The libahci now allows to use multiple PHYs and to represent each port
as a sub-node. Add these bindings to the documentation.
Signed-off-by: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/ata/ahci-platform.txt | 38 +++++++++++++++++++++-
1 file changed, 37 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 48b285ffa3a6..14089f94100d 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -3,11 +3,16 @@
SATA nodes are defined to describe on-chip Serial ATA controllers.
Each SATA controller should have its own node.
+It is possible, but not required, to represent each port as a sub-node.
+It allows to enable each port independently when dealing with multiple
+PHYs.
+
Required properties:
- compatible : compatible list, one of "snps,spear-ahci",
"snps,exynos5440-ahci", "ibm,476gtr-ahci",
"allwinner,sun4i-a10-ahci", "fsl,imx53-ahci"
- "fsl,imx6q-ahci" or "snps,dwc-ahci"
+ "fsl,imx6q-ahci", "snps,dwc-ahci" or
+ "generic-ahci"
- interrupts : <interrupt mapping for SATA IRQ>
- reg : <registers mapping>
@@ -15,11 +20,23 @@ Optional properties:
- dma-coherent : Present if dma operations are coherent
- clocks : a list of phandle + clock specifier pairs
- target-supply : regulator for SATA target power
+- phys : reference to the SATA PHY node
+- phy-names : must be "sata-phy"
"fsl,imx53-ahci", "fsl,imx6q-ahci" required properties:
- clocks : must contain the sata, sata_ref and ahb clocks
- clock-names : must contain "ahb" for the ahb clock
+Required properties when using sub-nodes:
+- #address-cells : number of cells to encode an address
+- #size-cells : number of cells representing the size of an address
+
+
+Sub-nodes required properties:
+- reg : the port number
+- phys : reference to the SATA PHY node
+
+
Examples:
sata@ffe08000 {
compatible = "snps,spear-ahci";
@@ -34,3 +51,22 @@ Examples:
clocks = <&pll6 0>, <&ahb_gates 25>;
target-supply = <®_ahci_5v>;
};
+
+With sub-nodes:
+ sata@f7e90000 {
+ compatible = "generic-ahci";
+ reg = <0xe90000 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy 0>;
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy 1>;
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
