Linux IDE Archive
[Prev Page][Next Page]
- [PATCH 19/24] jmicron: It works better if you get the file name right
- [PATCH 17/24] pata_qdi: Fix return code
- [PATCH 03/24] pata_amd - new chips
- [PATCH 24/24] jmicron: Missed one
- [PATCH 21/24] ata_jmicro: Fix an escapee
- [PATCH 08/24] pata_it821x: Fix pass through
- [PATCH 07/24] libata: Fix the host_set hacks and sort out simplex mode
- [PATCH 11/24] jmicron: Add quirks to force the device into a sane mode
- [PATCH 22/24] jmicron: Jmicron multifunction setup
- [PATCH 13/24] My name is Ingo Molnar, you killed my make allyesconfig, prepare to die
- [PATCH 10/24] ahci: Ensure that we don't grab both functions
- [PATCH 12/24] jmicron: Configuration
- PATA updates (rebased)
- [PATCH 09/24] pci_ids: Add JMicron identifiers as we need them in various drivers and quirks
- [PATCH 15/24] ata_generic - generic BIOS setup SFF ATA driver
- [PATCH 05/24] pata_ali: Revisions below 0x20 need CD config poking too
- [PATCH 01/24] ata_piix TIME0/TIME1 setup
- [PATCH 06/24] Sort out MC65 compile for now
- [PATCH 02/24] pata_ali - further debug work
- Re: Bug or HW? ata1: command timeout, stat 0x50 host_stat 0x4
- [RFT][PATCHSET] hotplug polling
- [PATCH 2/3] libata: add hp-poll support to controllers with hotplug interrutps
- [PATCH 3/3] libata: add hp-poll support to controllers without hotplug interrupts
- [PATCH 1/3] libata: implement hotplug by polling
- Re: [PATCH 0/6] AHCI suspend/resume support --take3
- PATCH: Move IDE to unmaintained, drop reference to old git tree
- libata SATA support for Sil 3726 port multiplier
- [PATCH 07/11] libata: reimplement controller-wide PM
- [PATCH 10/11] sata_sil24: separate out sil24_init_controller()
- [PATCH 11/11] sata_sil24: add suspend/sleep support
- [PATCH 08/11] sata_sil: separate out sil_init_controller()
- [PATCH 05/11] libata: implement PM EH actions
- [PATCH 09/11] sata_sil: add suspend/sleep support
- [PATCH 06/11] libata: reimplement per-dev PM
- [PATCH 03/11] libata: implement ATA_EHI_NO_AUTOPSY and QUIET
- [PATCHSET] new Power Management for libata, take 4
- [PATCH 02/11] libata: clean up debounce parameters and improve parameter selection
- [PATCH 01/11] libata: implement ATA_EHI_RESUME_LINK
- [PATCH 04/11] libata: separate out __ata_ehi_hotplugged()
- Re: sata_sil - broke at some point
- Re: sata_sil - broke at some point
- sata_sil - broke at some point
- [PATCH] libata: cosmetic, replace ap_lock w/ ap->lock in ata_scsi_error()
- [PATCH] libata: fix ehc->i.action setting in ata_eh_autopsy()
- Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
- Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
- Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
- Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
- Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
- Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
- Re: Bug or HW? ata1: command timeout, stat 0x50 host_stat 0x4
- Re: Parking hard disk head from drivers
- Problems with ICH7R (AHCI) and WD5000YS
- From: Christian Pernegger
- Re: long boot delay for SATA cdrom on current 2.6.17-git
- [PATCH 7/15] pcmcia: Make ide_cs work with the memory space of CF-Cards if IO space is not available
- Re: [PATCH -mm] ide_end_drive_cmd(): avoid instruction pipeline stall
- Re: [PATCH -mm] ide_end_drive_cmd(): avoid instruction pipeline stall
- Re: [PATCH -mm] ide_end_drive_cmd(): avoid instruction pipeline stall
- Re: [PATCHSET] new Power Management for libata, take 3
- Re: [PATCH 1/2] libata: make both legacy ports share one host_set , take #2
- [PATCH -mm] ide_end_drive_cmd(): avoid instruction pipeline stall
- Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
- Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
- Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
- Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
- [PATCH 9/9] sata_sx4.c conversion
- [PATCH 8/9] sata_sil24.c conversion
- [PATCH 7/9] sata_promise.c conversion
- [PATCH 6/9] sata_mv.c conversion
- [PATCH 5/9] libata-eh.c conversion
- [PATCH 4/9] libata-core.c conversion
- [PATCH 3/9] ata_piix.c conversion
- [PATCH 1/9] libata: change debugging macros/adjust dbg levels
- [PATCHSET] libata dbg scheme conversion, take 2
- [PATCH 2/9] ahci.c conversion
- Re: long boot delay for SATA cdrom on current 2.6.17-git
- Re: long boot delay for SATA cdrom on current 2.6.17-git
- Re: long boot delay for SATA cdrom on current 2.6.17-git
- Re: long boot delay for SATA cdrom on current 2.6.17-git
- long boot delay for SATA cdrom on current 2.6.17-git
- Re: [PATCH 1/9] libata: change debugging macros/adjust dbg levels
- Re: [PATCH 1/9] libata: change debugging macros/adjust dbg levels
- Re: [PATCH 1/9] libata: change debugging macros/adjust dbg levels
- Re: [PATCH 1/9] libata: change debugging macros/adjust dbg levels
- Re: [DOC] SATA status report updated
- Re: sata_vsc and device hotplug
- Re: [PATCHSET] libata dbg scheme conversion, take 1
- Re: [PATCH 1/9] libata: change debugging macros/adjust dbg levels
- Re: [PATCHSET] libata dbg scheme conversion, take 1
- Re: [PATCH 4/9] libata-core.c conversion
- Re: [PATCHSET] libata dbg scheme conversion, take 1
- Re: [PATCH 2/9] ahci.c conversion
- Re: [PATCH 5/9] libata-eh.c conversion
- Re: [PATCH 4/9] libata-core.c conversion
- Re: [PATCH 3/9] ata_piix.c conversion
- Re: [PATCH 2/9] ahci.c conversion
- Re: [PATCH 1/9] libata: change debugging macros/adjust dbg levels
- [PATCH 9/9] sata_sx4.c conversion
- [PATCH 5/9] libata-eh.c conversion
- [PATCH 7/9] sata_promise.c conversion
- [PATCH 6/9] sata_mv.c conversion
- [PATCH 8/9] sata_sil24.c conversion
- [PATCH 4/9] libata-core.c conversion
- [PATCH 1/9] libata: change debugging macros/adjust dbg levels
- [PATCH 3/9] ata_piix.c conversion
- [PATCH 2/9] ahci.c conversion
- [PATCHSET] libata dbg scheme conversion, take 1
- Re: 2.6.17 on VIA SP8000 sata: via_sata timeout (cmd 0xef) (retry) FIXED!!
- sata_vsc and device hotplug
- Re: [DOC] SATA status report updated
- Re: [DOC] SATA status report updated
- Re: 2.6.17 on VIA SP8000 sata: via_sata timeout (cmd 0xef) (retry)
- [PATCH 6/6] Implement the AHCI suspend/resume
- [PATCH 4/6] The definition of ahci_port_suspend()
- [PATCH 5/6] Update the users of new added functions
- [PATCH 3/6] The definition of ahci_port_standby() and ahci_port_spinup()
- [PATCH 2/6] The definition of ahci_start_fis_rx() and ahci_stop_fis_rx()
- [PATCH 1/6]The definition of ahci_start_engine() and ahci_stop_engine()
- [PATCH 0/6] AHCI suspend/resume support --take3
- Re: [PATCH 4/4] libata: Check per device max cdb length for SAS - drop
- [PATCH-stable] ahci: skip SRST for offline port
- 2.6.17 on VIA SP8000 sata: via_sata timeout (cmd 0xef) (retry)
- [PATCH] ata_piix: implement cached PCS and apply it to ICH5
- [PATCH 1/2] ata_piix: add host_set private structure
- [PATCH-stable 2/2] ata_piix: implement cached PCS and apply it to ICH5
- [PATCH-stable 1/2] ata_piix: add host_set private structure
- Just added Enjoy multi-orgasms using this powerful thing
- [PATCH] libata: add ap->pflags and move core dynamic flags to it
- [PATCH] sata_vsc: data_xfer should use mmio
- Re: [PATCH] libata: add host_set->next for legacy two host_sets case, take #3
- [PATCH 3/3] ipr: Support attaching SATA devices
- [PATCH 2/3] ipr: Handle new SAS error codes
- [PATCH 1/3] ipr: Add some hardware defined types for SATA
- [PATCH 0/3] ipr: Support SATA devices
- [PATCH 4/4] libata: Check per device max cdb length for SAS
- [PATCH 2/4] libata: Add ata_host_set_init
- [PATCH 3/4] libata: Add support for SATA attachment to SAS adapters
- [PATCH 1/4] libata: Conditionally set host->max_cmd_len
- [PATCH 0/4] libata: Support SATA attached via SAS
- Re: [PATCH] libata: add host_set->next for legacy two host_sets case, take #3
- Re: libata new EH issue - ATAPI device error not properly reported
- Re: [PATCH] libata: add host_set->next for legacy two host_sets case, take #3
- Re: [PATCH] libata: add host_set->next for legacy two host_sets case, take #3
- Re: [PATCH] libata: add host_set->next for legacy two host_sets case, take #3
- Re: libata new EH issue - ATAPI device error not properly reported
- libata new EH issue - ATAPI device error not properly reported
- Re: Bug or HW? ata1: command timeout, stat 0x50 host_stat 0x4
- Re: [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure()
- [PATCH 2/2] libata-dev: pata_pdc2027x - remove ATA_ENABLE_PATA ifdef
- [PATCH 1/2] libata-dev: pata_pdc2027x minor fix for new EH
- Re: [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure()
- Re: Bug or HW? ata1: command timeout, stat 0x50 host_stat 0x4
- Re: [git-patches] new Power Management for libata, take 3
- [PATCH 6/8] sata_sil: add suspend/sleep support
- [PATCH 5/8] sata_sil: separate out sil_init_controller()
- [PATCH 7/8] sata_sil24: separate out sil24_init_controller()
- [PATCH 8/8] sata_sil24: add suspend/sleep support
- [PATCH 2/8] libata: reimplement per-dev PM
- [PATCH 1/8] libata: implement PM EH actions
- [PATCH 4/8] libata: reimplement controller-wide PM
- [PATCHSET] new Power Management for libata, take 3
- [PATCH 3/8] libata: move ata_flush_cache() from libata-core.c to libata-eh.c
- Re: [git patches] libata update
- Re: [git patches] libata update
- [PATCH][RFT] HPT3xx: init code rewrite
- Bug or HW? ata1: command timeout, stat 0x50 host_stat 0x4
- Re: [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure()
- Re: [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure()
- Re: [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure()
- Re: [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure(), v2
- [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure(), v2
- Re: [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure()
- [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure()
- [PATCH 2/n] libata-core.c conversion to new debug scheme, part 2 of $N (50% done)
- Re: regarding ata_msg_*()
- Re: regarding ata_msg_*()
- [DOC] SATA status report updated
- Re: Improving sata_vsc PCI ID usage...
- Re: regarding ata_msg_*()
- [git patches] libata update
- Re: [-mm patch] make drivers/scsi/pata_it821x.c:it821x_passthru_dev_select() static
- Re: [PATCH] ata_piix: add ICH6/7/8 to Kconfig
- Re: [PATCH] sata_sil: disable hotplug interrupts on two ATI IXPs
- Re: [PATCH] libata: cosmetic updates
- Re: [PATCH 01/15] libata: move ata_eh_clear_action() upward
- Improving sata_vsc PCI ID usage...
- Re: [PATCH 4/6] libata: Add ata_host_flags
- Re: [PATCH 4/6] libata: Add ata_host_flags
- Re: PATCH: SC1200 debug printk
- Re: PATCH: SC1200 debug printk
- Re: [PATCH] sata_sil: disable hotplug interrupts on two ATI IXPs
- [RFC: 2.6 patch] drivers/ide/: possible cleanups
- [PATCH] ata_piix: add ICH6/7/8 to Kconfig
- PATCH: Set err_stops_fifo for newer Promise as well
- PATCH: Clean up pdc202xx_old so its more readable (done so I could work on libata ports)
- PATCH: Housekeeping on IDE drivers
- PATCH: Fix error handling for drives which clear the FIFO on error
- PATCH: SC1200 debug printk
- PATCH: backport piix fixes from libata into the legacy driver
- PATCH: Clean up siimage
- PATCH: Old IDE, fix SATA detection for cabling
- [PATCH] sata_sil: disable hotplug interrupts on two ATI IXPs
- Re: More information on ATI IXP failure in git9
- Re: More information on ATI IXP failure in git9
- Re: More information on ATI IXP failure in git9
- Re: More information on ATI IXP failure in git9
- Re: regarding ata_msg_*()
- Re: [PATCHSET] [PATCHSET] new Power Management for libata, take 2
- Re: [PATCHSET] [PATCHSET] new Power Management for libata, take 2
- Re: [PATCHSET] [PATCHSET] new Power Management for libata, take 2
- Re: regarding ata_msg_*()
- Re: regarding ata_msg_*()
- Re: [PATCH 0/3]ACPI support for SATA/PATA
- Re: [PATCHSET] [PATCHSET] new Power Management for libata, take 2
- Re: [PATCHSET] [PATCHSET] new Power Management for libata, take 2
- Re: [PATCHSET] [PATCHSET] new Power Management for libata, take 2
- Re: [PATCHSET] [PATCHSET] new Power Management for libata, take 2
- Re: [PATCHSET] [PATCHSET] new Power Management for libata, take 2
- Re: [PATCHSET] [PATCHSET] new Power Management for libata, take 2
- Re: [PATCH 11/15] libata: reimplement controller-wide PM
- Re: [PATCH 11/15] libata: reimplement controller-wide PM
- Re: More information on ATI IXP failure in git9
- Re: More information on ATI IXP failure in git9
- Re: More information on ATI IXP failure in git9
- Re: [-mm patch] make drivers/scsi/pata_it821x.c:it821x_passthru_dev_select() static
- Re: More information on ATI IXP failure in git9
- [-mm patch] make drivers/scsi/pata_it821x.c:it821x_passthru_dev_select() static
- Re: More information on ATI IXP failure in git9
- More information on ATI IXP failure in git9
- -git9 breaks SATA on ATI-IXP
- Re: [Bugme-new] [Bug 6745] New: kernel hangs when trying to read atip wiith cdrecord
- 2.6.17 on VIA SP8000 sata: via_sata timeout (cmd 0xef)
- Re: [ANNOUNCE] libata: new EH, NCQ, hotplug and Power Management patches against v2.6.17
- Re: [ANNOUNCE] libata: new EH, NCQ, hotplug and Power Management patches against v2.6.17
- regarding ata_msg_*()
- Re: [ANNOUNCE] libata: new EH, NCQ, hotplug and Power Management patches against v2.6.17
- Re: [Bugme-new] [Bug 6745] New: kernel hangs when trying to read atip wiith cdrecord
- Re: [Bugme-new] [Bug 6745] New: kernel hangs when trying to read atip wiith cdrecord
- Re: [ANNOUNCE] libata: new EH, NCQ, hotplug and Power Management patches against v2.6.17
- Re: [Bugme-new] [Bug 6745] New: kernel hangs when trying to read atip wiith cdrecord
- Re: [Bugme-new] [Bug 6745] New: kernel hangs when trying to read atip wiith cdrecord
- [PATCH] libata: cosmetic updates
- Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
- [ANNOUNCE] libata: new EH, NCQ, hotplug and Power Management patches against v2.6.17
- Re: [sata_sil] kernel 2.6.17(-mm2) test - timeout issue
- Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
- Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
- Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
- Re: [Bugme-new] [Bug 6745] New: kernel hangs when trying to read atip wiith cdrecord
- [sata_sil] kernel 2.6.17(-mm2) test - timeout issue
- Re: Hotplug drives on vt8251 with ahci module
- Re: [git-patch] new Power Management for libata, take 2
- [PATCH 11/15] libata: reimplement controller-wide PM
- [PATCH 15/15] sata_sil24: add suspend/sleep support
- [PATCH 12/15] sata_sil: separate out sil_init_controller()
- [PATCH 14/15] sata_sil24: separate out sil24_init_controller()
- [PATCH 13/15] sata_sil: add suspend/sleep support
- [PATCH 09/15] libata: reimplement per-dev PM
- [PATCH 10/15] libata: move ata_flush_cache() from libata-core.c to libata-eh.c
- [PATCH 06/15] libata: make two functions global
- [PATCH 08/15] libata: implement PM EH actions
- [PATCH 07/15] libata: implement ata_port_max_devices()
- [PATCH 05/15] libata: update ata_do_simple_cmd()
- [PATCH 02/15] libata: implement and use ata_deh_dev_action()
- [PATCH 01/15] libata: move ata_eh_clear_action() upward
- [PATCH 04/15] libata: move ata_do_simple_cmd() below ata_exec_internal()
- [PATCHSET] [PATCHSET] new Power Management for libata, take 2
- [PATCH 03/15] libata: clear EH action on device detach
- [git patches] major libata update
- Re: Hotplug drives on vt8251 with ahci module
- SATA150 TX4 very slow writing
- Re: Hotplug drives on vt8251 with ahci module
- [PATCH 2/3] The definition of all SATA-ACPI-related functions.
- [PATCH 0/3]ACPI support for SATA/PATA
- [PATCH 3/3] Update users of ACPI-SATA/PATA functions
- [PATCH 1/3] Makefile/Kconfig/doc/definition of noacpi
- Re: Hotplug drives on vt8251 with ahci module
- Re: [PATCH 2/6] libata: Add ata_scsi_dev_disabled
- Re: [PATCH 1/6] libata: Add host lock to struct ata_port
- Re: [PATCH] libata: implement per-dev EH action mask eh_info->dev_action[]
- Re: [PATCH 1/1] libata-dev: move the CDB-intr DMA blacklisting
- Re: [PATCH] ahci: disable NCQ support on vt8251
- Re: [PATCH 2.6.16-rc5 1/2] ahci: add another JMicron pci id
- Re: [PATCH 1/1] libata: minor patch for ATA_DFLAG_PIO
- Re: [PATCH] Add MCP65 support for sata_nv driver
- Re: [PATCH] Add MCP65 support for ahci driver
- Re: Parking hard disk head from drivers
- Parking hard disk head from drivers
- sata_vsc problems with libata-dev.git#upstream
- Re: Hotplug drives on vt8251 with ahci module
- Re: Hotplug drives on vt8251 with ahci module
- Re: [-mm patch] make drivers/scsi/pata_pcmcia.c:pcmcia_remove_one() static
- Re: Hotplug drives on vt8251 with ahci module
- Re: [ANNOUNCE] libata: new EH, NCQ, hotplug and PM patches against stable kernel
- Re: Hotplug drives on vt8251 with ahci module
- [PATCH 1/1] libata-dev: move the CDB-intr DMA blacklisting
- Re: [PATCH 0/6] AHCI suspend/resume support -- take 2
- [-mm patch] make drivers/scsi/pata_pcmcia.c:pcmcia_remove_one() static
- Re: [PATCH -mm 2/6] cpu_relax(): ide_wait_stat()
- [-mm patch] drivers/ide/legacy/ide-cs.c: make 2 functions static
- Re: [ANNOUNCE] libata: new EH, NCQ, hotplug and PM patches against stable kernel
- [PATCH -mm 2/6] cpu_relax(): ide_wait_stat()
- Re: BUG() with MV88SX6081 and other problems
- Re: [PATCH 0/6] AHCI suspend/resume support -- take 2
- From: Jeremy Fitzhardinge
- [PATCH] ahci: disable NCQ support on vt8251
- Re: Hotplug drives on vt8251 with ahci module
- Re: [PATCH] ide: fix revision comparison in ide_in_drive_list
- Re: LibPATA/ATA Errors Continue - Will there be a fix for this?
- Re: [PATCH] ide: fix revision comparison in ide_in_drive_list
- Re: 2.6.17-rc6-mm2 VIA PATA fails on some ATAPI drives
- ATIIXP patch
- Hotplug drives on vt8251 with ahci module
- Re: Seagate SATA 3GB/s drive connected to via vt8251 using ahci module
- Re: BUG() with MV88SX6081 and other problems
- Re: [PATCH] ide: fix revision comparison in ide_in_drive_list
- [Ubuntu PATCH] add some NVIDIA chipset IDs
- Re: BUG() with MV88SX6081 and other problems
- Re: [PATCH] ide: fix revision comparison in ide_in_drive_list
- Re: LibPATA/ATA Errors Continue - Will there be a fix for this?
- Re: LibPATA/ATA Errors Continue - Will there be a fix for this?
- Re: [PATCH] ide: fix revision comparison in ide_in_drive_list
- Re: Seagate SATA 3GB/s drive connected to via vt8251 using ahci module
- Re: BUG() with MV88SX6081 and other problems
- Re: [PATCH] Re: ATIIXP and libata
- Re: LibPATA/ATA Errors Continue - Will there be a fix for this?
- Re: LibPATA/ATA Errors Continue - Will there be a fix for this?
- Re: Seagate SATA 3GB/s drive connected to via vt8251 using ahci module
- Re: Seagate SATA 3GB/s drive connected to via vt8251 using ahci module
- Re: [PATCH] ide: disable dma for transcend CF
- Re: [PATCH] ide: disable dma for transcend CF
- Re: LibPATA/ATA Errors Continue - Will there be a fix for this?
- Re: 2.6.16.20 fails to boot on SATA system but works on IDE
- Re: [PATCH] ide: disable dma for transcend CF
- Re: LibPATA/ATA Errors Continue - Will there be a fix for this?
- Re: LibPATA/ATA Errors Continue - Will there be a fix for this?
- Re: Status of SAS ability to attach SATA devices
- [PATCH 1/1] libata: minor patch for ATA_DFLAG_PIO
- Re: Infinite loop on MODE-SENSE with a removable ATAPI sata device on VIA chipset
- LibPATA/ATA Errors Continue - Will there be a fix for this?
- Re: [PATCH] ide: disable dma for transcend CF
- [PATCH] ide: disable dma for transcend CF
- [PATCH] ide: fix revision comparison in ide_in_drive_list
- Re: [PATCH] sata_via: convert to new EH, take #3
- Re: [PATCH 1/6] sata_nv: kill not-working hotplug code
- Re: [PATCH] libata: convert several bmdma-style controllers to new EH, take #3
- Re: [PATCH 1/6] sata_nv: kill not-working hotplug code
- Re: [PATCH] Re: ATIIXP and libata
- Re: [PATCH] libata: implement per-dev EH action mask eh_info->dev_action[]
- Re: [PATCH] libata: implement per-dev EH action mask eh_info->dev_action[]
- [PATCH 2/2] libata: replace ap->hard_port_no with ap->port_no , take #2
- [PATCH 1/2] libata: make both legacy ports share one host_set , take #2
- [PATCH 0/2] libata: legacy mode fixes , take #2
- Re: Status of SAS ability to attach SATA devices
- Re: regarding conversion to new EH
- Re: regarding conversion to new EH
- Re: regarding conversion to new EH
- Re: regarding conversion to new EH
- Status of SAS ability to attach SATA devices
- Re: [PATCH] Re: ATIIXP and libata
- Re: Seagate SATA 3GB/s drive connected to via vt8251 using ahci module
- Re: Seagate SATA 3GB/s drive connected to via vt8251 using ahci module
- Re: Sometimes ata_piix fails to detect second SATA disk
- [PATCH] libata: implement per-dev EH action mask eh_info->dev_action[]
- Re: [PATCHSET] new Power Management for libata
- Re: [PATCH] Re: ATIIXP and libata
- Re: ICH7 fails to wakeup drive sata drive on ACPI resume
- ICH7 fails to wakeup drive sata drive on ACPI resume
- Re: rolled up patch for new Power Management for libata
- Re: [PATCHSET] new Power Management for libata
- Re: Sometimes ata_piix fails to detect second SATA disk
- Re: PM works with SiI3124 + SiI3726
- 2.6.17-rc6-mm2 VIA PATA fails on some ATAPI drives
- PM works with SiI3124 + SiI3726
- RE: [patch] Enable cdrom dma access with pdc20265_old
- RE: [patch] Remove code that has long been commented out from pdc20265_old
- [patch] pdc202xx_old depends on CONFIG_BLK_DEV_IDEDMA
- Sometimes ata_piix fails to detect second SATA disk
- Re: Seagate SATA 3GB/s drive connected to via vt8251 using ahci module
- Re: regarding conversion to new EH
- BUG() with MV88SX6081 and other problems
- Re: regarding conversion to new EH
- Re: regarding conversion to new EH
- regarding conversion to new EH
- [PATCH, RFC] pdc_adma: convert to new EH
- [PATCH, RFC] sata_qstor: convert to new EH
- [PATCH 6/6] sata_nv: add hotplug support
- [PATCH 5/6] sata_nv: convert to new EH
- [PATCH 4/6] sata_nv: better irq handlers
- [PATCH 2/6] sata_nv: kill struct nv_host_desc and nv_host
- [PATCH 3/6] sata_nv: simplify constants
- [PATCHSET] sata_nv: convert to new EH and add hotplug support, take 2
- [PATCH 1/6] sata_nv: kill not-working hotplug code
- 2.6.16.20 fails to boot on SATA system but works on IDE
- [PATCH] sata_via: convert to new EH, take #3
- [PATCH] libata: convert several bmdma-style controllers to new EH, take #3
- [PATCH 2.6.16-rc5 1/2] ahci: add another JMicron pci id
- Re: SATA: Marvell 88SE6141 support?
- Re: SATA: Marvell 88SE6141 support?
- Re: SATA: Marvell 88SE6141 support?
- Re: SATA: Marvell 88SE6141 support?
- Re: SATA: Marvell 88SE6141 support?
- Re: Another project for you... :)
- Re: Another project for you... :)
- Re: [PATCH 06/10] libata: implement new Power Management framework
- Re: [PATCH 06/10] libata: implement new Power Management framework
- Re: Infinite loop on MODE-SENSE with a removable ATAPI sata device on VIA chipset
- Re: [PATCH] libata: convert several bmdma-style controllers to new EH, take #2
- Re: Another project for you... :)
- Re: [PATCH 05/10] libata: implement new EH action ATA_EH_SPINUP
- Re: [PATCH 05/10] libata: implement new EH action ATA_EH_SPINUP
- Re: [PATCH 4/7] sata_nv: implement irq manipulation methods
- Re: [PATCHSET] new Power Management for libata
- Re: [PATCH 06/10] libata: implement new Power Management framework
- Re: Another project for you... :)
- Re: [PATCH 06/10] libata: implement new Power Management framework
- Re: Infinite loop on MODE-SENSE with a removable ATAPI sata device on VIA chipset
- Re: [PATCHSET] new Power Management for libata
- Re: [PATCH 05/10] libata: implement new EH action ATA_EH_SPINUP
- Re: [PATCH 4/7] sata_nv: implement irq manipulation methods
- Re: [PATCH] libata: convert several bmdma-style controllers to new EH, take #2
- Re: [PATCH] sata_via: convert to new EH, take #2
- [PATCH] libata: convert several bmdma-style controllers to new EH, take #2
- [PATCH 4/7] sata_nv: implement irq manipulation methods
- [PATCH 2/7] sata_nv: kill struct nv_host
- [PATCH 5/7] sata_nv: improve irq handler
- [PATCH 3/7] sata_nv: simplify interrupt constants
- [PATCH 6/7] sata_nv: implement new EH
- [PATCH 1/7] sata_nv: kill not-working hotplug code
- [PATCH 7/7] sata_nv: add hotplug support
- [PATCHSET] sata_nv: convert to new EH and add hotplug support
- Re: [PATCH] libata: convert several bmdma-style controllers to new EH
- Re: [PATCH 06/10] libata: implement new Power Management framework
- [PATCH] libata: convert several bmdma-style controllers to new EH
- [PATCH] sata_via: convert to new EH
- Re: rolled up patch for new Power Management for libata
- Re: [RFC] ATA host-protected area (HPA) device mapper?
- Re: [PATCH 06/10] libata: implement new Power Management framework
- rolled up patch for new Power Management for libata
- Re: [PATCH 06/10] libata: implement new Power Management framework
- Re: [PATCH 06/10] libata: implement new Power Management framework
- Re: [PATCH 06/10] libata: implement new Power Management framework
- Re: [PATCH 06/10] libata: implement new Power Management framework
- Re: [PATCH 06/10] libata: implement new Power Management framework
- Re: [PATCHSET] new Power Management for libata
- Re: [PATCH 06/10] libata: implement new Power Management framework
- [PATCH 1/n] libata-core.c conversion to new dbg scheme, v0.2 - part 1 (25% done)
- [PATCH 2/n] libata.h redo dbg messages level order v0.2
- Re: [PATCH 01/10] libata: power down controller only on PMSG_SUSPEND
- Re: [PATCH 06/10] libata: implement new Power Management framework
- Re: [PATCH] Re: ATIIXP and libata
- Re: Nobody cares about the ATIIXP troubles reported since October ?
- Re: Infinite loop on MODE-SENSE with a removable ATAPI sata device on VIA chipset
- Fwd: 2.6.16-rc6-mm2
- [PATCH 5/6] libata: Add support for SATA attachment to SAS adapters
- [PATCH 6/6] libata: Check per device max cdb length for SAS
- [PATCH 4/6] libata: Conditionally set host->max_cmd_len
- [PATCH 3/6] libata: Add ata_host_flags
- [PATCH 2/6] libata: Add ata_scsi_dev_disabled
- [PATCH 1/6] libata: Add host lock to struct ata_port
- Re: [PATCH 4/6] libata: Add ata_host_flags
- Re: [PATCH 5/6] libata: Per device max command length checking
- Re: [PATCH 01/10] libata: power down controller only on PMSG_SUSPEND
- Re: [PATCH 06/10] libata: implement new Power Management framework
- kernel module sata_via
- Re: [PATCHSET] new Power Management for libata
- [PATCH 08/10] sata_sil: add suspend/sleep support
- [PATCH 05/10] libata: implement new EH action ATA_EH_SPINUP
- [PATCHSET] new Power Management for libata
- [PATCH 07/10] sata_sil: separate out sil_init_controller()
- [PATCH 06/10] libata: implement new Power Management framework
- [PATCH 04/10] libata: update ata_do_simple_cmd()
- [PATCH 10/10] sata_sil24: add suspend/sleep support
- [PATCH 09/10] sata_sil24: separate out sil24_init_controller()
- [PATCH 02/10] libata: kill per-device PM
- [PATCH 03/10] libata: move ata_do_simple_cmd() right below ata_exec_internal()
- [PATCH 01/10] libata: power down controller only on PMSG_SUSPEND
- Re: [PATCH 1/2] libata: kill ATA_FLAG_SRST
- Re: [PATCH 1/2] libata: kill ATA_FLAG_SRST
- [PATCH 2/2] libata: shift ATA_FLAG_* bits to make room for a new flag
- [PATCH 1/2] libata: kill ATA_FLAG_SRST
- [git patch] libata fix
- Re: [PATCH] libata: add host_set->next for legacy two host_sets case, take #3
- Re: [PATCH] libata: fix oops caused rescanning NULL sdev
- [PATCH] libata: add host_set->next for legacy two host_sets case, take #3
- [PATCH] libata: fix oops caused rescanning NULL sdev
- Re: [git-patch] hotplug fix patches added
- Re: [PATCH] libata: add host_set->next for legacy two host_sets case, take #2
- Re: [git-patch] hotplug fix patches added
- Re: [PATCH] sata_sil: update device hotplug handling, take #2
- Re: [PATCH] libata: add host_set->next for legacy two host_sets case, take #2
- Re: Seagate SATA 3GB/s drive connected to via vt8251 using ahci module
- Re: Seagate SATA 3GB/s drive connected to via vt8251 using ahci module
- Re: Seagate SATA 3GB/s drive connected to via vt8251 using ahci module
- [PATCH] libata: add host_set->next for legacy two host_sets case, take #2
- [PATCH] sata_sil: update device hotplug handling, take #2
- AHCI suspend/resume patch can't work with latest #upstream
- Re: [PATCH] sata_sil: update device hotplug handling
- Re: [PATCH] libata: add host_set->next for legacy two host sets case
- Re: Maybe a corrupted BIOS?
- Re: [PATCH] libata: add host_set->next for legacy two host sets case
- Re: [PATCH] libata: fix comment above ata_exec_internal()
- Re: [PATCH] libata: fix ATA_EH_REVALIDATE clearing
- Re: [PATCH] libata: fast exit from EH while unloading
- Re: [PATCH] sata_sil: add controller unplug detection in sil_interrupt()
- Re: [PATCH] sata_sil: update device hotplug handling
- [git-patch] 6 misc patches just posted
- [PATCH] sata_sil: add controller unplug detection in sil_interrupt()
- [PATCH] sata_sil: update device hotplug handling
- [PATCH] libata: add host_set->next for legacy two host sets case
- Re: Maybe a corrupted BIOS?
- [PATCH] libata: fast exit from EH while unloading
- [PATCH] libata: fix ATA_EH_REVALIDATE clearing
- [PATCH] libata: fix comment above ata_exec_internal()
- Maybe a corrupted BIOS?
- Re: [PATCH] Snoop SET FEATURES - WRITE CACHE ENABLE/DISABLE command(v5)
- Re: [PATCH] Snoop SET FEATURES - WRITE CACHE ENABLE/DISABLE command(v5)
- Re: [PATCH] Snoop SET FEATURES - WRITE CACHE ENABLE/DISABLE command(v5)
- Re: [PATCH] Snoop SET FEATURES - WRITE CACHE ENABLE/DISABLE command(v5)
- [PATCH] Snoop SET FEATURES - WRITE CACHE ENABLE/DISABLE command(v5)
- Re: DMADIR+AHCI slows boot a lot
- Re: libata-tj-stable success report, with minor patch
- Re: [PATCH v5] Snoop SET FEATURES - WRITE CACHE ENABLE/DISABLE command
- Re: [PATCH v5] Snoop SET FEATURES - WRITE CACHE ENABLE/DISABLE command
- Re: [PATCH 1/n] libata-core.c conversion to new debugging scheme, part 1 (25% done)
- Re: [PATCH v4] Snoop SET FEATURES - WRITE CACHE ENABLE/DISABLE command
- Re: libata-tj-stable success report, with minor patch
- Re: [PATCH v4] Snoop SET FEATURES - WRITE CACHE ENABLE/DISABLE command
- Re: [PATCH 6/6] libata: Add support for SATA attachment to SAS adapters
- Re: [PATCH 5/6] libata: Per device max command length checking
- Re: [PATCH 4/6] libata: Add ata_host_flags
- Re: [PATCH 2/6] libata: Add host lock to struct ata_port
- Re: [PATCH 1/6] libata: Setup nbytes in ata_sg_init_one
- [PATCH v5] Snoop SET FEATURES - WRITE CACHE ENABLE/DISABLE command
- Re: [PATCH 1/n] libata-core.c conversion to new debugging scheme, part 1 (25% done)
- Re: [PATCH] sata_sil24: endian anotations
- Re: [PATCH 2.6.17-rc6] sata_mv: grab host lock inside eng_timeout
- DMADIR+AHCI slows boot a lot
- libata-tj-stable success report, with minor patch
- [PATCH] HPT370: clean up DMA timeout handling
- Re: [RFC] ATA host-protected area (HPA) device mapper?
- [ANN] libata "chilled" for 2.6.18
- [PATCH] libata: increase max-sectors to 256
- Re: [git-patch] hotplug fix patches added
- Re: [git-patch] hotplug fix patches added
- Re: [git-patch] hotplug fix patches added
- Re: LibPATA code issues / 2.6.16 (previously, 2.6.15.x)
- [git-patch] hotplug fix patches added
- Re: [2.6.17-rc6-mm1] Oops during sata_promise init
- Re: [RFC] ATA host-protected area (HPA) device mapper?
- Power down DVD drive on Sony Vaio VGN-TX27GP
- Re: Another project for you... :)
- Re: Another project for you... :)
- Re: [RFC] ATA host-protected area (HPA) device mapper?
- RE : Re: [RFC] ATA host-protected area (HPA) device mapper?
- interlock switch
- Re: [RFC] ATA host-protected area (HPA) device mapper?
- RE : Re: [RFC] ATA host-protected area (HPA) device mapper?
- Re: [PATCH][INCOMPLETE] sata_nv: merge ADMA support
- Re: [RFC] ATA host-protected area (HPA) device mapper?
- Re: [RFC] AHCI Command Completion Coalescing(CCC) proposal
- Re: [RFC] AHCI Command Completion Coalescing(CCC) proposal
- [RFC] ATA host-protected area (HPA) device mapper?
- Re: [BUGREPORT 1/3] Kernel Oops with HPT372A IDE controller
- Re: Seagate SATA 3GB/s drive connected to via vt8251 using ahci module
- Re: [RFC] AHCI Command Completion Coalescing(CCC) proposal
- Re: [RFC] ATA host-protected area (HPA) device mapper?
- Re: [RFC] AHCI Command Completion Coalescing(CCC) proposal
- Re: [RFC] AHCI Command Completion Coalescing(CCC) proposal
- Re: 2.6.17-rc5-mm3: oops when ejecting dock
- From: Jeremy Fitzhardinge
- Re: [PATCH 02/02] libata: implement ata_eh_wait()
- Re: [PATCH 02/02] libata: implement ata_eh_wait()
- Re: [RFC] AHCI Command Completion Coalescing(CCC) proposal
- Re: [RFC] AHCI Command Completion Coalescing(CCC) proposal
- Re: [RFC] AHCI Command Completion Coalescing(CCC) proposal
- Re: [RFC] AHCI Command Completion Coalescing(CCC) proposal
- Re: [RFC] AHCI Command Completion Coalescing(CCC) proposal
- [RFC] ATA host-protected area (HPA) device mapper?
- Re: Another project for you... :)
- Re: [RFC] AHCI Command Completion Coalescing(CCC) proposal
- Another project for you... :)
- Re: [PATCH 03/13] libata-hp: implement SCSI part of hotplug
- Re: [PATCH 13/13] libata-hp: move ata_do_reset() to libata-eh.c
- Re: [RFC] AHCI Command Completion Coalescing(CCC) proposal
- Re: [PATCH 13/13] libata-hp: move ata_do_reset() to libata-eh.c
- ICH8 docs available publicly
- Re: [PATCH 13/13] libata-hp: move ata_do_reset() to libata-eh.c
- Re: [PATCH 03/13] libata-hp: implement SCSI part of hotplug
- Re: [PATCHSET 02/03] prep LLDDs for hotplug support, take 4
- Re: [PATCHSET 01/03] prep for hotplug support, take 5
- Re: [PATCH 02/02] libata: implement ata_eh_wait()
- Re: [PATCH 01/02] libata: shift host flag constants
- Seagate SATA 3GB/s drive connected to via vt8251 using ahci module
- Re: [RFC] AHCI Command Completion Coalescing(CCC) proposal
- Re: [PATCH 0/6] libata: Support SATA attached via SAS
- [RFC] AHCI Command Completion Coalescing(CCC) proposal
- Re: [PATCH 0/6] libata: Support SATA attached via SAS
- Re: [PATCH][INCOMPLETE] sata_nv: merge ADMA support
- Re: [PATCH 0/6] libata: Support SATA attached via SAS
- Re: 2.6.17-rc6: libata WARN_ON() in ata_scsi_error
- Re: [PATCH 0/6] libata: Support SATA attached via SAS
- [PATCH 2/2] ipr: Support attaching SATA devices
- 2.6.17-rc6: libata WARN_ON() in ata_scsi_error
- [PATCH 2.6.17-rc6] sata_mv: grab host lock inside eng_timeout
- [PATCH 3/6] libata: Add ata_scsi_dev_disabled
- [PATCH 1/2] ipr: Add some hardware defined types for SATA
- [PATCH 0/2] ipr: Support SATA devices
- [PATCH 4/6] libata: Add ata_host_flags
- [PATCH 5/6] libata: Per device max command length checking
- [PATCH 6/6] libata: Add support for SATA attachment to SAS adapters
- [PATCH 2/6] libata: Add host lock to struct ata_port
- [PATCH 1/6] libata: Setup nbytes in ata_sg_init_one
- [PATCH 0/6] libata: Support SATA attached via SAS
- Re: 2.6.17-rc5-mm3: oops when ejecting dock
- Nobody cares about the ATIIXP troubles reported since October ?
- Re: 2.6.17-rc5-mm3: oops when ejecting dock
- Re: 2.6.17-rc5-mm3: oops when ejecting dock
- From: Jeremy Fitzhardinge
- hotplugging ide devices on a dock station
- Re: [PATCH] sata_promise: Port enumeration order - SATA 150 TX4, SATA 300 TX4
- Re: 2.6.17-rc5-mm3: oops when ejecting dock
- [PATCH] libata: add ata_port->private_flags
- [PATCH 4/6] The definition of ahci_port_suspend()
- [PATCH 3/6] The definition of ahci_port_standby() and ahci_port_spinup()
- Re: [PATCHSET] block: fix PIO cache coherency bug, take 2
- [PATCH 2/6] The definition of ahci_start_fis_rx() and ahci_stop_fis_rx()
- [PATCH 0/6] AHCI suspend/resume support -- take 2
- [PATCH 6/6] Implement the AHCI suspend/resume
- [PATCH 5/6] Update the users of new added functions
- [PATCH 1/6] The definition of ahci_start_engine() and ahci_stop_engine()
- [PATCH] sata_sil24: endian anotations
- Re: [PATCHSET] block: fix PIO cache coherency bug, take 2
- Re: [PATCHSET] block: fix PIO cache coherency bug, take 2
- Re: [PATCHSET] block: fix PIO cache coherency bug, take 2
- Re: [PATCHSET] block: fix PIO cache coherency bug, take 2
- Re: [PATCHSET] block: fix PIO cache coherency bug, take 2
- Re: [PATCHSET] block: fix PIO cache coherency bug, take 2
- Re: [PATCHSET] block: fix PIO cache coherency bug, take 2
- Re: [PATCHSET] block: fix PIO cache coherency bug, take 2
- Re: [PATCHSET] block: fix PIO cache coherency bug, take 2
- Re: [PATCH] swsusp: allow drivers to determine between write-resume and actual wakeup
- Re: [PATCH] swsusp: allow drivers to determine between write-resume and actual wakeup
- Re: [PATCH] swsusp: allow drivers to determine between write-resume and actual wakeup
- Re: [PATCH] swsusp: allow drivers to determine between write-resume and actual wakeup
- Re: [PATCH] swsusp: allow drivers to determine between write-resume and actual wakeup
- [PATCH] swsusp: allow drivers to determine between write-resume and actual wakeup
- Re: [PATCH 6/6] Implement the AHCI suspend/resume
- Re: [PATCH] HPT3x7: merge speedproc handlers
- Re: [PATCHSET] block: fix PIO cache coherency bug, take 2
- Re: [PATCHSET] block: fix PIO cache coherency bug, take 2
- Re: [PATCH 4/5] SCSI: add cpu cache flushes after kmapping and modifying a page
- From: Guennadi Liakhovetski
- Re: [PATCH 2.6.16.16] sata_sil24: SII3124 sata driver endian problem
- Re: [2.6.17-rc5-mm2+ahci resume] NULL pointer dereference in cfq_dispatch_requests
- From: Jeremy Fitzhardinge
- Re: [PATCH 2.6.16.16] sata_sil24: SII3124 sata driver endian problem
- Re: [PATCH 4/5] SCSI: add cpu cache flushes after kmapping and modifying a page
- Re: [PATCH 2/5] ide: add cpu cache flushes after kmapping and modifying a page
- Re: [PATCH 4/5] SCSI: add cpu cache flushes after kmapping and modifying a page
- Re: [PATCH 2/5] ide: add cpu cache flushes after kmapping and modifying a page
- Re: [PATCH 1/5] arm: implement flush_kernel_dcache_page()
- Re: [PATCH 1/5] arm: implement flush_kernel_dcache_page()
- Re: [PATCH 1/5] arm: implement flush_kernel_dcache_page()
- [PATCH 2/n] libata-core.c conversion to new debugging scheme, part 2 (50% done)
- Re: [PATCH 1/5] (REPOST) arm: implement flush_kernel_dcache_page()
- [PATCH 5/5] md: add cpu cache flushes after kmapping and modifying a page
- [PATCH 1/5] arm: implement flush_kernel_dcache_page()
- [PATCH 4/5] SCSI: add cpu cache flushes after kmapping and modifying a page
- [PATCH 2/5] ide: add cpu cache flushes after kmapping and modifying a page
- [PATCHSET] block: fix PIO cache coherency bug, take 2
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]