Re: sata_mv oops on module removal

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tejun Heo schrieb:
Mark Lord wrote:
Tejun,

This Oops (2.6.23.13) looks very much like the same bug
you fixed recently for me in 2.6.24.

The bug was with sata_qstor and other drivers, in that
devres/libata were freeing the I/O resources before invoking
the LLD's host/port_stop routines .. which still need the I/O.

Did that patch get backported to 2.6.23 yet ?

No, it's not but yeah it probably should have.  Tomasz, can you please
test whether the attached patch fixes the problem?

No oops anymore - I get those in the log instead (below).

START_STOP FAILED doesn't sound very good, but perhaps it's normal?



# rmmod sata_mv
# dmesg
ata1.00: disabled
scst: Detached SCSI target mid-level from scsi1, channel 0, id 0, lun 0, type 0
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
sd 1:0:0:0: [sdb] Stopping disk
sd 1:0:0:0: [sdb] START_STOP FAILED
sd 1:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
ata2.00: disabled
scst: Detached SCSI target mid-level from scsi2, channel 0, id 0, lun 0, type 0
sd 2:0:0:0: [sdc] Synchronizing SCSI cache
sd 2:0:0:0: [sdc] Result: hostbyte=0x04 driverbyte=0x00
sd 2:0:0:0: [sdc] Stopping disk
sd 2:0:0:0: [sdc] START_STOP FAILED
sd 2:0:0:0: [sdc] Result: hostbyte=0x04 driverbyte=0x00
ata3.00: disabled
scst: Detached SCSI target mid-level from scsi3, channel 0, id 0, lun 0, type 0
sd 3:0:0:0: [sdd] Synchronizing SCSI cache
sd 3:0:0:0: [sdd] Result: hostbyte=0x04 driverbyte=0x00
sd 3:0:0:0: [sdd] Stopping disk
sd 3:0:0:0: [sdd] START_STOP FAILED
sd 3:0:0:0: [sdd] Result: hostbyte=0x04 driverbyte=0x00
ata4.00: disabled
scst: Detached SCSI target mid-level from scsi4, channel 0, id 0, lun 0, type 0
sd 4:0:0:0: [sde] Synchronizing SCSI cache
sd 4:0:0:0: [sde] Result: hostbyte=0x04 driverbyte=0x00
sd 4:0:0:0: [sde] Stopping disk
sd 4:0:0:0: [sde] START_STOP FAILED
sd 4:0:0:0: [sde] Result: hostbyte=0x04 driverbyte=0x00
ata5.00: disabled
scst: Detached SCSI target mid-level from scsi5, channel 0, id 0, lun 0, type 0
sd 5:0:0:0: [sdf] Synchronizing SCSI cache
sd 5:0:0:0: [sdf] Result: hostbyte=0x04 driverbyte=0x00
sd 5:0:0:0: [sdf] Stopping disk
sd 5:0:0:0: [sdf] START_STOP FAILED
sd 5:0:0:0: [sdf] Result: hostbyte=0x04 driverbyte=0x00
ACPI: PCI interrupt for device 0000:01:00.0 disabled



--
Tomasz Chmielewski
http://wpkg.org
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux