On 06/16/2014 12:26 PM, Antoine Ténart wrote: > The Berlin SoC has a two SATA ports. Add a PHY driver to handle them. > > The mode selection can let us think this PHY can be configured to fit > other purposes. But there are reasons to think the SATA mode will be > the only one usable: the PHY registers are only accessible indirectly > through two registers in the SATA range, the PHY seems to be integrated > and no information tells us the contrary. For these reasons, make the > driver a SATA PHY driver. > > Signed-off-by: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx> > --- [...] > diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/phy-berlin-sata.c > new file mode 100644 > index 000000000000..907897a02672 > --- /dev/null > +++ b/drivers/phy/phy-berlin-sata.c > @@ -0,0 +1,232 @@ > +/* > + * Marvell Berlin SATA PHY driver > + * > + * Copyright (C) 2014 Marvell Technology Group Ltd. > + * > + * Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx> > + * > + * This file is licensed under the terms of the GNU General Public > + * License version 2. This program is licensed "as is" without any > + * warranty of any kind, whether express or implied. > + */ > + > +#include <linux/module.h> > +#include <linux/phy/phy.h> > +#include <linux/io.h> > +#include <linux/platform_device.h> > + > +#define HOST_VSA_ADDR 0x0 > +#define HOST_VSA_DATA 0x4 > +#define PORT_VSR_ADDR 0x78 > +#define PORT_VSR_DATA 0x7c > +#define PORT_SCR_CTL 0x2c > + > +#define CONTROL_REGISTER 0x0 > +#define MBUS_SIZE_CONTROL 0x4 > + > +#define POWER_DOWN_PHY0 BIT(6) > +#define POWER_DOWN_PHY1 BIT(14) > +#define MBUS_WRITE_REQUEST_SIZE_128 (BIT(2) << 16) > +#define MBUS_READ_REQUEST_SIZE_128 (BIT(2) << 19) > + > +#define PHY_BASE 0x200 Antoine, I gave your Berlin AHCI patches a try on BG2. I finally got it working but BG2 has a different PHY_BASE and need some register fixups. Please update this patch and the DT bindings to reflect the difference of BG2Q with respect to BG2 as below. [...] > + > +static const struct of_device_id phy_berlin_sata_of_match[] = { > + { .compatible = "marvell,berlin-sata-phy" }, s/marvell,berlin-sata-phy/marvell,berlin2-sata-phy/ and add marvell,berlin2q-sata-phy That way it can be applied now without proper support for BG2 and I can send patches later. Sebastian > + { }, > +}; > + > +static struct platform_driver phy_berlin_sata_driver = { > + .probe = phy_berlin_sata_probe, > + .driver = { > + .name = "phy-berlin-sata", > + .owner = THIS_MODULE, > + .of_match_table = phy_berlin_sata_of_match, > + }, > +}; > +module_platform_driver(phy_berlin_sata_driver); > + > +MODULE_DESCRIPTION("Marvell Berlin SATA PHY driver"); > +MODULE_AUTHOR("Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>"); > +MODULE_LICENSE("GPL v2"); > -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html