Minor refresh to make 'biofill' go through a test_and_clear_bit check
before performing the copy. Which is important for the hardware offload
implementation where operations might need to be retried until DMA
resources are available.
---------
This patch moves the data copying portion of satisfying read requests into
the workqueue. It adds a 'read' (past tense) pointer to the r5dev structure
to to track reads that have been offloaded to the workqueue. When the copy
operation is complete the 'read' pointer is reused as the return_bi for the
bi_end_io() call.
Signed-off-by: Dan Williams <dan.j.willams@xxxxxxxxx>
drivers/md/raid5.c | 98 ++++++++++++++++++++++++++++++++-------------
include/linux/raid/raid5.h | 7 ++-
2 files changed, 76 insertions(+), 29 deletions(-)
===================================================================
Index: linux-2.6-raid/drivers/md/raid5.c
===================================================================
--- linux-2.6-raid.orig/drivers/md/raid5.c 2006-06-28 11:06:06.000000000 -0700
+++ linux-2.6-raid/drivers/md/raid5.c 2006-06-29 11:43:35.000000000 -0700
@@ -213,11 +213,11 @@
for (i = sh->disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
- if (dev->toread || dev->towrite || dev->written ||
+ if (dev->toread || dev->read || dev->towrite || dev->written ||
test_bit(R5_LOCKED, &dev->flags)) {
- printk("sector=%llx i=%d %p %p %p %d\n",
+ printk("sector=%llx i=%d %p %p %p %p %d\n",
(unsigned long long)sh->sector, i, dev->toread,
- dev->towrite, dev->written,
+ dev->read, dev->towrite, dev->written,
test_bit(R5_LOCKED, &dev->flags));
BUG();
}
@@ -1490,6 +1490,38 @@
ops_state_orig = ops_state = sh->ops.state;
spin_unlock(&sh->lock);
+ if (test_bit(STRIPE_OP_BIOFILL, &state)) {
+ PRINTK("%s: stripe %llu STRIPE_OP_BIOFILL op_state: %lx\n",
+ __FUNCTION__, (unsigned long long)sh->sector,
+ ops_state);
+
+ if (test_and_clear_bit(STRIPE_OP_BIOFILL_Copy, &ops_state)) {
+ raid5_conf_t *conf = sh->raid_conf;
+ struct bio *return_bi=NULL;
+
+ for (i=disks ; i-- ;) {
+ struct r5dev *dev = &sh->dev[i];
+ struct bio *rbi, *rbi2;
+ rbi = dev->read;
+ while (rbi && rbi->bi_sector < dev->sector + STRIPE_SECTORS) {
+ copy_data(0, rbi, dev->page, dev->sector);
+ rbi2 = r5_next_bio(rbi, dev->sector);
+ spin_lock_irq(&conf->device_lock);
+ if (--rbi->bi_phys_segments == 0) {
+ rbi->bi_next = return_bi;
+ return_bi = rbi;
+ }
+ spin_unlock_irq(&conf->device_lock);
+ rbi = rbi2;
+ dev->read = return_bi;
+ }
+ }
+
+ work++;
+ set_bit(STRIPE_OP_BIOFILL_Done, &ops_state);
+ }
+ }
+
if (test_bit(STRIPE_OP_COMPUTE, &state)) {
for (i=disks ; i-- ;) {
struct r5dev *dev = &sh->dev[i];
@@ -1725,6 +1757,7 @@
int i;
int syncing, expanding, expanded;
int locked=0, uptodate=0, to_read=0, to_write=0, failed=0, written=0;
+ int fill_complete=0, to_fill=0;
int non_overwrite = 0;
int failed_num=0;
struct r5dev *dev;
@@ -1740,45 +1773,49 @@
syncing = test_bit(STRIPE_SYNCING, &sh->state);
expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state);
expanded = test_bit(STRIPE_EXPAND_READY, &sh->state);
- /* Now to look around and see what can be done */
+ if (test_bit(STRIPE_OP_BIOFILL, &sh->state) &&
+ test_bit(STRIPE_OP_BIOFILL_Done, &sh->ops.state)) {
+ clear_bit(STRIPE_OP_BIOFILL, &sh->state);
+ clear_bit(STRIPE_OP_BIOFILL_Done, &sh->ops.state);
+ fill_complete++;
+ }
+ /* Now to look around and see what can be done */
rcu_read_lock();
for (i=disks; i--; ) {
mdk_rdev_t *rdev;
dev = &sh->dev[i];
clear_bit(R5_Insync, &dev->flags);
- PRINTK("check %d: state 0x%lx read %p write %p written %p\n",
- i, dev->flags, dev->toread, dev->towrite, dev->written);
+ PRINTK("check %d: state 0x%lx toread %p read %p write %p written %p\n",
+ i, dev->flags, dev->toread, dev->read, dev->towrite, dev->written);
/* maybe we can reply to a read */
- if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread) {
- struct bio *rbi, *rbi2;
- PRINTK("Return read for disc %d\n", i);
- spin_lock_irq(&conf->device_lock);
- rbi = dev->toread;
- dev->toread = NULL;
- if (test_and_clear_bit(R5_Overlap, &dev->flags))
- wake_up(&conf->wait_for_overlap);
- spin_unlock_irq(&conf->device_lock);
- while (rbi && rbi->bi_sector < dev->sector + STRIPE_SECTORS) {
- copy_data(0, rbi, dev->page, dev->sector);
- rbi2 = r5_next_bio(rbi, dev->sector);
- spin_lock_irq(&conf->device_lock);
- if (--rbi->bi_phys_segments == 0) {
- rbi->bi_next = return_bi;
- return_bi = rbi;
+ if (dev->read && fill_complete) {
+ return_bi = dev->read;
+ dev->read = NULL;
+ }
+
+ /* maybe we can start a biofill operation */
+ if (dev->toread) {
+ if (test_bit(R5_UPTODATE, &dev->flags)) {
+ if (!test_bit(STRIPE_OP_BIOFILL, &sh->state)) {
+ BUG_ON(dev->read);
+ spin_lock_irq(&conf->device_lock);
+ dev->read = dev->toread;
+ dev->toread = NULL;
+ if (test_and_clear_bit(R5_Overlap, &dev->flags))
+ wake_up(&conf->wait_for_overlap);
+ spin_unlock_irq(&conf->device_lock);
+ to_fill++;
}
- spin_unlock_irq(&conf->device_lock);
- rbi = rbi2;
- }
+ } else
+ to_read++;
}
/* now count some things */
if (test_bit(R5_LOCKED, &dev->flags)) locked++;
if (test_bit(R5_UPTODATE, &dev->flags)) uptodate++;
-
- if (dev->toread) to_read++;
if (dev->towrite) {
to_write++;
if (!test_bit(R5_OVERWRITE, &dev->flags))
@@ -1799,6 +1836,13 @@
set_bit(R5_Insync, &dev->flags);
}
rcu_read_unlock();
+
+ if (to_fill) {
+ set_bit(STRIPE_OP_BIOFILL, &sh->state);
+ set_bit(STRIPE_OP_BIOFILL_Copy, &sh->ops.state);
+ sh->ops.pending++;
+ }
+
PRINTK("locked=%d uptodate=%d to_read=%d"
" to_write=%d failed=%d failed_num=%d\n",
locked, uptodate, to_read, to_write, failed, failed_num);
Index: linux-2.6-raid/include/linux/raid/raid5.h
===================================================================
--- linux-2.6-raid.orig/include/linux/raid/raid5.h 2006-06-28 11:05:38.000000000 -0700
+++ linux-2.6-raid/include/linux/raid/raid5.h 2006-06-29 11:40:37.000000000 -0700
@@ -160,7 +160,7 @@
struct bio req;
struct bio_vec vec;
struct page *page;
- struct bio *toread, *towrite, *written;
+ struct bio *toread, *read, *towrite, *written;
sector_t sector; /* sector of this page */
unsigned long flags;
} dev[1]; /* allocated with extra space depending of RAID geometry */
@@ -240,6 +240,8 @@
#define STRIPE_OP_COMPUTE_End 16
#define STRIPE_OP_COMPUTE_Done 17
#define STRIPE_OP_COMPUTE_Recover 18
+#define STRIPE_OP_BIOFILL_Copy 19
+#define STRIPE_OP_BIOFILL_Done 20
/*
* Bit mask for status bits not to be cleared by the work queue thread
@@ -249,7 +251,8 @@
1 << STRIPE_OP_CHECK_Done |\
1 << STRIPE_OP_CHECK_IsZero |\
1 << STRIPE_OP_COMPUTE_Done |\
- 1 << STRIPE_OP_COMPUTE_Recover)
+ 1 << STRIPE_OP_COMPUTE_Recover |\
+ 1 << STRIPE_OP_BIOFILL_Done)
/*
* Plugging:
*
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
