tested-by: Kiran Padwal <kiran.padwal@xxxxxxxxxxxxxxx> This driver tested with APQ806x SATA PHY Driver. On Wed, Jun 18, 2014 at 12:06 AM, Kumar Gala <galak@xxxxxxxxxxxxxx> wrote: > Add support for the Qualcomm AHCI SATA controller that exists on several > SoC and specifically the IPQ806x family of chips. The IPQ806x SATA support > requires the associated IPQ806x SATA PHY Driver to be enabled as well. > > Signed-off-by: Kumar Gala <galak@xxxxxxxxxxxxxx> > --- > v3: > * Added comment about suspend/resume not supported > * Fixup ahci_platform_init_host for upstream change to interface > * cleanup error handling of rxoob clk, moved to devm_clk_get/put > > v2: > * Fixed MODULE_LICENSE to be GPL v2 > > drivers/ata/Kconfig | 10 ++++++ > drivers/ata/Makefile | 1 + > drivers/ata/ahci_qcom.c | 90 +++++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 101 insertions(+) > create mode 100644 drivers/ata/ahci_qcom.c > > diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig > index 7671dba..aa88648 100644 > --- a/drivers/ata/Kconfig > +++ b/drivers/ata/Kconfig > @@ -132,6 +132,16 @@ config AHCI_MVEBU > > If unsure, say N. > > +config AHCI_QCOM > + tristate "Qualcomm AHCI SATA support" > + depends on ARCH_QCOM > + help > + This option enables support for AHCI SATA controller > + integrated into Qualcomm ARM SoC chipsets. For more > + information please refer to http://www.qualcomm.com/chipsets. > + > + If unsure, say N. > + > config AHCI_SUNXI > tristate "Allwinner sunxi AHCI SATA support" > depends on ARCH_SUNXI > diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile > index 5a02aee..15401e9 100644 > --- a/drivers/ata/Makefile > +++ b/drivers/ata/Makefile > @@ -13,6 +13,7 @@ obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o > obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o > obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o > obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o libahci.o libahci_platform.o > +obj-$(CONFIG_AHCI_QCOM) += ahci_qcom.o libahci.o libahci_platform.o > obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o libahci_platform.o > obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o libahci_platform.o > obj-$(CONFIG_AHCI_XGENE) += ahci_xgene.o libahci.o libahci_platform.o > diff --git a/drivers/ata/ahci_qcom.c b/drivers/ata/ahci_qcom.c > new file mode 100644 > index 0000000..412e878 > --- /dev/null > +++ b/drivers/ata/ahci_qcom.c > @@ -0,0 +1,90 @@ > +/* > + * Qualcomm ARM SoC AHCI SATA platform driver > + * > + * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov > + * > + * Copyright (c) 2014, The Linux Foundation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/pm.h> > +#include <linux/device.h> > +#include <linux/platform_device.h> > +#include <linux/libata.h> > +#include <linux/ahci_platform.h> > +#include "ahci.h" > + > +static const struct ata_port_info qcom_ahci_port_info = { > + .flags = AHCI_FLAG_COMMON, > + .pio_mask = ATA_PIO4, > + .udma_mask = ATA_UDMA6, > + .port_ops = &ahci_platform_ops, > +}; > + > +static int qcom_ahci_probe(struct platform_device *pdev) > +{ > + struct ahci_host_priv *hpriv; > + struct clk *rxoob_clk; > + int rc; > + > + hpriv = ahci_platform_get_resources(pdev); > + if (IS_ERR(hpriv)) > + return PTR_ERR(hpriv); > + > + /* Try and set the rxoob clk to 100Mhz */ > + rxoob_clk = devm_clk_get(&pdev->dev, "rxoob"); > + if (IS_ERR(rxoob_clk)) > + return PTR_ERR(rxoob_clk); > + > + rc = clk_set_rate(rxoob_clk, 100000000); > + if (rc) > + return rc; > + > + devm_clk_put(&pdev->dev, rxoob_clk); > + > + rc = ahci_platform_enable_resources(hpriv); > + if (rc) > + return rc; > + > + rc = ahci_platform_init_host(pdev, hpriv, &qcom_ahci_port_info, > + 0, 0, 0); > + if (rc) > + goto disable_resources; > + > + return 0; > +disable_resources: > + ahci_platform_disable_resources(hpriv); > + return rc; > +} > + > +static const struct of_device_id qcom_ahci_of_match[] = { > + { .compatible = "qcom,msm-ahci", }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, qcom_ahci_of_match); > + > +static struct platform_driver qcom_ahci_driver = { > + .probe = qcom_ahci_probe, > + .remove = ata_platform_remove_one, > + .driver = { > + .name = "qcom_ahci_qcom", > + .owner = THIS_MODULE, > + .of_match_table = qcom_ahci_of_match, > + }, > + /* suspend/resume not currently supported */ > +}; > +module_platform_driver(qcom_ahci_driver); > + > +MODULE_DESCRIPTION("Qualcomm AHCI SATA platform driver"); > +MODULE_LICENSE("GPL v2"); > +MODULE_ALIAS("ahci:qcom"); > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > hosted by The Linux Foundation > > -- > To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
