Linux IDE Archive

• Thread Index

• Re: [PATCH] ide-core: remove conditional compiling with MODULE in ide-core.c
  • From: Bodo Eggert
• [PATCH] ide-tape: dump gcw fields on error in idetape_identify_device()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-scsi: remove needless SELECT_DRIVE() call
  • From: Bartlomiej Zolnierkiewicz
• Re: PROBLEM: SATA hotplugging not working with nForce MCP61
  • From: Tuomas Jormola
• [PATCH 3/3 2.6.24-git] PPC/LIBATA: Select HAVE_PATA_PLATFORM for ARCH_PPC
  • From: Ben Dooks
• [no subject]
  • From: Ben Dooks
• [PATCH 0/3 2.6.24-git] Add HAVE_PLATFROM_PATA Kconfig
  • From: Ben Dooks
• [PATCH 1/3 2.6.24-git] LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver
  • From: Ben Dooks
• [PATCH 0/3 2.6.24-git] Add HAVE_PLATFORM_PATA Kconfig
  • From: Ben Dooks
• [PATCH 1/3 2.6.24-git] LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver
  • From: Ben Dooks
• [PATCH 2/3 2.6.24-git] ARM/RPC: Use HAVE_PATA_PLATFORM to select pata platform driver
  • From: Ben Dooks
• [PATCH 2/3 2.6.24-git] ARM/RPC: Use HAVE_PATA_PLATFORM to select pata platform driver
  • From: Ben Dooks
• [PATCH] ide-pci-generic: kill the unused ifdef/endif/MODULE code
  • From: Denis Cheng
• Re: AHCI driver preferring nr_ports over port map
  • From: Tejun Heo
• [PATCH] ide-core: remove conditional compiling with MODULE in ide-core.c
  • From: Denis Cheng
• Re: Hitachi 7K1000 1tb drives and sata_sil 3114 chipset
  • From: Tejun Heo
• Re: Problem with ata layer in 2.6.24
  • From: Tejun Heo
• Re: PCI: Remove users of pci_enable_device_bars()
  • From: Jeff Garzik
• Re: [PATCH] PCI subsystem: AMD SATA IDE mode quirk
  • From: Jeff Garzik
• Re: ATA Problems: Back in the Land of the Unhappy Camper
  • From: Tejun Heo
• Re: PROBLEM: SATA hotplugging not working with nForce MCP61
  • From: Tejun Heo
• Re: 2.6.24 sata_sil Sil3114 drive clicking / restarting?
  • From: Tejun Heo
• RE: [PATCH 2.6.23.11]: [sata_svw]: Add ATAPI DMA support for HT1x00 SATA controller
  • From: Anantha Subramanyam
• Re: excess timeouts accessing pci-sata card both ports
  • From: Tejun Heo
• RE: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Shane Huang
• Re: SiI 3512 Serial ATA Controller - kernel 2.6.23
  • From: Tejun Heo
• [PATCH 3/5] ide: remove ide_setup_ports()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/5] ide: add ide_read_error() inline helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/5] ide: add ide_read_[alt]status() inline helpers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/5] ide: remove redundant BUG_ON() from [atapi_]reset_pollfunc()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/5] ide: remove write-only ->sata_misc[] from ide_hwif_t
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2.6.23.11]: [sata_svw]: Add ATAPI DMA support for HT1x00 SATA controller
  • From: Jeff Garzik
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 5/9] libata: implement and use SHT initializers and ops inheritance
  • From: Tejun Heo
• Re: [PATCH 7/8] ide: add struct ide_port_info instances to legacy host drivers
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2 v3] sata_mv: Support SoC controllers
  • From: Jeff Garzik
• [git patches] IDE updates part #3
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] ide/ppc/pmac.c section fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] ide: make wait_drive_not_busy() static again
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] small ide-scan-pci.c cleanup
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] Use on-board instead of built-in in config options
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] unexport ide_dma_on
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: James Bottomley
• Re: [PATCH RESEND] libata: implement drain buffers
  • From: James Bottomley
• Re: [PATCH 9/9] libata: make reset related methods proper port operations
  • From: Jeff Garzik
• Re: [PATCH 5/9] libata: implement and use SHT initializers and ops inheritance
  • From: Jeff Garzik
• Re: [PATCH 4/9] libata: normalize port_info, port_operations and sht tables
  • From: Jeff Garzik
• Re: [PATCH 3/9] libata: implement and use ata_noop_irq_clear()
  • From: Jeff Garzik
• Re: [PATCH 1/9] libata: PCI device should be powered up before being accessed
  • From: Jeff Garzik
• Re: [PATCH #upstream] libata: make EH fail gracefully if no reset method is available
  • From: Jeff Garzik
• Re: [PATCH 2/4] libata: update ATAPI overflow draining
  • From: Jeff Garzik
• Re: [PATCHSET libata-dev#upstream] libata: prefer hardreset
  • From: Jeff Garzik
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: Jeff Garzik
• Re: [PATCH RESEND] libata: implement drain buffers
  • From: Jeff Garzik
• Re: [PATCH 2/2 v3] sata_mv: Support SoC controllers
  • From: saeed bishara
• [PATCH RESEND] libata: implement drain buffers
  • From: James Bottomley
• [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: James Bottomley
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Kiyoshi Ueda
• Re: [PATCH 2/2 v3] sata_mv: Support SoC controllers
  • From: Paul Mundt
• Re: [PATCH #upstream] libata: implement libata.force module parameter
  • From: Sam Ravnborg
• [git patches] libata updates
  • From: Jeff Garzik
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Borislav Petkov
• Re: [PATCH #upstream] libata: implement libata.force module parameter
  • From: Bartlomiej Zolnierkiewicz
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Kiyoshi Ueda
• Re: [PATCH #upstream] libata: implement libata.force module parameter
  • From: Jeff Garzik
• Re: [PATCH] pci: allow multiple calls to pcim_enable_device()
  • From: Jeff Garzik
• Re: [PATCH 1/4] [libata] Blackfin pata-bf54x driver: Remove obsolete PM function
  • From: Jeff Garzik
• Re: [PATCH] pata_legacy: multiple updates (rediff as asked)
  • From: Jeff Garzik
• Re: [PATCH] pata_sl82c105: dual channel support
  • From: Jeff Garzik
• Re: [2.6 patch] ata_piix.c: make piix_merge_scr() static
  • From: Jeff Garzik
• Re: [PATCH 2/2 v3] sata_mv: Support SoC controllers
  • From: Jeff Garzik
• Re: [PATCH] sata_nv: fix for completion handling
