Linux IDE Archive

• Thread Index

• [Bug 14044] WARNING: at kernel/irq/manage.c:259
  • From: bugzilla-daemon
• [Bug 14044] WARNING: at kernel/irq/manage.c:259
  • From: bugzilla-daemon
• Re: Long delay when booting with SATA DVD on Marvell 88SE6121
  • From: Tejun Heo
• Re: MD/RAID time out writing superblock
  • From: Tejun Heo
• Re: MD/RAID time out writing superblock
  • From: Mark Lord
• Re: MD/RAID time out writing superblock
  • From: Ric Wheeler
• Re: MD/RAID time out writing superblock
  • From: Tejun Heo
• Re: [PATCH #upstream, v2] ahci: Implement SATA AHCI FIS-based switching support
  • From: Tejun Heo
• Re: 2.6.31-rc5 regression: hd don't show up
  • From: Tejun Heo
• Re: How to handle hotplug in case that host controller does not support hotplug via interrupt
  • From: Tejun Heo
• [Bug 14044] WARNING: at kernel/irq/manage.c:259
  • From: bugzilla-daemon
• [very-early-draft-unsplit PATCH] workqueue: implement global cpu workqueue
  • From: Tejun Heo
• Re: [PATCH 0/7] discard support revisited
  • From: Christoph Hellwig
• Re: [PATCH 0/7] discard support revisited
  • From: Matthew Wilcox
• Re: [PATCH 0/7] discard support revisited
  • From: James Bottomley
• Re: [PATCH 4/7] sd: add support for WRITE SAME (16) with unmap bit
  • From: Christoph Hellwig
• Re: [PATCH] ata_piix: parallel scanning on PATA needs an extra locking
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata_piix: parallel scanning on PATA needs an extra locking
  • From: Alan Cox
• [PATCH] ata_piix: parallel scanning on PATA needs an extra locking
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/7] sd: add support for WRITE SAME (16) with unmap bit
  • From: Sergei Shtylyov
• Re: [PATCH 0/7] discard support revisited
  • From: Matthew Wilcox
• Re: [PATCH 6/7] block: allow large discard requests
  • From: Christoph Hellwig
• Re: [PATCH 6/7] block: allow large discard requests
  • From: Mark Lord
• Re: [PATCH 6/7] block: allow large discard requests
  • From: Matthew Wilcox
• Re: [PATCH 6/7] block: allow large discard requests
  • From: Mark Lord
• Re: [PATCH 4/7] sd: add support for WRITE SAME (16) with unmap bit
  • From: Christoph Hellwig
• Re: [PATCH 4/7] sd: add support for WRITE SAME (16) with unmap bit
  • From: Douglas Gilbert
• Re: [PATCH 0/7] discard support revisited
  • From: Christoph Hellwig
• Re: [PATCH 4/7] sd: add support for WRITE SAME (16) with unmap bit
  • From: Christoph Hellwig
• Re: [PATCH 4/7] sd: add support for WRITE SAME (16) with unmap bit
  • From: Douglas Gilbert
• Re: [PATCH 0/7] discard support revisited
  • From: Matthew Wilcox
• [PATCH 7/7] xfs: add batches discard support
  • From: Christoph Hellwig
• [PATCH 6/7] block: allow large discard requests
  • From: Christoph Hellwig
• [PATCH 5/7] libata: Add support for TRIM
  • From: Christoph Hellwig
• [PATCH 3/7] block: discard may need to allocate pages
  • From: Christoph Hellwig
• [PATCH 1/7] Make DISCARD_BARRIER and DISCARD_NOBARRIER writes instead of reads
  • From: Christoph Hellwig
• [PATCH 2/7] block: use blkdev_issue_discard in blk_ioctl_discard
  • From: Christoph Hellwig
• [PATCH 4/7] sd: add support for WRITE SAME (16) with unmap bit
  • From: Christoph Hellwig
• [PATCH 0/7] discard support revisited
  • From: Christoph Hellwig
• Re: CF to SATA bridge support
  • From: Mark Lord
• Re: CF to SATA bridge support
  • From: Mark Lord
• Re: CF to SATA bridge support
  • From: Mark Lord
• Re: CF to SATA bridge support
  • From: Mark Lord
• Re: CF to SATA bridge support
  • From: Mark Lord
• Re: [PATCH #upstream] libata: enhance command parsing
  • From: Robert Hancock
• Re: 2.6.31-rc5 regression: hd don't show up
  • From: Tim Blechmann
• Re: [PATCH 0/3] Convert libata pio task to slow-work
  • From: Jens Axboe
• Re: [PATCH 0/3] Convert libata pio task to slow-work
  • From: Tejun Heo
• Re: MD/RAID time out writing superblock
  • From: Ric Wheeler
• Re: [PATCH 0/3] Convert libata pio task to slow-work
  • From: Jens Axboe
• Re: Ubuntu 9.04 (2.6.28-14) and eSATA Port Multiplier (PMP) Not working
  • From: Grant Grundler
• Re: aic94xx and the adaptec sata raid controller (aic-9410)
  • From: Kurt Newman
• Re: [PATCH 0/3] Convert libata pio task to slow-work
  • From: Tejun Heo
• Re: [PATCH 0/3] Convert libata pio task to slow-work
  • From: Jens Axboe
• Re: [PATCH 0/3] Convert libata pio task to slow-work
  • From: Tejun Heo
• Re: 2.6.31-rc5 regression: hd don't show up
  • From: Tejun Heo
• Re: 2.6.31-rc5 regression: hd don't show up
  • From: Tim Blechmann
• [PATCH 2/3] slow-work: add support for cancellation of slow work (updated)
  • From: Jens Axboe
• Re: [PATCH 2/3] slow-work: add support for cancellation of slow work
  • From: Jens Axboe
• [PATCH 3/3] libata: switch pio task from workqueue to slow-work
  • From: Jens Axboe
• [PATCH 1/3] slow-work: add delayed_slow_work support
  • From: Jens Axboe
• [PATCH 2/3] slow-work: add support for cancellation of slow work
  • From: Jens Axboe
• [PATCH 0/3] Convert libata pio task to slow-work
  • From: Jens Axboe
• Re: 2.6.31-rc5 regression: hd don't show up
  • From: Tejun Heo
• Re: ATA device reset, shoud I be concerned?
  • From: Alan Cox
• Re: Ubuntu 9.04 (2.6.28-14) and eSATA Port Multiplier (PMP) Not working
  • From: Tejun Heo
• Re: ATA device reset, shoud I be concerned?
  • From: Jeff Garzik
• Re: ATA device reset, shoud I be concerned?
  • From: Robert Hancock
• Re: aic94xx and the adaptec sata raid controller (aic-9410)
  • From: Robert Hancock
• Re: MD/RAID: what's wrong with sector 1953519935?
  • From: Robert Hancock
• RE: MD/RAID: what's wrong with sector 1953519935?
  • From: Andrei Tanas
• Re: MD/RAID: what's wrong with sector 1953519935?
  • From: Mark Lord
• Re: LSISAS1068E + WDC WD2002FYPS: I/O error & Sense Key
  • From: Allan Wind
• Re: aic94xx and the adaptec sata raid controller (aic-9410)
  • From: Kurt Newman
• Re: aic94xx and the adaptec sata raid controller (aic-9410)
  • From: James Bottomley
• Re: MD/RAID: what's wrong with sector 1953519935?
  • From: Andrei Tanas
• [Bugme-new] [Bug 13988] New: Oops and NULL pointer with USB disk
  • From: Joachim
• aic94xx and the adaptec sata raid controller (aic-9410)
  • From: Kurt Newman
• Re: sata_promise: Keeps saying SATA link down (SStatus 0 SControl 0)
  • From: Kurt Roeckx
• Re: Ubuntu 9.04 (2.6.28-14) and eSATA Port Multiplier (PMP) Not working
  • From: Mark Lord
• Re: Ubuntu 9.04 (2.6.28-14) and eSATA Port Multiplier (PMP) Not working
  • From: Grant Grundler
• Re: Sun Blade 100 - boot issue
  • From: David Miller
• Re: Sun Blade 100 - boot issue
  • From: Jurij Smakov
• Re: Sun Blade 100 - boot issue
  • From: Alan Cox
• Re: Sun Blade 100 - boot issue
  • From: Josip Rodin
• Re: 2.6.31-rc6: ACPI handle has no context apparenty from libata during suspend to RAM
  • From: Rafael J. Wysocki
• [PATCH resend] ide: use printk_once
  • From: Marcin Slusarz
• [PATCH resend] ata: use printk_once
  • From: Marcin Slusarz
• Re: 2.6.31-rc6: ACPI handle has no context apparenty from libata during suspend to RAM
  • From: Frans Pop
• Re: 2.6.31-rc6: ACPI handle has no context apparenty from libata during suspend to RAM
  • From: Andreas Mohr
• 2.6.31-rc6: ACPI handle has no context apparenty from libata during suspend to RAM
  • From: Andrey Borzenkov
• Re: [PATCH #upstream] sata_sil24: always set protocol override for non-ATAPI data commands
  • From: Robert Hancock
• Re: [PATCH #upstream] sata_sil24: always set protocol override for non-ATAPI data commands
  • From: Robert Hancock
• Re: libata: waiting for the drives to settle
  • From: Jeff Garzik
• Re: [PATCH #upstream] sata_sil24: always set protocol override for non-ATAPI data commands
  • From: Jeff Garzik
• Re: [PATCH #upstream] sata_sil24: always set protocol override for non-ATAPI data commands
  • From: Jeff Garzik
• Re: [PATCH #upstream] sata_sil24: always set protocol override for non-ATAPI data commands
  • From: Mark Lord
• Re: [PATCH #upstream] sata_sil24: always set protocol override for non-ATAPI data commands
  • From: Mark Lord
• Re: [PATCH #upstream] sata_sil24: always set protocol override for non-ATAPI data commands
  • From: Jeff Garzik
• Re: [PATCH #upstream] sata_sil24: always set protocol override for non-ATAPI data commands
  • From: Mark Lord
• Re: [PATCH #upstream] libata: enhance command parsing
  • From: Mark Lord
• Re: [PATCH #upstream] sata_sil24: always set protocol override for non-ATAPI data commands
  • From: Robert Hancock
• Re: [PATCH #upstream] libata: enhance command parsing
  • From: Robert Hancock
• Re[2]: libata: waiting for the drives to settle
  • From: Andrei Martynov
• Re: [PATCH, RFC] xfs: batched discard support
  • From: Greg Freemyer
• Re: [PATCH, RFC] xfs: batched discard support
  • From: Ric Wheeler
• Re: libata: waiting for the drives to settle
  • From: Jeff Garzik
• Re: [PATCH, RFC] xfs: batched discard support
  • From: Rolf Eike Beer
• Re: [PATCH, RFC] xfs: batched discard support
  • From: Douglas Gilbert
• Re: [PATCH, RFC] xfs: batched discard support
  • From: Ric Wheeler
• Re: [PATCH, RFC] xfs: batched discard support
  • From: James Bottomley
• Re: [PATCH, RFC] xfs: batched discard support
  • From: Mark Lord
• Re: [PATCH] libata: use single threaded work queue
  • From: James Bottomley
• Re: [PATCH, RFC] xfs: batched discard support
  • From: Ric Wheeler
• Re: [PATCH] libata: use single threaded work queue
  • From: Tejun Heo
• Re: [PATCH] libata: use single threaded work queue
  • From: Tejun Heo
• Re: [PATCH] libata: use single threaded work queue
  • From: Tejun Heo
• Re: [PATCH] libata: use single threaded work queue
  • From: Stefan Richter
• Re: [PATCH] libata: use single threaded work queue
  • From: Stefan Richter
• libata: waiting for the drives to settle
  • From: Andrei Martynov
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• Re: [PATCH, RFC] xfs: batched discard support
  • From: Mark Lord
• Re: [PATCH] libata: use single threaded work queue
  • From: Benjamin Herrenschmidt
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• Re: [PATCH] libata: use single threaded work queue
  • From: Alan Cox
• Re: [PATCH] libata: use single threaded work queue
  • From: Tejun Heo
• Re: [PATCH] libata: use single threaded work queue
  • From: Alan Cox
• Re: [PATCH] libata: use single threaded work queue
  • From: Tejun Heo
• Re: [PATCH] libata: use single threaded work queue
  • From: Alan Cox
• Re: [PATCH] libata: use single threaded work queue
  • From: Tejun Heo
• Re: [PATCH] libata: use single threaded work queue
  • From: Jeff Garzik
• Re: [PATCH] libata: use single threaded work queue
  • From: Jeff Garzik
• Re: [PATCH] libata: use single threaded work queue
  • From: Jens Axboe
• Re: [PATCH] libata: use single threaded work queue
  • From: Mark Lord
• Re: [PATCH] libata: use single threaded work queue
  • From: Jens Axboe
• Re: [PATCH] libata: use single threaded work queue
  • From: Jeff Garzik
• [PATCH] libata: use single threaded work queue
  • From: Jens Axboe
• Re: [Bugme-new] [Bug 13988] New: Oops and NULL pointer with USB disk
  • From: Andrew Morton
• Re: Ubuntu 9.04 (2.6.28-14) and eSATA Port Multiplier (PMP) Not working
  • From: Chris K
• [PATCH #upstream, v2] ahci: Implement SATA AHCI FIS-based switching support
  • From: Shane Huang
• Re: Ubuntu 9.04 (2.6.28-14) and eSATA Port Multiplier (PMP) Not working
  • From: Grant Grundler
• Re: Ubuntu 9.04 (2.6.28-14) and eSATA Port Multiplier (PMP) Not working
  • From: Chris K
• Re: Ubuntu 9.04 (2.6.28-14) and eSATA Port Multiplier (PMP) Not working
  • From: Grant Grundler
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: James Bottomley
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Mark Lord
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Mark Lord
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: James Bottomley
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: James Bottomley
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Christoph Hellwig
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Greg Freemyer
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Ric Wheeler
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: jim owens
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: James Bottomley
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Bill Davidsen
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Greg Freemyer
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: jim owens
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Bill Davidsen
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Bill Davidsen
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Matthew Wilcox
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: James Bottomley
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Douglas Gilbert
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Mark Lord
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Mark Lord
• Long delay when booting with SATA DVD on Marvell 88SE6121
  • From: Mike Hokenson
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: John Robinson
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Chris Worley
• Re: Discard support
  • From: Mark Lord
• Re: Discard support
  • From: Theodore Tso
• Re: Discard support
  • From: Jeff Garzik
• Re: Discard support
  • From: Roland Dreier
• Re: sata AHCI controller over non-PCI bus
  • From: Jeff Garzik
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Alan Cox
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: James Bottomley
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Mark Lord
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: James Bottomley
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Mark Lord
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Mark Lord
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Robert Hancock
• Re: sata AHCI controller over non-PCI bus
  • From: Robert Hancock
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Christoph Hellwig
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Mark Lord
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: James Bottomley
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Theodore Tso
• Re: sata AHCI controller over non-PCI bus
  • From: James Bottomley
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Arjan van de Ven
• RE: sata AHCI controller over non-PCI bus
  • From: Subbrathnam, Swaminathan
• Re: [PATCH, RFC] xfs: batched discard support
  • From: Mark Lord
• Re: [PATCH, RFC] xfs: batched discard support
  • From: Christoph Hellwig
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Mark Lord
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Alan Cox
• Re: [PATCH, RFC] xfs: batched discard support
  • From: Mark Lord
• Re: [PATCH, RFC] xfs: batched discard support
  • From: Mark Lord
• Re: sata AHCI controller over non-PCI bus
  • From: Jeff Garzik
• [PATCH #upstream-fixes] libata: fix off-by-one error in ata_tf_read_block()
  • From: Tejun Heo
• Re: [PATCH 1/4] dmi: fix date handling in dmi_get_year()
  • From: Jeff Garzik
• Re: [PATCH] Fix for broken SB600 64 bit DMA issue - generic way
  • From: Tejun Heo
• [PATCH 4/4 #upstream] ahci: Gigabyte GA-MA69VM-S2 can't do 64bit DMA
  • From: Tejun Heo
• [PATCH 3/4 #upstream] ahci: make ahci_asus_m2a_vm_32bit_only() quirk more generic
  • From: Tejun Heo
• [PATCH 3/4 #upstream] ahci: make ahci_asus_m2a_vm_32bit_only() quirk more generic
  • From: Tejun Heo
• [PATCH 2/4] dmi: extend dmi_get_year() to dmi_get_date()
  • From: Tejun Heo
• [PATCH 1/4] dmi: fix date handling in dmi_get_year()
  • From: Tejun Heo
• Re: 2.6.31-rc5 regression: hd don't show up
  • From: Tim Blechmann
• Re: ata_tf_read_block() question
  • From: Atsushi Nemoto
• Re: 2.6.31-rc5 regression: hd don't show up
  • From: Tejun Heo
• Re: ata_tf_read_block() question
  • From: Tejun Heo
• Re: [PATCH] at91_ide: remove headers specific for at91sam9263
  • From: David Miller
• Re: [PATCH] libata: Export AHCI capabilities
  • From: Jeff Garzik
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: jim owens
• Re: [PATCH] at91_ide: remove headers specific for at91sam9263
  • From: Stanislaw Gruszka
• ata_tf_read_block() question
  • From: Atsushi Nemoto
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: James Bottomley
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Mark Lord
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Mark Lord
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Mark Lord
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: James Bottomley
• [PATCH] at91_ide: remove headers specific for at91sam9263
  • From: Sergey Matyukevich
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• Re: [PATCH 9/10] drivers/ata: introduce missing kfree
  • From: Sergey Matyukevich
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Greg Freemyer
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Chris Worley
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Greg Freemyer
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Chris Worley
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Matthew Wilcox
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Chris Worley
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Greg Freemyer
• Re: Discard support
  • From: Greg Freemyer
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Mark Lord
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Mark Lord
• Re: Discard support
  • From: Roland Dreier
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Greg Freemyer
• Re: Ubuntu 9.04 (2.6.28-14) and eSATA Port Multiplier (PMP) Not working
  • From: Chris K
• Re: Marvell 6121 AHCI: hotplug not reliable?
  • From: Mourad De Clerck
• Re: [PATCH] pcmcia: add CNF-CDROM-ID for ide
  • From: David Miller
• [PATCH] Fix for broken SB600 64 bit DMA issue - generic way
  • From: Sandor Bodo-Merle
• Re: 2.6.31-rc5 regression: hd don't show up
  • From: Tim Blechmann
• Re: Marvell 6121 AHCI: hotplug not reliable?
  • From: Tejun Heo
• Re: 2.6.31-rc5 regression: hd don't show up
  • From: Tejun Heo
• Re: Ubuntu 9.04 (2.6.28-14) and eSATA Port Multiplier (PMP) Not working
  • From: Tejun Heo
• 2.6.31-rc5 regression: hd don't show up
  • From: Tim Blechmann
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Greg Freemyer
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Richard Sharpe
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Greg Freemyer
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Bryan Donlan
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: david
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Richard Sharpe
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: James Bottomley
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Ric Wheeler
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Greg Freemyer
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Douglas Gilbert
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Hugh Dickins
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: david
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Markus Trippelsdorf
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Nitin Gupta
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: James Bottomley
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Matthew Wilcox
• Re: Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: david
• Discard support (was Re: [PATCH] swap: send callback when swap slot is freed)
  • From: Matthew Wilcox
• Re: Marvell 6121 AHCI: hotplug not reliable?
  • From: Mourad De Clerck
• Re: Marvell 6121 AHCI: hotplug not reliable?
  • From: Jeff Garzik
• Marvell 6121 AHCI: hotplug not reliable?
  • From: Mourad De Clerck
• Re: Ubuntu 9.04 (2.6.28-14) and eSATA Port Multiplier (PMP) Not working
  • From: Chris K
• Re: [PATCH 2.6.32 v3] Conditional MSI support for sata_nv
  • From: Tony Vroon
• Re: [PATCH 2.6.32 v3] Conditional MSI support for sata_nv
  • From: Leon Woestenberg
• Re: Can we get "applied" top posted?
  • From: Greg Freemyer
• Re: Can we get "applied" top posted?
  • From: Jeff Garzik
• Can we get "applied" top posted?
  • From: Greg Freemyer
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] ahci: add workaround for on-board 5723s on some gigabyte boards
  • From: Jeff Garzik
• Re: [PATCH] pata_atiixp: fix slave device support
  • From: Jeff Garzik
• Re: [PATCH] Soften up the dmesg on SB600 PMP softreset failure recovery
  • From: Jeff Garzik
• Re: [PATCH 2.6.32 v3] Conditional MSI support for sata_nv
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: OCZ Vertex can't do HPA
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] pata_at91: fix resource release
  • From: Jeff Garzik
• frequent head unloads
  • From: Mike Sumner
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Alan Cox
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Jim Duda
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Borislav Petkov
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Jim Duda
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Jim Duda
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Jim Paris
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Jim Duda
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Alan Cox
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Jim Duda
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Alan Cox
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Alan Cox
• Re: [PATCH 1/3] SCSI: Allow platform-specific code to be run against the SCSI tree
  • From: Matthew Garrett
• Re: [PATCH 1/3] SCSI: Allow platform-specific code to be run against the SCSI tree
  • From: James Bottomley
• Re: [PATCH 1/3] SCSI: Allow platform-specific code to be run against the SCSI tree
  • From: Matthew Garrett
• Re: [PATCH 1/3] SCSI: Allow platform-specific code to be run against the SCSI tree
  • From: James Bottomley
• Re: [PATCH 1/3] SCSI: Allow platform-specific code to be run against the SCSI tree
  • From: Matthew Garrett
• Re: [PATCH] libata: Export AHCI capabilities
  • From: Matthew Garrett
• Re: CF to SATA bridge support
  • From: Mark Lord
• RE: sata AHCI controller over non-PCI bus
  • From: Subbrathnam, Swaminathan
• Re: sata AHCI controller over non-PCI bus
  • From: Sergei Shtylyov
• Re: sata AHCI controller over non-PCI bus
  • From: Sergei Shtylyov
• sata AHCI controller over non-PCI bus
  • From: Subbrathnam, Swaminathan
• Re: [PATCH 09/14] ide: use printk_once
  • From: David Miller
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Jim Duda
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Jim Duda
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Jim Duda
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Jim Duda
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Bartlomiej Zolnierkiewicz
• Re: Drive tester
  • From: Gwendal Grignou
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Alan Cox
• Re: SATA errors
  • From: Mikael Pettersson
• Re: SATA errors
  • From: Miah Gregory
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Jim Duda
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Alan Cox
• Re: SATA errors
  • From: Mikael Pettersson
• [PATCH 09/14] ide: use printk_once
  • From: Marcin Slusarz
• [PATCH 06/14] ata: use printk_once
  • From: Marcin Slusarz
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Jim Duda
• Re: SATA errors
  • From: Robert Hancock
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Alan Cox
• Re: CF to SATA bridge support
  • From: Mathieu GELI
• SATA errors
  • From: Miah Gregory
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Borislav Petkov
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Jim Duda
• Re: 2.6.31-rc1 with ide-tape / STT2000A
  • From: Robert Hancock
• 2.6.31-rc1 with ide-tape / STT2000A
  • From: Jim Duda
• Re: CF to SATA bridge support
  • From: Mathieu GELI
• Re: IDE -next tree
  • From: Stephen Rothwell
• Re: IDE -next tree
  • From: David Miller
• Re: ahci sometimes fails to suspend controller
  • From: Benjamin S.
• Re: IDE -next tree
  • From: Stephen Rothwell
• IDE -next tree
  • From: David Miller
• Re: CF to SATA bridge support
  • From: Robert Hancock
• Re: [PATCH] When a disk wakes up from sleep, ensure that the command is retried by SCSI EH.
  • From: Tejun Heo
• [PATCH] When a disk wakes up from sleep, ensure that the command is retried by SCSI EH.
  • From: Gwendal Grignou
• Re: [PATCH] When a disk needs to be waken up from sleep, ensure that the command is retried by SCSI EH.
  • From: Tejun Heo
• [PATCH] When a disk needs to be waken up from sleep, ensure that the command is retried by SCSI EH.
  • From: Gwendal Grignou
• Re: [PATCH] When a disk needs to be waken up from sleep, ensure that the command is retried by SCSI EH.
  • From: Tejun Heo
• [PATCH] When a disk needs to be waken up from sleep, ensure that the command is retried by SCSI EH.
  • From: Gwendal Grignou
• Re: [PATCH] When a disk needs to be waken up from sleep, ensure that the command is retried by SCSI EH.
  • From: Gwendal Grignou
• Re: [patch 4/6] ide: allow ide_dev_read_id() to be called from the IRQ context
  • From: Bartlomiej Zolnierkiewicz
• Re: [patch 4/6] ide: allow ide_dev_read_id() to be called from the IRQ context
  • From: David Miller
• CF to SATA bridge support
  • From: Mathieu GELI
• Re: [patch 4/6] ide: allow ide_dev_read_id() to be called from the IRQ context
  • From: Bartlomiej Zolnierkiewicz
• Re: [patch 4/6] ide: allow ide_dev_read_id() to be called from the IRQ context
  • From: David Miller
• Re: [patch 4/6] ide: allow ide_dev_read_id() to be called from the IRQ context
  • From: Bartlomiej Zolnierkiewicz
• Re: [patch 4/6] ide: allow ide_dev_read_id() to be called from the IRQ context
  • From: David Miller
• Re: [patch 4/6] ide: allow ide_dev_read_id() to be called from the IRQ context
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] pcmcia: add CNF-CDROM-ID for ide
  • From: Wolfram Sang
• Re: ahci sometimes fails to suspend controller
  • From: Benjamin S.
• Re: [PATCH] When a disk needs to be waken up from sleep, ensure that the command is retried by SCSI EH.
  • From: Tejun Heo
• RE: [PATCH] kill @force_restart and refine CLO for ahci_kick_engine()
  • From: Huang, Shane
• Re: [PATCH] kill @force_restart and refine CLO for ahci_kick_engine()
  • From: Tejun Heo
• [PATCH] kill @force_restart and refine CLO for ahci_kick_engine()
  • From: Shane Huang
• [PATCH #upstream-fixes] pata_at91: fix resource release
  • From: Tejun Heo
• Re: [PATCH 2.6.32 v2] MCP55 SATA2 conditional MSI support for sata_nv
  • From: Tony Vroon
• Re: [PATCH 2.6.32 v2] MCP55 SATA2 conditional MSI support for sata_nv
  • From: Tejun Heo
• Re: [PATCH 2.6.32 v2] MCP55 SATA2 conditional MSI support for sata_nv
  • From: Robert Hancock
• [patch 2/2] drivers/ata: introduce missing kfree
  • From: akpm
• [patch 1/2] drivers/ata: use resource_size
  • From: akpm
• Re: [PATCH] pcmcia: add CNF-CDROM-ID for ide/pata
  • From: David Miller
• Re: [PATCH] When a disk needs to be waken up from sleep, ensure that the command is retried by SCSI EH.
  • From: Gwendal Grignou
• [PATCH] When a disk needs to be waken up from sleep, ensure that the command is retried by SCSI EH.
  • From: Gwendal Grignou
• [PATCH #upstream-fixes] libata: OCZ Vertex can't do HPA
  • From: Tejun Heo
• RE: [PATCH 2.6.32 v2] MCP55 SATA2 conditional MSI support for sata_nv
  • From: Chetan . Loke
• RE: [PATCH 2.6.32 v2] MCP55 SATA2 conditional MSI support for sata_nv
  • From: Tony Vroon
• Re: [PATCH] pata_atiixp: fix slave device support
  • From: Bartlomiej Zolnierkiewicz
• RE: [PATCH 2.6.32 v2] MCP55 SATA2 conditional MSI support for sata_nv
  • From: Chetan . Loke
• [PATCH] pata_atiixp: fix slave device support
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] libata: Bind the Linux device tree to the ACPI device tree
  • From: Matthew Garrett
• Re: [PATCH] pcmcia: add CNF-CDROM-ID for ide/pata
  • From: Wolfram Sang
• [Bug 13921] No CD-ROM ATAPI driver on kernels higher than 2.6.24.x
  • From: bugzilla-daemon
• [Bug 13921] No CD-ROM ATAPI driver on kernels higher than 2.6.24.x
  • From: bugzilla-daemon
• [Bug 13921] No CD-ROM ATAPI driver on kernels higher than 2.6.24.x
  • From: bugzilla-daemon
• [Bug 13921] No CD-ROM ATAPI driver on kernels higher than 2.6.24.x
  • From: bugzilla-daemon
• Re: [PATCH 2/3] libata: Bind the Linux device tree to the ACPI device tree
  • From: Håkon Løvdal
• [Bug 13921] No CD-ROM ATAPI driver on kernels higher than 2.6.24.x
  • From: bugzilla-daemon
• [Bug 13921] No CD-ROM ATAPI driver on kernels higher than 2.6.24.x
  • From: bugzilla-daemon
• [Bug 13921] No CD-ROM ATAPI driver on kernels higher than 2.6.24.x
  • From: bugzilla-daemon
• [PATCH 2.6.32 v3] Conditional MSI support for sata_nv
  • From: Tony Vroon
• [Bug 13921] No CD-ROM ATAPI driver on kernels higher than 2.6.24.x
  • From: bugzilla-daemon
• Re: [PATCH 2.6.32] MCP5x conditional MSI support for sata_nv
  • From: Robert Hancock
• Re: [PATCH 2.6.32 v2] MCP55 SATA2 conditional MSI support for sata_nv
  • From: Robert Hancock
• Re: HighPoint RocketRAID 2320
  • From: Mark Lord
• Re: HighPoint RocketRAID 2320
  • From: Mark Lord
• Re: HighPoint RocketRAID 2320
  • From: Mark Lord
• Re: HighPoint RocketRAID 2320
  • From: Davíð Steinn Geirsson
• Re: [stable] cmd64x: irq 14: nobody cared - system is dreadfully slow
  • From: Greg KH
• [Bug 13921] No CD-ROM ATAPI driver on kernels higher than 2.6.24.x
  • From: bugzilla-daemon
• [PATCH 2.6.32 v2] MCP55 SATA2 conditional MSI support for sata_nv
  • From: Tony Vroon
• [Bug 13921] No CD-ROM ATAPI driver on kernels higher than 2.6.24.x
  • From: bugzilla-daemon
• Re: Adding new pci vendor id
  • From: Grant Grundler
• RE: Adding new pci vendor id
  • From: Tauseef Hussain
• Re: HighPoint RocketRAID 2320
  • From: Tejun Heo
• Re: HighPoint RocketRAID 2320
  • From: Mark Lord
• Re: HighPoint RocketRAID 2320
  • From: Mark Lord
• Re: [PATCH 2.6.32] MCP5x conditional MSI support for sata_nv
  • From: Philip Langdale
• Re: [PATCH] Soften up the dmesg on SB600 PMP softreset failure recovery
  • From: Tejun Heo
• [PATCH] Soften up the dmesg on SB600 PMP softreset failure recovery
  • From: Shane Huang
• [PATCH 2.6.32] MCP5x conditional MSI support for sata_nv
  • From: Tony Vroon
• Re: HighPoint RocketRAID 2320
  • From: Davíð Steinn Geirsson
• Re: HighPoint RocketRAID 2320
  • From: Davíð Steinn Geirsson
• Re: Adding new pci vendor id
  • From: Grant Grundler
• Adding new pci vendor id
  • From: Tauseef Hussain
• Re: ahci sometimes fails to suspend controller
  • From: Rafael J. Wysocki
• [Bug 13886] Suspend to disk no longer works in 2.6.30.2 with an EIDE drive
  • From: bugzilla-daemon
• Re: HighPoint RocketRAID 2320
  • From: Tejun Heo
• Re: Extremely slow IO with a PCMCIA CompactFlash adapter
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/4 #upstream-fixes] ahci: filter FPDMA non-zero offset enable for Aspire 3810T
  • From: Tejun Heo
• [PATCH 3/4 #upstream-fixes] libata: make gtf_filter per-dev
  • From: Tejun Heo
• [PATCH 2/4 #upstream-fixes] libata: implement more acpi filtering options
  • From: Tejun Heo
• [PATCH 1/4 #upstream-fixes] libata: cosmetic updates
  • From: Tejun Heo
• [Bug 13886] Suspend to disk no longer works in 2.6.30.2 with an EIDE drive
  • From: bugzilla-daemon
• Re: ahci sometimes fails to suspend controller
  • From: Tejun Heo
• [PATCH #upstream-fixes] ahci: add workaround for on-board 5723s on some gigabyte boards
  • From: Tejun Heo
• Re: [PATCH 9/10] drivers/ata: introduce missing kfree
  • From: Tejun Heo
• Re: HighPoint RocketRAID 2320
  • From: Mark Lord
• Re: HighPoint RocketRAID 2320
  • From: Davíð Steinn Geirsson
• Re: HighPoint RocketRAID 2320
  • From: Ben Dooks
• Re: HighPoint RocketRAID 2320
  • From: Mark Lord
• Re: HighPoint RocketRAID 2320
  • From: Mark Lord
• Re: HighPoint RocketRAID 2320
  • From: Mark Lord
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• Re: HighPoint RocketRAID 2320
  • From: Davíð Steinn Geirsson
• HighPoint RocketRAID 2320
  • From: Davíð Steinn Geirsson
• Re: LSISAS1068E + WDC WD2002FYPS: I/O error & Sense Key
  • From: James Bottomley
• Re: LSISAS1068E + WDC WD2002FYPS: I/O error & Sense Key
  • From: Allan Wind
• Re: [PATCH] libata: Read buffer overflow
  • From: James Bottomley
• Re: LSISAS1068E + WDC WD2002FYPS: I/O error & Sense Key
  • From: James Bottomley
• [PATCH] libata: Read buffer overflow
  • From: Roel Kluin
• Re: ahci sometimes fails to suspend controller
  • From: Benjamin S.
• Re: LSISAS1068E + WDC WD2002FYPS: I/O error & Sense Key
  • From: Allan Wind
• Re: Question about LS120 floppies
  • From: Robert Hancock
• Re: Extremely slow IO with a PCMCIA CompactFlash adapter
  • From: Jack Byer
• Re: ahci sometimes fails to suspend controller
  • From: Tejun Heo
• Re: Question about LS120 floppies
  • From: Larry Finger
• Re: [PATCH 15/15] drivers/ide/ide-cd.c: Use DIV_ROUND_CLOSEST
  • From: David Miller
• Re: Extremely slow IO with a PCMCIA CompactFlash adapter
  • From: Bartlomiej Zolnierkiewicz
• Re: ahci sometimes fails to suspend controller
  • From: Benjamin S.
• Re: Extremely slow IO with a PCMCIA CompactFlash adapter
  • From: Jack Byer
• Re: [PATCH 15/15] drivers/ide/ide-cd.c: Use DIV_ROUND_CLOSEST
  • From: Borislav Petkov
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• [PATCH 15/15] drivers/ide/ide-cd.c: Use DIV_ROUND_CLOSEST
  • From: Julia Lawall
• Re: Extremely slow IO with a PCMCIA CompactFlash adapter
  • From: Robert Hancock
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• Re: [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: Sergei Shtylyov
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• Re: Bug report (suspend to disk is broken in 2.6.29+ with EIDE drive)
  • From: Rafael J. Wysocki
• [Bug 13886] Suspend to disk no longer works in 2.6.30.2 with an EIDE drive
  • From: bugzilla-daemon
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• Re: Bug report (suspend to disk is broken in 2.6.29+ with EIDE drive)
  • From: Robert Hancock
• Re: Bug report (suspend to disk is broken in 2.6.29+ with EIDE drive)
  • From: Marcin Slusarz
• [Bug 13886] Suspend to disk no longer works in 2.6.30.2 with an EIDE drive
  • From: bugzilla-daemon
• [Bug 13886] Suspend to disk no longer works in 2.6.30.2 with an EIDE drive
  • From: bugzilla-daemon
• [Bug 13886] Suspend to disk no longer works in 2.6.30.2 with an EIDE drive
  • From: bugzilla-daemon
• [Bug 13886] Suspend to disk no longer works in 2.6.30.2 with an EIDE drive
  • From: bugzilla-daemon
• [Bug 13886] Suspend to disk no longer works in 2.6.30.2 with an EIDE drive
  • From: bugzilla-daemon
• [Bug 13886] New: Suspend to disk no longer works in 2.6.30.2 with an EIDE drive
  • From: bugzilla-daemon
• [PATCH 9/10] drivers/ata: introduce missing kfree
  • From: Julia Lawall
• Re: cmd64x: irq 14: nobody cared - system is dreadfully slow
  • From: David Miller
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• Re: LSISAS1068E + WDC WD2002FYPS: I/O error & Sense Key
  • From: Allan Wind
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• Re: cmd64x: irq 14: nobody cared - system is dreadfully slow
  • From: Frans Pop
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• Re: [PATCH] Implement SATA AHCI FIS-based switching support
  • From: Tejun Heo
• hdparm-9.20 released, w/working TRIM & wiper.sh support
  • From: Mark Lord
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• Re: [PATCH #upstream] sata_sil24: always set protocol override for non-ATAPI data commands
  • From: Tejun Heo
• RE: [PATCH] Implement SATA AHCI FIS-based switching support
  • From: Huang, Shane
• [Bug 13882] Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• [Bug 13882] New: Cannot read CD: "Logical unit communication CRC error"
  • From: bugzilla-daemon
• [PATCH #upstream] libata: enhance command parsing
  • From: Robert Hancock
• Re: [PATCH #upstream] sata_sil24: always set protocol override for non-ATAPI data commands
  • From: Jeff Garzik
• Re: [PATCH] Implement SATA AHCI FIS-based switching support
  • From: Jeff Garzik
• Re: Drive tester
  • From: Greg Freemyer
• Re: [PATCH #upstream] sata_sil24: always set protocol override for non-ATAPI data commands
  • From: Mark Lord
• [PATCH #upstream] sata_sil24: always set protocol override for non-ATAPI data commands
  • From: Robert Hancock
• Re: SAT-2 and DSENSE
  • From: Mark Overby
• Re: hdparm-9.17 released, with experimental trim/wiper scripts for SSDs
  • From: Robert Hancock
• SAT-2 and DSENSE
  • From: Douglas Gilbert
• Re: hdparm-9.17 released, with experimental trim/wiper scripts for SSDs
  • From: Mark Lord
• Re: hdparm-9.17 released, with experimental trim/wiper scripts for SSDs
  • From: Mark Lord
• Re: hdparm-9.17 released, with experimental trim/wiper scripts for SSDs
  • From: Mark Lord
• Re: hdparm-9.17 released, with experimental trim/wiper scripts for SSDs
  • From: Robert Hancock
• hdparm-9.18 is now available.
  • From: Mark Lord
• Re: [PATCH][sata_fsl] Defer non-ncq commands when ncq commands active
  • From: Kumar Gala
• Re: [PATCH][sata_fsl] Defer non-ncq commands when ncq commands active
  • From: Kumar Gala
• Re: hdparm-9.17 released, with experimental trim/wiper scripts for SSDs
  • From: Mark Lord
• Re: SATA II NCQ and multi-port add-on card (PCI or PCIe x1)
  • From: Mark Lord
• [PATCH] Implement SATA AHCI FIS-based switching support
  • From: Shane Huang
• Re: hdparm-9.17 released, with experimental trim/wiper scripts for SSDs
  • From: Jeff Garzik
• Re: hdparm-9.17 released, with experimental trim/wiper scripts for SSDs
  • From: Robert Hancock
• Re: SATA II NCQ and multi-port add-on card (PCI or PCIe x1)
  • From: Tejun Heo
• Re: [PATCH] ATA: fix a problem that ata port print_id is used uninitialized
  • From: Tejun Heo
• SATA II NCQ and multi-port add-on card (PCI or PCIe x1)
  • From: dhdurgee
• [PATCH] ATA: fix a problem that ata port print_id is used uninitialized
  • From: Zhang Rui
• Re: hdparm-9.17 released, with experimental trim/wiper scripts for SSDs
  • From: Mark Lord
• hdparm-9.17 released, with experimental trim/wiper scripts for SSDs
  • From: Mark Lord
• Re: LSISAS1068E + WDC WD2002FYPS: I/O error & Sense Key
  • From: Robert Hancock
• Re: LSISAS1068E + WDC WD2002FYPS: I/O error & Sense Key
  • From: Allan Wind
• Re: Software RAID Problem
  • From: Randy Broman
• Re: LSISAS1068E + WDC WD2002FYPS: I/O error & Sense Key
  • From: Robert Hancock
• Re: [PATCH][sata_fsl] Defer non-ncq commands when ncq commands active
  • From: Robert Hancock
• Re: Software RAID Problem
  • From: Robert Hancock
• [PATCH][sata_fsl] Defer non-ncq commands when ncq commands active
  • From: ashish kalra
• Re: Software RAID Problem
  • From: Randy Broman
• Re: [PATCH] Add AMD SB900 SATA/IDE controller device IDs
  • From: Tejun Heo
• RE: [PATCH] Add AMD SB900 SATA/IDE controller device IDs
  • From: Shane Huang
• Re: [PATCH] Add AMD SB900 SATA/IDE controller device IDs
  • From: Jeff Garzik
• RE: [PATCH] Add AMD SB900 SATA/IDE controller device IDs
  • From: Huang, Shane
• Re: Software RAID Problem
  • From: Tejun Heo
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [RFC] add DMA setup FIS auto-activate feature
  • From: Jeff Garzik
• Re: [PATCH #upstream] libata: clear eh_info on reset completion
  • From: Jeff Garzik
• Re: [PATCH #NEXT] libata: add command name parsing for error output
  • From: Jeff Garzik
• Re: [PATCH 12/62] drivers/ata: Remove unnecessary semicolons
  • From: Jeff Garzik
• Re: [PATCH upstream] libata: remove spindown skipping and warning
  • From: Jeff Garzik
• Re: [PATCH] libata: Delegate nonrot flag setting to SCSI
  • From: Jeff Garzik
• Re: [PATCH] pcmcia: add CNF-CDROM-ID for ide/pata
  • From: Jeff Garzik
• Re: [PATCH] libata: add missing NULL pointer check to ata_eh_reset()
  • From: Jeff Garzik
• Re: [PATCH] libata: remove superfluous NULL pointer checks
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes v2] ahci: add device IDs for Ibex Peak ahci controllers
  • From: Jeff Garzik
• Re: [PATCH v2] libata: Updates and fixes for pata_at91 driver
  • From: Jeff Garzik
• Re: [PATCH] Add AMD SB900 SATA/IDE controller device IDs
  • From: Jeff Garzik
• Re: Software RAID Problem
  • From: rbroman
• Re: SiI3124 + SiI3726 pm
  • From: Jerome Vuarand
• Re: [RESEND][PATCH] sata_fsl: hard and soft reset split
  • From: Sergei Shtylyov
• Re: [PATCH][v3] Add asynchronous notification support
  • From: Ashish Kalra
• Re: [RESEND][PATCH] sata_fsl: hard and soft reset split
  • From: Ashish Kalra
• Re: [PATCH] Add AMD SB900 SATA/IDE controller device IDs
  • From: Tejun Heo
• [PATCH] Add AMD SB900 SATA/IDE controller device IDs
  • From: Shane Huang
• RE: ahci sometimes fails to suspend controller
  • From: Huang, Shane
• Re: ahci sometimes fails to suspend controller
  • From: Benjamin S.
• Re: Software RAID Problem
  • From: Tejun Heo
• RE: ahci sometimes fails to suspend controller
  • From: Huang, Shane
• Re: ahci sometimes fails to suspend controller
  • From: Tejun Heo
• Re: SiI3124 + SiI3726 pm
  • From: Tejun Heo
• Software RAID Problem
  • From: Randy Broman
• Re: SiI3124 + SiI3726 pm
  • From: Jerome Vuarand
• Re: ahci sometimes fails to suspend controller
  • From: Benjamin S.
• LSISAS1068E + WDC WD2002FYPS: I/O error & Sense Key
  • From: Allan Wind
• Re: [RFC] add DMA setup FIS auto-activate feature
  • From: Tejun Heo
• Re: [RFC] add DMA setup FIS auto-activate feature
  • From: Shaohua Li
• [PATCH] pcmcia: add CNF-CDROM-ID for ide/pata
  • From: Wolfram Sang
• [PATCH] libata: add missing NULL pointer check to ata_eh_reset()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] libata: remove superfluous NULL pointer checks
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFC] add DMA setup FIS auto-activate feature
  • From: Tejun Heo
• Re: SATA II NCQ and multi-port support for ICH7
  • From: Jeff Garzik
• Re: SATA II NCQ and multi-port support for ICH7
  • From: dhdurgee
• Re: SATA II NCQ and multi-port support for ICH7
  • From: Bjørn Mork
• Re: [RFC] add DMA setup FIS auto-activate feature
  • From: Shaohua Li
• Re: Drive tester
  • From: Robert Hancock
• Re: Drive tester
  • From: Greg Freemyer
• Re: [RFC] add DMA setup FIS auto-activate feature
  • From: Tejun Heo
• Re: [RFC] add DMA setup FIS auto-activate feature
  • From: Robert Hancock
• Re: [RFC] add DMA setup FIS auto-activate feature
  • From: Jeff Garzik
• Re: NCQ is slower in some cases?
  • From: Robert Hancock
• Re: NCQ is slower in some cases?
  • From: Mark Lord
• Re: Marvell 7042 has some problem on Marvell 6281(kirkwood) platform (Resent)
  • From: KueiHuan Chen
• Re: Marvell 7042 has some problem on Marvell 6281(kirkwood) platform (Resent)
  • From: saeed bishara
• Re: Marvell 7042 has some problem on Marvell 6281(kirkwood) platform (Resent)
  • From: saeed bishara
• Re: SATA port multiplier support in 2.6.21
  • From: Tejun Heo
• Re: ahci sometimes fails to suspend controller
  • From: Tejun Heo
• Re: [RFC] add DMA setup FIS auto-activate feature
  • From: Sergei Shtylyov
• Re: [RFC] add DMA setup FIS auto-activate feature
  • From: Shaohua Li
• Re: [RFC] add DMA setup FIS auto-activate feature
  • From: Jeff Garzik
• Re: [RFC] add DMA setup FIS auto-activate feature
  • From: Robert Hancock
• Re: [RFC] add DMA setup FIS auto-activate feature
  • From: Tejun Heo
• Re: [RFC] add DMA setup FIS auto-activate feature
  • From: Jeff Garzik
• Re: Question regarding FUA state
  • From: Robert Hancock
• Re: NCQ is slower in some cases?
  • From: Shaohua Li
• Re: [RFC] add DMA setup FIS auto-activate feature
  • From: Tejun Heo
• Re: [RFC] add DMA setup FIS auto-activate feature
  • From: Shaohua Li
• Re: SATA II NCQ and multi-port support for ICH7
  • From: Tejun Heo
• Re: NCQ is slower in some cases?
  • From: Jeff Garzik
• Re: [RFC] add DMA setup FIS auto-activate feature
  • From: Jeff Garzik
• Re: [RFC] add DMA setup FIS auto-activate feature
  • From: Tejun Heo
• [RFC] add DMA setup FIS auto-activate feature
  • From: Shaohua Li
• NCQ is slower in some cases?
  • From: Shaohua Li
• Re: Marvell 7042 has some problem on Marvell 6281(kirkwood) platform (Resent)
  • From: KueiHuan Chen
• Re: [PATCH #upstream-fixes] ahci add device ID for Ibex Peak ahci controller
  • From: David Milburn
• [PATCH #upstream-fixes v2] ahci: add device IDs for Ibex Peak ahci controllers
  • From: David Milburn
• Question regarding FUA state
  • From: Michal Soltys
• Re: SATA II NCQ and multi-port support for ICH7
  • From: Robert Hancock
• Re: SATA II NCQ and multi-port support for ICH7
  • From: Jeff Garzik
• SATA II NCQ and multi-port support for ICH7
  • From: dhdurgee
• Re: Marvell 7042 has some problem on Marvell 6281(kirkwood) platform (Resent)
  • From: saeed bishara
• Re: Marvell 7042 has some problem on Marvell 6281(kirkwood) platform (Resent)
  • From: KueiHuan Chen
• Re: Marvell 7042 has some problem on Marvell 6281(kirkwood) platform (Resent)
  • From: saeed bishara
• Re: Seagate 1.5TB x Suspend
  • From: Tejun Heo
• Re: Marvell 7042 has some problem on Marvell 6281(kirkwood) platform (Resent)
  • From: KueiHuan Chen
• Re: [PATCH 3/3] ide-tape: fix handling of postponed rqs
  • From: David Miller
• Re: [PATCH 3/3] ide-tape: fix handling of postponed rqs
  • From: Borislav Petkov
• [GIT]: IDE
  • From: David Miller
• Re: [PATCH 3/3] ide-tape: fix handling of postponed rqs
  • From: David Miller
• Re: [PATCH 2/3] ide-tape: convert to ide_debug_log macro
  • From: David Miller
• Re: [PATCH 1/3] ide-tape: fix debug call
  • From: David Miller
• Re: [PATCH] ide-tape: Don't leak kernel stack information
  • From: David Miller
• Re: [PATCH] ide: fix memory leak when flush command is issued
  • From: David Miller
• Re: Marvell 7042 has some problem on Marvell 6281(kirkwood) platform (Resent)
  • From: Mark Lord
• Marvell 7042 has some problem on Marvell 6281(kirkwood) platform (Resent)
  • From: KueiHuan Chen
• [PATCH #upstream-fixes] ahci add device ID for Ibex Peak ahci controller
  • From: David Milburn
• Re: [PATCH #upstream-fixes 1/2] libata: cosmetic updates
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes 1/2] libata: cosmetic updates
  • From: Tejun Heo
• [PATCH #upstream-fixes 1/2] libata: cosmetic updates
  • From: Tejun Heo
• Seagate 1.5TB x Suspend
  • From: Dâniel Fraga
• command queue errors with 2.6.27
  • From: Learner Study
• Re: SATA port multiplier support in 2.6.21
  • From: Jim Paris
• SATA port multiplier support in 2.6.21
  • From: Learner Study
• [Bug 13138] Legacy IDE SiS:CPU Stalls When Probing IDE Interfaces
  • From: bugzilla-daemon
• Re: [PATCH] ide-tape: Don't leak kernel stack information
  • From: Borislav Petkov
• Re: [PATCH] ide-tape: Don't leak kernel stack information
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-tape: Don't leak kernel stack information
  • From: Michael Buesch
• Re: [PATCH] ide-tape: Don't leak kernel stack information
  • From: Borislav Petkov
• Re: [PATCH] ide-tape: Don't leak kernel stack information
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-tape: Don't leak kernel stack information
  • From: Borislav Petkov
• ahci sometimes fails to suspend controller
  • From: Benjamin S.
• [PATCH] ide-tape: Don't leak kernel stack information
  • From: Michael Buesch
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• potential null deref in ide_port_apply_params()
  • From: Dan Carpenter
• potential null deref in drivers/ide/ide-io.c start_request().
  • From: Dan Carpenter
• Re : Test only. [resolved]
  • From: Sébastien Major
• [PATCH 3/3] ide-tape: fix handling of postponed rqs
  • From: Borislav Petkov
• [PATCH 2/3] ide-tape: convert to ide_debug_log macro
  • From: Borislav Petkov
• [PATCH 1/3] ide-tape: fix debug call
  • From: Borislav Petkov
• [PATCH 0/3] ide-tape: misc stuff
  • From: Borislav Petkov
• Re: [PATCH] libata: Export AHCI capabilities
  • From: Matthew Garrett
• Re: [PATCH] libata: Export AHCI capabilities
  • From: Robert Hancock
• [PATCH] libata: Export AHCI capabilities
  • From: Matthew Garrett
• Re: [PATCH #upstream] libata: clear eh_info on reset completion
  • From: Zdenek Kaspar
• Re: [PATCH] ide: fix memory leak when flush command is issued
  • From: Bartlomiej Zolnierkiewicz
• end_request: I/O error, dev hda, sector 0
  • From: Marvin Schmidt
• Re: Storage fixup for WDC WD1600BEVT-22ZCT0 in an MSI Wind U100 netbook
  • From: Tejun Heo
• Re: hdaprm -Y /dev/sda /dev/sdb -> I/O error -> disk kicked out of RAID - is it normal?
  • From: Tejun Heo
• Re: hdaprm -Y /dev/sda /dev/sdb -> I/O error -> disk kicked out of RAID - is it normal?
  • From: Jeff Garzik
• Re: hdaprm -Y /dev/sda /dev/sdb -> I/O error -> disk kicked out of RAID - is it normal?
  • From: Tejun Heo
• Re: hdaprm -Y /dev/sda /dev/sdb -> I/O error -> disk kicked out of RAID - is it normal?
  • From: NeilBrown
• Re: hdaprm -Y /dev/sda /dev/sdb -> I/O error -> disk kicked out of RAID - is it normal?
  • From: Tejun Heo
• Re: [PATCH #NEXT] libata: add command name parsing for error output
  • From: Tejun Heo
• Re: softreset
  • From: Tejun Heo
• [PATCH #upstream] libata: clear eh_info on reset completion
  • From: Tejun Heo
• Re: AHCI: connection status changed + hard resetting link with 2.6.30+
  • From: Tejun Heo
• hdaprm -Y /dev/sda /dev/sdb -> I/O error -> disk kicked out of RAID - is it normal?
  • From: Tomasz Chmielewski
• [PATCH 1/3] libata: Allow ports to be flagged as hotpluggable
  • From: Matthew Garrett
• [PATCH 3/3] libata: Allow AHCI to flag ports as non-hotpluggable
  • From: Matthew Garrett
• [PATCH 2/3] libata: Flag some SATA devices as non-hotpluggable
  • From: Matthew Garrett
• [PATCH v2 0/3] libata: expose port hotplug information to userspace
  • From: Matthew Garrett
• [PATCH v2] libata: Updates and fixes for pata_at91 driver
  • From: Sergey Matyukevich
• [PATCH] ide: fix memory leak when flush command is issued
  • From: Maxime Bizon
• Re: [PATCH 1/4] scsi: Allow hosts to be flagged as hotpluggable
  • From: Matthew Garrett
• Re: [PATCH 1/4] scsi: Allow hosts to be flagged as hotpluggable
  • From: James Bottomley