Linux IDE Archive

• Thread Index

• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Phillip Susi
• [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Martin K. Petersen
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Pavel Machek
• Re: SATA disks disabled on boot
  • From: Nuno Magalhães
• Re: SATA disks disabled on boot
  • From: Tejun Heo
• Re: copy speed slows down after kernel update
  • From: Tejun Heo
• Re: Fix me in libata-scsi.c
  • From: Tejun Heo
• Re: [PATCH] sata_fsl: fix error handling of irq_of_parse_and_map
  • From: Tejun Heo
• Re: [PATCH 2/3] AHCI: Add DeviceIDs for Sunrise Point-LP SATA controller
  • From: Tejun Heo
• Re: [PATCH] ata: add MAINTAINERS entry for libata PATA drivers
  • From: Alan Cox
• Re: [PATCH] ata: add MAINTAINERS entry for libata PATA drivers
  • From: Sergei Shtylyov
• [PATCH] ata: add MAINTAINERS entry for libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• Re: [nForce4] - Repeatable issues with nForce 4
  • From: Tejun Heo
• Re: [nForce4] - Repeatable issues with nForce 4
  • From: Robert Hancock
• Re: [nForce4] - Repeatable issues with nForce 4
  • From: Jacobo Pantoja
• Re: [nForce4] - Repeatable issues with nForce 4
  • From: Robert Hancock
• Re: [nForce4] - Repeatable issues with nForce 4
  • From: Jacobo Pantoja
• Re: [nForce4] - Repeatable issues with nForce 4
  • From: Robert Hancock
• Re: [nForce4] - Repeatable issues with nForce 4
  • From: Jacobo Pantoja
• copy speed slows down
  • From: Yakushkin Mike
• [PATCH] drivers: ide: Fix mostly harmless off-by-one hardcoded value
  • From: Rasmus Villemoes
• Re: [RFC PATCH] sg3_utils: Added hybrid information log utility
  • From: Douglas Gilbert
• RE: [RFC PATCH] sg3_utils: Added hybrid information log utility
  • From: Akers, Jason B
• Re: [RFC PATCH] sg3_utils: Added hybrid information log utility
  • From: Phillip Susi
• Re: BUG in scsi_lib.c due to a bad commit
  • From: Barto
• LSF/MM 2015 Call For Proposals
  • From: Mel Gorman
• Re: BUG in scsi_lib.c due to a bad commit
  • From: Christoph Hellwig
• [PATCH 1/1] IDE: Deletion of an unnecessary check before the function call "module_put"
  • From: SF Markus Elfring
• [PATCH] block: create ioctl to discard-or-zeroout a range of blocks
  • From: Darrick J. Wong
• Re: [PATCH 3/3] block: Introduce blkdev_issue_zeroout_discard() function
  • From: Darrick J. Wong
• Re: read performance is too low compared to write - /dev/sda1
  • From: Jagan Teki
• [PATCH] sata_fsl: fix error handling of irq_of_parse_and_map
  • From: Dmitry Torokhov
• [GIT PULL] libata fixes for v3.18-rc4
  • From: Tejun Heo
• Re: [PATCH 3/3] block: Introduce blkdev_issue_zeroout_discard() function
  • From: Martin K. Petersen
• Re: [PATCH v2 2/2] sata_rcar: Document deprecated "renesas,rcar-sata"
  • From: Tejun Heo
• Re: [PATCH] ahci_sunxi: Make AHCI_HFLAG_NO_PMP flag configurable with a module option
  • From: Tejun Heo
• RE: [PATCH 06/10] libata: use __scsi_format_command()
  • From: Elliott, Robert (Server Storage)
• [PATCH] ahci_sunxi: Make AHCI_HFLAG_NO_PMP flag configurable with a module option
  • From: Hans de Goede
• Re: read performance is too low compared to write - /dev/sda1
  • From: Roger Heflin
• Re: read performance is too low compared to write - /dev/sda1
  • From: Jagan Teki
• Re: [PATCH] ahci_sunxi: Drop AHCI_HFLAG_NO_PMP flag
  • From: Hans de Goede
• Re: read performance is too low compared to write - /dev/sda1
  • From: Roger Heflin
• Re: [PATCH] ahci_sunxi: Drop AHCI_HFLAG_NO_PMP flag
  • From: Tejun Heo
• read performance is too low compared to write - /dev/sda1
  • From: Jagan Teki
• Re: [PATCH] ahci_sunxi: Drop AHCI_HFLAG_NO_PMP flag
  • From: Hans de Goede
• Re: [PATCH resend regression?] AHCI: Fix threaded interrupt setup
  • From: Tejun Heo
• Re: [PATCH] ahci_sunxi: Drop AHCI_HFLAG_NO_PMP flag
  • From: Tejun Heo
• [PATCH] ahci_sunxi: Drop AHCI_HFLAG_NO_PMP flag
  • From: Hans de Goede
• Re: [PATCH resend regression?] AHCI: Fix threaded interrupt setup
  • From: Marc Zyngier
• [PATCH] AHCI: Fix threaded interrupt setup
  • From: Hans de Goede
• [PATCH resend regression?] AHCI: Fix threaded interrupt setup
  • From: Hans de Goede
• Re: [RFC] Discard update for 3.19
  • From: Martin K. Petersen
• Re: [RFC] Discard update for 3.19
  • From: Ewan Milne
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Dan Williams
• Re: [PATCH 3/3] block: Introduce blkdev_issue_zeroout_discard() function
  • From: Martin K. Petersen
• Re: [PATCH 3/3] block: Introduce blkdev_issue_zeroout_discard() function
  • From: Darrick J. Wong
• Re: [PATCH 2/3] sd: Disable discard_zeroes_data for UNMAP
  • From: Paolo Bonzini
• Re: [PATCH] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Robert Richter
• [PATCH v2 1/2] sata_rcar: Add clocks to sata_rcar bindings
  • From: Geert Uytterhoeven
• [PATCH v2 2/2] sata_rcar: Document deprecated "renesas,rcar-sata"
  • From: Geert Uytterhoeven
• Re: [PATCH] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Jiang Liu
• Re: [RFC] Discard update for 3.19
  • From: Christoph Hellwig
• [PATCH] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Robert Richter
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Dave Chinner
• [PATCH 2/3] AHCI: Add DeviceIDs for Sunrise Point-LP SATA controller
  • From: Devin Ryles
• Re: [PATCH 3/3] block: Introduce blkdev_issue_zeroout_discard() function
  • From: Martin K. Petersen
• Re: [PATCH 3/3] block: Introduce blkdev_issue_zeroout_discard() function
  • From: Theodore Ts'o
• Re: [RFC] Discard update for 3.19
  • From: Martin K. Petersen
• Re: [PATCH 3/3] block: Introduce blkdev_issue_zeroout_discard() function
  • From: Martin K. Petersen
• Re: [PATCH 1/3] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Martin K. Petersen
• Re: [RFC] Discard update for 3.19
  • From: Bernd Schubert
• Re: [PATCH 3/3] block: Introduce blkdev_issue_zeroout_discard() function
  • From: Christoph Hellwig
• Re: [PATCH 2/3] sd: Disable discard_zeroes_data for UNMAP
  • From: Christoph Hellwig
• Re: [PATCH 1/3] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Christoph Hellwig
• [PATCH 3/3] block: Introduce blkdev_issue_zeroout_discard() function
  • From: Martin K. Petersen
• [PATCH 1/3] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Martin K. Petersen
• [PATCH 2/3] sd: Disable discard_zeroes_data for UNMAP
  • From: Martin K. Petersen
• [RFC] Discard update for 3.19
  • From: Martin K. Petersen
• [PATCH 06/10] libata: use __scsi_format_command()
  • From: Hannes Reinecke
• Re: [PATCH 04/10] libata: use __scsi_format_command()
  • From: Christoph Hellwig
• Re: [PATCHv2 0/3] Initial ZAC support
  • From: Tejun Heo
• Re: [PATCHv2 0/3] Initial ZAC support
  • From: Hannes Reinecke
• Re: [PATCHv2 0/3] Initial ZAC support
  • From: Christoph Hellwig
• [PATCH 2/3] libata: Implement ATA_DEV_ZAC
  • From: Hannes Reinecke
• [PATCH 1/3] libsas: use ata_dev_classify()
  • From: Hannes Reinecke
• [PATCH 3/3] libata-scsi: Update SATL for ZAC drives
  • From: Hannes Reinecke
• [PATCHv2 0/3] Initial ZAC support
  • From: Hannes Reinecke
• Re: BUG: AHCI: ata8 port resetting needlessly, slow boot
  • From: Tejun Heo
• Re: BUG: AHCI: ata8 port resetting needlessly, slow boot
  • From: Zlatko Calusic
• Re: [bz87101 PATCH] libata: allow sata_sil24 to opt-out of tag ordered submission
  • From: Tejun Heo
• Re: [PATCH 2/3] sata_rcar: Document deprecated "renesas,rcar-sata"
  • From: Tejun Heo
• [PATCH 04/10] libata: use __scsi_format_command()
  • From: Hannes Reinecke
• Re: FW: [PATCH V2] ata: Disabling the async PM for JMicron chips
  • From: Barto
• Re: BUG: AHCI: ata8 port resetting needlessly, slow boot
  • From: Antoine Tenart
• BUG: AHCI: ata8 port resetting needlessly, slow boot
  • From: Zlatko Calusic
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Dan Williams
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Dan Williams
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Jens Axboe
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Jens Axboe
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Jens Axboe
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Dave Chinner
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Dan Williams
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Martin K. Petersen
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Jens Axboe
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Martin K. Petersen
• Re: [PATCH 3/3] ARM: shmobile: r8a7779 dtsi: Add SoC-specific SATA compatible property
  • From: Simon Horman
• Re: [PATCH 0/3] ARM: shmobile: sata_rcar updates
  • From: Simon Horman
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Jens Axboe
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Dan Williams
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Dave Chinner
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Jens Axboe
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Dan Williams
• Re: [RFC PATCH 1/5] block, ioprio: include caching advice via ionice
  • From: Dan Williams
• Re: [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Dave Chinner
• [RFC PATCH] sg3_utils: Added hybrid information log utility
  • From: Jason B. Akers
• [RFC PATCH] sg3_utils Hybrid Information Log utility
  • From: Jason B. Akers
• Re: [RFC PATCH 1/5] block, ioprio: include caching advice via ionice
  • From: Jeff Moyer
• [RFC PATCH 3/5] block: untangle ioprio from BLK_CGROUP and BLK_DEV_THROTTLING
  • From: Jason B. Akers
• [RFC PATCH 1/5] block, ioprio: include caching advice via ionice
  • From: Jason B. Akers
• [RFC PATCH 2/5] block: ioprio hint to low-level device drivers
  • From: Jason B. Akers
• [RFC PATCH 4/5] block, mm: Added the necessary plumbing to take ioprio hints down to block layer
  • From: Jason B. Akers
• [RFC PATCH 5/5] libata: Enabling Solid State Hybrid Drives (SSHDs) based on SATA 3.2 standard
  • From: Jason B. Akers
• [RFC PATCH 0/5] Enable use of Solid State Hybrid Drives
  • From: Jason B. Akers
• [bz87101 PATCH] libata: allow sata_sil24 to opt-out of tag ordered submission
  • From: Dan Williams
• Re: [PATCH 0/3] ARM: shmobile: sata_rcar updates
  • From: Geert Uytterhoeven
• Re: [PATCH 0/3] ARM: shmobile: sata_rcar updates
  • From: Tejun Heo
• [PATCH 3/3] ARM: shmobile: r8a7779 dtsi: Add SoC-specific SATA compatible property
  • From: Geert Uytterhoeven
• [PATCH 0/3] ARM: shmobile: sata_rcar updates
  • From: Geert Uytterhoeven
• [PATCH 1/3] sata_rcar: Add clocks to sata_rcar bindings
  • From: Geert Uytterhoeven
• [PATCH 2/3] sata_rcar: Document deprecated "renesas,rcar-sata"
  • From: Geert Uytterhoeven
• [PATCH v3] ata: sata_rcar: Add r8a7793 device support
  • From: Yoshihiro Kaneko
• Re: [PATCH v3] ata: sata_rcar: Add r8a7793 device support
  • From: Tejun Heo
• Re: [PATCH v2] ata: sata_rcar: Add r8a7793 device support
  • From: Yoshihiro Kaneko
• Re: blkdiscard vs hdparm for erasing a SSD?
  • From: Mark Lord
• Re: [PATCH libata/for-3.18-fixes] Revert "AHCI: Optimize single IRQ interrupt processing"
  • From: Tejun Heo
• Re: [PATCH libata/for-3.18-fixes] Revert "AHCI: Optimize single IRQ interrupt processing"
  • From: Alexander Gordeev
• Re: [PATCH v2] ata: sata_rcar: Add r8a7793 device support
  • From: Tejun Heo
• Re: [PATCH 1/4] ahci: Add Device IDs for Intel Sunrise Point PCH
  • From: Tejun Heo
• [PATCH libata/for-3.18-fixes] ahci: disable MSI instead of NCQ on Samsung pci-e SSDs on macbooks
  • From: Tejun Heo
• [PATCH libata/for-3.18-fixes] Revert "AHCI: Optimize single IRQ interrupt processing"
  • From: Tejun Heo
• Re: [PATCH] doc: kernel-parameters.txt: Add ide-generic.probe-mask
  • From: Jonathan Corbet
• Re: [PATCH] AHCI: Fix threaded interrupt setup
  • From: Alexander Gordeev
• Re: [PATCH v3] ata: sata_rcar: Disable DIPM mode for r8a7790 ES1
  • From: Tejun Heo
• Re: [PATCH v2] ata: sata_rcar: Disable DIPM mode for r8a7790 ES1
  • From: Simon Horman
• [PATCH v3] ata: sata_rcar: Disable DIPM mode for r8a7790 ES1
  • From: Simon Horman
• [PATCH] doc: kernel-parameters.txt: Add ide-generic.probe-mask
  • From: Maciej W. Rozycki
• Re: [PATCH v2] ata: sata_rcar: Disable DIPM mode for r8a7790 ES1
  • From: Sergei Shtylyov
• Re: [PATCH v2] ata: sata_rcar: Disable DIPM mode for r8a7790 ES1
  • From: Magnus Damm
• Re: [PATCH] ata: sata_rcar: Add DIPM mode disabling workaround
  • From: Simon Horman
• [PATCH v2] ata: sata_rcar: Disable DIPM mode for r8a7790 ES1
  • From: Simon Horman
• [PATCH] AHCI: Fix threaded interrupt setup
  • From: Marc Zyngier
• Re: blkdiscard vs hdparm for erasing a SSD?
  • From: One Thousand Gnomes
• [Bug 86611] USB TO IDE Bridge stopped to work properly after kernel upgrade linux-3.12.21 -> linux-3.14.14
  • From: bugzilla-daemon
• [Bug 86611] New: USB TO IDE Bridge stopped to work properly after kernel upgrade linux-3.12.21 -> linux-3.14.14
  • From: bugzilla-daemon
• Re: [PATCH] ata: sata_rcar: Disable DIPM mode for r8a7790 ES1
  • From: Sergei Shtylyov
• Re: [PATCH] ata: sata_rcar: Disable DIPM mode for r8a7790 ES1
  • From: Simon Horman
• Re: [PATCH] ata: sata_rcar: Disable DIPM mode for r8a7790 ES1
  • From: Magnus Damm
• Re: blkdiscard vs hdparm for erasing a SSD?
  • From: Peter Wu
• Re: [PATCH v2] ata: sata_rcar: Add r8a7793 device support
  • From: Simon Horman
• Re: [PATCH v2] ata: sata_rcar: Add r8a7793 device support
  • From: Khiem Nguyen
• Re: [PATCH v2] ata: sata_rcar: Add r8a7793 device support
  • From: Simon Horman
• [PATCH] ata: sata_rcar: Disable DIPM mode for r8a7790 ES1
  • From: Simon Horman
• Re: [PATCH v2] ata: sata_rcar: Add r8a7793 device support
  • From: Khiem Nguyen
• Re: [PATCH v2] ata: sata_rcar: Add r8a7793 device support
  • From: Simon Horman
• [GIT] IDE
  • From: David Miller
• Re: [PATCH] Drivers: ide: Remove typedef atiixp_ide_timing
  • From: David Miller
• Re: [PATCH 00/12] dmaengine: remove users of device_control
  • From: Vinod Koul
• Re: blkdiscard vs hdparm for erasing a SSD?
  • From: Tim Small
• blkdiscard vs hdparm for erasing a SSD?
  • From: Peter Wu
• Re: [PATCH] ata: sata_rcar: Add r8a7793 device support
  • From: Yoshihiro Kaneko
• [PATCH v2] ata: sata_rcar: Add r8a7793 device support
  • From: Yoshihiro Kaneko
• Re: [PATCH] ata: sata_rcar: Add r8a7793 device support
  • From: Geert Uytterhoeven
• [PATCH] ata: sata_rcar: Add r8a7793 device support
  • From: Yoshihiro Kaneko
• [PATCH 1/4] ahci: Add Device IDs for Intel Sunrise Point PCH
  • From: James Ralston
• Re: [PATCH 01/12] pata_arasan_cf: use dmaengine_terminate_all() API
  • From: Viresh Kumar
• [PATCH 01/12] pata_arasan_cf: use dmaengine_terminate_all() API
  • From: Vinod Koul
• [PATCH 00/12] dmaengine: remove users of device_control
  • From: Vinod Koul
• Re: [PATCH] ata: sata_rcar: Add DIPM mode disabling workaround
  • From: Sergei Shtylyov
• [PATCH] ata: sata_rcar: Add DIPM mode disabling workaround
  • From: Yoshihiro Kaneko
• [GIT PULL] libata changes for v3.18-rc1
  • From: Tejun Heo
• Re: [PATCH] libata: Un-break ATA blacklist
  • From: George Spelvin
• Re: [PATCH] libata: Un-break ATA blacklist
  • From: George Spelvin
• [urgent regression PATCH v2] libata: Un-break ATA blacklist
  • From: George Spelvin
• Re: [PATCH] libata: Un-break ATA blacklist
  • From: Tejun Heo
• Re: [PATCH] libata: Un-break ATA blacklist
  • From: Steven Honeyman
• [PATCH] libata: Un-break ATA blacklist
  • From: George Spelvin
• Re: [PATCH v5 0/5] AHCI: Optimize interrupt processing in multi-MSI mode
  • From: Tejun Heo
• [PATCH 7/5] AHCI: Do not acquire ata_host::lock from single IRQ handler
  • From: Alexander Gordeev
• [PATCH 6/5] AHCI: Optimize single IRQ interrupt processing
  • From: Alexander Gordeev
• Re: [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Tejun Heo
• Re: [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Alexander Gordeev
• Re: [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Tejun Heo
• Re: [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Alexander Gordeev
• [no subject]
  • From: Suman Tripathi
• Re: [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Tejun Heo
• Re: [PATCH] ata: pata_imx: Use the SIMPLE_DEV_PM_OPS() macro
  • From: Fabio Estevam
• Re: [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Tejun Heo
• Re: [PATCH] ata: pata_imx: Use the SIMPLE_DEV_PM_OPS() macro
  • From: Tejun Heo
• [PATCH] ata: pata_imx: Use the SIMPLE_DEV_PM_OPS() macro
  • From: Fabio Estevam
• Re: [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Alexander Gordeev
• Re: [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Alexander Gordeev
• Re: [PATCH] ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller
  • From: Arnd Bergmann
• [PATCH v5 2/5] AHCI: Move ahci_host_activate() function to libahci.c
  • From: Alexander Gordeev
• [PATCH v5 1/5] AHCI: Pass SCSI host template as arg to ahci_host_activate()
  • From: Alexander Gordeev
• [PATCH v5 3/5] AHCI: Move host activation code into ahci_host_activate()
  • From: Alexander Gordeev
• [PATCH v5 4/5] AHCI: Make few function names more descriptive
  • From: Alexander Gordeev
• [PATCH v5 5/5] AHCI: Do not read HOST_IRQ_STAT reg in multi-MSI mode
  • From: Alexander Gordeev
• [PATCH v5 0/5] AHCI: Optimize interrupt processing in multi-MSI mode
  • From: Alexander Gordeev
• Re: [PATCH 33/38] libata: use __scsi_print_command()
  • From: Tejun Heo
• Re: [PATCH 33/38] libata: use __scsi_print_command()
  • From: Hannes Reinecke
• Re: [PATCH 33/38] libata: use __scsi_print_command()
  • From: Tejun Heo
• Re: [PATCH] AHCI: Move host activation code into ahci_host_activate()
  • From: Tejun Heo
• [PATCH 33/38] libata: use __scsi_print_command()
  • From: Hannes Reinecke
• [PATCH] AHCI: Do not read HOST_IRQ_STAT reg in multi-MSI mode
  • From: Alexander Gordeev
• [PATCH] AHCI: Move host activation code into ahci_host_activate()
  • From: Alexander Gordeev
• Re: [PATCH v4 2/4] AHCI: Move host activation code into ahci_host_activate()
  • From: Alexander Gordeev
• Re: [PATCH] ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller
  • From: Suravee Suthikulpanit
• Re: [PATCH v4 4/4] AHCI: Do not read HOST_IRQ_STAT reg in multi-MSI mode
  • From: Tejun Heo
• Re: [PATCH v4 3/4] AHCI: Make few function names more descriptive
  • From: Tejun Heo
• Re: [PATCH v4 2/4] AHCI: Move host activation code into ahci_host_activate()
  • From: Tejun Heo
• Re: [PATCH] libata-sff: Fix controllers with no ctl port
  • From: Tejun Heo
• Re: [PATCH V2] ata: Disabling the async PM for JMicron chips
  • From: Aaron Lu
• [PATCH] libata-sff: Fix controllers with no ctl port
  • From: Ondrej Zary
• Re: [PATCH] pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller
  • From: Tejun Heo
• [PATCH v4 3/4] AHCI: Make few function names more descriptive
  • From: Alexander Gordeev
• [PATCH v4 2/4] AHCI: Move host activation code into ahci_host_activate()
  • From: Alexander Gordeev
• [PATCH v4 4/4] AHCI: Do not read HOST_IRQ_STAT reg in multi-MSI mode
  • From: Alexander Gordeev
• [PATCH v4 1/4] AHCI: Cleanup checking of multiple MSIs/SLM modes
  • From: Alexander Gordeev
• Re: [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Tejun Heo
• RE: [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Elliott, Robert (Server Storage)
• [PATCH] pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller
  • From: ccscott
• Re: Unable to complete boot with pata_sis
  • From: Daniele Forsi
• Re: [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Alexander Gordeev
• Re: [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Tejun Heo
• Re: [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Alexander Gordeev
• Re: [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Tejun Heo
• Re: [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Chuck Ebbert
• Re: [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Tejun Heo
• Re: [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Alexander Gordeev
• [PATCH V2] ata: Disabling the async PM for JMicron chips
  • From: Chuansheng Liu
• RE: [PATCH] ata: Disabling the async PM for JMicron chips
  • From: Liu, Chuansheng
• Re: [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Tejun Heo
• Re: [PATCH RESEND v3 2/6] AHCI: Move host activation code into ahci_host_activate()
  • From: Tejun Heo
• Re: [PATCH RESEND v3 2/6] AHCI: Move host activation code into ahci_host_activate()
  • From: Tejun Heo
• Re: [PATCH RESEND v3 3/6] AHCI: Make few function names more descriptive
  • From: Tejun Heo
• Re: [PATCH RESEND v3 1/6] AHCI: Cleanup checking of multiple MSIs/SLM modes
  • From: Tejun Heo
• Re: [PATCH] ahci_xgene: Fix the error print invalid resource for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Tejun Heo
• Re: [PATCH] libata: change ata_<foo>_printk routines to return void
  • From: Tejun Heo
• Re: [PATCH] ata: Disabling the async PM for JMicron chips
  • From: Tejun Heo
• Re: [PATCH v5 1/2] ahci-platform: Bump max number of clocks to 5
  • From: Tejun Heo
• Re: [PATCH v5 1/2] ahci-platform: Bump max number of clocks to 5
  • From: Hans de Goede
• [PATCH] ata: Disabling the async PM for JMicron chips
  • From: Chuansheng Liu
• [PATCH v5 1/2] ahci-platform: Bump max number of clocks to 5
  • From: Kumar Gala
• [PATCH 2/2] ata: qcom: Add device tree bindings information
  • From: Kumar Gala
• [PATCH] libata: change ata_<foo>_printk routines to return void
  • From: Joe Perches
• [PATCH] ahci_xgene: Fix the error print invalid resource for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Suman Tripathi
• [PATCH RESEND v3 5/6] AHCI: Optimize single IRQ interrupt processing
  • From: Alexander Gordeev
• [PATCH RESEND v3 6/6] AHCI: Do not read HOST_IRQ_STAT reg in multi-MSI mode
  • From: Alexander Gordeev
• [PATCH RESEND v3 1/6] AHCI: Cleanup checking of multiple MSIs/SLM modes
  • From: Alexander Gordeev
• [PATCH RESEND v3 3/6] AHCI: Make few function names more descriptive
  • From: Alexander Gordeev
• [PATCH RESEND v3 4/6] AHCI: Get rid of redundant arg to ahci_handle_port_interrupt()
  • From: Alexander Gordeev
• [PATCH RESEND v3 2/6] AHCI: Move host activation code into ahci_host_activate()
  • From: Alexander Gordeev
• [PATCH RESEND v3 0/6] AHCI: Optimize interrupt processing
  • From: Alexander Gordeev
• Re: [PATCH v3 6/5] AHCI: Do not read HOST_IRQ_STAT register in multi-MSI mode
  • From: Alexander Gordeev
• Re: [PATCH v3 6/5] AHCI: Do not read HOST_IRQ_STAT register in multi-MSI mode
  • From: Dan Williams
• Re: [PATCH v3 6/5] AHCI: Do not read HOST_IRQ_STAT register in multi-MSI mode
  • From: Alexander Gordeev
• [PATCH v3 6/5] AHCI: Do not read HOST_IRQ_STAT register in multi-MSI mode
  • From: Alexander Gordeev
• Re: [PATCH 4/4] pata_platform: Use 16-bit wide data transfer
  • From: Tejun Heo
• Re: [PATCH 4/4] pata_platform: Use 16-bit wide data transfer
  • From: Alexander Shiyan
• Re: [PATCH v2 0/5] AHCI: Optimize interrupt processing
  • From: Alexander Gordeev
• Re: [PATCH v4 1/3] ahci-platform: Bump max number of clocks to 5
  • From: Hans de Goede
• Re: [nForce4] - Repeatable issues with nForce 4
  • From: Robert Hancock
• Re: [PATCH v4 1/3] ahci-platform: Bump max number of clocks to 5
  • From: Kumar Gala
• Re: [nForce4] - Repeatable issues with nForce 4
  • From: Jacobo Pantoja
• Re: [PATCH] ahci_xgene: Fix the error print invalid resource for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Russell King - ARM Linux
• Re: [PATCH] ahci_xgene: Fix the error print invalid resource for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Tejun Heo
• Re: [nForce4] - Repeatable issues with nForce 4
  • From: Robert Hancock
• Re: [PATCH] ahci_xgene: Fix the error print invalid resource for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Tejun Heo
• Re: [nForce4] - Repeatable issues with nForce 4
  • From: Tejun Heo
• Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
  • From: Tejun Heo
• Re: [PATCH v2] AHCI: Optimize interrupt processing
  • From: Tejun Heo
• Re: [PATCH] ahci_xgene: Fix the error print invalid resource for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Tejun Heo
• Re: [PATCH] ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller
  • From: Hans de Goede
• [PATCH] ahci_xgene: Fix the error print invalid resource for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Suman Tripathi
• [PATCH] ahci_xgene: Fix the error print invalid resource for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Suman Tripathi
• Re: [PATCH] ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller
  • From: Olof Johansson
• Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v2] AHCI: Optimize interrupt processing
  • From: Alexander Gordeev
• Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
  • From: Alexander Gordeev
• RE: [Bug] 3.16 fwdownload failure on Marvell 88SE9125 sata controller
  • From: Patel, Gaurav
• Re: [Bug] 3.16 fwdownload failure on Marvell 88SE9125 sata controller
  • From: Ming Lei
• RE: [Bug] 3.16 fwdownload failure on Marvell 88SE9125 sata controller
  • From: Patel, Gaurav
• Re: [Bug] 3.16 fwdownload failure on Marvell 88SE9125 sata controller
  • From: Ming Lei
• Re: [RESEND: PATCH] ahci: add pcid for Marvel 0x9182 controller
  • From: Murali Karicheri
• RE: [Bug] 3.16 fwdownload failure on Marvell 88SE9125 sata controller
  • From: Patel, Gaurav
• Re: [PATCH] ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller
  • From: Hans de Goede
• Re: [Bug] 3.16 fwdownload failure on Marvell 88SE9125 sata controller
  • From: Ming Lei
• Re: [Bug] 3.16 fwdownload failure on Marvell 88SE9125 sata controller
  • From: Robert Hancock
• [PATCH] ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller
  • From: suravee.suthikulpanit
• [PATCH v4 3/3] ata: qcom: Add device tree bindings information
  • From: Kumar Gala
• [PATCH v4 2/3] ata: Add Qualcomm ARM SoC AHCI SATA host controller driver
  • From: Kumar Gala
• [PATCH v4 1/3] ahci-platform: Bump max number of clocks to 5
  • From: Kumar Gala
• Re: [Patch v3] 0/7] Remove mach-kirkwood
  • From: Jason Cooper
• Re: [PATCH v4 2/3] ata: Add Qualcomm ARM SoC AHCI SATA host controller driver
  • From: Hans de Goede
• Re: [PATCH v4 2/3] ata: Add Qualcomm ARM SoC AHCI SATA host controller driver
  • From: Tejun Heo
• [PATCH v4 1/3] ahci-platform: Bump max number of clocks to 5
  • From: Kumar Gala
• [PATCH v4 3/3] ata: qcom: Add device tree bindings information
  • From: Kumar Gala
• [PATCH v4 2/3] ata: Add Qualcomm ARM SoC AHCI SATA host controller driver
  • From: Kumar Gala
• [GIT PULL] libata fixes for v3.17-rc4
  • From: Tejun Heo
• Re: [PATCH 1/4] libata: consolidate ata_dev_classify()
  • From: Tejun Heo
• Re: [PATCH 1/4] libata: consolidate ata_dev_classify()
  • From: Hannes Reinecke
• Re: [PATCH 1/4] libata: consolidate ata_dev_classify()
  • From: Tejun Heo
• Re: [PATCH 1/4] libata: consolidate ata_dev_classify()
  • From: Hannes Reinecke
• Re: [PATCH v9 3/3] ahci_xgene: Fix the link down in first attempt for the APM X-Gene SoC AHCI SATA host controller driver.
  • From: Tejun Heo
• Re: [PATCH v9 2/3] ahci_xgene: Skip the PHY and clock initialization if already configured by the firmware.
  • From: Tejun Heo
• Re: [PATCH 3/4] libata-scsi: Update SATL for ZAC drives
  • From: Tejun Heo
• Re: [PATCH 1/4] libata: consolidate ata_dev_classify()
  • From: Tejun Heo
• Re: [RESEND: PATCH] ahci: add pcid for Marvel 0x9182 controller
  • From: Tejun Heo
• [RESEND: PATCH] ahci: add pcid for Marvel 0x9182 controller
  • From: Murali Karicheri
• [PATCH] ahci: add pcid for Marvel 0x9182 controller
  • From: Murali Karicheri
• Re: [RFC v2 6/6] pata_marvell: use async probe
  • From: Tejun Heo
• Re: [RFC v2 6/6] pata_marvell: use async probe
  • From: Alexander E. Patrakov
• [RFC v2 6/6] pata_marvell: use async probe
  • From: Luis R. Rodriguez
• Re: [Patch v3] 0/7] Remove mach-kirkwood
  • From: Rafael J. Wysocki
• Re: [Patch v3] 0/7] Remove mach-kirkwood
  • From: Andrew Lunn
• Re: [Patch v3] 0/7] Remove mach-kirkwood
  • From: Rafael J. Wysocki
• Re: [PATCH] ata: Disabling the async PM for JMicron chip 363/361
  • From: Tejun Heo
• Re: [PATCH] ata: Disabling the async PM for JMicron chip 363/361
  • From: Rafael J. Wysocki
• [Bug] 3.16 fwdownload failure on Marvell 88SE9125 sata controller
  • From: Ming Lei
• [PATCH] ata: Disabling the async PM for JMicron chip 363/361
  • From: Chuansheng Liu
• Re: [Patch v3] 2/7] ata: Remove ARCH_KIRKWOOD dependency
  • From: Tejun Heo
• Re: [PATCH] ahci: ahci_p5wdh_workaround - constify DMI table
  • From: Tejun Heo
• [PATCH] ahci: ahci_p5wdh_workaround - constify DMI table
  • From: Mathias Krause
• Re: [PATCH] libahci_platform: Staticize ahci_platform_<en/dis>able_phys()
  • From: Tejun Heo
• [PATCH] libahci_platform: Staticize ahci_platform_<en/dis>able_phys()
  • From: Fabio Estevam
• [Patch v3] 0/7] Remove mach-kirkwood
  • From: Andrew Lunn
• [Patch v3] 2/7] ata: Remove ARCH_KIRKWOOD dependency
  • From: Andrew Lunn
• Re: [PATCH 2/3] ata_piix: Add Device IDs for Intel 9 Series PCH
  • From: Tejun Heo
• Re: [PATCH 1/3] ahci: Add Device IDs for Intel 9 Series PCH
  • From: Tejun Heo
• [PATCH v9 2/3] ahci_xgene: Skip the PHY and clock initialization if already configured by the firmware.
  • From: Suman Tripathi
• [PATCH v9 3/3] ahci_xgene: Fix the link down in first attempt for the APM X-Gene SoC AHCI SATA host controller driver.
  • From: Suman Tripathi
• [PATCH v9 1/3] arm64: Fix the csr-mask for APM X-Gene SoC AHCI SATA PHY clock DTS node.
  • From: Suman Tripathi
• [PATCH v9 0/3] ahci_xgene: Fixes related to APM X-Gene SATA host controller driver.
  • From: Suman Tripathi
• [PATCH 2/3] ata_piix: Add Device IDs for Intel 9 Series PCH
  • From: James Ralston
• [PATCH 1/3] ahci: Add Device IDs for Intel 9 Series PCH
  • From: James Ralston
• Re: [PATCH v3 8/8] ARM: tegra: Add options for Tegra AHCI support to tegra_defconfig
  • From: Stephen Warren
• Re: [PATCH v8 3/3] ahci_xgene: Fix the link down in first attempt for the APM X-Gene SoC AHCI SATA host controller driver.
  • From: Tejun Heo
• Re: [PATCH v2] ata: ahci_tegra: Read calibration fuse
  • From: Tejun Heo
• Re: [PATCH v14 8/8] ARM: berlin: enable the eSATA interface on the BG2Q DMP
  • From: Sebastian Hesselbarth
• Re: [PATCH v14 7/8] ARM: berlin: add the AHCI node for the BG2Q
  • From: Sebastian Hesselbarth
• Re: [PATCH v2] ata: ahci_tegra: Read calibration fuse
  • From: Thierry Reding
• Invoke set_disk_ro() from user space
  • From: Yegor Yefremov
• Re: [PATCH 4/4] pata_platform: Use 16-bit wide data transfer
  • From: Alexander Shiyan
• [PATCH v2] ata: ahci_tegra: Read calibration fuse
  • From: Mikko Perttunen
• Re: [PATCH v3 2/8] ARM: tegra: Add SATA controller to Tegra124 device tree
  • From: Mikko Perttunen
• Re: [PATCH 4/4] pata_platform: Use 16-bit wide data transfer
  • From: One Thousand Gnomes
• Re: [PATCH 4/4] pata_platform: Use 16-bit wide data transfer
  • From: Tejun Heo
• Re: [PATCH v8 3/3] ahci_xgene: Fix the link down in first attempt for the APM X-Gene SoC AHCI SATA host controller driver.
  • From: Tejun Heo
• Re: [PATCH v3 2/8] ARM: tegra: Add SATA controller to Tegra124 device tree
  • From: Stephen Warren
• Re: [PATCH 1/3] libsas: modify SATA error handler
  • From: Dan Williams
• Re: [PATCH v8 2/3] ahci_xgene: Skip the PHY and clock initialization if already configured by the firmware.
  • From: Sergei Shtylyov
• [PATCH v8 3/3] ahci_xgene: Fix the link down in first attempt for the APM X-Gene SoC AHCI SATA host controller driver.
  • From: Suman Tripathi
• [PATCH v8 2/3] ahci_xgene: Skip the PHY and clock initialization if already configured by the firmware.
  • From: Suman Tripathi
• [PATCH v8 1/3] arm64: Fix the csr-mask for APM X-Gene SoC AHCI SATA PHY clock DTS node.
  • From: Suman Tripathi
• [PATCH v8 0/3] ahci_xgene: Fixes related to APM X-Gene SATA host controller driver.
  • From: Suman Tripathi
• Re: [PATCH 4/4] pata_platform: Use 16-bit wide data transfer
  • From: Alexander Shiyan
• Re: [PATCH 2/4] pata_platform: Remove useless irq_flags field
  • From: Tejun Heo
• Re: [PATCH 1/4] pata_of_platform: Remove "electra-ide" quirk
  • From: Tejun Heo
• Re: [PATCH 3/4] pata_platform: Use devm_ioremap_resource()
  • From: Tejun Heo
• Re: [PATCH 4/4] pata_platform: Use 16-bit wide data transfer
  • From: Tejun Heo
• [PATCH 1/4] pata_of_platform: Remove "electra-ide" quirk
  • From: Alexander Shiyan
• [PATCH 4/4] pata_platform: Use 16-bit wide data transfer
  • From: Alexander Shiyan
• [PATCH 3/4] pata_platform: Use devm_ioremap_resource()
  • From: Alexander Shiyan
• [PATCH 2/4] pata_platform: Remove useless irq_flags field
  • From: Alexander Shiyan
• Re: SATA disks disabled on boot
  • From: Tejun Heo
• Re: SATA disks disabled on boot
  • From: Nuno Magalhães
• [GIT PULL] libata fixes for v3.17-rc1
  • From: Tejun Heo
• ahci_tegra build failure in Linus' tree
  • From: Mark Brown
• Re: ahci_tegra build failure in Linus' tree
  • From: Tejun Heo
• Re: [PATCH] ata: ahci: tegra: fix build error
  • From: Tejun Heo
• Re: [PATCH] ata: ahci: tegra: fix build error
  • From: Felipe Balbi
• Re: [PATCH] ata: ahci: tegra: fix build error
  • From: Felipe Balbi
• Re: [PATCH] ata: ahci: tegra: fix build error
  • From: Stephen Warren
• [PATCH] ata: ahci: tegra: fix build error
  • From: Felipe Balbi
• Re: [PATCH v3 2/3] ata: Add Qualcomm ARM SoC AHCI SATA host controller driver
  • From: Kumar Gala
• Re: [PATCH v7 3/3] ahci_xgene: Fix the link down in first attempt for the APM X-Gene SoC AHCI SATA host controller driver.
  • From: Tejun Heo
• Re: [PATCH v7 3/3] ahci_xgene: Fix the link down in first attempt for the APM X-Gene SoC AHCI SATA host controller driver.
  • From: Tejun Heo
• Re: [PATCH] libata: Use dev_name() for request_irq() to distinguish devices
  • From: Tejun Heo
• Re: [PATCH v7 2/3] ahci_xgene: Skip the PHY and clock initialization if already configured by the firmware.
  • From: Tejun Heo
• [PATCH] libata: Use dev_name() for request_irq() to distinguish devices
  • From: Alexander Shiyan
• [PATCH v7 2/3] ahci_xgene: Skip the PHY and clock initialization if already configured by the firmware.
  • From: Suman Tripathi
• [PATCH v7 1/3] arm64: Fix the csr-mask for APM X-Gene SoC AHCI SATA PHY clock DTS node.
  • From: Suman Tripathi
• [PATCH v7 3/3] ahci_xgene: Fix the link down in first attempt for the APM X-Gene SoC AHCI SATA host controller driver.
  • From: Suman Tripathi
• [PATCH v7 0/3] ahci_xgene: Fixes related to APM X-Gene SATA host controller driver.
  • From: Suman Tripathi
• Re: SATA disks disabled on boot
  • From: Tejun Heo
• Re: [PATCH] ata: propagate return value of scc_wait_after_reset
  • From: Tejun Heo
• Re: [PATCH] ata: propagate return value of scc_wait_after_reset
  • From: Arjun Sreedharan
• Re: [PATCH] ata: propagate return value of scc_wait_after_reset
  • From: Tejun Heo
• Re: [PATCH] ata: propagate return value of scc_wait_after_reset
  • From: Tejun Heo
• [PATCH] ata: propagate return value of scc_wait_after_reset
  • From: Arjun Sreedharan
• Re: [PATCH] ata: ahci_tegra: Change include to fix compilation
  • From: Tejun Heo
• Re: [PATCH] ata: pata_samsung_cf: change ret type to signed
  • From: Tejun Heo
• Re: [PATCH v6 1/2] ahci_xgene: Removing NCQ support from the APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Tejun Heo
• [PATCH] ata: pata_samsung_cf: change ret type to signed
  • From: Arjun Sreedharan
• Re: [PATCH] ata: propagate return value of scc_wait_after_reset
  • From: Tejun Heo
• [PATCH] ata: propagate return value of scc_wait_after_reset
  • From: Arjun Sreedharan
• Re: [PATCH] ata: remove deprecated struct ahci_platform_data
  • From: Tejun Heo
• Re: [PATCH] ata: propagate return value of scc_wait_after_reset
  • From: Arjun Sreedharan
• Re: [PATCH] ata: propagate return value of scc_wait_after_reset
  • From: Tejun Heo
• Re: [PATCH] ata: propagate return value of scc_wait_after_reset
  • From: Arjun Sreedharan
• Re: [PATCH] ata: propagate return value of scc_wait_after_reset
  • From: Tejun Heo
• [PATCH] ata: propagate return value of scc_wait_after_reset
  • From: Arjun Sreedharan
• [PATCH] Drivers: ide: Remove typedef atiixp_ide_timing
  • From: Himangi Saraogi
• Re: [PATCH] ata: remove deprecated struct ahci_platform_data
  • From: Hans de Goede
• [PATCH] ata: remove deprecated struct ahci_platform_data
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: ahci_tegra: Read calibration fuse
  • From: Thierry Reding
• Re: [PATCH] ata: ahci_tegra: Change include to fix compilation
  • From: Thierry Reding
• [PATCH] ata: ahci_tegra: Read calibration fuse
  • From: Mikko Perttunen
• [PATCH] ata: ahci_tegra: Change include to fix compilation
  • From: Mikko Perttunen
• Re: [PATCH v6 2/2] arm64: Remove the clock and PHY reference from the APM X-Gene SoC AHCI SATA Host controller dts node.
  • From: Arnd Bergmann
• [PATCH v6 2/2] arm64: Remove the clock and PHY reference from the APM X-Gene SoC AHCI SATA Host controller dts node.
  • From: Suman Tripathi
• [PATCH v6 0/2] ahci_xgene: Fixes related to APM X-Gene SATA host controller driver.
  • From: Suman Tripathi
• [PATCH v6 1/2] ahci_xgene: Removing NCQ support from the APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Suman Tripathi
• RE: [PATCH 1/3] libsas: modify SATA error handler
  • From: Xiangliang Yu
• Re: [PATCH 1/3] libsas: modify SATA error handler
  • From: Dan Williams
• Re: Unable to complete boot with pata_sis
  • From: Daniele Forsi
• RE: [PATCH 1/3] libsas: modify SATA error handler
  • From: Xiangliang Yu
• Re: [PATCH 1/3] libsas: modify SATA error handler
  • From: Dan Williams
• RE: [PATCH 1/3] libsas: modify SATA error handler
  • From: Xiangliang Yu
• [GIT] IDE
  • From: David Miller
• [GIT PULL] libata changes for v3.17-rc1
  • From: Tejun Heo
• [PATCH v5 0/3] ahci_xgene: Fixes related to APM X-Gene SATA host controller driver.
  • From: Suman Tripathi
• [PATCH v5 1/3] ahci_xgene: Removing NCQ support from the APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Suman Tripathi
• [PATCH v5 2/3] arm64: Fix the csr-mask for APM X-Gene SoC AHCI SATA PHY clock DTS node.
  • From: Suman Tripathi
• [PATCH v5 3/3] ahci_xgene: Skip the PHY and clock initialization if already configured by the firmware.
  • From: Suman Tripathi
• Re: [PATCH v2] ata: libahci: Silence compiler warning on 64-bit
  • From: Tejun Heo
• [PATCH v2] ata: libahci: Silence compiler warning on 64-bit
  • From: Thierry Reding
• Re: [PATCH] ata: libahci: Make host flags unsigned long
  • From: Thierry Reding
• Re: [PATCH] ata: libahci: Make host flags unsigned long
  • From: Tejun Heo
• Re: [PATCH] ata: libahci: Make host flags unsigned long
  • From: Thierry Reding
• Re: [PATCH] ata: libahci: Make host flags unsigned long
  • From: Tejun Heo
• [PATCH] ata: libahci: Make host flags unsigned long
  • From: Thierry Reding
• Re: [PATCH v14 0/8] ARM: berlin: add AHCI support
  • From: Tejun Heo
• Re: [PATCH v13 0/8] ARM: berlin: add AHCI support
  • From: Sebastian Hesselbarth
• [PATCH v14 7/8] ARM: berlin: add the AHCI node for the BG2Q
  • From: Antoine Ténart
• [PATCH v14 6/8] Documentation: bindings: document the sub-nodes AHCI bindings
  • From: Antoine Ténart
• [PATCH v14 5/8] ata: ahci_platform: add a generic AHCI compatible
  • From: Antoine Ténart
• [PATCH v14 3/8] ata: libahci_platform: move port_map parameters into the AHCI structure
  • From: Antoine Ténart
• [PATCH v14 4/8] ata: libahci: allow to use multiple PHYs
  • From: Antoine Ténart
• [PATCH v14 8/8] ARM: berlin: enable the eSATA interface on the BG2Q DMP
  • From: Antoine Ténart
• [PATCH v14 1/8] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• [PATCH v14 0/8] ARM: berlin: add AHCI support
  • From: Antoine Ténart
• [PATCH v14 2/8] Documentation: bindings: add the Berlin SATA PHY
  • From: Antoine Ténart
• Re: [PATCH v13 0/8] ARM: berlin: add AHCI support
  • From: Antoine Ténart
• Re: [PATCH v13 0/8] ARM: berlin: add AHCI support
  • From: Tejun Heo
• Re: [PATCH v13 0/8] ARM: berlin: add AHCI support
  • From: Tejun Heo
• [PATCH v13 2/8] Documentation: bindings: add the Berlin SATA PHY
  • From: Antoine Ténart
• [PATCH v13 3/8] ata: libahci_platform: move port_map parameters into the AHCI structure
  • From: Antoine Ténart
• [PATCH v13 5/8] ata: ahci_platform: add a generic AHCI compatible
  • From: Antoine Ténart
• [PATCH v13 8/8] ARM: berlin: enable the eSATA interface on the BG2Q DMP
  • From: Antoine Ténart
• [PATCH v13 7/8] ARM: berlin: add the AHCI node for the BG2Q
  • From: Antoine Ténart
• [PATCH v13 6/8] Documentation: bindings: document the sub-nodes AHCI bindings
  • From: Antoine Ténart
• [PATCH v13 4/8] ata: libahci: allow to use multiple PHYs
  • From: Antoine Ténart
• [PATCH v13 1/8] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• [PATCH v13 0/8] ARM: berlin: add AHCI support
  • From: Antoine Ténart
• Re: [PATCH v11 3/8] ata: libahci_platform: move port_map parameters into the AHCI structure
  • From: Tejun Heo
• Re: [PATCH v11 3/8] ata: libahci_platform: move port_map parameters into the AHCI structure
  • From: Antoine Ténart
• Re: [PATCH] ahci: imx: add missing clk_disable_unprepare() on error in imx_sata_enable()
  • From: Tejun Heo
• Re: [PATCH v11 3/8] ata: libahci_platform: move port_map parameters into the AHCI structure
  • From: Tejun Heo
• Re: Unable to complete boot with pata_sis
  • From: One Thousand Gnomes
• Re: [PATCH 4/4] sd: Optionally attach to ZBC devices
  • From: Christoph Hellwig
• Re: [PATCH v11 4/8] ata: libahci: allow to use multiple PHYs
  • From: Kishon Vijay Abraham I
• Re: [PATCH v11 3/8] ata: libahci_platform: move port_map parameters into the AHCI structure
  • From: Antoine Ténart
• [PATCH 1/4] libata: consolidate ata_dev_classify()
  • From: Hannes Reinecke
• [PATCH 2/4] libata: Implement ATA_DEV_ZAC
  • From: Hannes Reinecke
• [PATCH 3/4] libata-scsi: Update SATL for ZAC drives
  • From: Hannes Reinecke
• [PATCH 4/4] sd: Optionally attach to ZBC devices
  • From: Hannes Reinecke
• [PATCHv4 0/4] Initial SMR drive support
  • From: Hannes Reinecke
• Re: [PATCH v12 4/8] ata: libahci: allow to use multiple PHYs
  • From: Antoine Ténart
• Re: [PATCH 4/4] sd: Optionally attach to ZBC devices
  • From: Hannes Reinecke
• Re: [PATCH 3/4] libata-scsi: Update SATL for ZAC drives
  • From: Hannes Reinecke
• Re: [PATCH] ahci: imx: add missing clk_disable_unprepare() on error in imx_sata_enable()
  • From: Shawn Guo
• [PATCH] ahci: imx: add missing clk_disable_unprepare() on error in imx_sata_enable()
  • From: weiyj_lk
• Re: [PATCH 4/4] sd: Optionally attach to ZBC devices
  • From: Christoph Hellwig
• Re: [PATCH 3/4] libata-scsi: Update SATL for ZAC drives
  • From: Christoph Hellwig
• [PATCH 2/4] libata: Implement ATA_DEV_ZAC
  • From: Hannes Reinecke
• [PATCH 1/4] libata: consolidate ata_dev_classify()
  • From: Hannes Reinecke
• [PATCHv3 0/4] Initial SMR drive support
  • From: Hannes Reinecke
• [PATCH 4/4] sd: Optionally attach to ZBC devices
  • From: Hannes Reinecke
• [PATCH 3/4] libata-scsi: Update SATL for ZAC drives
  • From: Hannes Reinecke
• Re: [PATCH v11 3/8] ata: libahci_platform: move port_map parameters into the AHCI structure
  • From: Tejun Heo
• Re: [PATCH v4 0/4]ata: Fixes related to APM X-Gene SATA host controller driver.
  • From: Tejun Heo
• Re: [PATCH v12 4/8] ata: libahci: allow to use multiple PHYs
  • From: Tejun Heo
• Re: [PATCH v4 0/4]ata: Fixes related to APM X-Gene SATA host controller driver.
  • From: Tejun Heo
• Re: [PATCH v4 2/4] arm64: Remove the clock and PHY reference from the APM X-Gene SoC AHCI SATA Host controller dts node.
  • From: Arnd Bergmann
• Re: [PATCH v12 4/8] ata: libahci: allow to use multiple PHYs
  • From: Hans de Goede
• [PATCH v12 4/8] ata: libahci: allow to use multiple PHYs
  • From: Antoine Ténart
• Re: [PATCH v11 4/8] ata: libahci: allow to use multiple PHYs
  • From: Antoine Ténart
• [PATCH v4 1/4] ata: Fix the watermark threshold for the APM X-Gene SATA host controller driver.
  • From: Suman Tripathi
• [PATCH v4 3/4] ata: Use correct OOB tunning parameters for APM X-Gene SoC AHCI SATA Host controller driver.
  • From: Suman Tripathi
• [PATCH v4 2/4] arm64: Remove the clock and PHY reference from the APM X-Gene SoC AHCI SATA Host controller dts node.
  • From: Suman Tripathi
• [PATCH v4 4/4] ata: Removing NCQ support from the APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Suman Tripathi
• [PATCH v4 0/4]ata: Fixes related to APM X-Gene SATA host controller driver.
  • From: Suman Tripathi
• Re: [PATCH v11 4/8] ata: libahci: allow to use multiple PHYs
  • From: Tejun Heo
• Re: [PATCH v11 4/8] ata: libahci: allow to use multiple PHYs
  • From: Hans de Goede
• sata_sil24 - Silicon Image 3124 cards lock-up machine with 3.16-rc6 (work with 3.2), MSI works with neither kernel
  • From: Tim Small
• Unable to complete boot with pata_sis
  • From: Daniele Forsi
• Re: [PATCH 1/2] libata: Fix scsi_host can_queue issue in ata_qc_new()
  • From: Dan Williams
• Re: [PATCH 2/2] libata: Fix NULL pointer of scsi_host in ata_port
  • From: Jesse Brandeburg
• [PATCH v11 2/8] Documentation: bindings: add the Berlin SATA PHY
  • From: Antoine Ténart
• [PATCH v11 1/8] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• [PATCH v11 3/8] ata: libahci_platform: move port_map parameters into the AHCI structure
  • From: Antoine Ténart
• [PATCH v11 6/8] Documentation: bindings: document the sub-nodes AHCI bindings
  • From: Antoine Ténart
• [PATCH v11 8/8] ARM: berlin: enable the eSATA interface on the BG2Q DMP
  • From: Antoine Ténart
• [PATCH v11 4/8] ata: libahci: allow to use multiple PHYs
  • From: Antoine Ténart
• [PATCH v11 5/8] ata: ahci_platform: add a generic AHCI compatible
  • From: Antoine Ténart
• [PATCH v11 7/8] ARM: berlin: add the AHCI node for the BG2Q
  • From: Antoine Ténart
• [PATCH v11 0/8] ARM: berlin: add AHCI support
  • From: Antoine Ténart
• Marvell 88SE9130 hardware limited feature: PMP only 5 drives on 1 port maximum?
  • From: Crashplan Pro
• Re: [PATCH libata/for-3.16-fixes] libata: introduce ata_host->n_tags to avoid oops on SAS controllers
  • From: Tejun Heo
• Re: [PATCH libata/for-3.16-fixes] libata: introduce ata_host->n_tags to avoid oops on SAS controllers
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH libata/for-3.16-fixes] libata: introduce ata_host->n_tags to avoid oops on SAS controllers
  • From: Tejun Heo
• Re: [PATCH libata/for-3.16-fixes] libata: introduce ata_host->n_tags to avoid oops on SAS controllers
  • From: Bartlomiej Zolnierkiewicz
• [GIT PULL] a libata regression fix for v3.16-rc6
  • From: Tejun Heo
• [PATCH libata/for-3.16-fixes] libata: introduce ata_host->n_tags to avoid oops on SAS controllers
  • From: Tejun Heo
• Re: [PATCH 2/2] libata: Fix NULL pointer of scsi_host in ata_port
  • From: Alexey Kardashevskiy
• Re: [PATCH 2/2] libata: Fix NULL pointer of scsi_host in ata_port
  • From: Mike Qiu
• Re: [PATCH 2/2] libata: Fix NULL pointer of scsi_host in ata_port
  • From: Mike Qiu
• Re: [PATCH 1/2] libata: Fix scsi_host can_queue issue in ata_qc_new()
  • From: Mike Qiu
• Re: [PATCH 2/2] libata: Fix NULL pointer of scsi_host in ata_port
  • From: Peter Hurley
• Re: [PATCH v5 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Stephen Warren
• Re: [PATCH 2/2] libata: Fix NULL pointer of scsi_host in ata_port
  • From: Tejun Heo
• RE: [PATCH 4/4] sd: Handle ZBC drives correctly
  • From: John Utz
• Re: [PATCH 4/4] sd: Handle ZBC drives correctly
  • From: Christoph Hellwig
• Re: [PATCH] ahci: st: Make of_device_id array const
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: Fix scsi_host can_queue issue in ata_qc_new()
  • From: Tejun Heo
• Re: [PATCH 2/2] libata: Fix NULL pointer of scsi_host in ata_port
  • From: Mike Qiu
• Re: [PATCH] ahci: st: Make of_device_id array const
  • From: Lee Jones
• [PATCH 2/2] libata: Fix NULL pointer of scsi_host in ata_port
  • From: Mike Qiu
• [PATCH 1/2] libata: Fix scsi_host can_queue issue in ata_qc_new()
  • From: Mike Qiu
• [PATCH] ahci: st: Make of_device_id array const
  • From: Kiran Padwal
• Re: [PATCH] sata_sil24: Identify which card suffered IRQ status error
  • From: Sergei Shtylyov
• Re: [PATCH] sata_sil24: Identify which card suffered IRQ status error
  • From: Tejun Heo
• [PATCH] sata_sil24: Identify which card suffered IRQ status error
  • From: Tim Small
• [GIT] IDE
  • From: David Miller
• Re: [GIT PULL] libata fixes for v3.16-rc6
  • From: Linus Torvalds
• Re: [GIT PULL] libata fixes for v3.16-rc6
  • From: Tejun Heo
• Re: [GIT PULL] libata fixes for v3.16-rc6
  • From: Linus Torvalds
• Re: [PATCH 4/4] sd: Handle ZBC drives correctly
  • From: Hannes Reinecke
• RE: [PATCH 4/4] sd: Handle ZBC drives correctly
  • From: John Utz
• RE: [PATCH 4/4] sd: Handle ZBC drives correctly
  • From: John Utz
• Re: [PATCH 4/4] sd: Handle ZBC drives correctly
  • From: Christoph Hellwig
• [GIT PULL] libata fixes for v3.16-rc6
  • From: Tejun Heo
• Re: [PATCH 4/4] sd: Handle ZBC drives correctly
  • From: Hannes Reinecke
• Re: [PATCH 4/4] sd: Handle ZBC drives correctly
  • From: Christoph Hellwig
• Re: [PATCH v10 0/8] ARM: berlin: add AHCI support
  • From: Antoine Ténart
• Re: [PATCH v10 2/8] Documentation: bindings: add the Berlin SATA PHY
  • From: Antoine Ténart
• Re: [PATCH v10 3/8] ata: libahci_platform: move port_map parameters into the AHCI structure
  • From: Antoine Ténart
• Re: [PATCH v10 4/8] ata: libahci: allow to use multiple PHYs
  • From: Antoine Ténart
• [PATCH 4/4] sd: Handle ZBC drives correctly
  • From: Hannes Reinecke
• [PATCH 2/4] libata: Implement ATA_DEV_ZAC
  • From: Hannes Reinecke
• [PATCH 1/4] libata: consolidate ata_dev_classify()
  • From: Hannes Reinecke
• [PATCHv2 0/4] Initial SMR drive support
  • From: Hannes Reinecke
• [PATCH 3/4] libata-scsi: Update SATL for ZAC drives
  • From: Hannes Reinecke
• Re: [PATCH v10 0/8] ARM: berlin: add AHCI support
  • From: Hans de Goede
• Re: [PATCH v10 0/8] ARM: berlin: add AHCI support
  • From: Hans de Goede
• Re: [PATCH v10 0/8] ARM: berlin: add AHCI support
  • From: Sebastian Hesselbarth
• Re: [PATCH 1/1] Add support for the Promise FastTrak TX8660 SATA HBA (ahci mode)
  • From: Tejun Heo
• Re: [PATCH v5 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Tejun Heo
• Re: [PATCH v10 2/8] Documentation: bindings: add the Berlin SATA PHY
  • From: Sergei Shtylyov
• Re: [PATCH v5 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Thierry Reding
• Re: [PATCH v10 5/8] ata: ahci_platform: add a generic AHCI compatible
  • From: Hans de Goede
• Re: [PATCH v10 0/8] ARM: berlin: add AHCI support
  • From: Tejun Heo
• Re: [PATCH v10 3/8] ata: libahci_platform: move port_map parameters into the AHCI structure
  • From: Tejun Heo
• Re: [PATCH v10 4/8] ata: libahci: allow to use multiple PHYs
  • From: Lothar Waßmann
• Re: [PATCH v10 1/8] phy: add a driver for the Berlin SATA PHY
  • From: Varka Bhadram
• [PATCH v10 3/8] ata: libahci_platform: move port_map parameters into the AHCI structure
  • From: Antoine Ténart
• [PATCH v10 4/8] ata: libahci: allow to use multiple PHYs
  • From: Antoine Ténart
• [PATCH v10 5/8] ata: ahci_platform: add a generic AHCI compatible
  • From: Antoine Ténart
• [PATCH v10 7/8] ARM: berlin: add the AHCI node for the BG2Q
  • From: Antoine Ténart
• [PATCH v10 6/8] Documentation: bindings: document the sub-nodes AHCI bindings
  • From: Antoine Ténart
• [PATCH v10 8/8] ARM: berlin: enable the eSATA interface on the BG2Q DMP
  • From: Antoine Ténart
• [PATCH v10 2/8] Documentation: bindings: add the Berlin SATA PHY
  • From: Antoine Ténart
• [PATCH v10 1/8] phy: add a driver for the Berlin SATA PHY
  • From: Antoine Ténart
• [PATCH v10 0/8] ARM: berlin: add AHCI support
  • From: Antoine Ténart
• Re: [PATCH v5 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Mikko Perttunen
• Re: [PATCH v5 7/8] ata: Add support for the Tegra124 SATA controller
  • From: Mikko Perttunen
• Re: [PATCH v5 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Hans de Goede
• Re: [PATCH v5 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Hans de Goede
• Re: [PATCH v5 7/8] ata: Add support for the Tegra124 SATA controller
  • From: Hans de Goede
• Re: [PATCH v5 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Mikko Perttunen
• [PATCH v5 7/8] ata: Add support for the Tegra124 SATA controller
  • From: Mikko Perttunen
• [PATCH v5 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Mikko Perttunen
• Re: [PATCH v4 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Hans de Goede
• Re: [PATCH v4 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Hans de Goede
• Re: [PATCH v4 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Mikko Perttunen
• Re: [PATCH v4 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Thierry Reding
• Re: [PATCH v4 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Hans de Goede
• Re: [PATCH v4 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Mikko Perttunen
• Re: [PATCH v4 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Thierry Reding
• Re: [PATCH v4 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Hans de Goede
• Re: SATA disks disabled on boot
  • From: Nuno Magalhães
• Re: SATA disks disabled on boot
  • From: Nuno Magalhães
• Re: [PATCH v4 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Thierry Reding
• [PATCH v8 2/2] phy: qcom: Add device tree bindings for IPQ806x SATA PHY
  • From: Kumar Gala
• [PATCH v8 1/2] phy: qcom: Add driver for QCOM IPQ806x SATA PHY
  • From: Kumar Gala
• Re: [PATCH v4 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Hans de Goede
• Re: [PATCH v4 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Thierry Reding
• Re: [PATCH v4 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Hans de Goede
• Re: [PATCH v3 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Mikko Perttunen
• Re: [PATCH v3 7/8] ata: Add support for the Tegra124 SATA controller
  • From: Thierry Reding
• [PATCH v4 7/8] ata: Add support for the Tegra124 SATA controller
  • From: Mikko Perttunen
• [PATCH v4 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Mikko Perttunen
• Re: [PATCH v3 7/8] ata: Add support for the Tegra124 SATA controller
  • From: Hans de Goede
• Re: [PATCH v3 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Varka Bhadram
• [PATCH v3 1/8] of: Add NVIDIA Tegra SATA controller binding
  • From: Mikko Perttunen
• [PATCH v3 3/8] ARM: tegra: Add SATA and SATA power to Jetson TK1 device tree
  • From: Mikko Perttunen
• [PATCH v3 5/8] clk: tegra: Add SATA clocks to Tegra124 initialization table
  • From: Mikko Perttunen
• [PATCH v3 2/8] ARM: tegra: Add SATA controller to Tegra124 device tree
  • From: Mikko Perttunen
• [PATCH v3 6/8] ata: ahci_platform: Increase AHCI_MAX_CLKS to 4
  • From: Mikko Perttunen
• [PATCH v3 4/8] clk: tegra: Enable hardware control of SATA PLL
  • From: Mikko Perttunen
• [PATCH v3 7/8] ata: Add support for the Tegra124 SATA controller
  • From: Mikko Perttunen
• [PATCH v3 8/8] ARM: tegra: Add options for Tegra AHCI support to tegra_defconfig
  • From: Mikko Perttunen
• [PATCH v3 0/8] Serial ATA support for NVIDIA Tegra124
  • From: Mikko Perttunen
• [PATCH] phy: qcom-apq8064: fix possible timeout without check
  • From: Srinivas Kandagatla
• Re: [PATCH v3 2/3] ata: Add Qualcomm ARM SoC AHCI SATA host controller driver
  • From: kiran padwal
• Re: [PATCH v4 1/2] phy: qcom: Add driver for QCOM APQ8064 SATA PHY
  • From: Srinivas Kandagatla
• Re: [PATCH v7 1/2] phy: qcom: Add driver for QCOM IPQ806x SATA PHY
  • From: Kishon Vijay Abraham I
• Re: [PATCH v4 1/2] phy: qcom: Add driver for QCOM APQ8064 SATA PHY
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v7 1/2] phy: qcom: Add driver for QCOM IPQ806x SATA PHY
  • From: Kumar Gala
• Re: [PATCH v5 1/2] phy: qcom: Add driver for QCOM IPQ806x SATA PHY
  • From: Kumar Gala
• Re: [PATCH v5 1/2] phy: qcom: Add driver for QCOM IPQ806x SATA PHY
  • From: Kumar Gala
• [PATCH v6 2/2] phy: qcom: Add device tree bindings for IPQ806x SATA PHY
  • From: Kumar Gala
• [PATCH v6 1/2] phy: qcom: Add driver for QCOM IPQ806x SATA PHY
  • From: Kumar Gala
• Re: [PATCH v5 1/2] phy: qcom: Add driver for QCOM IPQ806x SATA PHY
  • From: Kishon Vijay Abraham I
• Re: [PATCH] libata-eh.c should handle AMNF error condition (error byte bit 0, usually code 0x01) in libata-eh.c along with UNC as a media error so SCSI stack can handle it properly (translation code 0x01 is already present in libata-scsi.c) but was never passed down due to lack of handling in EH.
  • From: Tejun Heo
• Re: [PATCH v5 1/2] phy: qcom: Add driver for QCOM IPQ806x SATA PHY
  • From: Kishon Vijay Abraham I
• Re: [PATCH v5 1/2] phy: qcom: Add driver for QCOM IPQ806x SATA PHY
  • From: Kumar Gala
• Re: [PATCH v2 6/7] ata: Add support for the Tegra124 SATA controller
  • From: Thierry Reding
• Re: [PATCH v2 6/7] ata: Add support for the Tegra124 SATA controller
  • From: Mikko Perttunen
• Re: [PATCH v2 6/7] ata: Add support for the Tegra124 SATA controller
  • From: Hans de Goede
• Re: [PATCH v2 6/7] ata: Add support for the Tegra124 SATA controller
  • From: Mikko Perttunen
• [PATCH] libata-eh.c should handle AMNF error condition (error byte bit 0, usually code 0x01) in libata-eh.c along with UNC as a media error so SCSI stack can handle it properly (translation code 0x01 is already present in libata-scsi.c) but was never passed down due to lack of handling in EH.
  • From: Alexey Asemov
• Re: SATA disks disabled on boot
  • From: Nuno Magalhães
• Re: [PATCH] libata: handle IDE AMNF errors in the EH path
  • From: Alexey Asemov (Alex/AT)
• Monkey-patching libahci
  • From: Ian Pilcher
• Re: [PATCH v4] libata: support the ata host which implements a queue depth less than 32
  • From: Tejun Heo
• Re: SATA disks disabled on boot
  • From: Tejun Heo
• Re: [PATCH v4] libata: support the ata host which implements a queue depth less than 32
  • From: Dan Williams
• Re: [PATCH] libata: handle IDE AMNF errors in the EH path
  • From: Tejun Heo
• Re: [PATCH v3] MAINTAINERS: Add Hans de Goede as ahci-platform maintainer
  • From: Tejun Heo
• [PATCH v3] MAINTAINERS: Add Hans de Goede as ahci-platform maintainer
  • From: Hans de Goede
• Re: [PATCH v2] MAINTAINERS: Add Hans de Goede as ahci-platform maintainer
  • From: Hans de Goede
• Re: [PATCH v2 6/7] ata: Add support for the Tegra124 SATA controller
  • From: Hans de Goede
• Re: [PATCH v2] MAINTAINERS: Add Hans de Goede as ahci-platform maintainer
  • From: Sergei Shtylyov
• [PATCH v2] MAINTAINERS: Add Hans de Goede as ahci-platform maintainer
  • From: Hans de Goede
• [PATCH v2] MAINTAINERS: Add Hans de Goede as ahci-platform maintainer
  • From: Hans de Goede
• [PATCH] MAINTAINERS: Add Hans de Goede as ahci-platform maintainer
  • From: Hans de Goede
• [PATCH v4 2/2] phy: qcom: Add APQ8064 SATA PHY device tree bindings
  • From: Srinivas Kandagatla
• [PATCH v4 1/2] phy: qcom: Add driver for QCOM APQ8064 SATA PHY
  • From: Srinivas Kandagatla
• [PATCH v4 0/2] phy: qcom: Add driver for QCOM APQ8064 SATA PHY
  • From: Srinivas Kandagatla
• Re: [PATCH] phy: qcom: Add driver for QCOM APQ8064 SATA PHY
  • From: kiran padwal
• Re: [PATCH v3 0/2] phy: qcom: Add driver for QCOM APQ8064 SATA PHY
  • From: Srinivas Kandagatla
• Re: [PATCH v3 0/2] phy: qcom: Add driver for QCOM APQ8064 SATA PHY
  • From: Kishon Vijay Abraham I
• [PATCH v3 2/2] phy: qcom: Update APQ8064 PHY device tree bindings
  • From: Srinivas Kandagatla
• [PATCH v3 1/2] phy: qcom: Add driver for QCOM APQ8064 SATA PHY
  • From: Srinivas Kandagatla