Re: [PATCH v3 0/2] phy: qcom: Add driver for QCOM APQ8064 SATA PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 14/07/14 11:30, Kishon Vijay Abraham I wrote:


On Monday 14 July 2014 02:17 PM, Srinivas Kandagatla wrote:
Hi Kishon,

First patch in this series adds support to the APQ8064 SATA PHY.
Second patch updates the existing Kumar gala's device tree PHY bindings
with APQ8064 soc specific compatible.

Eventhough there are two seperate drivers for both IPQ and APQ SOCs,
the bindings are exactly same, so I did not create new bindings document.

Er.. create a separate binding.

Ok, no issues.

Could you please pick these patches for v3.17.

Sure. please rebase to linux-phy next and re-send.
I will do it.

thanks,
srini

Thanks
Kishon

Changes since v2:
	- added usleep_range in poll timeout as discussed
		with Bartlomiej Zolnierkiewicz.
	- Added missing pdev_set_drvdata spotted by
		Bartlomiej Zolnierkiewicz

Changes since v1:
	- included DT bindings in the series.

Thanks,
srini

Srinivas Kandagatla (2):
   phy: qcom: Add driver for QCOM APQ8064 SATA PHY
   phy: qcom: Update APQ8064 PHY device tree bindings

  Documentation/devicetree/bindings/phy/qcom-phy.txt |   3 +-
  drivers/phy/Kconfig                                |   7 +
  drivers/phy/Makefile                               |   1 +
  drivers/phy/phy-qcom-apq8064-sata.c                | 288 +++++++++++++++++++++
  4 files changed, 298 insertions(+), 1 deletion(-)
  create mode 100644 drivers/phy/phy-qcom-apq8064-sata.c

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux