Re: Libata-tj-stable patch /w sil3124 and PMP... 'device or resource busy'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Eric Windisch wrote:
First, I should note that I've attempted to use the latest libata-tj-stable patch, against 2.6.17.4 and 2.6.17.7 (it patched cleanly), and I've tried 2.6.18-rc3. All three have given me either the same, or a worse result. My controller is a sil3124, I have 5 sata drives, and I'm using a couple sil 3726 PMPs (to support a potential maximum of 12 drives with my Norco 1220 disk array).

Regarding the behavior, while I can see all 5 disks, and even partition them (iirc, parted worked, but fdisk didn't), and see my created partitions, when attempting to use 'mdadm --create', I get the error: "Device or resource busy". mkfs.ext3 gives a similar error as well. The disks are not mounted or otherwise being accessed (such as via software raid or lvm).

Hello, Eric.

Can you post the result of 'dmesg', 'cat /proc/mounts' and 'fuser -v /dev/sdX#'?

--
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux