Kishon already took patches 1-2. Following the build failure, I tested with various configurations including the one use when the failure occured. Changes since v13: - fixed compilation error Changes since v12: - rebased on top of libata/for-3.17 (with libata/for-3.16-fixes pulled in) - removed the host_flags argument - added a comment in ahci_host_priv for the inputs Changes since v11: - fixed a small issue in libahci Changes since v10: - made a 1:1 relation between PHYs and ports numbers - added a SoC specific compatible when using 'generic-ahci' Changes since v9: - moved port_map parameters into the AHCI structure Changes since v8: - stopped reset the controller from the PHY driver - removed fixed array sizes - got rid of the custom to_berlin_sata_phy_priv() macro - added dependency to HAS_IOMEM Changes since v7: - got back to the each PHY as a sub-node representation - renamed the power bit in the PHY driver Changes since v6: - added the 'clocks' property and support in the PHY driver - updated the PHY compatible Changes since v5: - rebased on top of v3.16-rc1 - added the 'clocks' property in the sata node Changes since v4: - updated PHY driver as tristate - handled the case were no SATA port is enabled - updated the compatible to a generic one - cosmetic fixups Changes since v3: - moved all PHY operations to the PHY driver - removed PHY sub-nodes - removed the custom Berlin AHCI driver and switched to ahci_platform - added multiple PHYs support to the libahci_platform Changes since v2: - modeled each PHY as a sub-node - cosmetic fixups Changes since v1: - added a PHY driver, allowing to enable each port individually and removed the 'force-port-map' property - made the drivers a bit less magic :) - wrote a function to select and configure registers in the AHCI driver - removed BG2 / BG2CD nodes Antoine Ténart (8): phy: add a driver for the Berlin SATA PHY Documentation: bindings: add the Berlin SATA PHY ata: libahci_platform: move port_map parameters into the AHCI structure ata: libahci: allow to use multiple PHYs ata: ahci_platform: add a generic AHCI compatible Documentation: bindings: document the sub-nodes AHCI bindings ARM: berlin: add the AHCI node for the BG2Q ARM: berlin: enable the eSATA interface on the BG2Q DMP .../devicetree/bindings/ata/ahci-platform.txt | 41 +++ .../devicetree/bindings/phy/berlin-sata-phy.txt | 34 +++ arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 8 + arch/arm/boot/dts/berlin2q.dtsi | 39 +++ drivers/ata/acard-ahci.c | 2 +- drivers/ata/ahci.c | 3 +- drivers/ata/ahci.h | 17 +- drivers/ata/ahci_da850.c | 3 +- drivers/ata/ahci_imx.c | 3 +- drivers/ata/ahci_mvebu.c | 3 +- drivers/ata/ahci_platform.c | 8 +- drivers/ata/ahci_st.c | 2 +- drivers/ata/ahci_sunxi.c | 8 +- drivers/ata/ahci_tegra.c | 3 +- drivers/ata/ahci_xgene.c | 6 +- drivers/ata/libahci.c | 19 +- drivers/ata/libahci_platform.c | 202 +++++++++++---- drivers/ata/sata_highbank.c | 2 +- drivers/phy/Kconfig | 7 + drivers/phy/Makefile | 1 + drivers/phy/phy-berlin-sata.c | 284 +++++++++++++++++++++ include/linux/ahci_platform.h | 5 +- 22 files changed, 605 insertions(+), 95 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/berlin-sata-phy.txt create mode 100644 drivers/phy/phy-berlin-sata.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html