  • From: Jeff Garzik
• Re: [PATCH 1/2 v3] sata_mv: Remove PCI dependency
  • From: Jeff Garzik
• AHCI driver preferring nr_ports over port map
  • From: Jan Beulich
• [PATCH #upstream] libata: implement libata.force module parameter
  • From: Tejun Heo
• Re: libata pm
  • From: dusty@xxxxxx
• Re: libata pm
  • From: Tejun Heo
• Re: libata pm
  • From: Mark Lord
• Re: libata pm
  • From: Tejun Heo
• Re: libata pm
  • From: dusty@xxxxxx
• Re: PROBLEM REMAINS: [sata_nv ADMA breaks ATAPI] Crash on accessing DVD-RAM
  • From: Alexander
• Re: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Tejun Heo
• Re: [PATCH 0/32] ide-tape redux v1
  • From: Borislav Petkov
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Borislav Petkov
• Re: PROBLEM REMAINS: [sata_nv ADMA breaks ATAPI] Crash on accessing DVD-RAM
  • From: Robert Hancock
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Kiyoshi Ueda
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Borislav Petkov
• Re: Add one more HITACHI SATA disk to NCQ blacklist
  • From: Simos Xenitellis
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Kiyoshi Ueda
• Re: Bug: get EXT3-fs error Allocating block in system zone
  • From: Marco Gatti
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Jens Axboe
• Re: Add one more HITACHI SATA disk to NCQ blacklist
  • From: Mark Lord
• Re: Add one more HITACHI SATA disk to NCQ blacklist
  • From: Mark Lord
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Kiyoshi Ueda
• Add one more HITACHI SATA disk to NCQ blacklist
  • From: Simos Xenitellis
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Florian Lohoff
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Jens Axboe
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Jens Axboe
• RE: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Shane Huang
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Mikael Pettersson
• RE: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Shane Huang
• Re: [PATCHSET libata-dev#upstream] clean up scsi_host_templates and ata_port_operations
  • From: Akira Iguchi
• Re: [PATCHSET libata-dev#upstream] clean up scsi_host_templates and ata_port_operations
  • From: Akira Iguchi
• Hitachi 7K1000 1tb drives and sata_sil 3114 chipset
  • From: Andrew Paprocki
• Re: [PATCH] pci: allow multiple calls to pcim_enable_device()
  • From: Greg KH
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Nai Xia
• Re: DMA mapping on SCSI device?
  • From: Matthew Wilcox
• Re: [PATCH 5/9] libata: implement and use SHT initializers and ops inheritance
  • From: Tejun Heo
• Re: [PATCH 5/9] libata: implement and use SHT initializers and ops inheritance
  • From: Mark Lord
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Mark Lord
• Re: [PATCH 5/9] libata: implement and use SHT initializers and ops inheritance
  • From: Tejun Heo
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Tejun Heo
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Tejun Heo
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Roland Dreier
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Kiyoshi Ueda
• Re: libata pm
  • From: Tejun Heo
• Re: DMA mapping on SCSI device?
  • From: Robert Hancock
• Re: libata pm
  • From: dusty@xxxxxx
• [PATCH 2/2 v3] sata_mv: Support SoC controllers
  • From: saeed . bishara
• [PATCH 1/2 v3] sata_mv: Remove PCI dependency
  • From: saeed . bishara
• [2.6 patch] ide/ppc/pmac.c section fixes
  • From: Adrian Bunk
• [2.6 patch] ata_piix.c:piix_init_one() must be __devinit
  • From: Adrian Bunk
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Mark Lord
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Jeff Garzik
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Mark Lord
• Re: [PATCH 5/9] libata: implement and use SHT initializers and ops inheritance
  • From: Mark Lord
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Jeff Garzik
• Re: DMA mapping on SCSI device?
  • From: Mark Lord
• Re: DMA mapping on SCSI device?
  • From: Mark Lord
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Mark Lord
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Jeff Garzik
• GIT tree available
  • From: Tejun Heo
• Re: [PATCH 10/13] sata_mv ncq Introduce per-tag SG tables
  • From: Jeff Garzik
• How to verify sht-ops-conversion patch doesn't change anything
  • From: Tejun Heo
• [PATCH 5/9] libata: implement and use SHT initializers and ops inheritance
  • From: Tejun Heo
• [PATCH 9/9] libata: make reset related methods proper port operations
  • From: Tejun Heo
• [PATCH 6/9] make ata_pci_init_one() not use ops->irq_handler and pi->sht
  • From: Tejun Heo
• [PATCH 7/9] libata: stop overloading port_info->private_data
  • From: Tejun Heo
• [PATCH 8/9] libata: kill port_info->sht and ->irq_handler
  • From: Tejun Heo
• [PATCH 4/9] libata: normalize port_info, port_operations and sht tables
  • From: Tejun Heo
• [PATCH 1/9] libata: PCI device should be powered up before being accessed
  • From: Tejun Heo
• [PATCH 3/9] libata: implement and use ata_noop_irq_clear()
  • From: Tejun Heo
• [PATCH 2/9] libata: reorganize ata_port_operations
  • From: Tejun Heo
• [PATCHSET libata-dev#upstream] clean up scsi_host_templates and ata_port_operations
  • From: Tejun Heo
• [PATCH] pci: allow multiple calls to pcim_enable_device()
  • From: Tejun Heo
• [PATCH #upstream] libata: make EH fail gracefully if no reset method is available
  • From: Tejun Heo
• [PATCH 2/4] [libata] Blackfin pata-bf54x driver: Add debug information
  • From: Bryan Wu
• [PATCH 4/4] [libata] Blackfin pata-bf54x driver: fix compiling bug - no ata_port struct in struct ata_device any more
  • From: Bryan Wu
• [PATCH 1/4] [libata] Blackfin pata-bf54x driver: Remove obsolete PM function
  • From: Bryan Wu
• [PATCH 3/4] [libata] Blackfin pata-bf54x driver: should cover all possible interrupt sources
  • From: Bryan Wu
• [PATCH 0/4] [libata] Blackfin pata-bf54x driver updates
  • From: Bryan Wu
• Re: [PATCH] sata_nv: fix for completion handling
  • From: Robert Hancock
• Re: [PATCH] sata_nv: fix for completion handling
  • From: Tejun Heo
• Re: DMA mapping on SCSI device?
  • From: Robert Hancock
• [PATCH] sata_nv: fix for completion handling
  • From: Robert Hancock
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: rgheck
• Re: [PATCH 0/32] ide-tape redux v1
  • From: Bartlomiej Zolnierkiewicz
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: DMA mapping on SCSI device?
  • From: Luben Tuikov
• Re: DMA mapping on SCSI device?
  • From: Luben Tuikov
• Re: [Bugme-new] [Bug 9845] New: libata still broken for Pegasos on 2.6.24
  • From: Chuck Ebbert
• Re: [Bugme-new] [Bug 9845] New: libata still broken for Pegasos on 2.6.24
  • From: Andrew Morton
• ATA Problems: Back in the Land of the Unhappy Camper
  • From: rgheck
• Re: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Kelly Anderson
• Re: [PATCH 1/2 v2] sata_mv: Remove PCI dependency
  • From: saeed bishara
• Re: [PATCH 5/8] ide: always set DMA masks in ide_pci_setup_ports()
  • From: Sergei Shtylyov
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Re: Problem with ata layer in 2.6.24
  • From: Daniel Barkalow
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Alan Cox
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Sergei Shtylyov
• Re: Problem with ata layer in 2.6.24
  • From: rgheck
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: Daniel Barkalow
• Re: Problem with ata layer in 2.6.24
  • From: Daniel Barkalow
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• RE: [PATCH 2.6.24] ata_piix: IDE mode SATA patch for Intel ICH10 DeviceID's
  • From: Gaston, Jason D
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• [PATCH 1/2 v2] sata_mv: Remove PCI dependency
  • From: saeed . bishara
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Re: Problem with ata layer in 2.6.24
  • From: Daniel Barkalow
• Re: Problem with ata layer in 2.6.24
  • From: Jeff Garzik
• Re: Problem with ata layer in 2.6.24
  • From: rgheck
• Re: [PATCH 1/2] [libata] sata_mv: Remove PCI dependency
  • From: saeed bishara
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: [PATCH 2.6.24] ata_piix: IDE mode SATA patch for Intel ICH10 DeviceID's
  • From: Jeff Garzik
• Re: [PATCH 2.6.24] ahci: RAID mode SATA patch for Intel ICH10 DeviceID's
  • From: Jeff Garzik
• Re: [PATCH 1/2] [libata] sata_mv: Remove PCI dependency
  • From: Jeff Garzik
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Jeff Garzik
• Re: Problem with ata layer in 2.6.24
  • From: rgheck
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Jeff Garzik
• Re: Problem with ata layer in 2.6.24
  • From: rgheck
• Re: Problem with ata layer in 2.6.24
  • From: Mikael Pettersson
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: [PATCH 1/2] [libata] sata_mv: Remove PCI dependency
  • From: Jeff Garzik
• Re: [PATCH 1/2] [libata] sata_mv: Remove PCI dependency
  • From: Jeff Garzik
• Re: [PATCH 1/2] [libata] sata_mv: Remove PCI dependency
  • From: Mark Lord
• Re: Make_bad_sector
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Make_bad_sector
  • From: Greg Freemyer
• Re: DMA mapping on SCSI device?
  • From: James Bottomley
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Re: [PATCH 1/2] [libata] sata_mv: Remove PCI dependency
  • From: saeed bishara
• Re: Problem with ata layer in 2.6.24
  • From: Florian Attenberger
• Re: Problem with ata layer in 2.6.24
  • From: Michal Jaegermann
• Re: Problem with ata layer in 2.6.24
  • From: Kasper Sandberg
• RE: fixed a bug of adma in rhel4u5 with HDS7250SASUN500G.
  • From: Kuan Luo
• Re: [PATCH 0/32] ide-tape redux v1
  • From: Borislav Petkov
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Thomas Evans
• Re: DMA mapping on SCSI device?
  • From: Andi Kleen
• Re: Problem with ata layer in 2.6.24
  • From: Kasper Sandberg
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Tejun Heo
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Thomas Evans
• Re: DMA mapping on SCSI device?
  • From: Matthew Wilcox
• Re: DMA mapping on SCSI device?
  • From: Grant Grundler
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• RE: fixed a bug of adma in rhel4u5 with HDS7250SASUN500G.
  • From: Kuan Luo
• Re: Problem with ata layer in 2.6.24
  • From: Daniel Barkalow
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Daniel Barkalow
• [PATCH 2.6.24] ata_piix: IDE mode SATA patch for Intel ICH10 DeviceID's
  • From: Jason Gaston
• [PATCH 2.6.24] ahci: RAID mode SATA patch for Intel ICH10 DeviceID's
  • From: Jason Gaston
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• DMA mapping on SCSI device?
  • From: Robert Hancock
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: fixed a bug of adma in rhel4u5 with HDS7250SASUN500G.
  • From: Robert Hancock
• Re: Hot (un)plugging of a SATA drive with sata_nv (CK8S)?
  • From: Robert Hancock
• Re: [2.6 patch] ata_piix.c: make piix_merge_scr() static
  • From: Tejun Heo
• [2.6 patch] ata_piix.c: make piix_merge_scr() static
  • From: Adrian Bunk
• [2.6 patch] ide: make wait_drive_not_busy() static again
  • From: Adrian Bunk
• [2.6 patch] small ide-scan-pci.c cleanup
  • From: Adrian Bunk
• [2.6 patch] unexport ide_dma_on
  • From: Adrian Bunk
• Re: [Bugme-new] [Bug 9837] New: I can't boot with a PLEXTOR PX-740A
  • From: Andrew Morton
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: [PATCH 7/8] ide: add struct ide_port_info instances to legacy host drivers
  • From: Sergei Shtylyov
• Re: Problem with ata layer in 2.6.24
  • From: Daniel Barkalow
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Jeff Garzik
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: Richard Heck
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: Daniel Barkalow
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Zan Lynx
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Dave Neuer
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Calvin Walton
• Re: Marvel 88SE6121 driver
  • From: Mike Zheng
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• [PATCH] pata_legacy: multiple updates (rediff as asked)
  • From: Alan Cox
• [PATCH] pata_sl82c105: dual channel support
  • From: Alan Cox
• Re: [PATCH 0/32] ide-tape redux v1
  • From: Bartlomiej Zolnierkiewicz
• Re: Problem with ata layer in 2.6.24
  • From: Richard Heck
• Re: Marvel 88SE6121 driver
  • From: Sergei Shtylyov
• Marvel 88SE6121 driver
  • From: Mike Zheng
• Re: Problem with ata layer in 2.6.24
  • From: Mikael Pettersson
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: libata pm
  • From: Tejun Heo
• Re: libata pm
  • From: dusty@xxxxxx
• PROBLEM: SATA hotplugging not working with nForce MCP61
  • From: Tuomas Jormola
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Thomas Evans
• Re: [PATCH 1/5] libata: prefer hardreset
  • From: Tejun Heo
• Re: [PATCH 1/5] libata: prefer hardreset
  • From: Tejun Heo
• Re: libata pm
  • From: Tejun Heo
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Tejun Heo
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Thomas Evans
• Re: libata pm
  • From: dusty@xxxxxx
• Re: [PATCH 21/32] ide-tape: idetape_chrdev_direction_t:shorten enum names
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 22/32] ide-tape: struct idetape_packet_command_s: shorten member names
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 24/32] ide-tape: remove unreachable code chunk
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 10/32] ide-tape: remove struct idetape_read_position_result_t
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/32] ide-tape redux v1
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 25/32] ide-tape: simplify code branching in the interrupt handler
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 31/32] ide-tape: remove idetape_config_t typedef
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 29/32] ide-tape: remove mtio.h related comments
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 08/32] ide-tape: remove struct idetape_capabilities_page_t
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 07/32] ide-tape: refactor the debug logging facility
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/32] ide-tape: remove struct idetape_mode_parameter_header_t
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 06/32] ide-tape: remove IDETAPE_DEBUG_BUGS
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/32] ide-tape: remove struct idetape_request_sense_result_t
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/32] ide-tape: move historical changelog to Documentation/ide/ChangeLog.ide-tape.1995-2002
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.24 sata_sil Sil3114 drive clicking / restarting?
  • From: Andrew Paprocki
• Re: 2.6.24 sata_sil Sil3114 drive clicking / restarting?
  • From: Jim Paris
• 2.6.24 sata_sil Sil3114 drive clicking / restarting?
  • From: Andrew Paprocki
• Re: Linux 2.6.24 sata_promise SATA300TX4 problems
  • From: Peter Favrholdt
• Re: No DMA on a Dell Latitude D820 with >2.6.20
  • From: Mark Lord
• No DMA on a Dell Latitude D820 with >2.6.20
  • From: Mikel Olasagasti
• [PATCH] Use on-board instead of built-in in config options
  • From: Frans Pop
• Re: [PATCH 06/32] ide-tape: remove IDETAPE_DEBUG_BUGS
  • From: Borislav Petkov
• [PATCH 30/32] ide-tape: remove atomic test/set macros
  • From: Borislav Petkov
• [PATCH 32/32] ide-tape: cleanup the remaining codestyle issues
  • From: Borislav Petkov
• [PATCH 24/32] ide-tape: remove unreachable code chunk
  • From: Borislav Petkov
• [PATCH 22/32] ide-tape: struct idetape_packet_command_s: shorten member names
  • From: Borislav Petkov
• [PATCH 23/32] ide-tape: struct idetape_tape_t: shorten member names
  • From: Borislav Petkov
• [RFC PATCH 26/32] ide-tape: remove packet command and struct request memory buffers
  • From: Borislav Petkov
• [PATCH 27/32] ide-tape: remove idetape_increase_max_pipeline_stages()
  • From: Borislav Petkov
• [PATCH 28/32] ide-tape: shorten some function names
  • From: Borislav Petkov
• [PATCH 31/32] ide-tape: remove idetape_config_t typedef
  • From: Borislav Petkov
• [PATCH 25/32] ide-tape: simplify code branching in the interrupt handler
  • From: Borislav Petkov
• [PATCH 29/32] ide-tape: remove mtio.h related comments
  • From: Borislav Petkov
• [PATCH 20/32] ide-tape: make function name more accurate
  • From: Borislav Petkov
• [PATCH 16/32] ide-tape: use generic scsi commands
  • From: Borislav Petkov
• [PATCH 19/32] ide-tape: remove unused sense packet commands.
  • From: Borislav Petkov
• [PATCH 13/32] ide-tape: remove struct idetape_parameter_block_descriptor_t
  • From: Borislav Petkov
• [PATCH 21/32] ide-tape: idetape_chrdev_direction_t:shorten enum names
  • From: Borislav Petkov
• [PATCH 18/32] ide-tape: use generic byteorder macros
  • From: Borislav Petkov
• [PATCH 17/32] ide-tape: remove EXPERIMENTAL driver status
  • From: Borislav Petkov
• [PATCH 14/32] ide-tape: remove structs os_partition_t, os_dat_entry_t, os_dat_t
  • From: Borislav Petkov
• [PATCH 15/32] ide-tape: remove struct idetape_block_size_page_t
  • From: Borislav Petkov
• [PATCH 12/32] ide-tape: remove struct idetape_medium_partition_page_t
  • From: Borislav Petkov
• [PATCH 11/32] ide-tape: remove struct idetape_data_compression_page_t
  • From: Borislav Petkov
• [PATCH 07/32] ide-tape: refactor the debug logging facility
  • From: Borislav Petkov
• [PATCH 08/32] ide-tape: remove struct idetape_capabilities_page_t
  • From: Borislav Petkov
• [PATCH 09/32] ide-tape: remove struct idetape_inquiry_result_t
  • From: Borislav Petkov
• [PATCH 06/32] ide-tape: remove IDETAPE_DEBUG_BUGS
  • From: Borislav Petkov
• [PATCH 10/32] ide-tape: remove struct idetape_read_position_result_t
  • From: Borislav Petkov
• [PATCH 1/32] ide-tape: move historical changelog to Documentation/ide/ChangeLog.ide-tape.1995-2002
  • From: Borislav Petkov
• [PATCH 5/32] ide-tape: remove IDETAPE_DEBUG_INFO
  • From: Borislav Petkov
• [PATCH 3/32] ide-tape: remove struct idetape_request_sense_result_t
  • From: Borislav Petkov
• [PATCH 0/32] ide-tape redux v1
  • From: Borislav Petkov
• [PATCH 4/32] ide-tape: remove struct idetape_mode_parameter_header_t
  • From: Borislav Petkov
• [PATCH 2/32] ide-tape: remove dead code
  • From: Borislav Petkov
• Re: Linux 2.6.24 sata_promise SATA300TX4 problems
  • From: Mikael Pettersson
• Re: libata pm
  • From: dusty@xxxxxx
• Re: Linux 2.6.24 sata_promise SATA300TX4 problems
  • From: Peter Favrholdt
• Re: Linux 2.6.24 sata_promise SATA300TX4 problems
  • From: Mikael Pettersson
• [PATCH 13/13] sata_mv ncq Comments and version bump
  • From: Mark Lord
• Re: libata pm
  • From: Tejun Heo
• [PATCH 12/13] sata_mv ncq Remove post internal cmd op
  • From: Mark Lord
• [PATCH 11/13] sata_mv ncq Enable NCQ operation
  • From: Mark Lord
• [PATCH 10/13] sata_mv ncq Introduce per-tag SG tables
  • From: Mark Lord
• [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Mark Lord
• [PATCH 08/13] sata_mv ncq Restrict max sectors to 8-bits on GenII NCQ
  • From: Mark Lord
• [PATCH 07/13] sata_mv ncq Ignore response status LSB on NCQ
  • From: Mark Lord
• [PATCH 06/13] sata_mv ncq Use hqtag instead of ioid
  • From: Mark Lord
• [PATCH 05/13] sata_mv ncq Add want ncq parameter for EDMA configuration
  • From: Mark Lord
• [PATCH 04/13] sata_mv ncq Fix EDMA configuration
  • From: Mark Lord
• [PATCH 03/13] sata_mv ncq Rename base to port mmio
  • From: Mark Lord
• [PATCH 02/13] sata_mv ncq Mask transient IRQs
  • From: Mark Lord
• [PATCH 01/13] sata_mv ncq EH fixes
  • From: Mark Lord
• Re: From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> (linux.* mail to news gateway)
  • From: Bartlomiej Zolnierkiewicz
• Re: From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> (linux.* mail to news gateway)
  • From: Jan Engelhardt
• Re: From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> (linux.* mail to news gateway)
  • From: Frans Pop
• Re: [PATCH 10/14] sata_mv Use DMA memory pools for hardware memory tables
  • From: Mark Lord
• Re: libata pm
  • From: dusty@xxxxxx
• [git patches] IDE updates part #2
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 21/21] ide: make remaining built-in only IDE host drivers modular
  • From: Bartlomiej Zolnierkiewicz
• libata pm
  • From: dusty@xxxxxx
• Re: [PATCH 10/14] sata_mv Use DMA memory pools for hardware memory tables
  • From: Jeff Garzik
• Re: [PATCH 10/14] sata_mv Use DMA memory pools for hardware memory tables
  • From: Mark Lord
• Re: [PATCH 13/14] sata_mv No soft resets
  • From: Mark Lord
• Re: [PATCH 10/14] sata_mv Use DMA memory pools for hardware memory tables
  • From: Mark Lord
• Re: [PATCH 10/14] sata_mv Use DMA memory pools for hardware memory tables
  • From: Mark Lord
• Re: [PATCH 07/14] sata_mv Use hqtag instead of ioid
  • From: Mark Lord
• Re: [PATCH 05/14] sata_mv Fix EDMA configuration
  • From: Mark Lord
• Re: [PATCH 02/14] sata_mv Mask transient IRQs.
  • From: Mark Lord
• Linux 2.6.24 sata_promise SATA300TX4 problems
  • From: Peter Favrholdt
• Re: [PATCH 15/14] sata_mv NCQ support
  • From: Jeff Garzik
• Re: [PATCH 13/14] sata_mv No soft resets
  • From: Jeff Garzik
• Re: [PATCH 12/14] sata_mv Enable NCQ operation
  • From: Jeff Garzik
• Re: [PATCH 11/12] sata_mv Introduce per-tag SG tables
  • From: Jeff Garzik
• Re: [PATCH 10/14] sata_mv Use DMA memory pools for hardware memory tables
  • From: Jeff Garzik
• Re: [PATCH 09/14] sata_mv Restrict max_sectors to 8-bits on GenII NCQ
  • From: Jeff Garzik
• Re: [PATCH 07/14] sata_mv Use hqtag instead of ioid
  • From: Jeff Garzik
• Re: [PATCH 06/14] sata_mv Add want_ncq parameter for EDMA configuration
  • From: Jeff Garzik
• Re: [PATCH 05/14] sata_mv Fix EDMA configuration
  • From: Jeff Garzik
• Re: [PATCH 00/12] sata_mv NCQ support
  • From: Jeff Garzik
• Re: [PATCH 04/14] sata_mv rename base to port_mmio
  • From: Jeff Garzik
• Re: [PATCH 02/14] sata_mv Mask transient IRQs.
  • From: Jeff Garzik
• Re: [PATCH 01/14] sata_mv EH fixes
  • From: Jeff Garzik
• Re: ata error codes
  • From: Tejun Heo
• Re: Firmware on SATA PMP Sil3726 - Sil3124
  • From: Tejun Heo
• Re: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Tejun Heo
• Re: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Andrew Paprocki
• [git patches] libata updates
  • From: Jeff Garzik
• Re: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Jeff Garzik
• [git patches] IDE updates part #1
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-io: set REQ_FAILED when drive is dead
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/9] enable FSL SATA driver config for Freescale SoCs
  • From: Kumar Gala
• Re: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Konstantin A. Lepikhov
• re: [PATCH 14/14] sata_mv Comments and version bump (v.2)
  • From: Mark Lord
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Jay Estabrook
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Thomas Evans
• Re: [PATCH 4/9] enable FSL SATA driver config for Freescale SoCs
  • From: Kim Phillips
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Thomas Evans
• Re: WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
  • From: James Bottomley
• Re: WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
  • From: Mark Lord
• Re: WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
  • From: James Bottomley
• Firmware on SATA PMP Sil3726 - Sil3124
  • From: Lars Michael Jogbäck
• [PATCH] Palmchip BK3710 IDE driver
  • From: Anton Salnikov
• Re: ata error codes
  • From: Raz
• Re: WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
  • From: Jeff Garzik
• Re: WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
  • From: Jeff Garzik
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Thomas Evans
• Re: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Tejun Heo
• Re: WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
  • From: Tejun Heo
• Re: WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
  • From: Mark Lord
• Re: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Andrew Paprocki
• Re: WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
  • From: Tejun Heo
• Re: WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
  • From: Mark Lord
• Re: SATA timeouts on two disks
  • From: rgheck
• Re: AMD SB600 64 bit DMA issue
  • From: Tejun Heo
• Re: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Tejun Heo
• Re: [PATCH 15/14] sata_mv NCQ support
  • From: Tejun Heo
• Re: WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
  • From: Tejun Heo
• [PATCH 15/14] sata_mv NCQ support
  • From: Mark Lord
• Re: WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
  • From: Mark Lord
• Re: WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
  • From: Tejun Heo
• Re: excess timeouts accessing pci-sata card both ports
  • From: drtyc
• Re: WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
  • From: Mark Lord
• Re: WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
  • From: Tejun Heo
• Re: SATA timeouts on two disks
  • From: Tejun Heo
• Re: excess timeouts accessing pci-sata card both ports
  • From: drtyc
• Re: [PATCH 00/12] sata_mv NCQ support
  • From: Mark Lord
• [PATCH 14/14] sata_mv Comments and version bump
  • From: Mark Lord
• [PATCH 13/14] sata_mv No soft resets
  • From: Mark Lord
• [PATCH 12/14] sata_mv Enable NCQ operation
  • From: Mark Lord
• [PATCH 11/12] sata_mv Introduce per-tag SG tables
  • From: Mark Lord
• [PATCH 10/14] sata_mv Use DMA memory pools for hardware memory tables
  • From: Mark Lord
• [PATCH 09/14] sata_mv Restrict max_sectors to 8-bits on GenII NCQ
  • From: Mark Lord
• [PATCH 08/14] sata_mv Ignore response status LSB on NCQ
  • From: Mark Lord
• [PATCH 07/14] sata_mv Use hqtag instead of ioid
  • From: Mark Lord
• [PATCH 06/14] sata_mv Add want_ncq parameter for EDMA configuration
  • From: Mark Lord
• [PATCH 05/14] sata_mv Fix EDMA configuration
  • From: Mark Lord
• [PATCH 04/14] sata_mv rename base to port_mmio
  • From: Mark Lord
• [PATCH 03/14] sata_mv Clear queue indexes on chip restart
  • From: Mark Lord
• [PATCH 02/14] sata_mv Mask transient IRQs.
  • From: Mark Lord
• [PATCH 01/14] sata_mv EH fixes
  • From: Mark Lord
• [PATCH 00/12] sata_mv NCQ support
  • From: Mark Lord
• [PATCH] ide-io: set REQ_FAILED when drive is dead
  • From: Aristeu Rozanski
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Sergei Shtylyov
• Re: SATA timeouts on two disks
  • From: Jim MacBaine
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Tejun Heo
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Thomas Evans
• Re: WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
  • From: Mark Lord
• Re: WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
  • From: Tejun Heo
• WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
  • From: Mark Lord
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Tejun Heo
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Thomas Evans
• [PATCH] Palmchip BK3710 IDE driver
  • From: Anton Salnikov
• excess timeouts accessing pci-sata card both ports
  • From: drtyc
• RE: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Shane Huang
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Tejun Heo
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Thomas Evans
• RE: fixed a bug of adma in rhel4u5 with HDS7250SASUN500G.
  • From: Kuan Luo
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Tejun Heo
• Re: sata_nv and 2.6.24 (was Re: fixed a bug of adma in rhel4u5 with HDS7250SASUN500G.)
  • From: Robert Hancock
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Tejun Heo
• Re: sata_nv and 2.6.24 (was Re: fixed a bug of adma in rhel4u5 with HDS7250SASUN500G.)
  • From: Jeff Garzik
• Re: fixed a bug of adma in rhel4u5 with HDS7250SASUN500G.
  • From: Robert Hancock
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Thomas Evans
• [PATCH 2/5] libata: kill ATA_LFLAG_HRST_TO_RESUME
  • From: Tejun Heo
• [PATCH 5/5] libata: kill ata_ehi_schedule_probe()
  • From: Tejun Heo
• [PATCH 1/5] libata: prefer hardreset
  • From: Tejun Heo
• [PATCH 3/5] libata: kill ATA_EHI_RESUME_LINK
  • From: Tejun Heo
• [PATCH 4/5] libata: kill ATA_LFLAG_SKIP_D2H_BSY
  • From: Tejun Heo
• [PATCHSET libata-dev#upstream] libata: prefer hardreset
  • From: Tejun Heo
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Alan Cox
• Re: sata_nv and 2.6.24 (was Re: fixed a bug of adma in rhel4u5 with HDS7250SASUN500G.)
  • From: Robert Hancock
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Sergei Shtylyov
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Sergei Shtylyov
• Re: [PATCH] ppc: fix #ifdef-s in mediabay driver
  • From: Bartlomiej Zolnierkiewicz
• Re: SiI 3512 Serial ATA Controller - kernel 2.6.23
  • From: Dan Nica
• Re: [PATCH 1/3] libata: factor out ata_pci_activate_sff_host() from ata_pci_one()
  • From: Jeff Garzik
• sata_nv and 2.6.24 (was Re: fixed a bug of adma in rhel4u5 with HDS7250SASUN500G.)
  • From: Jeff Garzik
• About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Shane Huang
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Tejun Heo
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Thomas Evans
• Re: [PATCH] ppc: fix #ifdef-s in mediabay driver
  • From: Benjamin Herrenschmidt
• Re: [PATCH 1/2] [libata] sata_mv: Remove PCI dependency
  • From: Tejun Heo
• Re: [PATCH 1/2] [libata] sata_mv: Remove PCI dependency
  • From: Jeff Garzik
• Re: [PATCH] ppc: fix #ifdef-s in mediabay driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCHSET] printk: implement printk_header() and merging printk, take #2
  • From: Tejun Heo
• Re: [PATCH] ppc: fix #ifdef-s in mediabay driver
  • From: Benjamin Herrenschmidt
• Re: [PATCH rc8-mm1] hotfix libata-scsi corruption
  • From: Matt Mackall
• Re: [PATCHSET] printk: implement printk_header() and merging printk, take #2
  • From: Jan Engelhardt
• Re: [PATCHSET] printk: implement printk_header() and merging printk, take #2
  • From: Tejun Heo
• Re: [PATCHSET] printk: implement printk_header() and merging printk, take #2
  • From: Jan Engelhardt
• Re: SATA port multiplier(Sil 3132) and JMicron 361-363
  • From: Tejun Heo
• Re: [PATCH rc8-mm1] hotfix libata-scsi corruption
  • From: James Bottomley
• Re: [PATCH rc8-mm1] hotfix libata-scsi corruption
  • From: James Bottomley
• Re: [PATCH rc8-mm1] hotfix libata-scsi corruption
  • From: Hugh Dickins
• [PATCH] ppc: fix #ifdef-s in mediabay driver
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-cs: use ide_std_init_ports()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH rc8-mm1] hotfix libata-scsi corruption
  • From: Hugh Dickins
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Alan Cox
• Re: [PATCH rc8-mm1] hotfix libata-scsi corruption
  • From: Alan Cox
• Re: [PATCH rc8-mm1] hotfix libata-scsi corruption
  • From: James Bottomley
• Re: SiI 3512 Serial ATA Controller - kernel 2.6.23
  • From: Dan Nica
• Re: SiI 3512 Serial ATA Controller - kernel 2.6.23
  • From: Jeff Garzik
• Re: [PATCH rc8-mm1] hotfix libata-scsi corruption
  • From: Jeff Garzik
• Re: ATA device reset, shoud I be concerned?
  • From: Georgi Chulkov
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Sergei Shtylyov
• Re: [PATCH rc8-mm1] hotfix libata-scsi corruption
  • From: Hugh Dickins
• Re: [PATCH rc8-mm1] hotfix libata-scsi corruption
  • From: James Bottomley
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Jeff Garzik
• Re: [PATCH rc8-mm1] hotfix libata-scsi corruption
  • From: Hugh Dickins
• Re: [PATCH rc8-mm1] hotfix libata-scsi corruption
  • From: James Bottomley
• [PATCH rc8-mm1] hotfix libata-scsi corruption
  • From: Hugh Dickins
• Re: [PATCH 15/16] ide: remove ide_auto_reduce_xfer()
  • From: Sergei Shtylyov
• Re: [PATCH 14/16] ide: move drive->crc_count check out from check_dma_crc()
  • From: Sergei Shtylyov
• Re: [PATCH 13/16] ide: remove ide_ata66_check()
  • From: Sergei Shtylyov
• Re: [PATCH 11/16] ide: unexport SELECT_DRIVE()
  • From: Sergei Shtylyov
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Alan Cox
• Re: [PATCH 04/16] ide-cris: use ide_execute_command()
  • From: Sergei Shtylyov
• Re: [PATCH 03/16] trm290: use ide_execute_command()
  • From: Sergei Shtylyov
• Re: [PATCH 02/16] ide-scsi: use ide_execute_command()
  • From: Sergei Shtylyov
• Re: [PATCH 01/16] ide-tape: use ide_execute_command()
  • From: Sergei Shtylyov
• Re: [PATCH 12/16] ide: remove set_transfer()
  • From: Sergei Shtylyov
• Re: [PATCH 10/16] ide: use __ide_set_handler() in ide_execute_command()
  • From: Sergei Shtylyov
• Re: [PATCH 07/16] ide: convert ->straight8 field in ide_hwif_t to bit flag
  • From: Sergei Shtylyov
• Re: [PATCH 08/16] ide: remove ->nice0 and ->nice2 fields from ide_drive_t
  • From: Sergei Shtylyov
• Re: [PATCH 06/16] ide: remove unused ->auto_poll field from ide_hwif_t
  • From: Sergei Shtylyov
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Anton Salnikov
• Re: [PATCH 0/12] ide-floppy redux v2.5
  • From: Borislav Petkov
• Re: dvdrw->cdrom
  • From: Jake
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Tejun Heo
• Re: ATA device reset, shoud I be concerned?
  • From: Tejun Heo
• Re: ATA device reset, shoud I be concerned?
  • From: Alan Cox
• Re: ATA device reset, shoud I be concerned?
  • From: Tejun Heo
• Re: [PATCHSET] printk: implement printk_header() and merging printk
  • From: Matt Mackall
• Re: ATA device reset, shoud I be concerned?
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCHSET] printk: implement printk_header() and merging printk
  • From: Tejun Heo
• Re: ATA device reset, shoud I be concerned?
  • From: Tejun Heo
• [PATCH 16/16] ide: move check_dma_crc() to ide-dma.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 15/16] ide: remove ide_auto_reduce_xfer()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/16] ide: move drive->crc_count check out from check_dma_crc()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/16] ide: remove ide_ata66_check()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/16] ide: remove set_transfer()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/16] ide: unexport SELECT_DRIVE()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/16] ide: use __ide_set_handler() in ide_execute_command()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/16] ide: remove SATA_*_REG macros
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 08/16] ide: remove ->nice0 and ->nice2 fields from ide_drive_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 07/16] ide: convert ->straight8 field in ide_hwif_t to bit flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/16] ide: remove unused ->auto_poll field from ide_hwif_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/16] ide-probe: remove needless Status register reads
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/16] ide-cris: use ide_execute_command()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 03/16] trm290: use ide_execute_command()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 02/16] ide-scsi: use ide_execute_command()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 01/16] ide-tape: use ide_execute_command()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 00/16] ide: various fixes/cleanups
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] pdc2026x: remove surplus initialiser
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-disk: use do_rw_taskfile() (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] pdc2026x: remove surplus initialiser
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/12] ide-floppy redux v2.5
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCHSET] printk: implement printk_header() and merging printk
  • From: Matt Mackall
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Alan Cox
• [PATCH] Palmchip BK3710 IDE driver
  • From: Anton Salnikov
• Re: [PATCH] libata: add enclosure management support
  • From: James Bottomley
• Re: ATA device reset, shoud I be concerned?
  • From: Alan Cox
• Re: ATA device reset, shoud I be concerned?
  • From: Tejun Heo
• Re: ATA device reset, shoud I be concerned?
  • From: Alan Cox
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Thomas Evans
• Re: ATA device reset, shoud I be concerned?
  • From: Alan Cox
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Thomas Evans
• Re: ATA, SATA Disk Problems
  • From: rgheck
• Re: ATA, SATA Disk Problems
  • From: rgheck
• Re: unable to use cdrom/dvd drive after some usage
  • From: Tejun Heo
• Re: ATA device reset, shoud I be concerned?
  • From: Tejun Heo
• Re: ATA device reset, shoud I be concerned?
  • From: Tejun Heo
• Re: ATA device reset, shoud I be concerned?
  • From: Alan Cox
• Re: dvdrw->cdrom
  • From: Robert Hancock
• Re: ATA device reset, shoud I be concerned?
  • From: Tejun Heo
• Re: ATA device reset, shoud I be concerned?
  • From: Alan Cox
• Re: [PATCHSET] printk: implement printk_header() and merging printk, take #2
  • From: Tejun Heo
• Re: [PATCHSET] printk: implement printk_header() and merging printk, take #2
  • From: Matthew Wilcox
• Re: dvdrw->cdrom
  • From: Tejun Heo
• Re: dvdrw->cdrom
  • From: Jake
• Re: dvdrw->cdrom
  • From: Tejun Heo
• Re: SIlicon Image Controller 3512A or Seagate Barracuda ST3160827AS Issue
  • From: Tejun Heo
• Re: unable to use cdrom/dvd drive after some usage
  • From: Johnny Luong
• Re: ATA, SATA Disk Problems
  • From: Tejun Heo
• Re: ata error codes
  • From: Tejun Heo
• Re: unable to use cdrom/dvd drive after some usage
  • From: Tejun Heo
• Re: ATA device reset, shoud I be concerned?
  • From: Tejun Heo
• Re: SATA timeouts on two disks
  • From: Tejun Heo
• Re: SATA port multiplier(Sil 3132) and JMicron 361-363
  • From: Tejun Heo
• Re: SATA CDDVDRW and kernel 2.6.23.12 problems
  • From: Tejun Heo
• Re: [PATCH 1/2] [libata] sata_mv: Remove PCI dependency
  • From: Tejun Heo
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Tejun Heo
• [PATCH 5/5] libata: make libata use printk_header() and mprintk
  • From: Tejun Heo
• [PATCH 4/5] printk: add Documentation/printk.txt
  • From: Tejun Heo
• [PATCH 2/5] printk: implement [v]printk_header()
  • From: Tejun Heo
• [PATCH 3/5] printk: implement merging printk
  • From: Tejun Heo
• [PATCH 1/5] printk: keep log level on multiline messages
  • From: Tejun Heo
• [PATCHSET] printk: implement printk_header() and merging printk, take #2
  • From: Tejun Heo
• Re: The SX4 challenge
  • From: Mikael Pettersson
• Re: [PATCH 0/12] ide-floppy redux v2.5
  • From: Borislav Petkov
• SIlicon Image Controller 3512A or Seagate Barracuda ST3160827AS Issue
  • From: Tony Mugan
• Re: Sata 4726 Testing
  • From: Tejun Heo
• Re: Sata 4726 Testing
  • From: Andrew Ryder
• Re: [PATCH] pdc2026x: remove surplus initialiser
  • From: Alan Cox
• Re: SATA timeouts on two disks
  • From: Jim MacBaine
• Re: [PATCH] pdc2026x: remove surplus initialiser
  • From: Sergei Shtylyov
• Re: SATA timeouts on two disks
  • From: rgheck
• Re: SATA timeouts on two disks
  • From: Jim MacBaine
• [PATCH] pdc2026x: remove surplus initialiser
  • From: Alan Cox
• [PATCH] pata_winbond: error return
  • From: Alan Cox
• [PATCH] pata_serverworks: Fix cable types and cosmetics
  • From: Alan Cox
• [PATCH] pata_mpc52xx: remove un-needed assignment
  • From: Alan Cox
• pata_legacy: Merge winbond support
  • From: Alan Cox
• Re: [PATCH] libata: add enclosure management support
  • From: James Bottomley
• Re: [PATCH] libata: add enclosure management support
  • From: Kristen Carlson Accardi
• Re: [PATCH] libata: add enclosure management support
  • From: Kristen Carlson Accardi
• Re: [PATCH] libata: add enclosure management support
  • From: James Bottomley
• Re: [PATCH] libata: add enclosure management support
  • From: Kristen Carlson Accardi
• Re: [PATCH] libata: add enclosure management support
  • From: James Bottomley
• [PATCH RESEND] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: James Bottomley
• Re: [PATCHSET] printk: implement printk_header() and merging printk
  • From: Tejun Heo
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Bartlomiej Zolnierkiewicz
• libata makes SATA 40xDVDRW appear as 0xCDROM
  • From: kfc
• Re: [PATCHSET] printk: implement printk_header() and merging printk
  • From: Matt Mackall
• Re: [PATCHSET] printk: implement printk_header() and merging printk
  • From: Matthew Wilcox
• Re: [PATCHSET] printk: implement printk_header() and merging printk
  • From: Matt Mackall
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Sergei Shtylyov
• Re: [PATCH] Marvell 6440 SAS/SATA driver (draft)
  • From: James Bottomley
• Re: [PATCH] libata: add enclosure management support
  • From: Kristen Carlson Accardi
• Re: [PATCH] libata: add enclosure management support
  • From: James Bottomley
• Re: [PATCH] libata: add enclosure management support
  • From: Kristen Carlson Accardi
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Alan Cox
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Sergei Shtylyov
• Re: sata_mv oops on module removal
  • From: Tejun Heo
• Re: sata_mv oops on module removal
  • From: Tomasz Chmielewski
• Re: [PATCH #upstream] libata: fix off-by-one in error categorization
  • From: Tejun Heo
• Re: ahci: factor out AHCI enabling and enable AHCI before reading CAP
  • From: Tejun Heo
• [PATCH 3/3] ata_piix: implement SIDPR SCR access
  • From: Tejun Heo
• [PATCH 2/3] ata_piix: convert to prepare - activate initialization
  • From: Tejun Heo
• [PATCH 1/3] libata: factor out ata_pci_activate_sff_host() from ata_pci_one()
  • From: Tejun Heo
• [PATCHSET libata-dev#upstream] ata_piix: implement SIDPR SCR access, take #2
  • From: Tejun Heo
• Re: sata_mv oops on module removal
  • From: Tejun Heo
• Re: [PATCH] libata: add enclosure management support
  • From: Jeff Garzik
• Re: sata_mv oops on module removal
  • From: Mark Lord
• Re: [PATCH] libata: add enclosure management support
  • From: Kristen Carlson Accardi
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Alan Cox
• Re: Delkin Cardbus IDE, a.k.a. ASKA "Ninja" chipset
  • From: Alan Cox
• Re: [PATCH] libata: add enclosure management support
  • From: James Bottomley
• RE: Delkin Cardbus IDE, a.k.a. ASKA "Ninja" chipset
  • From: Iain Barker
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Sergei Shtylyov
• [PATCH] Palmchip BK3710 IDE driver
  • From: Anton Salnikov
• Re: sata_mv oops on module removal
  • From: Tomasz Chmielewski