I forgot to attach the dmesg output. Sorry about that.
On Mon, Aug 03, 2009 at 08:18:36PM +0000, Davíð Steinn Geirsson wrote:
> Hi all,
>
> I'm throwing this out here in the hopes that someone smarter than me has
> a simple solution - never hurts to be optimistic. :)
>
> I have a HighPoint controller, RocketRAID 2320 (8-port PCIe SATA fakeraid). It is only supported by an ugly binary blob deceptively labeled as an "open source driver" from HighPoint (rr232x). Looking at the wrapper around the blob, it seems this driver claims only the 2320 and 2322 controllers:
>
> static const struct pci_device_id hpt_pci_tbl[] = {
> {PCI_DEVICE(0x1103, 0x2320), 0, 0, 0},
> {PCI_DEVICE(0x1103, 0x2322), 0, 0, 0},
> {}
> };
>
> I've found that this controller contains a marvell 88SX6081 chip, which
> should be supported by the sata_mv driver. That driver claims device IDs
> 2300 and 2310:
> { PCI_VDEVICE(TTI, 0x2300), chip_7042 },
> { PCI_VDEVICE(TTI, 0x2310), chip_7042 },
>
> So, ever hopeful, I tried adding the 2320 into the table:
> { PCI_VDEVICE(TTI, 0x2320), chip_608x },
>
> When I do this, the kernel successfully probes the attached disks and
> their capacity, but immediately errors out and starts resetting the
> ports repeatedly.
>
> I've attached a dmesg output. I can provide any further debugging info
> or try different things.
>
> I've tried defining the controller with chip_6042, chip_604x and
> chip_7042 with no success.
>
> PS: Please CC me on replies, as I'm not subscribed to linux-ide.
>
> Kind regards,
>
> --
> Davíð Steinn Geirsson
> david@xxxxxx
--
Davíð Steinn Geirsson
david@xxxxxx
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-btrfsnewformat2 (2.6.30) (root@slimer) (gcc version 4.3.3 (Debian 4.3.3-15) ) #3 SMP Mon Aug 3 18:09:53 GMT 2009
[ 0.000000] Command line: root=/dev/mapper/slimerroot-root ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffc0000 (usable)
[ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cffce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffce000 - 00000000cfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001b0000000 (usable)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x1b0000 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001b0000000 aka 6912M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcffc0 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cffc0000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cffc0000 page 4k
[ 0.000000] kernel direct mapping tables up to cffc0000 @ 10000-16000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001b0000000
[ 0.000000] 0100000000 - 01b0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1b0000000 @ 14000-1c000
[ 0.000000] RAMDISK: 37753000 - 37fef542
[ 0.000000] ACPI: RSDP 00000000000fb800 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cffc0100 00054 (v01 A_M_I_ OEMXSDT 09000710 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cffc0290 000F4 (v03 A_M_I_ OEMFACP 09000710 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cffc05c0 051BD (v01 A0653 A0653000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 00000000cffce000 00040
[ 0.000000] ACPI: APIC 00000000cffc0390 00070 (v01 A_M_I_ OEMAPIC 09000710 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cffc0400 0003C (v01 A_M_I_ OEMMCFG 09000710 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffce040 00060 (v01 A_M_I_ AMI_OEM 09000710 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cffc5780 00038 (v01 A_M_I_ OEMHPET0 09000710 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cffc57c0 00248 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001b0000000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000001b0000000
[ 0.000000] NODE_DATA [0000000000017000 - 000000000001efff]
[ 0.000000] bootmap [000000000001f000 - 0000000000054fff] pages 36
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 01b0000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00007d38cc] TEXT DATA BSS ==> [0000200000 - 00007d38cc]
[ 0.000000] #3 [0037753000 - 0037fef542] RAMDISK ==> [0037753000 - 0037fef542]
[ 0.000000] #4 [000009bc00 - 0000100000] BIOS reserved ==> [000009bc00 - 0000100000]
[ 0.000000] #5 [00007d4000 - 00007d4290] BRK ==> [00007d4000 - 00007d4290]
[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #7 [0000014000 - 0000017000] PGTABLE ==> [0000014000 - 0000017000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffe20000000000-ffffe20005ffffff] PMD -> [ffff880028200000-ffff88002d7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001b0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000cffc0
[ 0.000000] 0: 0x00100000 -> 0x001b0000
[ 0.000000] On node 0 totalpages: 1572683
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1601 pages reserved
[ 0.000000] DMA zone: 2322 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833528 pages, LIFO batch:31
[ 0.000000] Normal zone: 9856 pages used for memmap
[ 0.000000] Normal zone: 711040 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cffce000
[ 0.000000] PM: Registered nosave memory: 00000000cffce000 - 00000000cfff0000
[ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff780000
[ 0.000000] PM: Registered nosave memory: 00000000ff780000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages at ffff880028034000, static data 76256 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1546890
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/mapper/slimerroot-root ro
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2410.917 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ 20000000 size 32 MB
[ 0.004000] Aperture pointing to e820 RAM. Ignoring.
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.004000] Memory: 6121788k/7077888k available (2784k kernel code, 787156k absent, 168944k reserved, 1376k data, 560k init)
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4821.83 BogoMIPS (lpj=9643668)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006480] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009164] Mount-cache hash table entries: 256
[ 0.009382] Initializing cgroup subsys ns
[ 0.009433] Initializing cgroup subsys cpuacct
[ 0.009484] Initializing cgroup subsys devices
[ 0.009538] Initializing cgroup subsys freezer
[ 0.009587] Initializing cgroup subsys net_cls
[ 0.009667] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.009722] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.009772] CPU 0/0x0 -> Node 0
[ 0.009823] tseg: 0000000000
[ 0.009834] CPU: Physical Processor ID: 0
[ 0.009886] CPU: Processor Core ID: 0
[ 0.009941] using C1E aware idle routine
[ 0.010605] ACPI: Core revision 20090320
[ 0.017452] Setting APIC routing to flat
[ 0.017951] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.024001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.024001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.024001] ..... (found apic 0 pin 0) ...
[ 0.065542] ....... works.
[ 0.065588] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4821.87 BogoMIPS (lpj=9643742)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.152416] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[ 0.152941] Brought up 2 CPUs
[ 0.152989] Total of 2 processors activated (9643.70 BogoMIPS).
[ 0.153144] CPU0 attaching sched-domain:
[ 0.153147] domain 0: span 0-1 level MC
[ 0.153149] groups: 0 1
[ 0.153154] CPU1 attaching sched-domain:
[ 0.153156] domain 0: span 0-1 level MC
[ 0.153157] groups: 1 0
[ 0.153213] net_namespace: 1936 bytes
[ 0.153213] Booting paravirtualized kernel on bare hardware
[ 0.153213] regulator: core version 0.5
[ 0.153213] NET: Registered protocol family 16
[ 0.153213] node 0 link 0: io port [1000, ffffff]
[ 0.153213] TOM: 00000000d0000000 aka 3328M
[ 0.153213] node 0 link 0: mmio [e0000000, efffffff]
[ 0.153213] node 0 link 0: mmio [a0000, bffff]
[ 0.153213] node 0 link 0: mmio [d0000000, fe0bffff]
[ 0.153213] TOM2: 00000001b0000000 aka 6912M
[ 0.153213] bus: [00,ff] on node 0 link 0
[ 0.153213] bus: 00 index 0 io port: [0, ffff]
[ 0.153213] bus: 00 index 1 mmio: [d0000000, ffffffff]
[ 0.153213] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.153213] bus: 00 index 3 mmio: [1b0000000, fcffffffff]
[ 0.153213] ACPI: bus type pci registered
[ 0.153213] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.153213] PCI: Not using MMCONFIG.
[ 0.153213] PCI: Using configuration type 1 for base access
[ 0.156092] bio: create slab <bio-0> at 0
[ 0.156648] ACPI: EC: Look up EC in DSDT
[ 0.167304] ACPI: Interpreter enabled
[ 0.167354] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.167559] ACPI: Using IOAPIC for interrupt routing
[ 0.168056] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.175159] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.185519] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.196115] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - E5, should be D8 [20090320]
[ 0.196354] ACPI: No dock devices found.
[ 0.196466] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.196549] pci 0000:00:01.1: reg 10 io port: [0xbc00-0xbc3f]
[ 0.196549] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
[ 0.196549] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
[ 0.196549] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.196549] pci 0000:00:01.1: PME# disabled
[ 0.196549] pci 0000:00:02.0: reg 10 32bit mmio: [0xdfbff000-0xdfbfffff]
[ 0.196549] pci 0000:00:02.0: supports D1 D2
[ 0.196549] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196549] pci 0000:00:02.0: PME# disabled
[ 0.196549] pci 0000:00:02.1: reg 10 32bit mmio: [0xdfbfec00-0xdfbfecff]
[ 0.196549] pci 0000:00:02.1: supports D1 D2
[ 0.196549] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196600] pci 0000:00:02.1: PME# disabled
[ 0.196703] pci 0000:00:05.0: reg 10 32bit mmio: [0xdfbf8000-0xdfbfbfff]
[ 0.196727] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.196780] pci 0000:00:05.0: PME# disabled
[ 0.196858] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
[ 0.196891] pci 0000:00:07.0: reg 10 32bit mmio: [0xdfbfd000-0xdfbfdfff]
[ 0.196894] pci 0000:00:07.0: reg 14 io port: [0xb480-0xb487]
[ 0.196913] pci 0000:00:07.0: supports D1 D2
[ 0.196915] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196971] pci 0000:00:07.0: PME# disabled
[ 0.197038] pci 0000:00:08.0: reg 10 io port: [0xb400-0xb407]
[ 0.197042] pci 0000:00:08.0: reg 14 io port: [0xb080-0xb083]
[ 0.197045] pci 0000:00:08.0: reg 18 io port: [0xb000-0xb007]
[ 0.197048] pci 0000:00:08.0: reg 1c io port: [0xac00-0xac03]
[ 0.197052] pci 0000:00:08.0: reg 20 io port: [0xa880-0xa88f]
[ 0.197055] pci 0000:00:08.0: reg 24 32bit mmio: [0xdfbfc000-0xdfbfcfff]
[ 0.197083] pci 0000:00:08.1: reg 10 io port: [0xa800-0xa807]
[ 0.197086] pci 0000:00:08.1: reg 14 io port: [0xa480-0xa483]
[ 0.197090] pci 0000:00:08.1: reg 18 io port: [0xa400-0xa407]
[ 0.197093] pci 0000:00:08.1: reg 1c io port: [0xa080-0xa083]
[ 0.197096] pci 0000:00:08.1: reg 20 io port: [0xa000-0xa00f]
[ 0.197100] pci 0000:00:08.1: reg 24 32bit mmio: [0xdfbf3000-0xdfbf3fff]
[ 0.197141] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.197195] pci 0000:00:09.0: PME# disabled
[ 0.197270] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.197324] pci 0000:00:0b.0: PME# disabled
[ 0.197398] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.197452] pci 0000:00:0c.0: PME# disabled
[ 0.197595] pci 0000:01:03.0: reg 10 32bit mmio: [0xdfcff800-0xdfcfffff]
[ 0.197600] pci 0000:01:03.0: reg 14 io port: [0xcc00-0xcc7f]
[ 0.197629] pci 0000:01:03.0: supports D2
[ 0.197631] pci 0000:01:03.0: PME# supported from D2 D3hot D3cold
[ 0.197685] pci 0000:01:03.0: PME# disabled
[ 0.197762] pci 0000:01:0a.0: reg 10 32bit mmio: [0xdfc00000-0xdfc7ffff]
[ 0.197767] pci 0000:01:0a.0: reg 14 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.197784] pci 0000:01:0a.0: reg 30 32bit mmio: [0xdfce0000-0xdfceffff]
[ 0.197797] pci 0000:01:0a.0: supports D1 D2
[ 0.197820] pci 0000:00:04.0: transparent bridge
[ 0.197871] pci 0000:00:04.0: bridge io port: [0xc000-0xcfff]
[ 0.197874] pci 0000:00:04.0: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
[ 0.197877] pci 0000:00:04.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.197911] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.197965] pci 0000:02:00.0: PME# disabled
[ 0.198051] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
[ 0.198107] pci 0000:02:00.2: PME# disabled
[ 0.198192] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff]
[ 0.198194] pci 0000:00:09.0: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
[ 0.198270] pci 0000:04:04.0: reg 10 64bit mmio: [0xdfe00000-0xdfefffff]
[ 0.198275] pci 0000:04:04.0: reg 18 io port: [0xd800-0xd8ff]
[ 0.198337] pci 0000:02:00.2: bridge io port: [0xd000-0xdfff]
[ 0.198340] pci 0000:02:00.2: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
[ 0.198397] pci 0000:05:00.0: reg 10 32bit mmio: [0xdffe0000-0xdfffffff]
[ 0.198406] pci 0000:05:00.0: reg 14 32bit mmio: [0xdffc0000-0xdffdffff]
[ 0.198414] pci 0000:05:00.0: reg 18 io port: [0xec00-0xec1f]
[ 0.198441] pci 0000:05:00.0: reg 30 32bit mmio: [0xdffa0000-0xdffbffff]
[ 0.198477] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.198533] pci 0000:05:00.0: PME# disabled
[ 0.198628] pci 0000:00:0b.0: bridge io port: [0xe000-0xefff]
[ 0.198630] pci 0000:00:0b.0: bridge 32bit mmio: [0xdff00000-0xdfffffff]
[ 0.198674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.198841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.198955] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.199018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.200020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.208199] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.208686] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.209169] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
[ 0.209619] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.210104] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.210584] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[ 0.211040] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.211517] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11
[ 0.212392] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
[ 0.212843] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[ 0.213298] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[ 0.213758] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 0.214209] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.214692] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 0.215176] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.215632] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.216141] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[ 0.216601] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
[ 0.217091] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.217409] usbcore: registered new interface driver usbfs
[ 0.217409] usbcore: registered new interface driver hub
[ 0.217409] usbcore: registered new device driver usb
[ 0.217409] PCI: Using ACPI for IRQ routing
[ 0.224127] PCI-DMA: Disabling AGP.
[ 0.224248] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.224248] PCI-DMA: using GART IOMMU.
[ 0.224248] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.224649] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.224816] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.232011] Switched to high resolution mode on CPU 0
[ 0.232349] Switched to high resolution mode on CPU 1
[ 0.236012] pnp: PnP ACPI init
[ 0.236077] ACPI: bus type pnp registered
[ 0.243754] pnp: PnP ACPI: found 15 devices
[ 0.243808] ACPI: ACPI bus type pnp unregistered
[ 0.243868] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.243922] system 00:07: ioport range 0x800-0x80f has been reserved
[ 0.243976] system 00:07: ioport range 0x500-0x57f has been reserved
[ 0.244044] system 00:07: ioport range 0x580-0x5ff has been reserved
[ 0.244099] system 00:07: ioport range 0x800-0x87f could not be reserved
[ 0.244155] system 00:07: ioport range 0x880-0x8ff has been reserved
[ 0.244208] system 00:07: ioport range 0xd00-0xd7f has been reserved
[ 0.244262] system 00:07: ioport range 0xd80-0xdff has been reserved
[ 0.244319] system 00:07: ioport range 0x2000-0x207f has been reserved
[ 0.244373] system 00:07: ioport range 0x2080-0x20ff has been reserved
[ 0.244429] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.244484] system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
[ 0.244542] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.244597] system 00:07: iomem range 0xffb80000-0xffffffff has been reserved
[ 0.244655] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.244711] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.244770] system 00:0b: ioport range 0x230-0x23f has been reserved
[ 0.244827] system 00:0b: ioport range 0x290-0x29f has been reserved
[ 0.244881] system 00:0b: ioport range 0xa00-0xa0f has been reserved
[ 0.244934] system 00:0b: ioport range 0xa10-0xa1f has been reserved
[ 0.244990] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.245053] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.245111] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.245166] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.245221] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
[ 0.245290] system 00:0e: iomem range 0xff780000-0xffffffff could not be reserved
[ 0.250383] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 0.250436] pci 0000:00:04.0: IO window: 0xc000-0xcfff
[ 0.250489] pci 0000:00:04.0: MEM window: 0xdfc00000-0xdfcfffff
[ 0.250543] pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 0.250617] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[ 0.250669] pci 0000:02:00.0: IO window: disabled
[ 0.250721] pci 0000:02:00.0: MEM window: disabled
[ 0.250772] pci 0000:02:00.0: PREFETCH window: disabled
[ 0.250827] pci 0000:02:00.2: PCI bridge, secondary bus 0000:04
[ 0.250880] pci 0000:02:00.2: IO window: 0xd000-0xdfff
[ 0.250933] pci 0000:02:00.2: MEM window: 0xdfd00000-0xdfefffff
[ 0.250986] pci 0000:02:00.2: PREFETCH window: disabled
[ 0.251040] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.251093] pci 0000:00:09.0: IO window: 0xd000-0xdfff
[ 0.251145] pci 0000:00:09.0: MEM window: 0xdfd00000-0xdfefffff
[ 0.251198] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.251251] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:05
[ 0.251304] pci 0000:00:0b.0: IO window: 0xe000-0xefff
[ 0.251356] pci 0000:00:0b.0: MEM window: 0xdff00000-0xdfffffff
[ 0.251408] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.251461] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:06
[ 0.251513] pci 0000:00:0c.0: IO window: disabled
[ 0.251564] pci 0000:00:0c.0: MEM window: disabled
[ 0.251617] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.251673] pci 0000:00:04.0: setting latency timer to 64
[ 0.251678] pci 0000:00:09.0: setting latency timer to 64
[ 0.251683] pci 0000:02:00.0: setting latency timer to 64
[ 0.251688] pci 0000:02:00.2: setting latency timer to 64
[ 0.251692] pci 0000:00:0b.0: setting latency timer to 64
[ 0.251696] pci 0000:00:0c.0: setting latency timer to 64
[ 0.251699] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.251701] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.251704] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.251706] pci_bus 0000:01: resource 1 mem: [0xdfc00000-0xdfcfffff]
[ 0.251708] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]
[ 0.251711] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.251713] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.251716] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.251718] pci_bus 0000:02: resource 1 mem: [0xdfd00000-0xdfefffff]
[ 0.251721] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.251723] pci_bus 0000:04: resource 1 mem: [0xdfd00000-0xdfefffff]
[ 0.251725] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.251727] pci_bus 0000:05: resource 1 mem: [0xdff00000-0xdfffffff]
[ 0.251825] NET: Registered protocol family 2
[ 0.280277] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.282840] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.288086] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.288771] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.288826] TCP reno registered
[ 0.296125] NET: Registered protocol family 1
[ 0.296231] Trying to unpack rootfs image as initramfs...
[ 0.491639] Freeing initrd memory: 8817k freed
[ 0.498455] audit: initializing netlink socket (disabled)
[ 0.498519] type=2000 audit(1249327708.496:1): initialized
[ 0.499073] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.499289] VFS: Disk quotas dquot_6.5.2
[ 0.499377] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.499490] msgmni has been set to 11973
[ 0.499737] alg: No test for stdrng (krng)
[ 0.499857] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.499930] io scheduler noop registered
[ 0.499979] io scheduler anticipatory registered
[ 0.500045] io scheduler deadline registered
[ 0.500124] io scheduler cfq registered (default)
[ 1.024407] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.024502] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.024606] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.024709] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.024811] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.024917] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.025031] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.025145] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.025205] pci 0000:01:0a.0: Boot video device
[ 1.025372] alloc irq_desc for 24 on cpu 0 node 0
[ 1.025375] alloc kstat_irqs on cpu 0 node 0
[ 1.025382] pcieport-driver 0000:00:09.0: irq 24 for MSI/MSI-X
[ 1.025389] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 1.025547] alloc irq_desc for 25 on cpu 0 node 0
[ 1.025549] alloc kstat_irqs on cpu 0 node 0
[ 1.025554] pcieport-driver 0000:00:0b.0: irq 25 for MSI/MSI-X
[ 1.025559] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 1.025703] alloc irq_desc for 26 on cpu 0 node 0
[ 1.025705] alloc kstat_irqs on cpu 0 node 0
[ 1.025709] pcieport-driver 0000:00:0c.0: irq 26 for MSI/MSI-X
[ 1.025715] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.029669] Linux agpgart interface v0.103
[ 1.029721] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.029897] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.030384] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.032223] brd: module loaded
[ 1.032351] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.032624] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.032678] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.032889] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.033278] mice: PS/2 mouse device common for all mice
[ 1.033400] rtc_cmos 00:02: RTC can wake from S4
[ 1.033513] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.033603] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.033695] cpuidle: using governor ladder
[ 1.033744] cpuidle: using governor menu
[ 1.033796] No iBFT detected.
[ 1.034176] TCP cubic registered
[ 1.034321] NET: Registered protocol family 10
[ 1.034850] lo: Disabled Privacy Extensions
[ 1.035183] Mobile IPv6
[ 1.035230] NET: Registered protocol family 17
[ 1.035436] registered taskstats version 1
[ 1.035670] rtc_cmos 00:02: setting system clock to 2009-08-03 19:28:29 UTC (1249327709)
[ 1.035801] Freeing unused kernel memory: 560k freed
[ 1.036132] Write protecting the kernel read-only data: 3772k
[ 1.051170] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.196659] FDC 0 is a post-1991 82077
[ 1.203883] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.204354] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[ 1.204410] alloc irq_desc for 23 on cpu 0 node 0
[ 1.204412] alloc kstat_irqs on cpu 0 node 0
[ 1.204424] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
[ 1.204528] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.204531] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.204675] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.204780] ehci_hcd 0000:00:02.1: debug port 1
[ 1.204832] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.204853] ehci_hcd 0000:00:02.1: irq 23, io mem 0xdfbfec00
[ 1.208509] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[ 1.208568] alloc irq_desc for 19 on cpu 0 node 0
[ 1.208570] alloc kstat_irqs on cpu 0 node 0
[ 1.208580] firewire_ohci 0000:01:03.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
[ 1.218902] Uniform Multi-Platform E-IDE driver
[ 1.219022] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.219097] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.219151] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.219221] usb usb1: Product: EHCI Host Controller
[ 1.219271] usb usb1: Manufacturer: Linux 2.6.30-btrfsnewformat2 ehci_hcd
[ 1.219324] usb usb1: SerialNumber: 0000:00:02.1
[ 1.219436] usb usb1: configuration #1 chosen from 1 choice
[ 1.219513] hub 1-0:1.0: USB hub found
[ 1.219568] hub 1-0:1.0: 10 ports detected
[ 1.220033] amd74xx 0000:00:06.0: UDMA133 controller
[ 1.220088] amd74xx 0000:00:06.0: IDE controller (0x10de:0x03ec rev 0xa2)
[ 1.220159] amd74xx 0000:00:06.0: IDE port disabled
[ 1.220217] amd74xx 0000:00:06.0: BIOS didn't set cable bits correctly. Enabling workaround.
[ 1.220289] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
[ 1.220346] ide0: BM-DMA at 0xffa0-0xffa7
[ 1.220399] Probing IDE interface ide0...
[ 1.239811] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.258688] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
[ 1.258744] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.292061] firewire_ohci: Added fw-ohci device 0000:01:03.0, OHCI version 1.10
[ 1.301786] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 18
[ 1.301846] alloc irq_desc for 18 on cpu 0 node 0
[ 1.301848] alloc kstat_irqs on cpu 0 node 0
[ 1.301859] e1000e 0000:05:00.0: PCI INT A -> Link[LNEB] -> GSI 18 (level, low) -> IRQ 18
[ 1.301938] e1000e 0000:05:00.0: setting latency timer to 64
[ 1.302092] alloc irq_desc for 27 on cpu 0 node 0
[ 1.302094] alloc kstat_irqs on cpu 0 node 0
[ 1.302106] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
[ 1.483169] 0000:05:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:17:24:85:7a
[ 1.483242] 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.483370] 0000:05:00.0: eth0: MAC: 1, PHY: 4, PBA No: d50855-002
[ 1.484859] udev: renamed network interface eth0 to eth1
[ 1.508107] hda: WDC WD1600JB-00GVA0, ATA DISK drive
[ 1.788096] firewire_core: created device fw0: GUID 0011d80000f46d61, S400
[ 2.180053] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.181275] hda: UDMA/100 mode selected
[ 2.182591] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.200156] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 2.200559] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 2.200614] alloc irq_desc for 22 on cpu 0 node 0
[ 2.200616] alloc kstat_irqs on cpu 0 node 0
[ 2.200625] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[ 2.200698] forcedeth 0000:00:07.0: setting latency timer to 64
[ 2.720845] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:18:f3:aa:18:da
[ 2.720918] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 2.721739] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
[ 2.721797] alloc irq_desc for 21 on cpu 0 node 0
[ 2.721799] alloc kstat_irqs on cpu 0 node 0
[ 2.721809] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
[ 2.721911] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 2.721914] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.722070] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 2.722169] ohci_hcd 0000:00:02.0: irq 21, io mem 0xdfbff000
[ 2.778017] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.778072] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.778141] usb usb2: Product: OHCI Host Controller
[ 2.778191] usb usb2: Manufacturer: Linux 2.6.30-btrfsnewformat2 ohci_hcd
[ 2.778245] usb usb2: SerialNumber: 0000:00:02.0
[ 2.778347] usb usb2: configuration #1 chosen from 1 choice
[ 2.778428] hub 2-0:1.0: USB hub found
[ 2.778484] hub 2-0:1.0: 10 ports detected
[ 2.791949] SCSI subsystem initialized
[ 2.806180] libata version 3.00 loaded.
[ 2.809201] sata_nv 0000:00:08.0: version 3.5
[ 2.809534] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 2.809594] alloc irq_desc for 20 on cpu 0 node 0
[ 2.809596] alloc kstat_irqs on cpu 0 node 0
[ 2.809606] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20
[ 2.809747] sata_nv 0000:00:08.0: setting latency timer to 64
[ 2.809812] scsi0 : sata_nv
[ 2.809970] scsi1 : sata_nv
[ 2.810165] ata1: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 20
[ 2.810221] ata2: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 20
[ 2.810595] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 2.810649] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 23 (level, low) -> IRQ 23
[ 2.810759] sata_nv 0000:00:08.1: setting latency timer to 64
[ 2.810808] scsi2 : sata_nv
[ 2.810943] scsi3 : sata_nv
[ 2.811141] ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa000 irq 23
[ 2.811196] ata4: SATA max UDMA/133 cmd 0xa400 ctl 0xa080 bmdma 0xa008 irq 23
[ 2.910771] ide-gd driver 1.18
[ 2.910860] hda: max request size: 512KiB
[ 2.912229] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
[ 2.914312] hda: cache flushes supported
[ 2.914419] hda: hda1 hda2 hda3
[ 3.284031] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.293458] ata1.00: ATA-6: WDC WD1600JD-00GBB0, 02.05D02, max UDMA/100
[ 3.293516] ata1.00: 312581808 sectors, multi 16: LBA48
[ 3.293576] ata1.00: applying bridge limits
[ 3.309473] ata1.00: configured for UDMA/100
[ 3.309617] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JD-00G 02.0 PQ: 0 ANSI: 5
[ 3.776029] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.784112] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB03, max UDMA/100
[ 3.800126] ata2.00: configured for UDMA/100
[ 3.801554] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB03 PQ: 0 ANSI: 5
[ 4.133511] Driver 'sd' needs updating - please use bus_type methods
[ 4.133701] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 4.133786] sd 0:0:0:0: [sda] Write Protect is off
[ 4.133837] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.133855] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.134013] sda: sda1 sda2 sda3
[ 4.186285] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.188634] Driver 'sr' needs updating - please use bus_type methods
[ 4.192142] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.192218] Uniform CD-ROM driver Revision: 3.20
[ 4.192368] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.198397] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.198480] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.555496] md: raid1 personality registered for level 1
[ 4.557503] xor: automatically using best checksumming function: generic_sse
[ 4.577006] generic_sse: 7436.000 MB/sec
[ 4.577056] xor: using function: generic_sse (7436.000 MB/sec)
[ 4.577890] async_tx: api initialized (async)
[ 4.645034] raid6: int64x1 2251 MB/s
[ 4.713017] raid6: int64x2 2856 MB/s
[ 4.781012] raid6: int64x4 2204 MB/s
[ 4.849031] raid6: int64x8 2016 MB/s
[ 4.917047] raid6: sse2x1 1137 MB/s
[ 4.985014] raid6: sse2x2 1923 MB/s
[ 5.053018] raid6: sse2x4 2974 MB/s
[ 5.053066] raid6: using algorithm sse2x4 (2974 MB/s)
[ 5.055977] md: raid6 personality registered for level 6
[ 5.056049] md: raid5 personality registered for level 5
[ 5.056100] md: raid4 personality registered for level 4
[ 5.169710] md: md0 stopped.
[ 5.219350] md: bind<hda1>
[ 5.219570] md: bind<sda1>
[ 5.220821] raid1: raid set md0 active with 2 out of 2 mirrors
[ 5.225630] md0: unknown partition table
[ 5.307966] md: md1 stopped.
[ 5.309721] md: bind<hda2>
[ 5.309932] md: bind<sda2>
[ 5.311210] raid1: raid set md1 active with 2 out of 2 mirrors
[ 5.312359] md1: unknown partition table
[ 5.347243] device-mapper: uevent: version 1.0.3
[ 5.347920] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[ 5.457859] PM: Starting manual resume from disk
[ 5.512743] kjournald starting. Commit interval 5 seconds
[ 5.512804] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.802146] udev: starting version 141
[ 7.086766] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 7.091888] ACPI: Power Button [PWRF]
[ 7.092024] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 7.092184] ACPI: Power Button [PWRB]
[ 7.146485] processor ACPI_CPU:00: registered as cooling_device0
[ 7.146749] processor ACPI_CPU:01: registered as cooling_device1
[ 7.150106] parport_pc 00:06: reported by Plug and Play ACPI
[ 7.150207] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 7.157637] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.169413] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 7.229116] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.266115] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
[ 7.266189] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
[ 7.345762] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 7.485611] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 7.485669] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 7.485906] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 7.573557] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.240212] hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
[ 8.240381] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
[ 11.119701] Adding 3943948k swap on /dev/sda3. Priority:-1 extents:1 across:3943948k
[ 11.142212] Adding 3943948k swap on /dev/hda3. Priority:-2 extents:1 across:3943948k
[ 11.425739] EXT3 FS on dm-0, internal journal
[ 11.562496] loop: module loaded
[ 12.598464] kjournald starting. Commit interval 5 seconds
[ 12.604732] EXT3 FS on md0, internal journal
[ 12.604813] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.746590] EXT4-fs: barriers enabled
[ 12.756503] kjournald2 starting: pid 2346, dev dm-3:8, commit interval 5 seconds
[ 12.792346] EXT4 FS on dm-3, internal journal on dm-3:8
[ 12.792397] EXT4-fs: delayed allocation enabled
[ 12.792446] EXT4-fs: file extents enabled
[ 12.793790] EXT4-fs: mballoc enabled
[ 12.793852] EXT4-fs: mounted filesystem dm-3 with ordered data mode
[ 14.154355] Bridge firewalling registered
[ 14.171840] device eth1 entered promiscuous mode
[ 14.316403] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
[ 14.372077] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
[ 14.373804] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 17.584375] Loading iSCSI transport class v2.0-870.
[ 17.615761] iscsi: registered transport (tcp)
[ 17.682396] iscsi: registered transport (iser)
[ 18.164670] RPC: Registered udp transport module.
[ 18.164738] RPC: Registered tcp transport module.
[ 18.218735] Slow work thread pool: Starting up
[ 18.219138] Slow work thread pool: Ready
[ 18.219236] FS-Cache: Loaded
[ 18.255072] FS-Cache: Netfs 'nfs' registered for caching
[ 18.284829] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 24.488011] br0: no IPv6 routers present
[ 27.149010] torbr: no IPv6 routers present
[ 81.434840] virbr1: starting userspace STP failed, starting kernel STP
[ 81.472513] svc: failed to register lockdv1 RPC service (errno 97).
[ 81.473363] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 81.488227] NFSD: starting 90-second grace period
[ 81.570257] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 83.783962] tun: Universal TUN/TAP device driver, 1.6
[ 83.784021] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 83.786806] device vnet0 entered promiscuous mode
[ 83.788268] br0: port 2(vnet0) entering learning state
[ 83.887654] br0: port 2(vnet0) entering disabled state
[ 83.902340] device vnet0 left promiscuous mode
[ 83.902394] br0: port 2(vnet0) entering disabled state
[ 84.104444] lo: Disabled Privacy Extensions
[ 92.228010] virbr1: no IPv6 routers present
[ 99.565802] sata_mv 0000:04:04.0: version 1.28
[ 99.566298] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17
[ 99.566353] alloc irq_desc for 17 on cpu 0 node 0
[ 99.566355] alloc kstat_irqs on cpu 0 node 0
[ 99.566365] sata_mv 0000:04:04.0: PCI INT A -> Link[LNED] -> GSI 17 (level, low) -> IRQ 17
[ 99.566667] sata_mv 0000:04:04.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx
[ 99.567664] scsi4 : sata_mv
[ 99.567804] scsi5 : sata_mv
[ 99.567910] scsi6 : sata_mv
[ 99.569475] scsi7 : sata_mv
[ 99.569775] scsi8 : sata_mv
[ 99.570029] scsi9 : sata_mv
[ 99.570282] scsi10 : sata_mv
[ 99.570528] scsi11 : sata_mv
[ 99.570626] ata5: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe22000 irq 17
[ 99.570697] ata6: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe24000 irq 17
[ 99.570767] ata7: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe26000 irq 17
[ 99.570838] ata8: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe28000 irq 17
[ 99.570908] ata9: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe32000 irq 17
[ 99.570979] ata10: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe34000 irq 17
[ 99.571049] ata11: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe36000 irq 17
[ 99.571121] ata12: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe38000 irq 17
[ 100.044032] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 100.076049] ata5.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133
[ 100.076104] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 100.092063] ata5.00: configured for UDMA/133
[ 100.092195] scsi 4:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
[ 100.092406] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 100.092536] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 100.092617] sd 4:0:0:0: [sdb] Write Protect is off
[ 100.092670] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 100.092690] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 100.092855] sdb:<6>ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 100.608048] ata6.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 100.608104] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 100.640076] ata6.00: configured for UDMA/133
[ 100.640207] scsi 5:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 100.640436] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 100.640457] sd 5:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 100.640472] sd 5:0:0:0: [sdc] Write Protect is off
[ 100.640474] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 100.640494] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 100.640639] sdc:<6>ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 101.160047] ata7.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 101.160102] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 101.192062] ata7.00: configured for UDMA/133
[ 101.192202] scsi 6:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 101.192406] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 101.192533] sd 6:0:0:0: [sdd] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 101.192614] sd 6:0:0:0: [sdd] Write Protect is off
[ 101.192667] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 101.192686] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 101.192847] sdd:<6>ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 101.716049] ata8.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 101.716105] ata8.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 101.748062] ata8.00: configured for UDMA/133
[ 101.748216] scsi 7:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 101.748424] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 101.748553] sd 7:0:0:0: [sde] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 101.748634] sd 7:0:0:0: [sde] Write Protect is off
[ 101.748685] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 101.748703] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 101.748864] sde:<6>ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 102.240056] ata9.00: ATA-7: WDC WD5000AAKS-65TMA0, 12.01C01, max UDMA/133
[ 102.240113] ata9.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 102.264068] ata9.00: configured for UDMA/133
[ 102.264204] scsi 8:0:0:0: Direct-Access ATA WDC WD5000AAKS-6 12.0 PQ: 0 ANSI: 5
[ 102.264417] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 102.264483] sd 8:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 102.264569] sd 8:0:0:0: [sdf] Write Protect is off
[ 102.264621] sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 102.264640] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 102.264808] sdf:<6>ata10: SATA link down (SStatus 0 SControl 300)
[ 102.904029] ata11: SATA link down (SStatus 0 SControl 300)
[ 103.224028] ata12: SATA link down (SStatus 0 SControl 300)
[ 130.831002] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 130.831051] ata5.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 130.831052] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 130.831136] ata5.00: status: { DRDY }
[ 130.831173] ata5: hard resetting link
[ 130.846621] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 130.846665] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 130.846666] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 130.846749] ata6.00: status: { DRDY }
[ 130.846784] ata6: hard resetting link
[ 131.312030] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 131.320363] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 131.352101] ata5.00: configured for UDMA/133
[ 131.352142] ata5: EH complete
[ 131.384062] ata6.00: configured for UDMA/133
[ 131.384102] ata6: EH complete
[ 131.845963] ata7.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 131.845976] ata8.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 131.845985] ata8.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 131.845986] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 131.845988] ata8.00: status: { DRDY }
[ 131.845993] ata8: hard resetting link
[ 131.846199] ata7.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 131.846201] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 131.846284] ata7.00: status: { DRDY }
[ 131.846320] ata7: hard resetting link
[ 132.320034] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 132.324031] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 132.392064] ata8.00: configured for UDMA/133
[ 132.392112] ata8: EH complete
[ 132.396063] ata7.00: configured for UDMA/133
[ 132.396104] ata7: EH complete
[ 132.830995] ata9.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 132.831041] ata9.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 132.831042] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 132.831167] ata9.00: status: { DRDY }
[ 132.831217] ata9: hard resetting link
[ 133.304030] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 133.344066] ata9.00: configured for UDMA/133
[ 133.344106] ata9: EH complete
[ 161.831033] ata5.00: NCQ disabled due to excessive errors
[ 161.831104] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 161.831164] ata5.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 161.831165] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 161.831302] ata5.00: status: { DRDY }
[ 161.831353] ata5: hard resetting link
[ 161.846816] ata6.00: NCQ disabled due to excessive errors
[ 161.846868] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 161.846926] ata6.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 161.846927] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 161.847066] ata6.00: status: { DRDY }
[ 161.847116] ata6: hard resetting link
[ 162.316029] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 162.320045] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 162.356062] ata5.00: configured for UDMA/133
[ 162.356124] ata5: EH complete
[ 162.396061] ata6.00: configured for UDMA/133
[ 162.396115] ata6: EH complete
[ 162.833968] ata8.00: NCQ disabled due to excessive errors
[ 162.833972] ata7.00: NCQ disabled due to excessive errors
[ 162.833976] ata7.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 162.833982] ata7.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 162.833983] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 162.833985] ata7.00: status: { DRDY }
[ 162.833988] ata7: hard resetting link
[ 162.834361] ata8.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 162.834424] ata8.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 162.834426] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 162.834564] ata8.00: status: { DRDY }
[ 162.834616] ata8: hard resetting link
[ 163.308030] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 163.312032] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 163.380065] ata8.00: configured for UDMA/133
[ 163.380125] ata8: EH complete
[ 163.384064] ata7.00: configured for UDMA/133
[ 163.384116] ata7: EH complete
[ 163.830991] ata9.00: NCQ disabled due to excessive errors
[ 163.831044] ata9.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 163.831103] ata9.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 163.831104] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 163.831240] ata9.00: status: { DRDY }
[ 163.831290] ata9: hard resetting link
[ 164.304027] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 164.344066] ata9.00: configured for UDMA/133
[ 164.344119] ata9: EH complete
Attachment:
signature.asc
Description: Digital signature
