Hi, On Wednesday 18 June 2014 12:03 AM, Kumar Gala wrote: > Add a PHY driver for uses with AHCI based SATA controller driver on the > IPQ806x family of SoCs. > > Signed-off-by: Kumar Gala <galak@xxxxxxxxxxxxxx> > --- > v5: > * Fix copy/paste error when killing qcom_ipq806x_sata_delay_us > > v4: > * removed qcom_ipq806x_sata_delay_us as it was only used one > > v3: > * Added Kconfig HAS_IOMEM dep > * re-ordered probe function so phy_provider_register is last > > v2: > * dropped unused dev pointer in struct qcom_ipq806x_sata_phy > * remove unnecessary reg initializaiton > * Removed unneeded error message > * Added remove function to disable the clock > > drivers/phy/Kconfig | 7 ++ > drivers/phy/Makefile | 1 + > drivers/phy/phy-qcom-ipq806x-sata.c | 206 ++++++++++++++++++++++++++++++++++++ > 3 files changed, 214 insertions(+) > create mode 100644 drivers/phy/phy-qcom-ipq806x-sata.c > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index 16a2f06..b7b6bce 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -178,4 +178,11 @@ config PHY_XGENE > help > This option enables support for APM X-Gene SoC multi-purpose PHY. > . . <snip> . . > + > +static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev) > +{ > + struct qcom_ipq806x_sata_phy *phy; > + struct device *dev = &pdev->dev; > + struct resource *res; > + struct phy_provider *phy_provider; > + struct phy *generic_phy; > + int ret; > + > + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); > + if (!phy) { > + dev_err(dev, "%s: failed to allocate phy\n", __func__); > + return -ENOMEM; > + } > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + phy->mmio = devm_ioremap_resource(dev, res); > + if (IS_ERR(phy->mmio)) > + return PTR_ERR(phy->mmio); > + > + generic_phy = devm_phy_create(dev, &qcom_ipq806x_sata_phy_ops, NULL); > + if (IS_ERR(generic_phy)) { > + dev_err(dev, "%s: failed to create phy\n", __func__); > + return PTR_ERR(generic_phy); > + } > + > + phy_set_drvdata(generic_phy, phy); > + > + phy->cfg_clk = devm_clk_get(dev, "cfg"); > + if (IS_ERR(phy->cfg_clk)) { > + dev_err(dev, "Failed to get sata cfg clock\n"); > + return PTR_ERR(phy->cfg_clk); > + } > + > + ret = clk_prepare_enable(phy->cfg_clk); > + if (ret) > + return ret; > + > + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); > + if (IS_ERR(phy_provider)) { > + clk_disable_unprepare(phy->cfg_clk); > + dev_err(dev, "%s: failed to register phy\n", __func__); > + return PTR_ERR(phy_provider); > + } > + > + return 0; > +} > + > +static int qcom_ipq806x_sata_phy_remove(struct platform_device *pdev) > +{ > + struct qcom_ipq806x_sata_phy *phy = platform_get_drvdata(pdev); Where is platform_set_drvdata()? Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html