Linux IDE Archive

• Thread Index

• Device ICH7 for ahci driver
  • From: ygosset
• Re: [PATCH v1 0/2]ata: Fix the dma state machine lockup for APM X-Gene SoC
  • From: Ming Lei
• Re: [PATCH 1/2] ahci: Check and set 64-bit DMA mask for platform AHCI driver
  • From: Hans de Goede
• [PATCH v2 2/3] ata: Add Qualcomm ARM SoC AHCI SATA host controller driver
  • From: Kumar Gala
• [PATCH v2 1/2] phy: qcom: Add driver for QCOM IPQ806x SATA PHY
  • From: Kumar Gala
• Re: [PATCH 2/3] ata: Add Qualcomm ARM SoC AHCI SATA host controller driver
  • From: Kumar Gala
• Re: [PATCH 2/3] ata: Add Qualcomm ARM SoC AHCI SATA host controller driver
  • From: Stanimir Varbanov
• Re: [PATCH 1/2] ahci: Check and set 64-bit DMA mask for platform AHCI driver
  • From: Suravee Suthikulanit
• Re: [PATCH 1/2] ahci: Check and set 64-bit DMA mask for platform AHCI driver
  • From: Hans de Goede
• Re: [PATCH v1 0/2]ata: Fix the dma state machine lockup for APM X-Gene SoC
  • From: Ming Lei
• Re: [PATCH 2/3] ata: Add Qualcomm ARM SoC AHCI SATA host controller driver
  • From: Kumar Gala
• Re: [PATCH 1/2] phy: qcom: Add driver for QCOM IPQ806x SATA PHY
  • From: Stephen Boyd
• Re: [PATCH 2/3] ata: Add Qualcomm ARM SoC AHCI SATA host controller driver
  • From: Stephen Boyd
• [PATCH 2/2] phy: qcom: Add device tree bindings information
  • From: Kumar Gala
• [PATCH 1/2] phy: qcom: Add driver for QCOM IPQ806x SATA PHY
  • From: Kumar Gala
• [PATCH 2/3] ata: Add Qualcomm ARM SoC AHCI SATA host controller driver
  • From: Kumar Gala
• [PATCH 3/3] ata: qcom: Add device tree bindings information
  • From: Kumar Gala
• [PATCH 1/3] ahci-platform: Bump max number of clocks to 5
  • From: Kumar Gala
• [PATCH 0/2] ahci: Add support for 64-bit DMA mask driver
  • From: suravee.suthikulpanit
• Re: [PATCH 1/2] ahci: Check and set 64-bit DMA mask for platform AHCI driver
  • From: Sergei Shtylyov
• [PATCH 2/2] ahci/xgene: Remove logic to set 64-bit DMA mask
  • From: suravee.suthikulpanit
• [PATCH 1/2] ahci: Check and set 64-bit DMA mask for platform AHCI driver
  • From: suravee.suthikulpanit
• [PATCH v1 0/2]ata: Fix the dma state machine lockup for APM X-Gene SoC
  • From: Suman Tripathi
• [PATCH v1 2/2] ata: Fix the dma state machine lockup for the PIO mode commands.
  • From: Suman Tripathi
• [PATCH v1 1/2] libahci: Implement the function ahci_restart_engine to restart the port dma engine.
  • From: Suman Tripathi
• Re: [PATCH 1/1] ata: Check and set 64-bit DMA mask for platform AHCI driver
  • From: Suravee Suthikulpanit
• Re: [PATCH 1/1] ata: Check and set 64-bit DMA mask for platform AHCI driver
  • From: Suravee Suthikulpanit
• Re: [PATCH v2 2/3] lib: glob.c: Add CONFIG_GLOB_SELFTEST
  • From: George Spelvin
• Re: [PATCH v2 2/3] lib: glob.c: Add CONFIG_GLOB_SELFTEST
  • From: Andrew Morton
• Re: [PATCH 1/1] ata: Check and set 64-bit DMA mask for platform AHCI driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/1] ata: Check and set 64-bit DMA mask for platform AHCI driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v5 0/7] ARM: berlin: add AHCI support
  • From: Antoine Ténart
• Re: [PATCH 1/1] ata: Check and set 64-bit DMA mask for platform AHCI driver
  • From: David Milburn
• [PATCH 3.13 071/160] ahci: Do not receive interrupts sent by dummy ports
  • From: Kamal Mostafa
• [3.13.y.z extended stable] Patch "ahci: Do not receive interrupts sent by dummy ports" has been added to staging queue
  • From: Kamal Mostafa
• Re: [PATCH] ahci: disable ncq feature for hisilicon sata
  • From: Hans de Goede
• [PATCH 1/3] PCI/MSI: Add pci_enable_msi_partial()
  • From: Alexander Gordeev
• [PATCH 0/3] Add pci_enable_msi_partial() to conserve MSI-related resources
  • From: Alexander Gordeev
• [PATCH 2/3] PCI/MSI/x86: Support pci_enable_msi_partial()
  • From: Alexander Gordeev
• [PATCH 3/3] AHCI: Use pci_enable_msi_partial() to conserve on 10/16 MSIs
  • From: Alexander Gordeev
• Re: [PATCH] ahci: disable ncq feature for hisilicon sata
  • From: kefeng.wang
• [PATCH] ahci: disable ncq feature for hisilicon sata
  • From: kefeng.wang
• Re: [PATCH 0/9] Serial ATA support for NVIDIA Tegra124
  • From: Mikko Perttunen
• Re: [PATCH 0/9] Serial ATA support for NVIDIA Tegra124
  • From: Stephen Warren
• [GIT PULL] libata changes for v3.16-rc1
  • From: Tejun Heo
• [PATCH v2 3/3] libata: Use glob_match from lib/glob.c
  • From: George Spelvin
• [PATCH v2 2/3] lib: glob.c: Add CONFIG_GLOB_SELFTEST
  • From: George Spelvin
• [PATCH v2 1/3] Add lib/glob.c
  • From: George Spelvin
• Re: [PATCH v0 2/2] ata: Fix the dma state machine lockup for the PIO mode commands.
  • From: Tejun Heo
• Re: [PATCH v0 1/2] libahci: Implement the function restart_engine to restart the port dma engine.
  • From: Tejun Heo
• [PATCH v0 2/2] ata: Fix the dma state machine lockup for the PIO mode commands.
  • From: Suman Tripathi
• [PATCH v0 1/2] libahci: Implement the function restart_engine to restart the port dma engine.
  • From: Suman Tripathi
• [PATCH v0 0/2]ata: Fix the dma state machine lockup for APM X-Gene SoC
  • From: Suman Tripathi
• Re: [boot regression PATCH] libata: allow xgene-ahci to opt-out of tag ordered submission
  • From: Dan Williams
• Re: [PATCH RFC 5/5] ahci_imx: add disable for spread-spectrum
  • From: Rob Herring
• Re: [PATCH RFC 5/5] ahci_imx: add disable for spread-spectrum
  • From: Russell King - ARM Linux
• Re: [PATCH 1/1] ata: Check and set 64-bit DMA mask for platform AHCI driver
  • From: Suravee Suthikulanit
• [boot regression PATCH] libata: allow xgene-ahci to opt-out of tag ordered submission
  • From: Dan Williams
• [PATCH] libahci_platform: Fail when PHY required but PHY support disabled
  • From: Mikko Perttunen
• Re: [PATCH 0/9] Serial ATA support for NVIDIA Tegra124
  • From: Mikko Perttunen
• Re: [PATCH 0/9] Serial ATA support for NVIDIA Tegra124
  • From: Thierry Reding
• Re: [PATCH 0/9] Serial ATA support for NVIDIA Tegra124
  • From: Mikko Perttunen
• Re: [PATCH 0/9] Serial ATA support for NVIDIA Tegra124
  • From: Stephen Warren
• Re: [PATCH 8/9] ata: Add support for the Tegra124 SATA controller
  • From: Mikko Perttunen
• Re: [PATCH 8/9] ata: Add support for the Tegra124 SATA controller
  • From: Rob Herring
• [PATCH 2/9] ARM: tegra: Add SATA controller to Tegra124 device tree
  • From: Mikko Perttunen
• [PATCH 1/9] of: Add NVIDIA Tegra SATA controller binding
  • From: Mikko Perttunen
• [PATCH 3/9] ARM: tegra: Add SATA and SATA power to Jetson TK1 device tree
  • From: Mikko Perttunen
• [PATCH 4/9] clk: tegra: Enable hardware control of SATA PLL
  • From: Mikko Perttunen
• [PATCH 5/9] clk: tegra: Add SATA clocks to Tegra124 initialization table
  • From: Mikko Perttunen
• [PATCH 7/9] ahci: Increase AHCI_MAX_CLKS to 4
  • From: Mikko Perttunen
• [PATCH 9/9] ARM: tegra: Add options for Tegra AHCI support to tegra_defconfig
  • From: Mikko Perttunen
• [PATCH 8/9] ata: Add support for the Tegra124 SATA controller
  • From: Mikko Perttunen
• [PATCH 6/9] ARM: tegra: Export tegra_powergate_power_on
  • From: Mikko Perttunen
• [PATCH 0/9] Serial ATA support for NVIDIA Tegra124
  • From: Mikko Perttunen
• Re: [PATCH 1/3] libsas: modify SATA error handler
  • From: Dan Williams
• Re: [PATCH] ahci: Add Device ID for HighPoint RocketRaid 642L
  • From: Tejun Heo
• [PATCH] ahci: Add Device ID for HighPoint RocketRaid 642L
  • From: Jérôme Carretero
• Re: [PATCH] ahci: Add Device ID for HighPoint RocketRaid 642L
  • From: Tejun Heo
• Re: [PATCH] ahci: Add Device ID for HighPoint RocketRaid 642L
  • From: Jérôme Carretero
• Re: [PATCH] ahci: Add Device ID for HighPoint RocketRaid 642L
  • From: Tejun Heo
• Re: [PATCH] ahci: Add Device ID for HighPoint RocketRaid 642L
  • From: Tejun Heo
• Re: [PATCH 1/1] ata: Check and set 64-bit DMA mask for platform AHCI driver
  • From: Tejun Heo
• Re: [PATCH 1/3] libsas: modify SATA error handler
  • From: Dan Williams
• RE: [PATCH 1/3] libsas: modify SATA error handler
  • From: Xiangliang Yu
• Re: Linux Hibernation with sata driver
  • From: AYAN KUMAR HALDER
• Fwd: Linux Hibernation with sata driver
  • From: AYAN KUMAR HALDER
• Re: Candidate for late revert ?
  • From: Martin K. Petersen
• Re: Candidate for late revert ?
  • From: Tejun Heo
• Re: Candidate for late revert ?
  • From: Martin K. Petersen
• Re: Candidate for late revert ?
  • From: Tejun Heo
• Re: [PATCH 1/1] ata: Check and set 64-bit DMA mask for platform AHCI driver
  • From: Suravee Suthikulpanit
• Re: Bad DMA from Marvell 9230
  • From: Roger Heflin
• Re: Bad DMA from Marvell 9230
  • From: Benjamin Herrenschmidt
• Re: Bad DMA from Marvell 9230
  • From: Benjamin Herrenschmidt
• Re: Bad DMA from Marvell 9230
  • From: Jérôme Carretero
• Re: Bad DMA from Marvell 9230
  • From: Roger Heflin
• Re: Bad DMA from Marvell 9230
  • From: Jérôme Carretero
• Re: Bad DMA from Marvell 9230
  • From: Benjamin Herrenschmidt
• Re: [PATCH] ahci: imx: manage only sata_ref_clk in imx_sata_enable[disable]
  • From: Hans de Goede
• Re: Bad DMA from Marvell 9230
  • From: Jérôme Carretero
• [PATCH] ahci: Add Device ID for HighPoint RocketRaid 642L
  • From: Jérôme Carretero
• Re: [PATCH] ahci: imx: manage only sata_ref_clk in imx_sata_enable[disable]
  • From: Fabio Estevam
• Re: [PATCH] ahci: imx: manage only sata_ref_clk in imx_sata_enable[disable]
  • From: Hans de Goede
• Re: [PATCH] ahci: imx: manage only sata_ref_clk in imx_sata_enable[disable]
  • From: Fabio Estevam
• Re: [PATCH] ahci: imx: manage only sata_ref_clk in imx_sata_enable[disable]
  • From: Fabio Estevam
• Re: [PATCH] ahci: imx: manage only sata_ref_clk in imx_sata_enable[disable]
  • From: Hans de Goede
• [PATCH] ahci: imx: manage only sata_ref_clk in imx_sata_enable[disable]
  • From: Shawn Guo
• Re: [PATCH] ahci: add PCI ID for Marvell 88SE91A0 SATA Controller
  • From: Tejun Heo
• Re: [PATCH] ahci: imx: Fix imx_ahci_resume()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ahci: imx: Fix imx_ahci_resume()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ahci: imx: Fix imx_ahci_resume()
  • From: Shawn Guo
• [PATCH] ahci: imx: Fix imx_ahci_resume()
  • From: Fabio Estevam
• Re: [PATCH] ahci: imx: PLL clock needs 100us to settle down
  • From: Fabio Estevam
• [PATCH v5 1/7] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• [PATCH v5 2/7] Documentation: bindings: add the Berlin SATA PHY
  • From: Antoine Ténart
• [PATCH v5 6/7] ARM: berlin: add the AHCI node for the BG2Q
  • From: Antoine Ténart
• [PATCH v5 5/7] Documentation: bindings: document the sub-nodes AHCI bindings
  • From: Antoine Ténart
• [PATCH v5 7/7] ARM: berlin: enable the eSATA interface on the BG2Q DMP
  • From: Antoine Ténart
• [PATCH v5 3/7] ata: libahci: allow to use multiple PHYs
  • From: Antoine Ténart
• [PATCH v5 4/7] ata: ahci_platform: add a generic AHCI compatible
  • From: Antoine Ténart
• [PATCH v5 0/7] ARM: berlin: add AHCI support
  • From: Antoine Ténart
• Re: [PATCH] ahci: imx: PLL clock needs 100us to settle down
  • From: Shawn Guo
• Re: [PATCH] ahci: imx: PLL clock needs 100us to settle down
  • From: Fabio Estevam
• [PATCH] ahci: add PCI ID for Marvell 88SE91A0 SATA Controller
  • From: Andreas Schrägle
• [PATCH 1/1] ata: Check and set 64-bit DMA mask for platform AHCI driver
  • From: suravee.suthikulpanit
• Re: ahci: host/target numbers change with detection order
  • From: Alan Evans
• Re: [PATCH] sata_fsl: remove check for CONFIG_MPC8315_DS
  • From: Tejun Heo
• [PATCH] sata_fsl: remove check for CONFIG_MPC8315_DS
  • From: Paul Bolle
• Re: ahci: host/target numbers change with detection order
  • From: Phillip Susi
• Re: [PATCH v4 1/7] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• Re: [PATCH v4 1/7] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• Re: [PATCH v4 1/7] phy: add a driver for the Berlin SATA PHY
  • From: Andrew Lunn
• Re: [PATCH v4 1/7] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• Re: [PATCH v4 1/7] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• Re: [PATCH v4 1/7] phy: add a driver for the Berlin SATA PHY
  • From: Andrew Lunn
• Re: [PATCH v4 1/7] phy: add a driver for the Berlin SATA PHY
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v4 4/7] ata: ahci_platform: add the Marvell Berlin AHCI compatible
  • From: Antoine Ténart
• Re: [PATCH v4 4/7] ata: ahci_platform: add the Marvell Berlin AHCI compatible
  • From: Sebastian Hesselbarth
• Re: [PATCH v4 1/7] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• Re: [PATCH v4 1/7] phy: add a driver for the Berlin SATA PHY
  • From: Sebastian Hesselbarth
• [PATCH v4 2/7] Documentation: bindings: add the Berlin SATA PHY
  • From: Antoine Ténart
• [PATCH v4 1/7] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• [PATCH v4 4/7] ata: ahci_platform: add the Marvell Berlin AHCI compatible
  • From: Antoine Ténart
• [PATCH v4 3/7] ata: libahci: allow to use multiple PHYs
  • From: Antoine Ténart
• [PATCH v4 6/7] ARM: berlin: add the AHCI node for the BG2Q
  • From: Antoine Ténart
• [PATCH v4 5/7] Documentation: bindings: document the sub-nodes AHCI bindings
  • From: Antoine Ténart
• [PATCH v4 7/7] ARM: berlin: enable the eSATA interface on the BG2Q DMP
  • From: Antoine Ténart
• [PATCH v4 0/7] ARM: berlin: add AHCI support
  • From: Antoine Ténart
• ahci: host/target numbers change with detection order
  • From: Alan Evans
• Re: [PATCH] ahci: imx: PLL clock needs 100us to settle down
  • From: Tejun Heo
• Re: [PATCH] ahci: imx: PLL clock needs 100us to settle down
  • From: Shawn Guo
• Re: [PATCH] ahci: imx: PLL clock needs 100us to settle down
  • From: Fabio Estevam
• [PATCH] ahci: imx: PLL clock needs 100us to settle down
  • From: Shawn Guo
• Re: [PATCH RFC 05/11] ata: Remove ARCH_KIRKWOOD dependency
  • From: Tejun Heo
• [PATCH RFC 05/11] ata: Remove ARCH_KIRKWOOD dependency
  • From: Andrew Lunn
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Kishon Vijay Abraham I
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Sebastian Hesselbarth
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Kishon Vijay Abraham I
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Sebastian Hesselbarth
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Kishon Vijay Abraham I
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Kishon Vijay Abraham I
• Re: understanding non fis based switching
  • From: Phillip Susi
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Arnd Bergmann
• uClinux booting with 64GByte Swiss Bit Compact Flash irq 7: nobody cared (try booting with the "irqpoll" option)
  • From: Janet Estabridis
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Sebastian Hesselbarth
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Arnd Bergmann
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Sebastian Hesselbarth
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Arnd Bergmann
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Sebastian Hesselbarth
• Re: [PATCH v6 0/3] ahci: add support for hisilicon sata
  • From: Tejun Heo
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Arnd Bergmann
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Arnd Bergmann
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Arnd Bergmann
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• Re: [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Kishon Vijay Abraham I
• [PATCH v3 4/6] Documentation: bindings: add the berlin-ahci compatible to the ahci platform
  • From: Antoine Ténart
• [PATCH v3 3/6] ata: ahci: add AHCI support for the Berlin BG2Q
  • From: Antoine Ténart
• [PATCH v3 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• [PATCH v3 2/6] Documentation: bindings: add the Berlin SATA PHY
  • From: Antoine Ténart
• [PATCH v3 6/6] ARM: berlin: enable the eSATA interface on the BG2Q DMP
  • From: Antoine Ténart
• [PATCH v3 5/6] ARM: berlin: add the AHCI node for the BG2Q
  • From: Antoine Ténart
• [PATCH v3 0/6] ARM: berlin: add AHCI support
  • From: Antoine Ténart
• [PATCH v7 0/3] ahci: add support for hisilicon sata
  • From: Kefeng Wang
• [PATCH v7 2/3] libahci_platform: add host_flags parameter in ahci_platform_init_host()
  • From: Kefeng Wang
• [PATCH v7 3/3] ahci: add support for Hisilicon sata
  • From: Kefeng Wang
• [PATCH v7 1/3] ata: ahci: append new hflag AHCI_HFLAG_NO_FBS
  • From: Kefeng Wang
• Re: [PATCH v6 3/3] ahci: add support for Hisilicon sata
  • From: kefeng.wang
• Re: Performance issue with port multiplier
  • From: Phillip Susi
• Re: [PATCH v6 3/3] ahci: add support for Hisilicon sata
  • From: Tejun Heo
• [GIT PULL RESEND] libata fixes for v3.15-rc5
  • From: Tejun Heo
• Re: [PATCH v2 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• Re: [PATCH v2 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• Re: [PATCH v2 3/6] ata: ahci: add AHCI support for the Berlin BG2Q
  • From: Antoine Ténart
• [PATCH 3.12 150/182] ahci: Do not receive interrupts sent by dummy ports
  • From: Jiri Slaby
• [patch added to the 3.12 stable tree] ahci: Do not receive interrupts sent by dummy ports
  • From: Jiri Slaby
• [patch NOT added to the 3.12 stable tree] ahci: Ensure "MSI Revert to Single Message" mode is not enforced
  • From: Jiri Slaby
• Re: [PATCH v2 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Kishon Vijay Abraham I
• Re: [PATCH 1/2] Add lib/glob.c
  • From: Andrew Morton
• [GIT PULL] libata fixes for v3.15-rc5
  • From: Tejun Heo
• Re: [PATCH v2 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Sebastian Hesselbarth
• Re: [PATCH v2 3/6] ata: ahci: add AHCI support for the Berlin BG2Q
  • From: Andrew Lunn
• Re: [PATCH v2 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Kishon Vijay Abraham I
• [PATCH v2 1/6] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• [PATCH v2 2/6] Documentation: bindings: add the Berlin SATA PHY
  • From: Antoine Ténart
• [PATCH v2 5/6] ARM: berlin: add the AHCI node for the BG2Q
  • From: Antoine Ténart
• [PATCH v2 4/6] Documentation: bindings: add the berlin-ahci compatible to the ahci platform
  • From: Antoine Ténart
• [PATCH v2 3/6] ata: ahci: add AHCI support for the Berlin BG2Q
  • From: Antoine Ténart
• [PATCH v2 6/6] ARM: berlin: enable the eSATA interface on the BG2Q DMP
  • From: Antoine Ténart
• [PATCH v2 0/6] ARM: berlin: add AHCI support
  • From: Antoine Ténart
• [PATCH 3.14 36/83] ahci: Ensure "MSI Revert to Single Message" mode is not enforced
  • From: Greg Kroah-Hartman
• [PATCH 3.14 37/83] ahci: Do not receive interrupts sent by dummy ports
  • From: Greg Kroah-Hartman
• Re: [PATCH 1/2] Add lib/glob.c
  • From: Tejun Heo
• Re: [PATCH 1/2] Add lib/glob.c
  • From: George Spelvin
• Re: [PATCH 1/2] Add lib/glob.c
  • From: Randy Dunlap
• Re: [PATCH 1/2] Add lib/glob.c
  • From: Randy Dunlap
• Re: [PATCH 1/2] Add lib/glob.c
  • From: George Spelvin
• Re: [PATCH 1/2] Add lib/glob.c
  • From: Tejun Heo
• Re: [PATCH 1/2] Add lib/glob.c
  • From: Tejun Heo
• [PATCH 2/2] libata: Use glob_match from lib/glob.c
  • From: George Spelvin
• [PATCH 1/2] Add lib/glob.c
  • From: George Spelvin
• Re: [PATCH v2] ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
  • From: Tejun Heo
• Re: [PATCH 00/22] Random ARM randconfig fixes in drivers
  • From: Arnd Bergmann
• Re: Disk shock protection interferes with standby timers, please advise
  • From: Elias Oltmanns
• Re: [PATCH 00/22] Random ARM randconfig fixes in drivers
  • From: Guenter Roeck
• Re: [PATCH] ata: pata_at91 only works on sam9
  • From: Tejun Heo
• [PATCH] ata: pata_at91 only works on sam9
  • From: Arnd Bergmann
• [PATCH 00/22] Random ARM randconfig fixes in drivers
  • From: Arnd Bergmann
• [PATCH v2] ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3.11 15/70] ahci: Do not receive interrupts sent by dummy ports
  • From: Luis Henriques
• Re: [PATCH] libata: clean up ZPODD when a port is detached
  • From: Tejun Heo
• Re: [PATCH] libata-sff: remove dead code
  • From: Paul Bolle
• Re: [PATCH] libata-sff: remove dead code
  • From: Alan Cox
• Re: [PATCH] libata-sff: remove dead code
  • From: Paul Bolle
• Re: [PATCH] libata-sff: remove dead code
  • From: Alan Cox
• [PATCH] libata: clean up ZPODD when a port is detached
  • From: Levente Kurusa
• Re: [PATCHv3 5/5] ARM: configs: add ahci_mvebu to multi_v7_defconfig
  • From: Jason Cooper
• Re: Using ftrace to identify source of excessive latency of USB write
  • From: Mason
• Re: [PATCH] ahci: unregister acpi notify handler when a ZPODD is unbound
  • From: Aaron Lu
• Re: [PATCH] ahci: unregister acpi notify handler when a ZPODD is unbound
  • From: Levente Kurusa
• Re: [PATCH] ahci: unregister acpi notify handler when a ZPODD is unbound
  • From: Aaron Lu
• Re: [PATCH] ahci: unregister acpi notify handler when a ZPODD is unbound
  • From: Levente Kurusa
• Re: [PATCH] ahci: unregister acpi notify handler when a ZPODD is unbound
  • From: Aaron Lu
• Re: [PATCHv3 5/5] ARM: configs: add ahci_mvebu to multi_v7_defconfig
  • From: Thomas Petazzoni
• Re: [PATCHv3 5/5] ARM: configs: add ahci_mvebu to multi_v7_defconfig
  • From: Olof Johansson
• Re: [PATCH v6 0/3] ahci: add support for hisilicon sata
  • From: kefeng.wang
• Re: [PATCHv3 2/5] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
  • From: Tejun Heo
• Re: [PATCHv3 1/5] Documentation: dt-bindings: reformat and order list of ahci-platform compatibles
  • From: Tejun Heo
• Re: [PATCH v3 0/2] ahci: imx: software workaround for phy reset issue
  • From: Tejun Heo
• [PATCH v3 0/2] ahci: imx: software workaround for phy reset issue
  • From: Shawn Guo
• [PATCH v3 1/2] ahci: imx: add namespace for register enums
  • From: Shawn Guo
• [PATCH v3 2/2] ahci: imx: software workaround for phy reset issue in resume
  • From: Shawn Guo
• [PATCH] libata-sff: remove dead code
  • From: Paul Bolle
• Re: Disk shock protection interferes with standby timers, please advise
  • From: Tomáš Janoušek
• Re: [PATCH v2 1/2] ahci: imx: add namespace for register enums
  • From: Tejun Heo
• Re: [PATCH 0/3] libsas: add support for port multiplier
  • From: Dan Williams
• Re: [PATCH 0/3] libsas: add support for port multiplier
  • From: Tejun Heo
• Re: [PATCHv3 2/5] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
  • From: Thomas Petazzoni
• Re: [PATCHv3 2/5] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
  • From: Tejun Heo
• Re: [PATCHv2] ata: SATL compliance for Inquiry Product Revision
  • From: Tejun Heo
• [PATCHv2] ata: SATL compliance for Inquiry Product Revision
  • From: Keith Busch
• Re: [PATCH] ata: SATL compliance for Inquiry Product Revision
  • From: Keith Busch
• Re: [PATCH] ata: SATL compliance for Inquiry Product Revision
  • From: Tejun Heo
• Re: [PATCH] ahci: unregister acpi notify handler when a ZPODD is unbound
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ahci: unregister acpi notify handler when a ZPODD is unbound
  • From: Levente Kurusa
• [3.11.y.z extended stable] Patch "ahci: Do not receive interrupts sent by dummy ports" has been added to staging queue
  • From: Luis Henriques
• [PATCH] ata: SATL compliance for Inquiry Product Revision
  • From: Keith Busch
• Re: [PATCH v18 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver
  • From: Felipe Balbi
• Re: [PATCH v18 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver
  • From: Loc Ho
• Using ftrace to identify source of excessive latency of USB write
  • From: Mason
• Re: [PATCHv3 4/5] ARM: configs: add ahci_mvebu to mvebu_v7_defconfig
  • From: Jason Cooper
• Re: [PATCHv3 3/5] ARM: mvebu: add Device Tree description of AHCI interfaces on Armada 38x
  • From: Jason Cooper
• Re: [PATCHv3 5/5] ARM: configs: add ahci_mvebu to multi_v7_defconfig
  • From: Jason Cooper
• Re: [PATCHv3 1/5] Documentation: dt-bindings: reformat and order list of ahci-platform compatibles
  • From: Jason Cooper
• Re: [PATCHv3 2/5] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
  • From: Jason Cooper
• Re: [PATCH v6 0/3] ahci: add support for hisilicon sata
  • From: Hans de Goede
• Re: [PATCH v5 0/3] ahci: add support for hisilicon sata
  • From: kefeng.wang
• [PATCH v6 1/3] ata: ahci: append new hflag AHCI_HFLAG_NO_FBS
  • From: Kefeng Wang
• [PATCH v6 2/3] libahci_platform: add host_flags parameter in ahci_platform_init_host()
  • From: Kefeng Wang
• [PATCH v6 3/3] ahci: add support for Hisilicon sata
  • From: Kefeng Wang
• [PATCH v6 0/3] ahci: add support for hisilicon sata
  • From: Kefeng Wang
• Re: [PATCH v2] ahci: disable DEVSLP for Intel Valleyview
  • From: Tejun Heo
• [PATCH 0/3] libsas: add support for port multiplier
  • From: Xiangliang Yu
• [PATCH 3/3] mvsas: implement port mulitplier functional interface
  • From: Xiangliang Yu
• [PATCH 2/3] libsas: add support for SATA port multiplier(PM)
  • From: Xiangliang Yu
• [PATCH 1/3] libsas: modify SATA error handler
  • From: Xiangliang Yu
• Re: [PATCH v5 0/3] ahci: add support for hisilicon sata
  • From: Tejun Heo
• Re: [PATCH 1/6] ata: ahci: add AHCI support for Berlin SoCs
  • From: Antoine Ténart
• Re: [PATCH 1/6] ata: ahci: add AHCI support for Berlin SoCs
  • From: Jisheng Zhang
• Performance issue with port multiplier
  • From: Phillip Susi
• [GIT PULL] libata fixes for v3.15-rc2
  • From: Tejun Heo
• Re: [PATCH v5 0/3] ahci: add support for hisilicon sata
  • From: Tejun Heo
• Re: [PATCH v5 0/3] ahci: add support for hisilicon sata
  • From: Hans de Goede
• [PATCH v5 0/3] ahci: add support for hisilicon sata
  • From: Kefeng Wang
• [PATCH v5 1/3] ata: ahci: append new hflag AHCI_HFLAG_NO_FBS
  • From: Kefeng Wang
• [PATCH v5 3/3] ahci: add support for Hisilicon sata
  • From: Kefeng Wang
• [PATCH v5 2/3] libahci_platform: add host_flags parameter in ahci_platform_init_host()
  • From: Kefeng Wang
• Re: [PATCH v4 2/3] libahci_platform: add host_flags parameter in ahci_platform_init_host()
  • From: kefeng.wang
• Re: [PATCH v4 2/3] libahci_platform: add host_flags parameter in ahci_platform_init_host()
  • From: Hans de Goede
• [PATCH v4 1/3] ata: ahci: append new hflag AHCI_HFLAG_NO_FBS
  • From: Kefeng Wang
• [PATCH v4 2/3] libahci_platform: add host_flags parameter in ahci_platform_init_host()
  • From: Kefeng Wang
• [PATCH v4 0/3] ahci: add support for hisilicon sata
  • From: Kefeng Wang
• [PATCH v4 3/3] ahci: add support for Hisilicon sata
  • From: Kefeng Wang
• Re: [PATCH 5/6] ARM: berlin: add the AHCI node for the BG2
  • From: Antoine Ténart
• Re: [PATCH 1/6] ata: ahci: add AHCI support for Berlin SoCs
  • From: Antoine Ténart
• Re: [PATCH 1/6] ata: ahci: add AHCI support for Berlin SoCs
  • From: Antoine Ténart
• Re: [PATCH 1/6] ata: ahci: add AHCI support for Berlin SoCs
  • From: Antoine Ténart
• Re: [PATCH 1/6] ata: ahci: add AHCI support for Berlin SoCs
  • From: Antoine Ténart
• Re: [PATCH 5/6] ARM: berlin: add the AHCI node for the BG2
  • From: Jisheng Zhang
• Re: [PATCH 6/6] ARM: berlin: add the AHCI node for the BG2CD
  • From: Jisheng Zhang
• Re: [PATCH 1/6] ata: ahci: add AHCI support for Berlin SoCs
  • From: Andrew Lunn
• Re: [PATCH 1/6] ata: ahci: add AHCI support for Berlin SoCs
  • From: Rob Herring
• Re: [PATCH 1/6] ata: ahci: add AHCI support for Berlin SoCs
  • From: Rob Herring
• Re: [PATCH] [SCSI] esas2r: Fix comment
  • From: Marek Vasut
• Re: [PATCH 3/6] ARM: berlin: add the AHCI node for the BG2Q
  • From: Sebastian Hesselbarth
• Re: [PATCH 2/6] Documentation: bindings: add the berlin-achi compatible to the ahci platform
  • From: Sebastian Hesselbarth
• Re: [PATCH 1/6] ata: ahci: add AHCI support for Berlin SoCs
  • From: Sebastian Hesselbarth
• Re: [PATCH 1/6] ata: ahci: add AHCI support for Berlin SoCs
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/6] ARM: berlin: add the AHCI node for the BG2Q
  • From: Thomas Petazzoni
• Re: [PATCH 3/6] ARM: berlin: add the AHCI node for the BG2Q
  • From: Thomas Petazzoni
• Re: [PATCH 2/6] Documentation: bindings: add the berlin-achi compatible to the ahci platform
  • From: Thomas Petazzoni
• [PATCH 1/6] ata: ahci: add AHCI support for Berlin SoCs
  • From: Antoine Ténart
• [PATCH 0/6] ARM: berlin: add AHCI support
  • From: Antoine Ténart
• [PATCH 4/6] ARM: berlin: enable the eSATA interface on the BG2Q DMP
  • From: Antoine Ténart
• [PATCH 3/6] ARM: berlin: add the AHCI node for the BG2Q
  • From: Antoine Ténart
• [PATCH 6/6] ARM: berlin: add the AHCI node for the BG2CD
  • From: Antoine Ténart
• [PATCH 5/6] ARM: berlin: add the AHCI node for the BG2
  • From: Antoine Ténart
• [PATCH 2/6] Documentation: bindings: add the berlin-achi compatible to the ahci platform
  • From: Antoine Ténart
• Re: [PATCH] [SCSI] esas2r: Fix comment
  • From: Sergei Shtylyov
• [PATCH] [SCSI] esas2r: Fix comment
  • From: Marek Vasut
• Re: [PATCH v3 2/2] ahci: add support for Hisilicon sata
  • From: Hans de Goede
• Re: [PATCH v3 2/2] ahci: add support for Hisilicon sata
  • From: kefeng.wang
• [PATCH v3 2/2] ahci: add support for Hisilicon sata
  • From: Kefeng Wang
• [PATCH v3 1/2] ata: ahci: append new hflag AHCI_HFLAG_NO_FBS
  • From: Kefeng Wang
• [PATCH v3 0/2] ahci: add support for hisilicon sata
  • From: Kefeng Wang
• Re: [PATCH 1/1] ahci: Do not receive interrupts sent by dummy ports
  • From: Tejun Heo
• Re: [PATCH v2] libata/ahci: accommodate tag ordered controllers
  • From: Tejun Heo
• [PATCH 1/2] PHY: Add function set_rate to generic PHY framework
  • From: Suman Tripathi
• [PATCH 1/2] PHY: Add function set_rate to generic PHY framework
  • From: Suman Tripathi
• [PATCH 2/2] PHY: Add Gen1/Gen2 support for the APM SoC X-Gene SATA PHY driver
  • From: Suman Tripathi
• [PATCH 0/2] PHY: Add SATA Gen1/Gen2 support to the APM X-Gene SoC 15Gbps PHY driver
  • From: Suman Tripathi
• [PATCH v2 2/2] ahci: imx: software workaround for phy reset issue in resume
  • From: Shawn Guo
• [PATCH v2 1/2] ahci: imx: add namespace for register enums
  • From: Shawn Guo
• [PATCH v2 0/2] ahci: imx: software workaround for phy reset issue
  • From: Shawn Guo
• How to cleanly detach port multiplier ( pmp )
  • From: Phillip Susi
• Re: [PATCH V2 2/2] ahci: add support for Hisilicon sata
  • From: Kefeng Wang
• [PATCH v2] libata/ahci: accommodate tag ordered controllers
  • From: Dan Williams
• Re: [PATCH RFC 2/5] ata: ahci_imx: avoid reprobing ahci_imx driver when using DT
  • From: Russell King - ARM Linux
• Re: [PATCH 1/1] ahci: Do not receive interrupts sent by dummy ports
  • From: David Milburn
• Re: [PATCH 1/1] ahci: Do not receive interrupts sent by dummy ports
  • From: Tejun Heo
• [PATCH 1/1] ahci: Do not receive interrupts sent by dummy ports
  • From: Alexander Gordeev
• [PATCH 0/1] ahci: Do not receive interrupts sent by dummy ports
  • From: Alexander Gordeev
• Re: [PATCH] libahci: ahci interrupt check for disabled port since private_data may be NULL
  • From: Tejun Heo
• Re: [PATCH] libahci: ahci interrupt check for disabled port since private_data may be NULL
  • From: Alexander Gordeev
• Re: [PATCH v2 0/2] ahci: Tweaks to the driver's PCI function
  • From: Tejun Heo
• Re: [PATCH] libahci: ahci interrupt check for disabled port since private_data may be NULL
  • From: Tejun Heo
• Re: [PATCH] libahci: ahci interrupt check for disabled port since private_data may be NULL
  • From: Alexander Gordeev
• Re: [PATCH v2 0/2] ahci: Tweaks to the driver's PCI function
  • From: Alexander Gordeev
• Re: [PATCH V2 2/2] ahci: add support for Hisilicon sata
  • From: Tejun Heo
• Re: [PATCH] libahci: ahci interrupt check for disabled port since private_data may be NULL
  • From: Tejun Heo
• Re: [PATCH v2 0/2] ahci: Tweaks to the driver's PCI function
  • From: Tejun Heo
• Re: [PATCH 1/2] ahci: Ensure "MSI Revert to Single Message" mode is not enforced
  • From: Alexander Gordeev
• [PATCH v2 1/2] ahci: Ensure "MSI Revert to Single Message" mode is not enforced
  • From: Alexander Gordeev
• [PATCH v2 2/2] ahci: Use pci_enable_msi_exact() instead of pci_enable_msi_range()
  • From: Alexander Gordeev
• [PATCH v2 0/2] ahci: Tweaks to the driver's PCI function
  • From: Alexander Gordeev
• Re: [PATCH RFC 2/5] ata: ahci_imx: avoid reprobing ahci_imx driver when using DT
  • From: Shawn Guo
• Re: [PATCH] libahci: ahci interrupt check for disabled port since private_data may be NULL
  • From: Alexander Gordeev
• Re: [PATCH V2 2/2] ahci: add support for Hisilicon sata
  • From: Hans de Goede
• Re: [PATCH 2/2] ahci: imx: software workaround for phy reset issue in resume
  • From: Shawn Guo
• Re: [PATCH RFC 5/5] ahci_imx: add disable for spread-spectrum
  • From: Russell King - ARM Linux
• Re: [PATCH RFC 5/5] ahci_imx: add disable for spread-spectrum
  • From: Russell King - ARM Linux
• Re: [PATCH RFC 5/5] ahci_imx: add disable for spread-spectrum
  • From: Rob Herring
• Re: [PATCH V2 1/2] ata: ahci: append new hflag AHCI_HFLAG_NO_FBS
  • From: Tejun Heo
• Re: [PATCH V2 2/2] ahci: add support for Hisilicon sata
  • From: Tejun Heo
• Re: [PATCH] libata/ahci: accommodate tag ordered controllers
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: Expose trim capability in sysfs
  • From: Tejun Heo
• Re: [PATCH 2/2] ahci: Use pci_enable_msi_exact() instead of pci_enable_msi_range()
  • From: Tejun Heo
• Re: [PATCH 1/2] ahci: Ensure "MSI Revert to Single Message" mode is not enforced
  • From: Tejun Heo
• Re: [PATCH] libahci: ahci interrupt check for disabled port since private_data may be NULL
  • From: Tejun Heo
• Re: [PATCH] libahci: ahci interrupt check for disabled port since private_data may be NULL
  • From: Alexander Gordeev
• Re: [PATCH] ahci: do not request irq for dummy port
  • From: Tejun Heo
• Re: [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x
  • From: Jason Cooper
• [PATCH] ahci: do not request irq for dummy port
  • From: David Milburn
• Re: [PATCH] libahci: ahci interrupt check for disabled port since private_data may be NULL
  • From: David Milburn
• Re: [PATCH] libahci: ahci interrupt check for disabled port since private_data may be NULL
  • From: Tejun Heo
• Re: [PATCH 2/2] ahci: imx: software workaround for phy reset issue in resume
  • From: Tejun Heo
• Re: [PATCH 1/2] ahci: imx: use macros to define registers and bits
  • From: Tejun Heo
• Re: [PATCH] ahci: disable DEVSLP for Intel Valleyview
  • From: Jacob Pan
• [PATCH v2] ahci: disable DEVSLP for Intel Valleyview
  • From: Jacob Pan
• [PATCH RFC 5/5] ahci_imx: add disable for spread-spectrum
  • From: Russell King
• [PATCH RFC 2/5] ata: ahci_imx: avoid reprobing ahci_imx driver when using DT
  • From: Russell King
• [PATCH RFC 1/5] ata: ahci_imx: warn when disabling ahci link
  • From: Russell King
• [PATCH RFC 3/5] ata: ahci_imx: allow hardware parameters to be specified in DT
  • From: Russell King
• [PATCH 0/5] imx ahci DT updates + cubox-i eSATA support
  • From: Russell King - ARM Linux
• Re: [PATCH 1/2] ahci: imx: use macros to define registers and bits
  • From: Shawn Guo
• Re: [PATCH 1/2] ahci: imx: use macros to define registers and bits
  • From: Uwe Kleine-König
• Re: [PATCH 2/2] ahci: imx: software workaround for phy reset issue in resume
  • From: Shawn Guo
• Re: [PATCH] libahci: ahci interrupt check for disabled port since private_data may be NULL
  • From: Alexander Gordeev
• Re: [PATCH 1/2] ahci: imx: use macros to define registers and bits
  • From: Shawn Guo
• Re: [PATCH] ata: fix kconfig selection warning
  • From: Tejun Heo
• Re: [PATCH] libahci: ahci interrupt check for disabled port since private_data may be NULL
  • From: Tejun Heo
• Re: [PATCH] libahci: ahci interrupt check for disabled port since private_data may be NULL
  • From: David Milburn
• [PATCH] ata: fix kconfig selection warning
  • From: Peter Foley
• Re: [PATCH] libahci: ahci interrupt check for disabled port since private_data may be NULL
  • From: Tejun Heo
• Re: [PATCH 2/2] ahci: imx: software workaround for phy reset issue in resume
  • From: Tejun Heo
• Re: [PATCH 1/2] ahci: imx: use macros to define registers and bits
  • From: Tejun Heo
• [PATCHv3 5/5] ARM: configs: add ahci_mvebu to multi_v7_defconfig
  • From: Thomas Petazzoni
• [PATCHv3 4/5] ARM: configs: add ahci_mvebu to mvebu_v7_defconfig
  • From: Thomas Petazzoni
• [PATCHv3 3/5] ARM: mvebu: add Device Tree description of AHCI interfaces on Armada 38x
  • From: Thomas Petazzoni
• [PATCHv3 2/5] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
  • From: Thomas Petazzoni
• [PATCHv3 1/5] Documentation: dt-bindings: reformat and order list of ahci-platform compatibles
  • From: Thomas Petazzoni
• [PATCHv3 0/5] Support for Marvell AHCI interface on Armada 38x
  • From: Thomas Petazzoni
• Re: [PATCH] pata_samsung_cf: fix ata_host_activate() failure handling
  • From: Tejun Heo
• Re: [PATCH] pata_samsung_cf: fix ata_host_activate() failure handling
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] ahci: imx: software workaround for phy reset issue in resume
  • From: Fabio Estevam
• [PATCH 2/2] ahci: imx: software workaround for phy reset issue in resume
  • From: Shawn Guo
• [PATCH 1/2] ahci: imx: use macros to define registers and bits
  • From: Shawn Guo
• [PATCH] libahci: ahci interrupt check for disabled port since private_data may be NULL
  • From: David Milburn
• Re: [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x
  • From: Thomas Petazzoni
• Re: [PATCH v2] pata_arasan_cf: fix ata_host_activate() failure handling
  • From: Tejun Heo
• Re: [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x
  • From: Tejun Heo
• Re: [PATCH] pata_octeon_cf: use devm_kzalloc() to allocate cf_port
  • From: Tejun Heo
• [PATCH] pata_octeon_cf: use devm_kzalloc() to allocate cf_port
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x
  • From: Thomas Petazzoni
• Re: [PATCH v2] pata_arasan_cf: fix ata_host_activate() failure handling
  • From: Viresh Kumar
• Re: [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v2] pata_arasan_cf: fix ata_host_activate() failure handling
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x
  • From: Thomas Petazzoni
• Re: [PATCH] pata_arasan_cf: fix ata_host_activate() failure handling
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x
  • From: Andrew Lunn
• Re: [PATCH v2 1/5] Documentation: dt-bindings: reformat and order list of ahci-platform compatibles
  • From: Andrew Lunn
• [PATCH v2 5/5] ARM: configs: add ahci_mvebu to multi_v7_defconfig
  • From: Thomas Petazzoni
• [PATCH v2 4/5] ARM: configs: add ahci_mvebu to mvebu_v7_defconfig
  • From: Thomas Petazzoni
• [PATCH v2 3/5] ARM: mvebu: add Device Tree description of AHCI interfaces on Armada 38x
  • From: Thomas Petazzoni
• [PATCH v2 2/5] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
  • From: Thomas Petazzoni
• [PATCH v2 1/5] Documentation: dt-bindings: reformat and order list of ahci-platform compatibles
  • From: Thomas Petazzoni
• [PATCH v2 0/5] Support for Marvell AHCI interface on Armada 38x
  • From: Thomas Petazzoni
• Re: [GIT PULL] async scsi resume for 3.15
  • From: Linus Torvalds
• Re: [GIT PULL] async scsi resume for 3.15
  • From: Linus Torvalds
• Re: [GIT PULL] async scsi resume for 3.15
  • From: Dan Williams
• Re: [GIT PULL] async scsi resume for 3.15
  • From: James Bottomley
• Re: [PATCH] ahci: disable DEVSLP for Intel Valleyview
  • From: Tejun Heo
• Re: [PATCH] ahci: disable DEVSLP for Intel Valleyview
  • From: Bartlomiej Zolnierkiewicz
• [GIT PULL] async scsi resume for 3.15
  • From: Dan Williams
• [PATCH] ahci: disable DEVSLP for Intel Valleyview
  • From: Jacob Pan
• [PATCH V2 1/2] ata: ahci: append new hflag AHCI_HFLAG_NO_FBS
  • From: Kefeng Wang
• [PATCH V2 2/2] ahci: add support for Hisilicon sata
  • From: Kefeng Wang
• [PATCH V2 0/2] ahci: support for hisilicon sata
  • From: Kefeng Wang
• Re: [PATCH 2/2] ahci: add support for Hisilicon sata
  • From: Hans de Goede
• [PATCH 1/2] ata: ahci: append new hflag AHCI_HFLAG_NO_FBS
  • From: Kefeng Wang
• [PATCH 2/2] ahci: add support for Hisilicon sata
  • From: Kefeng Wang
• [PATCH] ide: use module_platform_driver()
  • From: Christoph Jaeger
• Re: [PATCH] ata: fix i.MX AHCI driver dependencies
  • From: Tejun Heo
• [PATCH] ata: fix i.MX AHCI driver dependencies
  • From: Jean Delvare
• Re: [PATCH 1/4] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
  • From: Thomas Petazzoni
• Re: [PATCH 1/2] libata: Expose trim capability in sysfs
  • From: Martin K. Petersen
• Re: [PATCH 1/4] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/4] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
  • From: Thomas Petazzoni
• Re: [PATCH 1/4] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
  • From: Andrew Lunn
• [PATCH 4/4] ARM: configs: add ahci_mvebu to multi_v7_defconfig
  • From: Thomas Petazzoni
• [PATCH 3/4] ARM: configs: add ahci_mvebu to mvebu_v7_defconfig
  • From: Thomas Petazzoni
• [PATCH 2/4] ARM: mvebu: add Device Tree description of AHCI interfaces on Armada 38x
  • From: Thomas Petazzoni
• [PATCH 1/4] ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
  • From: Thomas Petazzoni
• [PATCH 0/4] Support for Marvell AHCI interface on Armada 38x
  • From: Thomas Petazzoni
• Re: [PATCH 1/2] libata: Expose trim capability in sysfs
  • From: Marc MERLIN
• Re: [PATCH 1/2] libata: Expose trim capability in sysfs
  • From: Marc MERLIN
• Re: [PATCH 1/2] libata: Expose trim capability in sysfs
  • From: Chris Samuel
• Re: Bad DMA from Marvell 9230
  • From: Robert Hancock
• Re: [PATCH 1/2] libata: Expose trim capability in sysfs
  • From: Chris Samuel
• Re: [PATCH 1/2] libata: Expose trim capability in sysfs
  • From: Marc MERLIN
• RE: SATA link issue with Marvell 9170
  • From: Biji John
• Re: SATA link issue with Marvell 9170
  • From: Robert Hancock
• Re: [PATCH 1/2] libata: Expose trim capability in sysfs
  • From: Martin K. Petersen
• [PATCH] pata_at91: fix ata_host_activate() failure handling
  • From: Tejun Heo
• Re: SATA link issue with Marvell 9170
  • From: tj@xxxxxxxxxx
• Re: [PATCH 2/2] libata: Update queued trim blacklist for M5x0 drives
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: Expose trim capability in sysfs
  • From: Tejun Heo
• [PATCH 1/2] ahci: Ensure "MSI Revert to Single Message" mode is not enforced
  • From: Alexander Gordeev
• [PATCH 2/2] ahci: Use pci_enable_msi_exact() instead of pci_enable_msi_range()
  • From: Alexander Gordeev
• [PATCH 0/2] ahci: Tweaks to the driver's PCI function
  • From: Alexander Gordeev
• [PATCH 2/2] libata: Update queued trim blacklist for M5x0 drives
  • From: Martin K. Petersen
• [PATCH 1/2] libata: Expose trim capability in sysfs
  • From: Martin K. Petersen
• SATA link issue with Marvell 9170
  • From: Biji John
• Re: [PATCH] pata_arasan_cf: fix ata_host_activate() failure handling
  • From: Viresh Kumar
• Re: [PATCH] pata_samsung_cf: fix ata_host_activate() failure handling
  • From: Jingoo Han
• Re: [PATCH] pata_octeon_cf: fix ata_host_activate() failure handling
  • From: Guenter Roeck
• [GIT PULL] libata changes for v3.15-rc1
  • From: Tejun Heo
• [PATCH] libata/ahci: accommodate tag ordered controllers
  • From: Dan Williams
• Re: [PATCH] pata_octeon_cf: fix ata_host_activate() failure handling
  • From: David Daney
• Re: [PATCH] pata_at91: fix ata_host_activate() failure handling
  • From: Sergei Shtylyov
• [PATCH] pata_octeon_cf: fix ata_host_activate() failure handling
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] pata_samsung_cf: fix ata_host_activate() failure handling
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] pata_at91: fix ata_host_activate() failure handling
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] pata_arasan_cf: fix ata_host_activate() failure handling
  • From: Bartlomiej Zolnierkiewicz
• Re: Warning at ahci_enable_ahci() during resume
  • From: Marek Vasut
• [PATCH 3.2 069/200] ata: enable quirk from jmicron JMB350 for JMB394
  • From: Ben Hutchings
• Re: [PATCH] Subject: ata: libata Fixed Coding style & tabs
  • From: Tejun Heo
• [PATCH] Subject: ata: libata Fixed Coding style & tabs
  • From: paulmcquad
• Warning at ahci_enable_ahci() during resume
  • From: Fabio Estevam
• Re: Bad DMA from Marvell 9230
  • From: Tejun Heo
• Re: [PATCH v4] ata: fix Marvell SATA driver dependencies
  • From: Tejun Heo
• [PATCH v4] ata: fix Marvell SATA driver dependencies
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v3] ata: fix Marvell SATA driver dependencies
  • From: Sebastian Hesselbarth
• Re: [PATCH v3] ata: fix Marvell SATA driver dependencies
  • From: Andrew Lunn
• [PATCH v3] ata: fix Marvell SATA driver dependencies
  • From: Bartlomiej Zolnierkiewicz
• Bad DMA from Marvell 9230
  • From: Benjamin Herrenschmidt
• Re: patch fix for intel sdd s3500 series on Sil3512 controller
  • From: David F.
• Re: [PATCH v2] ata: fix Marvell SATA driver dependencies
  • From: Andrew Lunn
• Re: [PATCH] ata: fix Marvell SATA driver dependencies
  • From: One Thousand Gnomes
• Re: [PATCH] ata: fix Marvell SATA driver dependencies
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: fix Marvell SATA driver dependencies
  • From: One Thousand Gnomes
• [PATCH v2] ata: fix Marvell SATA driver dependencies
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: fix Marvell SATA driver dependencies
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ata: remove superfluous casts
  • From: Joe Perches
• Re: [PATCH] ata: remove superfluous casts
  • From: Tejun Heo
• Re: [PATCH] ata: fix Marvell SATA driver dependencies
  • From: Tejun Heo
• Re: [PATCH] ata: fix Marvell SATA driver dependencies
  • From: Andrew Lunn
• [PATCH] ata: fix Marvell SATA driver dependencies
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: sata_highbank: remove superfluous cast
  • From: Tejun Heo
• [PATCH] ata: sata_highbank: remove superfluous cast
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: fix Calxeda Highbank SATA driver dependencies
  • From: Tejun Heo
• [PATCH] ata: fix Calxeda Highbank SATA driver dependencies
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: fix ARASAN CompactFlash PATA driver dependencies
  • From: Tejun Heo
• [PATCH] ata: fix ARASAN CompactFlash PATA driver dependencies
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: fix R-Car SATA driver dependencies
  • From: Tejun Heo
• [PATCH] ata: fix R-Car SATA driver dependencies
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: limit sata_rcar host driver to ARCH_SHMOBILE
  • From: Simon Horman
• Re: [PATCH v4 0/4] ata: ahci_platform related cleanups
  • From: Tejun Heo
• Re: [PATCH] ata: limit sata_rcar host driver to ARCH_SHMOBILE
  • From: Tejun Heo
• [PATCH] ata: limit sata_rcar host driver to ARCH_SHMOBILE
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v4 1/4] ata: ahci_platform: fix ahci_platform_data->suspend method handling
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v4 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v4 2/4] ata: move library code from ahci_platform.c to libahci_platform.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v4 4/4] ARM: davinci: da850: update SATA AHCI support
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v4 0/4] ata: ahci_platform related cleanups
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3.8 03/81] ata: enable quirk from jmicron JMB350 for JMB394
  • From: Kamal Mostafa
• [PATCH v3 0/4] ata: ahci_platform related cleanups
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v3 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v3 4/4] ARM: davinci: da850: update SATA AHCI support
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v3 2/4] ata: move library code from ahci_platform.c to libahci_platform.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v3 1/4] ata: ahci_platform: fix ahci_platform_data->suspend method handling
  • From: Bartlomiej Zolnierkiewicz
• Re: patch fix for intel sdd s3500 series on Sil3512 controller
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v2 3/3] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller
  • From: Sekhar Nori
• Re: [PATCH v2 0/3] ata: ahci_platform related cleanups
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v5 3/3] scsi: async sd resume
  • From: Dan Williams
• [PATCH v2 0/3] ata: ahci_platform related cleanups
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v2 1/3] ata: ahci_platform: fix ahci_platform_data->suspend method handling
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v2 2/3] ata: move library code from ahci_platform.c to libahci_platform.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v2 3/3] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller
  • From: Bartlomiej Zolnierkiewicz
• [3.8.y.z extended stable] Patch "ata: enable quirk from jmicron JMB350 for JMB394" has been added to staging queue
  • From: Kamal Mostafa
• Re: [PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller
  • From: Sekhar Nori
• Re: [PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v6 04/18] ahci-platform: Add support for devices with more then 1 clock
  • From: Ben Dooks
• Re: [PATCH 4/4] ata: add new-style AHCI platform driver for ST SPEAr1340 AHCI controller
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH RESEND] ARM: SPEAr1340: static-ize SATA functions
  • From: Pratyush Anand
• Re: [PATCH 4/4] ata: add new-style AHCI platform driver for ST SPEAr1340 AHCI controller
  • From: Pratyush Anand
• Re: [PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller
  • From: Sekhar Nori
• Re: [PATCH -next] libata.h: add stub for ata_sas_port_resume
  • From: Tejun Heo
• Re: [PATCH -next] libata.h: add stub for ata_sas_port_resume
  • From: Dan Williams
• Re: [PATCH -next] libata.h: add stub for ata_sas_port_resume
  • From: Tejun Heo
• [PATCH -next] libata.h: add stub for ata_sas_port_resume
  • From: Randy Dunlap
• Re: [PATCH v6 1/3] libata, libsas: kill pm_result and related cleanup
  • From: Tejun Heo
• Re: [PATCH] ata: Fix compiler warning with APM X-Gene host controller driver
  • From: Tejun Heo
• [PATCH] ata: Fix compiler warning with APM X-Gene host controller driver
  • From: Loc Ho
• Re: [PATCH v6 1/3] libata, libsas: kill pm_result and related cleanup
  • From: Dan Williams
• Re: [PATCH v6 1/3] libata, libsas: kill pm_result and related cleanup
  • From: Tejun Heo
• Re: [PATCH RESEND] ARM: SPEAr1340: static-ize SATA functions
  • From: Viresh Kumar
• [PATCH RESEND] ARM: SPEAr1340: static-ize SATA functions
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: Fix SC1200 dependencies
  • From: David Miller
• Re: [PATCH] ide: Fix CS5520 and CS5530 dependencies
  • From: David Miller
• Re: [PATCH v18 0/4] ata: Add APM X-Gene SoC AHCI SATA host controller support
  • From: Tejun Heo
• Re: [PATCH 0/4] ata: add remaining new-style AHCI platform drivers
  • From: Hans de Goede
• Re: [PATCH 0/4] ata: add remaining new-style AHCI platform drivers
  • From: Tejun Heo
• [PATCH 1/4] ata: ahci_platform: fix ahci_platform_data->suspend method handling
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/4] ata: move library code from ahci_platform.c to libahci_platform.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/4] ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/4] ata: add new-style AHCI platform driver for ST SPEAr1340 AHCI controller
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 0/4] ata: add remaining new-style AHCI platform drivers
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v5 3/3] scsi: async sd resume
  • From: Dan Williams
• Re: [PATCH] ata: ahci_sunxi: fix code formatting
  • From: Tejun Heo
• Re: [PATCH] ata: ahci_sunxi: make ahci_sunxi_resume() static
  • From: Tejun Heo
• Re: [PATCH] ata: ahci_sunxi: fix code formatting
  • From: Hans de Goede
• Re: [PATCH] ata: ahci_sunxi: make ahci_sunxi_resume() static
  • From: Hans de Goede
• Re: [PATCH] ata: ahci_sunxi: disable resources on driver removal
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ata: ahci_sunxi: fix code formatting
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ata: ahci_sunxi: make ahci_sunxi_resume() static
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ata: ahci_sunxi: disable resources on driver removal
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v5 3/3] scsi: async sd resume
  • From: James Bottomley
• Re: linux-next: ahci_platform broken build
  • From: Tejun Heo
• linux-next: ahci_platform broken build
  • From: Tim Gardner
• Re: linux-next: ahci_platform broken build
  • From: Hans de Goede
• Re: [PATCH v18 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver
  • From: Loc Ho
• Re: [PATCH v5 3/3] scsi: async sd resume
  • From: Dan Williams
• Re: [PATCH v5 3/3] scsi: async sd resume
  • From: James Bottomley
• Re: [PATCH v18 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver
  • From: Arnd Bergmann
• Re: [PATCH v18 4/4] arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries
  • From: Arnd Bergmann
• Re: [PATCH v18 2/4] Documentation: Add documentation for the APM X-Gene SoC SATA host controller DTS binding
  • From: Arnd Bergmann
• Re: [PATCH v18 1/4] arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries
  • From: Arnd Bergmann
• Re: [PATCH v17 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver
  • From: Arnd Bergmann
• [PATCH v18 4/4] arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries
  • From: Loc Ho
• [PATCH v18 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver
  • From: Loc Ho
• [PATCH v18 2/4] Documentation: Add documentation for the APM X-Gene SoC SATA host controller DTS binding
  • From: Loc Ho
• [PATCH v18 1/4] arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries
  • From: Loc Ho
• [PATCH v18 0/4] ata: Add APM X-Gene SoC AHCI SATA host controller support
  • From: Loc Ho
• Re: [PATCH v17 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver
  • From: Loc Ho
• Re: [PATCH v17 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver
  • From: Arnd Bergmann
• [PATCH v6 3/3] scsi: async sd resume
  • From: Dan Williams
• [PATCH v6 2/3] libata: async resume
  • From: Dan Williams
• [PATCH v6 1/3] libata, libsas: kill pm_result and related cleanup
  • From: Dan Williams
• [PATCH v6 0/3] Accelerate Storage Resume (2x or more)
  • From: Dan Williams
• Re: [PATCH v17 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver
  • From: Loc Ho
• Re: [PATCH v5 3/3] scsi: async sd resume
  • From: Dan Williams
• Re: [PATCH v17 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver
  • From: Arnd Bergmann
• Re: [PATCH v17 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver
  • From: Loc Ho
• Re: [PATCH] ata: pata_imx: fix devm_ioremap_resource() return value checking
  • From: Tejun Heo
• Re: [PATCH] ata: ahci_platform: fix devm_ioremap_resource() return value checking
  • From: Tejun Heo
• Re: [PATCH 2/2] ata: ahci_st: remove deprecated struct ahci_platform_data usage
  • From: Tejun Heo
• [PATCH 2/2] ata: ahci_st: remove deprecated struct ahci_platform_data usage
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/2] ata: ahci_st: build fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ata: pata_imx: fix devm_ioremap_resource() return value checking
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ata: ahci_platform: fix devm_ioremap_resource() return value checking
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: Fix SC1200 dependencies
  • From: Jean Delvare
• Re: [PATCH 0/3] ata: acpi/zpodd: some small fixes
  • From: Tejun Heo
• Re: [PATCH 2/3] libata: acpi: avoid passing NULL to ACPI evaluation method
  • From: Aaron Lu
• Re: [PATCH] ata: Fix SC1200 dependencies
  • From: Tejun Heo
• [PATCH] ata: Fix SC1200 dependencies
  • From: Jean Delvare
• Re: [PATCH 2/3] libata: acpi: avoid passing NULL to ACPI evaluation method
  • From: Tejun Heo
• Re: [PATCH 2/3] libata: acpi: avoid passing NULL to ACPI evaluation method
  • From: Aaron Lu
• Re: [PATCH 2/3] libata: acpi: avoid passing NULL to ACPI evaluation method
  • From: Aaron Lu
• Re: [PATCH 0/5] ahci: st: Apply Bartlomiej's suggestions
  • From: Tejun Heo
• Re: [PATCH 2/3] libata: acpi: avoid passing NULL to ACPI evaluation method
  • From: Tejun Heo
• Re: [PATCH v17 4/4] arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries
  • From: Arnd Bergmann
• Re: [PATCH v17 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver
  • From: Arnd Bergmann
• Re: [PATCH v17 2/4] Documentation: Add documentation for the APM X-Gene SoC SATA host controller DTS binding
  • From: Arnd Bergmann
• Re: [PATCH v17 1/4] arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries
  • From: Arnd Bergmann
• Update on LSF/MM [was Re: LSF/MM 2014 Call For Proposals]
  • From: James Bottomley
• [PATCH 3/3] libata: zpodd: eliminate odd_can_poweroff
  • From: Aaron Lu
• [PATCH 2/3] libata: acpi: avoid passing NULL to ACPI evaluation method
  • From: Aaron Lu
• [PATCH 1/3] libata: zpodd: should depend on PM_RUNTIME
  • From: Aaron Lu
• [PATCH 0/3] ata: acpi/zpodd: some small fixes
  • From: Aaron Lu
• Re: [PATCH v17 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v17 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver
  • From: Loc Ho
• [PATCH v17 4/4] arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries
  • From: Loc Ho
• [PATCH v17 2/4] Documentation: Add documentation for the APM X-Gene SoC SATA host controller DTS binding
  • From: Loc Ho
• [PATCH v17 1/4] arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries
  • From: Loc Ho
• [PATCH v17 0/4] ata: Add APM X-Gene SoC AHCI SATA host controller support
  • From: Loc Ho
• Re: [PATCH v16 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver
  • From: Loc Ho
• Re: [PATCH v16 3/4] ata: Add APM X-Gene SoC AHCI SATA host controller driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v15 3/3] arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries
  • From: Loc Ho
• Re: [PATCH] libata: end the r-word
  • From: Dan Williams
• Re: [PATCH] libata: end the r-word
  • From: One Thousand Gnomes
• Re: Bug (?) in ata (ahci) driver can lead to panic with ZPODD and unbind
  • From: One Thousand Gnomes
• [PATCH 2/5] ahci: st: Remove legacy dependencies on PHY
  • From: Lee Jones
• [PATCH 4/5] ahci: st: Only build for ST-Micro h/w
  • From: Lee Jones
• [PATCH 5/5] ahci: st: Invoke AHCI Platform Suspend/Resume
  • From: Lee Jones
• [PATCH 3/5] ahci: st: Utilise ata_platform_remove_one() call
  • From: Lee Jones
• [PATCH 1/5] ahci: st: Standardise naming conventions
  • From: Lee Jones
• [PATCH 0/5] ahci: st: Apply Bartlomiej's suggestions
  • From: Lee Jones
• Re: [PATCH] libata: end the r-word
  • From: Dan Williams