help! (was Re: Can't add disk to failed raid array)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I'll certainly give that a try later on, as I need physical access to
the box.

The corruption part is worrisome...  When you did this, did you
experience corruption?  I'm running RAID6 with 7 disks; presumably even
with two disks out of whack, I should be in good shape...???

I was running a 5 disk RAID-5 and did not detect any corruption.  Neil
correct me if I am wrong, but I believe that since your failure
occured without power loss that the chances for data corruption in
this case are small.

Dan
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux