Re: [PATCH] phy: qcom: Add driver for QCOM APQ8064 SATA PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Jun 23, 2014, at 1:00 PM, Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> wrote:

> Add a PHY driver for uses with AHCI based SATA controller driver on the
> APQ8064 family of SoCs.
> 
> This patch is a forward port plus separating PHY code of SATA driver
> from Qualcomm's v3.4 andriod kernel.
> 
> Tested on IFC6410 board.
> 
> CC: Sujit Reddy Thumma <sthumma@xxxxxxxxxxxxxx>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
> drivers/phy/Kconfig                 |   7 +
> drivers/phy/Makefile                |   1 +
> drivers/phy/phy-qcom-apq8064-sata.c | 358 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 366 insertions(+)
> create mode 100644 drivers/phy/phy-qcom-apq8064-sata.c

Did you look at the 3.10 Android kernel tree version of the phy driver?

Also do you have a DT binding spec to go with this?

- k--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux