adam radford wrote:
Jim,
Can you try the attached (and below) patch for 2.6.17.11?
Don't you want the sleep BEFORE setting the new value? ie. giving a wait
for status to change before checking it again?
Also, please make sure you are running the latest firmware.
Thanks,
-Adam
diff -Naur linux-2.6.17.11/drivers/scsi/3w-9xxx.c
linux-2.6.17.12/drivers/scsi/3w-9xxx.c
--- linux-2.6.17.11/drivers/scsi/3w-9xxx.c 2006-08-23
14:16:33.000000000 -0700
+++ linux-2.6.17.12/drivers/scsi/3w-9xxx.c 2006-08-28
17:48:29.000000000 -0700
@@ -943,6 +943,7 @@
before = jiffies;
while ((response_que_value & TW_9550SX_DRAIN_COMPLETED) !=
TW_9550SX_DRAIN_COMPLETED) {
response_que_value =
readl(TW_RESPONSE_QUEUE_REG_ADDR_LARGE(tw_dev));
+ msleep(1);
if (time_after(jiffies, before + HZ * 30))
goto out;
}
------------------------------------------------------------------------
diff -Naur linux-2.6.17.11/drivers/scsi/3w-9xxx.c linux-2.6.17.12/drivers/scsi/3w-9xxx.c
--- linux-2.6.17.11/drivers/scsi/3w-9xxx.c 2006-08-23 14:16:33.000000000 -0700
+++ linux-2.6.17.12/drivers/scsi/3w-9xxx.c 2006-08-28 17:48:29.000000000 -0700
@@ -943,6 +943,7 @@
before = jiffies;
while ((response_que_value & TW_9550SX_DRAIN_COMPLETED) != TW_9550SX_DRAIN_COMPLETED) {
response_que_value = readl(TW_RESPONSE_QUEUE_REG_ADDR_LARGE(tw_dev));
+ msleep(1);
if (time_after(jiffies, before + HZ * 30))
goto out;
}
--
bill davidsen <davidsen@xxxxxxx>
CTO TMR Associates, Inc
Doing interesting things with small computers since 1979
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
