Re: Correct way to create multiple RAID volumes with hot-spare?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 23 Aug 2006 at 6:34am, Justin Piszcz wrote

On Tue, 22 Aug 2006, Steve Cousins wrote:

As for system information, it is (was) a Dual Opteron with CentOS 4.3 (now I'm putting FC5 on it as I write) with a 3Ware 8506-12 SATA RAID card that I am using in JBOD mode so I could do software RAID6.


If you are using SW RAID, there is no 2TB limit.

Ditto for more recent HW RAIDs. *However*, there are other considerations when dealing with >2TiB devices. E.g. you can't boot from them.

--
Joshua Baker-LePain
Department of Biomedical Engineering
Duke University
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux