Josh Litherland wrote:
On Sun, 2006-09-03 at 15:56 +1200, Richard Scobie wrote:
I am building 2.6.18rc5-mm1 and I cannot find the entry under "make
config", to enable the various RAID options.
Under "Device Drivers", switch on "Multi-device support".
Thanks. I must be going nuts, as it does not appear as an option. Below
is the list under "Device Drivers" if I do a "make menuconfig":
Generic Driver Options ---> x x
x x Connector - unified userspace <-> kernelspace linker --->
x x
x x Memory Technology Devices (MTD) --->
x x
x x Parallel port support --->
x x
x x Plug and Play support --->
x x
x x Block devices --->
x x
x x ATA/ATAPI/MFM/RLL support --->
x x
x x SCSI device support --->
x x
x x Serial ATA (prod) and Parallel ATA (experimental) drivers
--x x
x x Fusion MPT device support --->
x x
x x IEEE 1394 (FireWire) support --->
x x
x x I2O device support --->
x x
x x Network device support --->
x x
x x ISDN subsystem --->
x x
x x Telephony Support --->
x x
x x Input device support --->
x x
x x Character devices --->
x x
x x I2C support --->
x x
x x SPI support --->
x x
x x Dallas's 1-wire bus --->
x x
x x Hardware Monitoring support --->
x x
x x Misc devices --->
x x
x x Multimedia devices --->
x x
x x Graphics support --->
x x
x x Sound --->
x x
x x USB support --->
x x
x x MMC/SD Card support --->
x x
x x LED devices --->
x x
x x InfiniBand support --->
x x
x x EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
--x x
x x Real Time Clock --->
x x
x x DMA Engine support --->
x x
x x Industrial IO --->
Regards,
Richard
--
VGER BF report: U 0.50156
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
