On Fri, Sep 19, 2014 at 1:25 AM, Alexander Gordeev <agordeev@xxxxxxxxxx> wrote:
> As described in AHCI v1.0 specification chapter 10.6.2.2
> "Multiple MSI Based Messages" generation of interrupts
> is not controlled through the HOST_IRQ_STAT register.
>
> Considering MMIO access is expensive remove unnecessary
> reading and writing of HOST_IRQ_STAT register.
>
> Further, serializing access to the host data is no longer
> needed and the interrupt service routine can avoid competing
> on the host lock.
>
> Signed-off-by: Alexander Gordeev <agordeev@xxxxxxxxxx>
> Suggested-by: "Jiang, Dave" <dave.jiang@xxxxxxxxx>
> Cc: linux-ide@xxxxxxxxxxxxxxx
> ---
> drivers/ata/ahci.h | 1 +
> drivers/ata/libahci.c | 54 ++++++++-------------------------------------------
> 2 files changed, 9 insertions(+), 46 deletions(-)
>
> diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
> index c12f590..b8e117a 100644
> --- a/drivers/ata/ahci.h
> +++ b/drivers/ata/ahci.h
> @@ -305,6 +305,7 @@ struct ahci_port_priv {
> unsigned int ncq_saw_dmas:1;
> unsigned int ncq_saw_sdb:1;
> u32 intr_status; /* interrupts to handle */
> + spinlock_t intr_lock; /* protects intr_status */
Why introduce a new lock? Can't we switch to per-ata port locking
rather than ata_host locking?
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
