On Wed, 2006-06-14 at 23:45 +0200, PFC wrote: > > 6X MaxLine 300GB SATAII 7200RPM Hard drive. > > Flip the jumper on the drive to set it to SATA1 (1.5 Gbps) instead of > SATA2. > On my PC Maxtor drives kept failing until I did this, not a problem since. > > Of course YMMV. > - > To unsubscribe from this list: send the line "unsubscribe linux-raid" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html Is this possible on all SATAII drives? I have a similar issue with Western Digital drives and can't find this information on their website.... actually check out the following link and look at their graphic HOWTO:- http://www.westerndigital.com/en/products/products.asp?driveid=131&language=en It appears that the one jumper setting (for SSC - is this what I'm looking for?) they discuss is described as being enabled and disabled with or without the jumper. - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
